Successful disinfection of trumpet mouthpieces using domestic steam disinfection

There have been numerous reports in the literature describing the diversity of microbial flora isolated from woodwind and brass instruments, with potential infection risks for players, especially when such instruments are shared. Steam disinfection has become established as a trusted method of decontamination; however, there have been no reports on the employment of this technology to disinfect parts of musical instruments, hence it was the aim of this study to examine the fate of bacterial and yeast pathogens on artificially contaminated trumpet mouthpieces and to evaluate whether such disinfection is an effective method of disinfection for such instrument parts. Trumpet mouthpieces were artificially contaminated with 18 microbial strains (17 bacteria from four genera (Enterococcus, Escherichia, Staphylococcus and Streptococcus) and one yeast (Candida)), each at an inoculum density of approximately 1·5 × 10⁷ colony forming units and subjected to a disinfection cycle. The experiment was repeated including 50% (v/v) sterile sputum as soil. No bacteria or yeast organisms were recovered post disinfection, including following recovery and with nonselective cultural enrichment techniques.     

“同时蒸馏-萃取”分析茉莉花香成分

用一种经过改进的“同时蒸馏-萃取”仪提取了茉莉花的香成分,以 GC/MS 和 Kovats保留指数法鉴定了提取物中的28个化学成分。主要成分为:芳樟醇、乙酸苯甲酯、顺-石竹萜烯、榧烯醇、苯甲酸顺-3-己烯酯、邻氨基苯甲酸甲酯、二十三烯-11及吲哚。讨论了鲜花香成分和植物精油的采集与分析方法。     

New technique in optical resolutions

The present paper illustrates the development of an advanced technique in optical resolution. Both of the amphetamine enantiomers can be obtained by a two-step distillation in nearly quantitative yield without any loss of the resolving agent. It is proved that the second-order interactions (H-bond) are sufficient for separation of enantiomers by distillation. © 1994 Wiley-Liss, Inc.     

A break in the nitrogen cycle in aridlands? Evidence from δp15N of soils

We examined the content and isotopic composition of nitrogen within soils of a juniper woodland and found that a cryptobiotic crust composed of cyanobacteria, lichens, and mosses was the predominant source of nitrogen for this ecosystem. Disturbance of the crust has resulted in considerable spatial variability in soil nitrogen content and isotopic composition; intercanopy soils were significantly depleted in nitrogen and had greater abundance of ¹⁵N compared to intra-canopy soils. Variations in the ¹⁵N/¹⁴N ratio for inter- and intra-canopy locations followed similar Rayleigh distillation curves, indicating that the greater ¹⁵N/¹⁴N ratios for inter-canopy soils were due to relatively greater net nitrogen loss. Coverage of cryptobiotic crusts has been reduced by anthropogenic activities during the past century, and our results suggest that destruction of the cryptobiotic crust may ultimately result in ecosystem degradation through elimination of the predominant source of nitrogen input.     

Sterilization of various diameter dead-ended tubes

Effect of tube diameter on steam-in-place sterilization of dead-ended tubes was studied by examining temperature profiles and rates of kill of Bacillus stearothermophilus spores. Time required for sterilization was determined for 9.4-cm-long tubes with various inside diameters from 0.4 to 1.7 cm. Sterilization time increased with decreasing tube diameter. Experimentally measured kill kinetics in 1.7-cm tubes were in agreement with those predicted if measured temperatures represented saturated steam. A 12-log spore reduction was achieved in 1.7-cm diameter vertical and horizontal tubes in less than 63 minutes. For smaller diameter tubes, entrapped air remained after 2 hours and rates of kill were very dependent on position within the tube, tube diameter, and tube orientation with respect to the gravitational vector. Times to achieve a 1-log drop in spore population in the smaller tubes were as much as 10 times greater than those expected if measured temperatures represented saturated steam. Sterilization was not achieved throughout the 0.4-cm tubes. Recommendations are made for including steam bleeders or using prevaccum cycles for these smaller diameter tubes. (c) 1993 John Wiley & Sons, Inc.     

Effects of fungal pretreatment and steam explosion pretreatment on enzymatic saccharification of plant biomass

The effects of consecutive treatments by a lignin-degrading fungus Phanerochaete chrysosporium and by steam explosion for the enzymatic saccharification of plant biomass were studied experimentally, and the optimal operational conditions for obtaining the maximum saccharification were evaluated. Beech wood-meal was treated by the fungus for 98 days and then by high steam temperatures of 170-230 degrees C with steaming times of 0-10 min. The treatment of the wood-meal by fungus prior to steam explosion enhanced the saccharification of wood-meal. The treated wood-meal was separated into holo-cellulose, water soluble material, methanol soluble lignin, and Klason lignin. The saccharification decreased linearly with the increase in the amount of Klason lignin. It was estimated by the equation for the saccharification of exploded wood-meal expressed as a function of steam temperature and steaming time that the maximum saccharification of wood-meal was obtained by consecutive treatments such as fungal treatment for 28 days and then steam explosion at a steam temperature of 215 degrees C and a steaming time of 6.5 min. (c) 1995 John Wiley & Sons, Inc.     

