Suitability of Macrolampis firefly and Pyrearinus click beetle luciferases for bacterial light off toxicity biosensor

Bioluminescence is widely used in biosensors. For water toxicity analysis, the naturally bioluminescent bacteria Vibrio fischeri have been used extensively. We investigated the suitability of two new beetle luciferases for Escherichia coli light off biosensors: Macrolampis firefly and Pyrearinus termitilluminans click beetle luciferases. The bioluminescence detection assay using this system is very sensitive, being comparable or superior to V. fischeri. The luciferase of P. termitilluminans produces a strong and sustained bioluminescence that is useful for less sensitive and inexpensive assays that require integration of the emission, whereas Macrolampis luciferase displays a flash-like luminescence that is useful for fast and more sensitive assays. The effect of heavy metals and sanitizing agents was analyzed. Zinc, copper, 1-propanol, and iodide had inhibitory effects on bioluminescence and growth assays; however, in these cases the bioluminescence was not a very reliable indicator of cell growth and metabolic activity because these agents also inhibited the luciferase. On the other hand, mercury and silver strongly affected cell bioluminescence and growth but not the luciferase activity, indicating that bioluminescence was a reliable indicator of cell growth and metabolic activity in this case. Finally, bioluminescent E. coli immobilized in agarose matrix gave a more stable format for environmental assays.     

Thr226 is a key residue for bioluminescence spectra determination in beetle luciferases

The comparison of click beetle and railroadworm luciferases (pH-insensitive) with firefly luciferases (pH-sensitive) showed a set of conserved residues differing between the two groups which could be involved with the bioluminescence spectra pH sensitivity. The substitution C258V in Pyrocoelia miyako (Pml) firefly luciferase and V255C in Ragophthalmus ohbai railroad worm luciferase (Rol) had no effect on the bioluminescence spectra. Substitution of Thr226 in the green-light-emitting luciferases of Rol and Pyrearinus termitilluminans (Pyt) click beetle luciferases resulted in red-shifts (12 to 35 nm), whereas the substitution T226N in the red-light-emitting luciferase of Phrixothrix hirtus (PhRE) railroadworm resulted in a 10 nm blue-shift. In PmL the substitution N230S resulted in a typical red mutant (lambda(max) = 611 nm). The bioluminescence spectrum of all these luciferase mutants did not show altered pH-sensitivity nor considerably changed half-bandwidth in relation to the wild-type luciferases. Altogether present data suggest that Thr226 is an important residue for keeping active-site core in both groups of beetle luciferases. The mechanism for bioluminescence color determination between pH-sensitive and pH-insensitive luciferases could be different.     

Red-emitting luciferases for bioluminescence reporter and imaging applications

North American firefly Photinus pyralis luciferase, which emits yellow-green light (557 nm), has been adapted for a variety of applications, including gene reporter assays, whole-cell biosensor measurements, and in vivo imaging. Luciferase variants with red-shifted bioluminescence and high specific activity can be paired with green-emitting counterparts for use in dual-color reporter assays or can be used alone for in vivo imaging. Beginning with a previously reported red-emitting thermostable mutant and using mutagenesis techniques, we engineered two luciferases with redder emission maxima while maintaining satisfactory specific activities and thermostability. The novel enzymes were expressed in HEK293 cells, where they performed similarly to Promega’s codon-optimized click beetle red luciferase in model reporter assays. When the firefly luciferase variants were codon-optimized and retested using optimized substrate concentrations, they provided 50- to 100-fold greater integrated light intensities than the click beetle enzyme. These results suggest that the novel enzymes should provide superior performance in dual-color reporter and in vivo imaging applications, and they illustrate the importance of codon optimization for assays in mammalian cells.     

Bioluminescence and chemiluminescence literature: 1987 literature,part III

In studying beetle bioluminescence in the early 1960s, Dr McElroy and his colleagues found that the Jamaican click beetle, Pyrophorus plagiophthalamus, was capable of emitting different colours of light. They further found that the luciferin substrate used by this beetle was the same as that in the firefly, demonstrating that the different colours of bioluminescence were due to differences in the structure of the luciferases. We have recently cloned cDNAs from this beetle species which code for at least four different luciferases. The luciferases are distinguishable by their different colours of bioluminescence when expressed in Escherichia coli. The sequence differences between these different luciferases are few, so the amino acids responsible for the different colours of emission must also be few. Through the construction of hybrid luciferases, by rearranging fragments of the original cDNA clones, we have identified some of these amino acid determinants of colour.     

