Influence of development rate on pharyngeal teeth formula in <Emphasis Type="Italic">Abramis brama</Emphasis> (L.) bream: Experimental cata

An experiment on acceleration and retardation of ontogeny with thyroid manipulation has revealed direct changes in definitive dentition of pharyngeal bones in Abramis brama bream. As development rate accelerates, the number of teeth reduces to the formula 5-4. When development rate is retarded, this number increases to the formula 6-5. Moreover, an additional minor row of teeth (1.6–5.1, 2.6–5.2) is formed. The observed changes in tooth numbers exceed the known variability in natural populations of bream. It is assumed that heterochronies lead to the changes in the number of teeth.     

Fenibut binding with bicuculline-insensitive GABA receptors in the rat brain

(+/-) Fenibut beta-phenyl-GABA) was not able to displace 3H-GABA in Na+ independent GABA binding (IC50 greater than 250 microM). Nevertheless, (+/-) fenibut and (+/-) baclofen effectively displaced 3H-GABA in Ca2+ dependent GABA binding in the presence of 50 microM (+) bicuculline. (+/-) Fenibut was less potent in this respect. It is suggested that fenibut may act via bicuculline-insensitive GABA receptors.     

Neuromuscular, anaerobic, and aerobic performance characteristics of elite power athletes

Various aspects of neuromuscular, anaerobic, and aerobic performance capacity were investigated in four powerlifters, seven bodybuilders, and three wrestlers with a history of specific training for several years. The data (means +/- SD) showed that the three subject groups possessed similar values for maximal isometric force per unit bodyweight (50.7 +/- 9.6, 49.3 +/- 4.1, and 49.3 +/- 10.9 N/kg, respectively). However, significant (P less than 0.05) differences were observed in the times for isometric force production, so that e.g., times to produce a 30% force level were shorter for the wrestlers and bodybuilders (28.3 +/- 3.1 and 26.4 +/- 6.6 ms) than that (53.3 +/- 23.7 ms) for the powerlifters. Utilization of elastic energy by the wrestlers was significantly (P less than 0.05) better than that of the other two subject groups, as judged from differences between the counter-movement and squat jumps at 0, 40, and 100 kg's loads. No differences were observed between the groups in anaerobic power in a 1-min maximal test, but the values for VO2 max were higher (P less than 0.05) among the wrestlers and bodybuilders (57.8 +/- 6.6 and 50.8 +/- 6.8 ml X kg-1 X min-1) as compared to the powerlifters (41.9 +/- 7.2 ml X kg-1 X min-1). Within the limitations of the subject sample, no differences of a statistical significancy were observed between the groups in fibre distribution, fibre areas, or the area ratio of fast (FT) and slow (ST) twitch fibres in vastus lateralis.(ABSTRACT TRUNCATED AT 250 WORDS)     

Development of a real-time TaqMan assay to detect <Emphasis Type="Italic">mendocina</Emphasis> sublineage <Emphasis Type="Italic">Pseudomonas</Emphasis> species in contaminated metalworking fluids

A TaqMan quantitative real-time polymerase chain reaction (qPCR) assay was developed for the detection and enumeration of three Pseudomonas species belonging to the mendocina sublineage (P. oleovorans, P. pseudoalcaligenes, and P. oleovorans subsp. lubricantis) found in contaminated metalworking fluids (MWFs). These microbes are the primary colonizers and serve as indicator organisms of biodegradation of used MWFs. Molecular techniques such as qPCR are preferred for the detection of these microbes since they grow poorly on typical growth media such as R2A agar and Pseudomonas isolation agar (PIA). Traditional culturing techniques not only underestimate the actual distribution of these bacteria but are also time-consuming. The primer–probe pair developed from gyrase B (gyrB) sequences of the targeted bacteria was highly sensitive and specific for the three species. qPCR was performed with both whole cell and genomic DNA to confirm the specificity and sensitivity of the assay. The sensitivity of the assay was 10¹ colony forming units (CFU)/ml for whole cell and 13.7 fg with genomic DNA. The primer–probe pair was successful in determining concentrations from used MWF samples, indicating levels between 2.9 × 10³ and 3.9 × 10⁶ CFU/ml. In contrast, the total count of Pseudomonas sp. recovered on PIA was in the range of <1.0 × 10¹ to 1.4 × 10⁵ CFU/ml for the same samples. Based on these results from the qPCR assay, the designed TaqMan primer–probe pair can be efficiently used for rapid (within 2 h) determination of the distribution of these species of Pseudomonas in contaminated MWFs.     