Sulphides and furanones from steam volatile oils of Allium fistulosum and Allium chinense

The constituents of the steam volatile oils from two kinds of Allium fistulosum, A. fistulosum var. caespitosum and A. chinense, have been investigated by GC and spectral techniques (IR, UV, GC/MS, ¹H NMR and ¹³C NMR). The compounds identified from the neutral fraction of each volatile oil included sulphides, thiolanes, alcohols, aldehydes, ketones, furanones and others. Among the sulphur compounds, dipropyl disulphide comprised ca 28% of A. fistulosum oil, ca 23% of A. fistulosum var. caespitosum oil and ca 30% of A. chinense oil. A. fistulosum oil was characterized by a large quantity of tridecan-2-one (ca 52%) and 2,3-dihydro-2-octyl-5-methylfuran-3-one (ca 16%). Also, a large amount of 2,3-dihydro-2-hexyl-5-methylfuran-3-one (ca 20%) was isolated from A. chinense oil.     

Enzymatic hydrolysis of lignocellulosic materials: II. Experimental investigations of theoretical hydrolysis--process models for an increased enzyme recovery

Stream pretreatment of wheat straw solubilized most of the xylan present. Xylose and other sugars were recovered by washing the substrate with water but only a minor part (34%) was monomeric. Treatment of this solutions with celulases and hemicellulases improved the yield of monomeric sugars to 69%, the main product being xylose. Some xylose was also obtained during enzymatic hydrolysis of the solid substrate although the pretreatment step contributed 64% (mean value) of total xylose formed. A reference model, No. 1, and two other models, Nos. 2 and 4, described in the first part of this article series (this issue) have been studied experimentally and results confirm the theoretical conclusions. An uninterrupted hydrolysis over a given time period leads to a lower degree of saccharification than when hydrolysate is withdrawn several times. Saccharification is also favored if the residue is removed at a late stage, i.e., at the end of the 24 h hydrolysis cycle. Extended recirculation of the enzymes during a 4 x 24-h experimental period gave the following average yields of saccharification on a 24-h basis: 65% (Reference), 73% (Model 2), and 79% (Model 4). It is concluded that enzyme recovery with model 4 is 70% or more, while the Reference and Model 2 attain a lower level of recovery. The design of an improved hydrolysis model is also discussed.     

马尾松松针挥发油提取工艺研究

本文研究水蒸气蒸馏法提取马尾松松针挥发油的工艺。通过单因素试验考察液固比、提取时间、松针长度、浸泡时间4个因素对马尾松松针挥发油得率的影响,运用L9(34)正交试验探索最佳工艺条件。结果表明,浸泡时间对挥发油提取有显著影响(P=0.045),最佳时间为7 h;液固比、提取时间、松针长度无显著影响(P>0.05)。最佳工艺条件为液固比9∶1、提取时间3 h、松针长度5 mm、浸泡时间7 h,通过验证实验验证此工艺稳定可行。     

Improving the fermentation performance of saccharomyces cerevisiae by laccase during ethanol production from steam‐exploded wheat straw at high‐substrate loadings

Operating the saccharification and fermentation processes at high‐substrate loadings is a key factor for making ethanol production from lignocellulosic biomass economically viable. However, increasing the substrate loading presents some disadvantages, including a higher concentration of inhibitors (furan derivatives, weak acids, and phenolic compounds) in the media, which negatively affect the fermentation performance. One strategy to eliminate soluble inhibitors is filtering and washing the pretreated material. In this study, it was observed that even if the material was previously washed, inhibitory compounds were released during the enzymatic hydrolysis step. Laccase enzymatic treatment was evaluated as a method to reduce these inhibitory effects. The laccase efficiency was analyzed in a presaccharification and simultaneous saccharification and fermentation process at high‐substrate loadings. Water‐insoluble solids fraction from steam‐exploded wheat straw was used as substrate and Saccharomyces cerevisiae as fermenting microorganism. Laccase supplementation reduced strongly the phenolic content in the media, without affecting weak acids and furan derivatives. This strategy resulted in an improved yeast performance during simultaneous saccharification and fermentation process, increasing significantly ethanol productivity. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2013