Introduction to beetle luciferases and their applications

All beetle luciferases have evolved from a common ancestor: they all use ATP, O₂, and a common luciferin as substrates. The most studied of these luciferases is that derived from the firefly Photinus pyralis, a beetle in the superfamily of Cantharoidea. The sensitivity with which the activity of this enzyme can be assayed has made it useful in the measurement of minute concentrations of ATP. With the cloning of the cDNA coding this luciferase, it has also found wide application in molecular biology as a reporter gene. We have recently cloned other cDNAs that code for luciferases from the bioluminescent click beetle, Pyrophorus plagiophthalamus, in the superfamily Elateroidea. These newly acquired luciferases are of at least four different types, distinguishable by their ability to emit different colours of bioluminescence ranging from green to orange. Unique properties of these luciferases, especially their emission of multiple colours, may make them additionally useful in applications.     

An alternative mechanism of bioluminescence color determination in firefly luciferase

Beetle luciferases (including those of the firefly) use the same luciferin substrate to naturally display light ranging in color from green (lambda(max) approximately 530 nm) to red (lambda(max) approximately 635 nm). In a recent communication, we reported (Branchini, B. R., Murtiashaw, M. H., Magyar, R. A., Portier, N. C., Ruggiero, M. C., and Stroh, J. G. (2002) J. Am. Chem. Soc. 124, 2112-2113) that the synthetic adenylate of firefly luciferin analogue D-5,5-dimethylluciferin was transformed into the emitter 5,5-dimethyloxyluciferin in bioluminescence reactions catalyzed by luciferases from Photinus pyralis and the click beetle Pyrophorus plagiophthalamus. 5,5-Dimethyloxyluciferin is constrained to exist in the keto form and fluoresces mainly in the red. However, bioluminescence spectra revealed that green light emission was produced by the firefly enzyme, and red light was observed with the click beetle protein. These results, augmented with steady-state kinetic studies, were taken as experimental support for mechanisms of firefly bioluminescence color that require only a single keto form of oxyluciferin. We report here the results of mutagenesis studies designed to determine the basis of the observed differences in bioluminescence color with the analogue adenylate. Mutants of P. pyralis luciferase putative active site residues Gly246 and Phe250, as well as corresponding click beetle residues Ala243 and Ser247 were constructed and characterized using bioluminescence emission spectroscopy and steady state kinetics with adenylate substrates. Based on an analysis of these and recently reported (Branchini, B. R., Southworth, T. L., Murtiashaw, M. H., Boije, H., and Fleet, S. E. (2003) Biochemistry 42, 10429-10436) data, we have developed an alternative mechanism of bioluminescence color. The basis of the mechanism is that luciferase modulates emission color by controlling the resonance-based charge delocalization of the anionic keto form of the oxyluciferin excited state.     

The structural origin and biological function of pH-sensitivity in firefly luciferases.

Firefly luciferases are called pH-sensitive because their bioluminescence spectra display a typical red-shift at acidic pH, higher temperatures, and in the presence of heavy metal cations, whereas other beetle luciferases (click beetles and railroadworms) do not, and for this reason they are called pH-insensitive. Despite many studies on firefly luciferases, the origin of pH-sensitivity is far from being understood. This subject is revised in view of recent results. Some substitutions of amino-acid residues influencing pH-sensitivity in firefly luciferases have been identified. Sequence comparison, site-directed mutagenesis and modeling studies have shown a set of residues differing between pH-sensitive and pH-insensitive luciferases which affect bioluminescence colors. Some substitutions dramatically affecting bioluminescence colors in both groups of luciferases are clustered in the loop between residues 223-235 (Photinus pyralis sequence). A network of hydrogen bonds and salt bridges involving the residues N229-S284-E311-R337 was found to be important for affecting bioluminescence colors. It is suggested that these structural elements may affect the benzothiazolyl side of the luciferin-binding site affecting bioluminescence colors. Experimental evidence suggest that the residual red light emission in pH-sensitive luciferases could be a vestige that may have biological importance in some firefly species. Furthermore, the potential utility of pH-sensitivity for intracellular biosensing applications is considered.     

