Synthesis of novel isothiazolopyridines and their in vitro evaluation against Mycobacterium and Propionibacterium acnes

In this paper we describe synthesis, structures and some physicochemical properties of 20 isothiazolopyridines 8–13 substituted differently into an isothiazole ring as well as their in vitro antibacterial assays against Mycobacterium tuberculosis H37Rv, Mycobacterium fortuitum PCM 672 and Propionibacterium acnes PCM 2400. Compound 13a was found to be the most active derivative against M. tuberculosis H37Rv, demonstrating 100% growth inhibition of microorganisms in the primary screen (minimum inhibitory concentration [MIC] 6.25 μg/mL). Nineteen of the prepared compounds were evaluated against M. fortuitum PCM 672 and P. acnes PCM 2400 and only compounds 9 and 12d exhibited excellent activity against individual strains of microorganisms with MIC₉₀ <1 μg/mL. The inhibitory action of the remaining isothiazolopyridines towards the tested strains of the microorganism was low, absent, or a non-linear correlation prohibited accurate determination of MIC values. Unexpectedly, seven of the remaining isothiazolopyridines tested against M. fortuitum and P. acnes stimulated growth of the microorganisms in the range 10–50% or even more (10b) under experimental conditions.     

Shigella flexneri 3a Outer Membrane Protein C Epitope Is Recognized by Human Umbilical Cord Sera and Associated with Protective Activity

Shigella flexneri 3a is one of the five major strains of the Shigella genus responsible for dysentery, especially among children, in regions of high poverty and poor sanitation. The outer membrane proteins (OMP) of this bacterium elicit immunological responses and are considered a prime target for vaccine development. When injected into mice they elicit a protective immunological response against a lethal dose of the pathogen. The OMPs from S. flexneri 3a were isolated and resolved by two-dimension-SDS-PAGE. Two 38-kDa spots were of particular interest since in our earlier studies OMPs of such molecular mass were found to interact with umbilical cord sera. These two spots were identified as OmpC by ESI-MS/MS spectrometry. By DNA sequencing, the ompC gene from S. flexneri 3a was identical to ompC from S. flexneri 2a [Gene Bank: 24113600]. A 3D model of OmpC was built and used to predict B-cell type (discontinuous) antigenic epitopes. Six epitopes bearing the highest score were selected and the corresponding peptides were synthesized. Only the peptides representing loop V of OmpC reacted strongly with the umbilical cord serum immunoglobulins. To determine which amino acids are essential for the antigenic activity of the epitope, the loop V was scanned with a series of dodecapeptides. The peptide RYDERY was identified as a minimal sequence for the loop V epitope. Truncation at either the C- or N-terminus rendered this peptide inactive. Apart from C-terminal tyrosine, substitution of each of the remaining five amino acids with glycine, led to a precipitous loss of immunological activity. This peptide may serve as a ligand in affinity chromatography of OmpC-specific antibodies and as a component of a vaccine designed to boost human immune defenses against enterobacterial infections.     

Binge Drinking and Blood Pressure: Cross-Sectional Results of the HAPIEE Study

Objectives

To investigate whether binge drinking pattern influences blood pressure independently from drinking volume or whether it modifies the effect of volume of drinking.

Methods

We used cross-sectional data from population samples of 7559 men and 7471 women aged 45–69 years in 2002-05, not on antihypertensive medication, from Russia, Poland and Czech Republic. Annual alcohol intake, drinking frequency and binge drinking (≥100 g in men and ≥60 g in women in one session at least once a month) were estimated from graduated frequency questionnaire. Blood pressure was analysed as continuous variables (systolic and diastolic pressure) and a binary outcome (≥140/90 mm Hg).

Results

In men, annual alcohol intake and drinking frequency were strongly associated with blood pressure. The odds ratio of high blood pressure for binge drinking in men was 1.62 (95% CI 1.45–1.82) after controlling for age, country, body mass index, education and smoking; additional adjustment for annual alcohol intake reduced it to 1.20 (1.03–1.39). In women, the fully adjusted odds ratio of high blood pressure for binge drinking was 1.31 (1.05–1.63). Binge drinking did not modify the effect of annual alcohol intake. Consuming alcohol as wine, beer or spirits had similar effects.

Conclusions

The results suggest that the independent long-term effect of binge drinking was modest, that binge drinking did not modify the effect of alcohol intake, and that different alcoholic beverages had similar effects on blood pressure.     

In Search of Functional Advantages of Knots in Proteins

We analysed the structure of deeply knotted proteins representing three unrelated families of knotted proteins. We looked at the correlation between positions of knotted cores in these proteins and such local structural characteristics as the number of intra-chain contacts, structural stability and solvent accessibility. We observed that the knotted cores and especially their borders showed strong enrichment in the number of contacts. These regions showed also increased thermal stability, whereas their solvent accessibility was decreased. Interestingly, the active sites within these knotted proteins preferentially located in the regions with increased number of contacts that also have increased thermal stability and decreased solvent accessibility. Our results suggest that knotting of polypeptide chains provides a favourable environment for the active sites observed in knotted proteins. Some knotted proteins have homologues without a knot. Interestingly, these unknotted homologues form local entanglements that retain structural characteristics of the knotted cores.     

