3D Vertically Aligned and Interconnected Porous Carbon Nanosheets as Sulfur Immobilizers for High Performance Lithium‐Sulfur Batteries

A unique nanostructure of 3D and vertically aligned and interconnected porous carbon nanosheets (3D‐VCNs) is demonstrated by a simple carbonization of agar. The key feature of 3D‐VCNs is that they possess numerous 3D channels with macrovoids and mesopores, leading to high surface area of 1750 m² g^?1, which play an important role in loading large amount of sulfur, while vertically aligned microporous carbon nanosheets act as the multilayered physical barrier against polysulfides anions and prevent their dissolution in the electrolyte due to strong adsorption during cycling process. As a result, the 3D hybrid (3D‐S‐VCNs) infiltered with 68.3 wt% sulfur exhibits a high and stable reversible capacity of 844 mAh g^?1 at the current density of 837 mA g^?1 with excellent Coulombic efficiency ≈100%, capacity retention of ≈80.3% over 300 cycles, and good rate ability (the reversible capacity of 738 mAh g^?1 at the high current density of 3340 mA g^?1). The present work highlights the vital role of the introduction of 3D carbon nanosheets with macrovoids and mesopores in enhancing the performance of LSBs.     

Effect of organic carbon sources and environmental factors on cell growth and lipid content of Pavlova lutheri

The present study aimed to investigate the effects of organic carbon sources, cultivation methods, and environmental factors on growth and lipid content of Pavlova lutheri for biodiesel production. In the 250-mL flask bioreactors, P. lutheri was cultivated in the modified artificial seawater (ASW) medium containing glucose, glycerol, sodium acetate, or sucrose as an organic carbon substrate. The effects of different growth conditions (phototrophic, mixotrophic, and heterotrophic) and environmental factors such as photoperiod, light intensity, and salinity were evaluated. Growth of P. lutheri was inhibited under heterotrophy but was enhanced in mixotrophy as compared to phototrophy. Biomass and lipid content of P. lutheri were significantly (p < 0.05) affected by changing photoperiod, light intensity, and salinity. Higher biomass concentration and lipid content were observed at a light intensity of 100 ± 2 μmol photons m−2 s−1, 18 h photoperiod, and 30% salinity, in a modified ASW medium supplemented with 10 mmol sucrose. An increase in biomass concentration from 320 ± 25.53 to 1106 ± 18.52 mg L−1 and high lipid content of 31.11 ± 1.65% (w/w) were observed with the optimized culture conditions, demonstrating a significant (p < 0.05) enhancement in biomass and lipid content due to the improved culture conditions. The present study emphasizes the possible use of sucrose for biomass and lipid production with P. lutheri under the optimized culture conditions. Using low-cost and relatively easy accessible feedstock such as sucrose would be a valuable alternative for growing microalgae with enhanced lipid content.     

A comparative study of bacterial diversity based on culturable and culture-independent techniques in the rhizosphere of maize (Zea mays L.)

ObjectiveMaize is an important crop for fodder, food and feed industry. The present study explores the plant-microbe interactions as alternative eco-friendly sustainable strategies to enhance the crop yield.MethodologyBacterial diversity was studied in the rhizosphere of maize by culture-dependent and culture-independent techniques by soil sampling, extraction of DNA, amplification of gene of interest, cloning of desired fragment and library construction.ResultsCulturable bacteria were identified as Achromobacter, Agrobacterium, Azospirillum, Bacillus, Brevibacillus, Bosea, Enterobacter, Microbacterium, Pseudomonas, Rhodococcus, Stenotrophomonas and Xanthomonas genera. For culture-independent approach, clone library of 16S ribosomal RNA gene was assembled and 100 randomly selected clones were sequenced. Majority of the sequences were related to Firmicutes (17%), Acidobacteria (16%), Actinobacteria (17%), Alpha-Proteobacteria (7%), Delta-proteobacteria (4.2%) and Gemmatimonadetes (4.2%) However, some of the sequences (30%) were novel that showed no homologies to phyla of cultured bacteria in the database. Diversity of diazotrophic bacteria in the rhizosphere investigated by analysis of PCR-amplified nifH gene sequence that revealed abundance of sequences belonging to genera Azoarcus (25%), Aeromonas (10%), Pseudomonas (10%). The diazotrophic genera Azotobacter, Agrobacterium and Zoogloea related nifH sequences were also detected but no sequence related to Azospirillum was found showing biasness of the growth medium rather than relative abundance of diazotrophs in the rhizosphere.ConclusionThe study provides a foundation for future research on focussed isolation of the Azoarcus and other diazotrophs found in higher abundance in the rhizosphere.     