Mutant Luciferase Enzymes from Fireflies with Increased Resistance to Benzalkonium Chloride

Benzalkonium chloride (BAC), used to extract intracellular ATP, interferes with subsequent firefly luciferase-luciferin assays. There was a significant difference among wild-type luciferases with respect to BAC resistance. Luciola lateralis luciferase (LlL) was the most tolerant, followed by Luciola cruciata luciferase (LcL) and Photinus pyralis luciferase. Random mutagenesis of thermostable mutants of LcL showed that the Glu490Lys mutation contributes to improved resistance to BAC. The corresponding Glu490Lys mutation was introduced into thermostable mutants of LlL by site-directed mutagenesis. Kinetic analysis demonstrated that the resultant LlL-217L490K mutant, having both an Ala217Leu and a Glu490Lys mutation, showed the highest resistance to BAC, with an initial remaining bioluminescence intensity of 87.4% and a decay rate per minute of 29.6% in the presence of 0.1% BAC. The Glu490Lys mutation was responsible for increased resistance to inactivation but not inhibition by BAC. The LlL-217L490K had identical thermostability and pH stability to the parental thermostable mutant. From these results, it was concluded that the LlL-217L490K enzyme is advantageous for hygiene monitoring and biomass assays based on the ATP-bioluminescence methodology. This is the first report demonstrating improved resistance to BAC of the firefly luciferase enzyme.     

Crystal structure of native and a mutant of Lampyris turkestanicus luciferase implicate in bioluminescence color shift

Firefly bioluminescence reaction in the presence of Mg^2 +, ATP and molecular oxygen is carried out by luciferase. The luciferase structure alterations or modifications of assay conditions determine the bioluminescence color of firefly luciferase. Among different beetle luciferases, Phrixothrix hirtus railroad worm emits either yellow or red bioluminescence color. Sequence alignment analysis shows that the red-emitter luciferase from Phrixothrix hirtus has an additional arginine residue at 353 that is absent in other firefly luciferases. It was reported that insertion of Arg in an important flexible loop350–359 showed changes in bioluminescence color from green to red and the optimum temperature activity was also increased. To explain the color tuning mechanism of firefly luciferase, the structure of native and a mutant (E354R/356R/H431Y) of Lampyris turkestanicus luciferase is determined at 2.7 Å and 2.2 Å resolutions, respectively. The comparison of structure of both types of Lampyris turkestanicus luciferases reveals that the conformation of this flexible loop is significantly changed by addition of two Arg in this region. Moreover, its surface accessibility is affected considerably and some ionic bonds are made by addition of two positive charge residues. Furthermore, we noticed that the hydrogen bonding pattern of His431 with the flexible loop is changed by replacing this residue with Tyr at this position. Juxtaposition of a flexible loop (residues 351–359) in firefly luciferase and corresponding ionic and hydrogen bonds are essential for color emission.     

Thermostable red and green light-producing firefly luciferase mutants for bioluminescent reporter applications

Light emission from the North American firefly Photinus pyralis, which emits yellow-green (557-nm) light, is widely believed to be the most efficient bioluminescence system known, making this luciferase an excellent tool for monitoring gene expression. We present studies on the production of a set of thermostable red- and green-emitting luciferase mutants with bioluminescent properties suitable for dual-color reporter assays, biosensor measurements with internal controls, and imaging techniques. Starting with the luciferase variant Ser284Thr, we introduced the mutations Thr214Ala, Ala215Leu, Ile232Ala, Phe295Leu, and Glu354Lys to produce a new red-emitting enzyme with a bioluminescence maximum of 610 nm, narrow emission bandwidth, favorable kinetic properties, and excellent thermostability at 37 degrees C. By adding the same five changes to luciferase mutant Val241Ile/Gly246Ala/Phe250Ser, we produced a protein with an emission maximum of 546 nm, providing a set of thermostable enzymes whose bioluminescence maxima were separated by 64 nm. Model studies established that the luciferases could be detected at the attomole level and six orders of magnitude higher. In microplate luminometer format, mixtures containing 1.0 fmol total luciferase were quantified from measurements of simultaneously emitted red and green light. The results presented here provide evidence that it is feasible to monitor two distinct activities at 37 degrees C with these novel thermostable proteins.     