A Novel Attempt to Standardize Results of CFD Simulations Basing on Spatial Configuration of Aortic Stent-Grafts

Currently, studies connected with Computational Fluid Dynamic (CFD) techniques focus on assessing hemodynamic of blood flow in vessels in different conditions e.g. after stent-graft’s placement. The paper propose a novel method of standardization of results obtained from calculations of stent-grafts'' “pushing forces” (cumulative WSS—Wall Shear Stress), and describes its usefulness in diagnostic process. AngioCT data from 27 patients were used to reconstruct 3D geometries of stent-grafts which next were used to create respective reference cylinders. We made an assumption that both the side surface and the height of a stent-graft and a reference cylinder were equal. The proposed algorithm in conjunction with a stent-graft “pushing forces” on an implant wall, allowed us to determine which spatial configuration of a stent-graft predispose to the higher risk of its migration. For stent-grafts close to cylindrical shape (shape factor φ close to 1) WSS value was about 267Pa, while for stent-grafts different from cylindrical shape (φ close to 2) WSS value was about 635Pa. It was also noticed that deformation in the stent-graft’s bifurcation part impaired blood flow hemodynamic. Concluding the proposed algorithm of standardization proved its usefulness in estimating the WSS values that may be useful in diagnostic process. Angular bends or tortuosity in bifurcations of an aortic implant should be considered in further studies of estimation of the risk of implantation failure.     

The Relationships between Polymorphisms in Genes Encoding the Growth Factors TGF-β1, PDGFB,EGF, bFGF and VEGF-A and the Restenosis Process in Patients with Stable Coronary Artery Disease Treated with Bare Metal Stent

Background

Neointima forming after stent implantation consists of vascular smooth muscle cells (VSMCs) in 90%. Growth factors TGF-β1, PDGFB, EGF, bFGF and VEGF-A play an important role in VSMC proliferation and migration to the tunica intima after arterial wall injury. The aim of this paper was an analysis of functional polymorphisms in genes encoding TGF-β1, PDGFB, EGF, bFGF and VEGF-A in relation to in-stent restenosis (ISR).

Materials and Methods

265 patients with a stable coronary artery disease (SCAD) hospitalized in our center in the years 2007–2011 were included in the study. All patients underwent stent implantation at admission to the hospital and had another coronary angiography performed due to recurrence of the ailments or a positive result of the test assessing the coronary flow reserve. Angiographically significant ISR was defined as stenosis >50% in the stented coronary artery segment. The patients were divided into two groups–with angiographically significant ISR (n = 53) and without significant ISR (n = 212). Additionally, the assessment of late lumen loss (LLL) in vessel was performed. EGF rs4444903 polymorphism was genotyped using the PCR-RFLP method whilst rs1800470 (TGFB1), rs2285094 (PDGFB) rs308395 (bFGF) and rs699947 (VEGF-A) were determined using the TaqMan method.

Results

Angiographically significant ISR was significantly less frequently observed in the group of patients with the A/A genotype of rs1800470 polymorphism (TGFB1) versus patients with A/G and G/G genotypes. In the multivariable analysis, LLL was significantly lower in patients with the A/A genotype of rs1800470 (TGFB1) versus those with the A/G and G/G genotypes and higher in patients with the A/A genotype of the VEGF-A polymorphism versus the A/C and C/C genotypes. The C/C genotype of rs2285094 (PDGFB) was associated with greater LLL compared to C/T heterozygotes and T/T homozygotes.

Conclusions

The polymorphisms rs1800470, rs2285094 and rs6999447 of the TGFB1, PDGFB and VEGF-A genes, respectively, are associated with LLL in patients with SCAD treated by PCI with a metal stent implantation.     

Cis-regulatory elements used to control gene expression in plants

Plant biotechnology is a dynamically developing science, which comprises many fields of knowledge. Novel plant genetic engineering findings highly influence the improvement of industrial production. These findings mostly concern cis-regulatory elements, which are sequences controlling gene expression at all developmental stages. They comprise of promoters, enhancers, insulators and silencers, which are used to construct synthetic expression cassettes. Examples of most important cis-regulatory elements are reviewed in the present paper. Variability among core promoters content and distal promoter regions impedes evaluation of interactions between them during the artificial promoters construction. Synthetic promoters and artificial expression cassettes trigger a significant increase in gene expression level, better properties and quality of a product. Accumulating knowledge about gene promoters, cis sequences and their cooperating factors allows uniform expression systems and highly predictable results.     

The use of dialdehyde starch derivatives in the phytoremediation of soils contaminated with heavy metals

Products of the reaction between dialdehyde starch and Y-NH₂ compounds (e.g. semicarbazide or hydrazine) are effective ligands for metal ions. The usefulness of these derivatives was tested in the experiment, both in terms of the immobilization of heavy metal ions in soil and the potential application in phytoextraction processes. The experimental model comprised maize and the ions of such metals as: Zn(II), Pb(II), Cu(II), Cd(II), and Ni(II). The amount of maize yield, as well as heavy metal content and uptake by the aboveground parts and roots of maize, were studied during a three-year pot experiment. The results of the study indicate the significant impact of heavy metals on reduced yield and increased heavy metal content in maize. Soil-applied dialdehyde starch derivatives resulted in lower yields, particularly disemicarbazone (DASS), but in heavy metal-contaminated soils they largely limited the negative impact of these metals both on yielding and heavy metal content in plants, particularly dihydrazone (DASH). It was demonstrated that the application of dihydrazone (DASH) to a soil polluted with heavy metals boosted the uptake of Zn, Pb, Cu, and Cd from the soil, hence there is a possibility to use this compound in the phytoextraction of these metals from the soil. Decreased Ni uptake was also determined, hence the possibility of using this compound in the immobilization of this metal. The study showed that dialdehyde starch disemicarbazone was ineffective in the discussed processes.