Physical and chemical mutagens improved Sporotrichum thermophile,strain ST20 for enhanced Phytase activity

ObjectivePhosphorous is an essential micronutrient of plants and involved in critical biological functions. In nature, phosphorous is mostly present in immobilized inorganic mineral and in the fixed organic form including phytic acid and phosphoesteric compounds. However, the bioavailability of bound phosphorous could be enhanced by the use of phosphate solubilizing microorganisms such as bacteria and fungi. The phytases are widespread in an environment and have been isolated from different sources comprising bacteria and fungi.MethodologyIn current studies, we show the successful use of gamma rays and EMS (Ethyl Methane Sulphonate) mutagenesis for enhanced activity of phytases in a fungal strain Sporotrichum thermophile.ResultsWe report an improved strain ST2 that could produce a clear halo zone around the colony, up to 24 mm. The maximum enzymatic activity was found of 382 U/mL on pH 5.5. However, the phytase activity was improved to 387 U/ml at 45 °C. We also report that the mutants produced through EMS showed the greater potential for phytase production.ConclusionThe current study highlights the potential of EMS mutagenesis for strain improvement over physical mutagens.     

Phorate triggers oxidative stress and mitochondrial dysfunction to enhance micronuclei generation and DNA damage in human lymphocytes

Herein, we studied phorate for its toxicological effects in human lymphocytes. Phorate treatment for 3 h has induced significant increase in the lymphocytic DNA damage. Compared to control, comet data from highest concentration of phorate (1000 µM) showed 8.03-fold increase in the Olive tail moment (OTM). Cytokinesis blocked micronucleus (CBMN) assay revealed 6.4-fold increase in binucleated micronucleated (BNMN) cells following the exposure with phorate (200 µM) for 24 h. The nuclear division index (NDI) in phorate (200 µM) treated cells reduced to 1.8 vis-à-vis control cells showed NDI of 1.94. Comparative to untreated control, 60.43% greater DCF fluorescence was quantitated in lymphocytes treated with phorate (500 µM), affirming reactive oxygen species (ROS) generation and oxidative stress. Flow cytometric data of phorate (200 µM) treated lymphocytes showed 81.77% decline in the fluorescence of rhodamine 123 (Rh123) dye, confirming the perturbation of mitochondrial membrane potential (ΔΨm). Calf thymus DNA (ct-DNA) treated with phorate (1000 µM) exhibited 2.3-fold higher 8-Hydroxy-2′-deoxyguanosine (8-oxodG) DNA adduct formation, signified the oxidative DNA damage. The alkaline unwinding assay revealed 4.0 and 6.5 ct-DNA strand breaks when treated to phorate and phorate-Cu (II) complex. Overall, the data unequivocally suggests the cyto- and genotoxic potential of phorate in human lymphocytes, which may induce comparable toxicological consequences in persons occupationally or non-occupationally exposed to insecticide phorate.     

Evaluation of groundwater quality using water quality index and its suitability for assessing water for drinking and irrigation purposes: Case study of Sistan and Baluchistan province (Iran)

The present study evaluates the groundwater quality for drinking and agricultural purposes and determines physicochemical characteristics of groundwater in the Sistan and Baluchistan province in Iran. In order to investigate the water quality, sampling was done in 654 open dug wells, the chemical parameters were analyzed, and water quality index was determined. In this regard, Langelier saturation index (LSI), Ryznar Stability index (RSI), Puckorius scaling index (PSI), Larson–Skold index (LS), and Aggressiveness index (AI) were considered to determine water suitability for industrial purposes. Finally, the analytical results were taken to generate the numerical spatial distribution of the parameters using the geographic information system (GIS) environment. According to the results, water sources were less corrosive based on AI and PSI, low and light corrosion according to RSI, and corrosion according to the Larsson–Sckold index. The results of the drinking water quality index showed that 1.2% shared extraction wells were classified as excellent, 52.1% as good, 39% as poor, 6% as very poor, and 1.7% as unsuitable for drinking purpose classes. In addition, irrigating water quality index illustrated that 19.9% and 80.1% wells were placed in the “excellent” and “Good” classes, respectively. Also, the quality of water in this study was categorized as brackish.     