Expression of luciferase genes from different origins in Bacillus subtilis

Summary A group of vectors for luciferase expression in Bacillus subtilis was constructed. So far, only bacterial luciferases have been expressed in Bacillus, but in this study we wanted also to express genes encoding eukaryotic luciferases to perform direct comparisons of the light levels produced by the two different systems in B. subtilis. The vectors constructed can replicate both in Escherichia coli and B. subtilis, and the luciferase expression is strictly regulated due to the dual plasmid system used. Nearly a 100-fold increase in light production compared to previous results was achieved when genes encoding bacterial luciferase were inserted into the constructs and transformed into B. subtilis. An additional tenfold increase in light production was obtained when luciferase genes from the North American firefly (Photinus pyralis) or a click beetle (Pyrophorus plagiophtalamus) were introduced in a similar fashion into B. subtilis. Measurement of the light emission was performed without disruption of bacterial cells in a real-time manner, which is a common feature when working with all of these constructions. Structures of the shuttle vector constructs and results from light emission measurements are presented.     

The Effect of Clp Proteins on DnaK-Dependent Refolding of Bacterial Luciferases

A study was made of the refolding of bacterial luciferases of Vibrio fischeri, V. harveyi, Photobacterium phosphoreum, and Photorhabdus luminescens. By reaction rate, luciferases were divided into two groups. The reaction rate constants of fast luciferases of V. fischeri and Ph. phosphoreum were about tenfold higher than those of slow luciferases of Ph. luminescens and V. harveyi. The order of increasing luciferase thermostability was Ph. phosphoreum, V. fischeri, V. harveyi, and Ph. luminescens. The refolding of thermoinactivated luciferases completely depended on the active DnaK–DnaJ–GrpE chaperone system. Thermolabile fast luciferases of V. fischeri and Ph. phosphoreum showed highly efficient rapid refolding. Slower and less efficient refolding was characteristic of thermostable slow luciferases of V. harveyi and Ph. luminescens. Chaperones of the Clp family were tested for effect on the efficiency of DnaK-dependent refolding of bacterial luciferases in Escherichia coli cells. The rate and extent of refolding were considerably lower in the clpB mutant than in wild-type cells. In E. coli cells with mutant clpA, clpP, of clpX showed a substantially lower luciferase refolding after heat shock.     

Cloning, sequence analysis, and expression of active Phrixothrix railroad-worms luciferases: relationship between bioluminescence spectra and primary structures.

Phrixothrix railroad-worms emit yellow-green light through 11 pairs of lateral lanterns along the body and red light through two cephalic lanterns. The cDNAs for the lateral lanterns luciferase of Phrixothrix vivianii, which emit green light (lambda max= 542 nm), and for the head lanterns of P. hirtus, which emit the most red-shifted bioluminescence (lambda max= 628 nm) among luminescent beetles, were cloned. Positive clones which emitted green (PvGR: lambda max= 549 nm) and red (PhRE: lambda max= 622 nm) bioluminescence were isolated. The lucifereases coded by PvGR (545 amino acid residues) and PhRE (546 amino acid residues) cDNAs share 71% identity. PvGR and PhRE luciferases showed 50-55% and 46-49% identity with firefly luciferases, respectively, and 47-49% with click-beetle luciferases. PhRE luciferase has some unique residues which replace invariant residues in other beetle luciferases. The additional residue Arg 352 in PhRE, which is deleted in PvGR polypeptide, seems to be another important structural feature associated with red light production. As in the case of other railroad-worms and click-beetle luciferases studied, Phrixothrix luciferases do not undergo the typical red shift suffered by firefly luciferases upon decreasing pH, a property which might be related to the many amino acid residues shared in common between railroad-worm and click-beetle luciferase.     

Vision in click beetles (Coleoptera: Elateridae): pigments and spectral correspondence between visual sensitivity and species bioluminescence emission

Among lampyrids, intraspecific sexual communication is facilitated by spectral correspondence between visual sensitivity and bioluminescence emission from the single lantern in the tail. Could a similar strategy be utilized by the elaterids (click beetles), which have one ventral abdominal and two dorsal prothoracic lanterns? Spectral sensitivity [S(λ)] and bioluminescence were investigated in four Brazilian click beetle species Fulgeochlizus bruchii, Pyrearinus termitilluminans, Pyrophorus punctatissimus and P. divergens, representing three genera. In addition, in situ microspectrophotometric absorption spectra were obtained for visual and screening pigments in P. punctatissimus and P. divergens species. In all species, the electroretinographic S(λ) functions showed broad peaks in the green with a shoulder in the near-ultraviolet, suggesting the presence of short- and long-wavelength receptors in the compound eyes. The long-wavelength receptor in Pyrophorus species is mediated by a P540 rhodopsin in conjunction with a species-specific screening pigment. A correspondence was found between green to yellow bioluminescence emissions and its broad S(λ) maximum in each of the four species. It is hypothesized that in elaterids, bioluminescence of the abdominal lantern is an optical signal for intraspecifc sexual communication, while the signals from the prothoracic lanterns serve to warn predators and may also provide illumination in flight.     