Synthesis of novel acetylene-containing amino acids

Summary.  Novel synthetic procedures for the modification of non-proteinogenic acetylene-containing amino acids have been developed. The functionalization either proceeds via zinc/copper-mediated introduction of alkyl substituents, or via tungsten-catalyzed ring-closing alkyne metathesis reactions. Received March 28, 2002 Accepted October 3, 2002 Published online December 18, 2002 Acknowledgements These investigations are supported (in part) by the Netherlands Research Council for Chemical Sciences (CW) with financial aid from the Netherlands Technology Foundation (STW). Authors' address: Floris P. J. T. Rutjes, Prof. Dr., Department of Organic Chemistry, University of Nijmegen, Toernooiveld 1, NL-6525 ED Nijmegen, The Netherlands, E-mail: rutjes@sci.kun.nl  2, selected data: ¹H NMR (300 MHz, CDCl₃) δ 5.32 (d, J = 7.7 Hz, 1H), 4.44–4.40 (m, 1H), 3.76 (s, 3H), 2.75–2.73 (d, J = 5.0 Hz, 2H), 1.44 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.0, 155.0, 80.3, 74.6, 52.6, 51.9, 41.7, 28.3, 24.0; mp = 55°C.  Typical procedure for 5: zinc dust (116 mg, 1.408 mmol) was weighed into a 20 mL flask, which was repeatedly evacuated (with heating using a heat gun) and flushed with argon. Dry DMF (0.5 mL, distilled from CaH₂) and 1,2-dibromoethane (9.2 μL, 0.106 mmol) were added and the flask was heated at 80°C for 40 min. The reaction mixture was allowed to cool to room temperature, trimethylsilyl chloride (4 μL, 0.035 mmol) was added and the resulting mixture was stirred vigorously for a further 30 min under argon. Iodocyclohexane (69 μl, 0.528 mmol) was added and stirred at room temperature for 3 h more after which stirring was ceased to settle the zinc. CuCN (41 mg, 0.458 mmol) and LiCl (40 mg, 0.915 mmol) were heated to 150°C for 2 h and cooled to room temperature. Addition of DMF (1 mL) formed a soluble CuCN·2LiCl complex within 5 min. After cooling the Cu-complex to −15°C, the organozinc reagent was added dropwise followed by the bromoacetylene 2 (116 mg, 0.352 mmol). The mixture was allowed to stir overnight at room temperature. Water was added and the suspension was extracted using heptane, washed with brine, dried (MgSO₄) and concentrated. Purification using flash column chromatography (10% EtOAc in heptane) yielded 5 (100 mg, 81%) as a colorless oil. 5: IR ν 3355, 2929, 2852, 2359, 2337, 1749, 1717, 1498, 1447, 1365, 1251, 1181, 1060; ¹H NMR (300 MHz, CDCl₃) δ 5.28 (d, J = 7.7 Hz, 1H), 4.43–4.38 (m, 1H), 3.73 (s, 3H), 2.69–2.63 (m, 2H), 2.13 (m, 1H), 1.73–1.22 (m, 10H), 1.43 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.4, 155.0, 88.1, 79.9, 73.8, 52.3, 32.7, 32.7, 28.8, 28.2, 25.8, 24.6, 23.1; HRMS (EI): calculated for C₁₇H₂₇NO₄ 309.1940, found 309.1937.  A solution of the tungsten catalyst (7 mg, 10 mol%) in C₆H₅Cl (2 mL) was treated with a solution of 14 (49.0 mg, 0.120 mmol) in C₆H₅Cl (5.0 mL) under an argon atmosphere and the resulting mixture was heated at 80°C for 3 h. Evaporation followed by flash column chromatography (80% EtOAc in heptane) afforded 15 (21.0 mg, 50%; 64% after correction for starting material) and 14 (16 mg, 33%) as colorless oils. 15: [α]_D =–14.6 (c = 1, CH₂Cl₂); IR ν 3313, 2931, 2865, 2249, 1744, 1667, 1520, 1366, 1170; ¹H NMR (400 MHz, CDCl₃) δ 7.14 (d, J = 8.7 Hz, 1H), 6.08 (d, J = 8.3 Hz, 1H), 4.78 (q, J = 6.8 Hz, 1H), 4.27 (q, J = 7.9 Hz, 1H), 3.73 (s, 3H), 2.17–2.15 (m, 4H), 2.07–1.96 (m, 2H), 1.79–1.52 (m, 4H), 1.45 (s, 9H), 0.89–0.83 (m, 2H); ¹³C NMR (100 MHz, CDCl₃) δ 173.2, 171.8, 155.8, 80.4, 80.2, 79.3, 53.8, 52.5, 51.2, 32.8 (2×), 28.1, 24.6, 24.2, 18.3 (2×); HRMS (EI): calculated for C₁₈H₂₈N₂O₅     