Recent Advances of Using Ionic Liquids for Biopolymer Extraction and Processing

The evolution of petroleum‐derived polymers is one of the crowning accomplishments of the past century. Although the significant economic gains from this industrial model of resource utilization are achieved, the environmental impacts are fatal. One of the principles of sustainable development is to replace such polymers with potential alternatives derived from renewable materials. Biopolymers derived from natural resources afford a new, versatile, environmentally benign feedstock that could exhibit closed‐loop life cycles as part of a future material's industrial ecology. However, the solubility and processability of biopolymer materials provoke a serious bottleneck owing to their dense networks of inter ‐ and intramolecular bondings and structural heterogeneity. Recently, ionic liquids (ILs) have emerged as promising green solvents and acquired augmented appreciation for their peerless power of biopolymer processing. Among the fourteen principle of green chemistry, the two key elements encourage the exploitation of renewable raw materials by using environmentally benign solvents that cover in dissolution of biopolymers using ILs. This mini review represents a brief overview of the comprehensive ILs assisted extraction and processing of various biopolymeric materials for value‐added applications.     

pH dependent effects of sodium ions on dextransucrase activity in Streptococcus mutans

Dextransuccrase (E.C 2.4.1.5) is a key enzyme in S. mutans for the metabolism of sucrose which helps in the adherence and accumulation of bacteria on tooth surface leading to the formation of dental caries. Dextransuccrase resembles in its catalytic properties with the brush boarder sucrase and exhibits pH dependent inhibitory and stimulatory effects in response to Na⁺. In this communication we studied the effect of monovalent cations on the activity of dextransuccrase from S. mutans. The percentage inhibition of dextransuccrase was 65% at 0.5 mM NaCl which enhanced to 90% at 20 mM sodium concentration. However there was no effect on dextransucrase activity in presence of other monovalent cations (Rb⁺, Cs⁺, and K⁺) tested. Enzyme activity was enhanced 20–24% in acidic pH but was strongly inhibited (59–89%) around neutral and alkaline pH by 0.5–2.0 mM sodium chloride. Upon dialysis, 86% of enzyme activity was restored to control values. There was no effect of 2 mM NaCl on glucosyltransferase activity of the enzyme. Kinetic studies revealed that enzyme showed biphasic effects in response to Na⁺ ions. At acidic pH the enzyme exhibited mixed type of activation affecting both Vmax and Km, while in alkaline pH, the enzyme showed V- type effect reducing Vmax by 74% without affecting Km. The effects of sodium ions on dextransuccrase activity were specific, thus it can be useful to block its catalytic activity, and reducing the cariogenic potential of S. mutans.     

Comparative analysis of the methods used for finding surface energy to investigate protein interaction behavior on chromatographic supports

Hydrophobic interaction chromatography, an important and effective purification strategy, is generally used for the purification of variety of biomolecules. A basic understanding of the protein interaction behavior is required to effectively separate these biomolecules. A colloidal type extended Derjaguin, Landau, Verwey, and Overbeek calculations were utilized to study the interactions behavior of model proteins to commercially available hydrophobic chromatographic materials that is, Toyopearl Phenyl 650C and Toyopearl Butyl 650C. Physicochemical properties of selected model proteins were achieved by contact angle and zeta potential measurements. The contact angle of chromatographic materials used was achieved through sessile drop method on disrupted beads and capillary penetration method (CPM) on intact beads. The surface properties were further used to calculate the interactions of the proteins to chromatographic supports. The calculated secondary energy minimum of the proteins with the chromatographic materials (from the contact angle values determined through both methods can be correlated with the retention volumes from the real chromatography. The secondary energy minimum values are higher for each protein to the chromatographic materials calculated from the inputs derived through sessile drop method compared to CPM. For instance, immunoglobulin G has secondary energy minimum value of 0.17 kT compared to 0.11 kT, obtained through sessile drop method and CPM, respectively. Average relative values of the energy minimum calculated for all proteins are as 1.51 kT and 1.29 kT for Toyopearl Butyl 650C and Toyopearl Phenyl 650C, respectively, as a conversion factor for estimation of secondary energy minimum for both methods.