A new blue-shifted luciferase from the Brazilian Amydetes fanestratus (Coleoptera: Lampyridae) firefly: molecular evolution and structural/functional properties

Firefly luciferases usually produce bioluminescence in the yellow-green region, with colors in the green and yellow-orange extremes of the spectrum being less common. Several firefly luciferases have already been cloned and sequenced, and site-directed mutagenesis studies have already identified important regions and residues for bioluminescence colors. However the structural determinants and mechanisms of bioluminescence colors turned out to be elusive, mainly when comparing luciferases with a high degree of divergence. Thus comparison of more similar luciferases producing colors in the two extremes of the spectrum could be revealing. The South-American fauna of fireflies remains largely unstudied, with some unique taxa that are not found anywhere else in the world and that produce a wide range of bioluminescence colors. Among them, fireflies of the genus Amydetes are especially interesting because its taxonomical status as an independent subfamily or as a tribe is not yet solved, and because they usually produce a continuous bright blue-shifted bioluminescence. In this work we cloned the cDNA for the luciferase of the Atlantic rain forest Amydetes fanestratus firefly, which is found near Sorocaba municipality (S?o Paulo, Brazil). Despite showing a higher degree of identity with the South-American Cratomorphus, the European Lampyris and the Asiatic Pyrocoelia, phylogenetical analysis of the luciferase sequence support the inclusion of Amydetes as an independent subfamily. Amydetes luciferase displays one of the most blue-shifted emission spectra (λ(max) = 538 nm) among beetle luciferases, with lower pH-sensitivity and higher affinity for ATP when compared to other luciferases, making this luciferase attractive for sensitive ATP and reporter assays.     

The influence of insertion of a critical residue (Arg356) in structure and bioluminescence spectra of firefly luciferase

The firefly bioluminescence reaction, which uses luciferin, Mg-ATP, and molecular oxygen to yield an electronically excited oxyluciferin, is carried out by luciferase and visible light is emitted. The bioluminescence color of firefly luciferases is determined by the luciferase structure and assay conditions. Among different beetle luciferases, those from Phrixothrix railroad worm emit either yellow or red bioluminescence colors. Sequence alignment analysis shows that the red-emitter luciferase from Phrixothrix hirtus has an additional Arg residue at 353, which is absent in firefly luciferases. We report here the construction and purification of a mutant at residue Arg(356), which is not conserved in beetle luciferases. By insertion of an additional residue (Arg(356)) using site-specific insertion mutagenesis in a green-emitter luciferase (Lampyris turkestanicus) the color of emitted light was changed to red and the optimum temperature of activity was also increased. Insertion of this Arg in an important flexible loop showed changes of the bioluminescence color and the luciferase reaction took place with relatively retention of its basic kinetic properties such as Km and relative activity. Comparison of native and mutant luciferases using homology modeling reveals a significant conformational change of the flexible loop in the red mutant. Movement of flexible loop brought about a new ionic interaction concomitant with a change in polarity of the emitter site, thereby leading to red emission. It is worthwhile to note that the increased optimum temperature and emission of red light might make mutant luciferase a suitable reporter for the study of gene expression and bioluminescence imaging.     