The Role of the Vascular Factor in the Reorganization of Water Metabolism in Denervated Liver after Bacterial Endotoxin Poisoning

Intoxication with bacterial lipopolysaccharide (endotoxin) is accompanied by considerable rearrangements in the systems of blood microcirculation and water metabolism of the liver. These rearrangements are manifested as increased sinusoid area, changed total area of the cytoplasm and nuclei as well as the nucleocytoplasmic ratio in hepatocytes, increased content of total water in the organ, and changed magnetic relaxation properties (spin-lattice and spin-spin relaxation times). Preliminary parasympathetic denervation of the liver (vagotomy) changes the pattern of the organ response to bacterial endotoxin poisoning as indicated by the kinetics of studied morphological and biophysical parameters.     

Male-Driven Differences in Chimpanzee (<Emphasis Type="Italic">Pan troglodytes</Emphasis>) Population Genetic Structure Across Three Habitats in Cameroon and Nigeria

Complex ecological pressures affect the social dynamics of many primate species, but it is unclear how they affect primate speciation. Molecular tools are often used to answer questions about the evolutionary histories and social systems of primates. Mitochondrial DNA (mtDNA), in particular, is frequently used to answer many of these questions, but because it is passed from mothers to offspring it reveals only the histories of females. In many species, including chimpanzees, females generally disperse from their natal groups while males are philopatric, and thus differences in dispersal patterns likely leave different signatures in the genome. We previously analyzed samples from 187 unrelated male and female chimpanzees in Nigeria and Cameroon using 21 autosomal microsatellites and mtDNA sequences. Here, we examine the contributions of males and females in shaping the genetic history of these chimpanzees by genotyping a subset of 56 males at 12 Y-chromosome microsatellites. We found that Y-chromosome population structure differed from the results of analysis of mtDNA haplotypes. The results also revealed that males in rainforest habitats (Guinean and Congolian rainforests) are more closely related to one another than those inhabiting the savanna-woodland mosaic ecotone in central Cameroon. In contrast, the pattern of female relatedness did not differ across habitats. We hypothesize that these differences in population structure and patterns of relatedness among males in different habitat types may be due to differences in the community dynamics of chimpanzees in the ecotone vs. rainforests, and that these factors contribute to making Cameroon an engine of diversification for chimpanzees. Broadly, these results demonstrate the importance of habitat variation in shaping social systems, population genetics, and primate speciation.     

The next step in biology: A periodic table?

Systems biology is an approach to explain the behaviour of a system in relation to its individual components. Synthetic biology uses key hierarchical and modular concepts of systems biology to engineer novel biological systems. In my opinion the next step in biology is to use molecule-to-phenotype data using these approaches and integrate them in the form a periodic table. A periodic table in biology would provide chassis to classify, systematize and compare diversity of component properties vis-a-vis system behaviour. Using periodic table it could be possible to compute higher-level interactions from component properties. This paper examines the concept of building a bio-periodic table using protein fold as the fundamental unit.