Orthologous gene of beetle luciferase in non-luminous click beetle, Agrypnus binodulus (Elateridae), encodes a fatty acyl-CoA synthetase

A homologous gene of beetle luciferase, AbLL (Agrypnus binodulusluciferase-like gene) was isolated from a Japanese non-luminous click beetle, A. binodulus, and its gene product was characterized. The identity of amino acid sequence deduced from AbLL with the click beetle luciferase from the Jamaican luminous click beetle, Pyrophorus plagiophthalmus, is 55%, which is higher than that between click beetle luciferase and firefly luciferase (approximately 48%). Phylogenetic analysis indicated that AbLL places in a clade of beetle luciferases, suggesting that AbLL is an orthologous gene of beetle luciferase. The gene product of AbLL (AbLL) has medium- and long-chain fatty acyl-CoA synthetase activity, but not luciferase activity. The fatty acyl-CoA synthetic activity was slightly inhibited in the presence of beetle luciferin, suggesting that AbLL has poor affinity for beetle luciferin. By comparing the amino acid residues of the catalytic domains in beetle luciferases with AbLL, the key substitutions for the luminescence activity in beetle luciferase will be proposed.     

Mutant luciferase enzymes from fireflies with increased resistance to benzalkonium chloride

Benzalkonium chloride (BAC), used to extract intracellular ATP, interferes with subsequent firefly luciferase-luciferin assays. There was a significant difference among wild-type luciferases with respect to BAC resistance. Luciola lateralis luciferase (LlL) was the most tolerant, followed by Luciola cruciata luciferase (LcL) and Photinus pyralis luciferase. Random mutagenesis of thermostable mutants of LcL showed that the Glu490Lys mutation contributes to improved resistance to BAC. The corresponding Glu490Lys mutation was introduced into thermostable mutants of LlL by site-directed mutagenesis. Kinetic analysis demonstrated that the resultant LlL-217L490K mutant, having both an Ala217Leu and a Glu490Lys mutation, showed the highest resistance to BAC, with an initial remaining bioluminescence intensity of 87.4% and a decay rate per minute of 29.6% in the presence of 0.1% BAC. The Glu490Lys mutation was responsible for increased resistance to inactivation but not inhibition by BAC. The LlL-217L490K had identical thermostability and pH stability to the parental thermostable mutant. From these results, it was concluded that the LlL-217L490K enzyme is advantageous for hygiene monitoring and biomass assays based on the ATP-bioluminescence methodology. This is the first report demonstrating improved resistance to BAC of the firefly luciferase enzyme.     

Site-directed mutagenesis of firefly luciferase active site amino acids: a proposed model for bioluminescence color.

Under physiological conditions firefly luciferase catalyzes the highly efficient emission of yellow-green light from the substrates luciferin, Mg-ATP, and oxygen. In nature, bioluminescence emission by beetle luciferases is observed in colors ranging from green (approximately 530 nm) to red (approximately 635 nm), yet all known luciferases use the same luciferin substrate. In an earlier report [Branchini, B. R., Magyar, R. M., Murtiashaw, M. H., Anderson, S. M., and Zimmer, M. (1998) Biochemistry 37, 15311-15319], we described the effects of mutations at His245 on luciferase activity. In the context of molecular modeling results, we proposed that His245 is located at the luciferase active site. We noted too that the H245 mutants displayed red-shifted bioluminescent emission spectra. We report here the construction and purification of additional His245 mutants, as well as mutants at residues Lys529 and Thr343, all of which are stringently conserved in the beetle luciferase sequences. Analysis of specific activity and steady-state kinetic constants suggested that these residues are involved in luciferase catalysis and the productive binding of substrates. Bioluminescence emission spectroscopy studies indicated that point mutations at His245 and Thr343 produced luciferases that emitted light over the color range from green to red. The results of mutational and biochemical studies with luciferase reported here have enabled us to propose speculative mechanisms for color determination in firefly bioluminescence. An essential role for Thr343, the participation of His245 and Arg218, and the involvement of bound AMP are indicated.     

Improved practical usefulness of firefly luciferase by gene chimerization and random mutagenesis

To improve the practical usefulness of the firefly luciferase, we performed gene chimerization between Photinus pyralis luciferase and a thermostable variant of Luciola cruciata luciferase. One chimeric luciferase showed low K(m) value for substrate ATP and similar stability to thermostable L. cruciata luciferase. We then introduced random mutations in the corresponding gene and screened for increased catalytic efficiency. Amino acid replacement of Thr219, Val239 and Val290 affected the kinetic parameters. Therefore, we combined these three mutations. One mutant, ABcT219I,V239I, showed high catalytic efficiency comparable to P. pyralis luciferase and high stability similar to thermostable L. cruciata luciferase. The pH-dependence of the bioluminescence emission spectra was also examined. In contrast to wild-type firefly luciferases characterized to date, the mutant did not show the pH-dependent red spectrum shift.