Purealin, a novel activator of skeletal muscle actomyosin ATPase and myosin EDTA-ATPase that enhanced the superprecipitation of actomyosin

1. Purealin, a novel bioactive principle of a sea sponge Psammaplysilla purea, activated the superprecipitation of myosin B (natural actomyosin) from rabbit skeletal muscle. The maximum change in the turbidity increased with increasing purealin concentrations and was three times the control value in the presence of 50 microM purealin. 2. The ATPase activity of myosin B was also elevated to 160% of the control value by 10 microM purealin. On the other hand, purealin inhibited the myosin ATPase in the presence of 10 mM CaCl2 and 0.5 M KCl (Ca2+-ATPase), and the concentration for the half inhibition was 4 microM. 3. On the other hand, purealin activated the myosin ATPase in the presence of 5 mM EDTA and 0.5 M KCl (EDTA-ATPase). The maximum activation by 10 microM purealin was 160% of the control value. 4. Furthermore, similar results concerning the modification of ATPase activities by purealin were obtained in myosin subfragment-1 instead of myosin. 5. These results suggest that purealin activates the superprecipitation of myosin B by affecting the myosin heads directly. It is also an interesting observation that there is a correlation between the activities of the myosin EDTA-ATPase and actomyosin ATPase of myosin B.     

Vanadate-mediated photocleavage of rabbit skeletal myosin

The heavy chain of myosin from rabbit skeletal muscle can be cleaved at three sites by irradiation with near-ultraviolet light in the presence of 0.1-1.0 mM vanadate. The sigmoidal dependence upon vanadate concentration, with half-maximal rate occurring at about 0.5 mM vanadate and a sigmoidicity of 2.7, is consistent with the chromophore responsible for cleavage being oligomeric vanadate. Cleavage occurs at two sites located within the head region of the molecule, 23 kDa and 75 kDa from the NH2-terminus; these sites are cleaved equally well in heavy meromyosin and subfragment 1. In the presence of 1 mM vanadate, the half-times for cleavage of the 23-kDa and 75-kDa sites are about 15 and 10 min, respectively. The rate of cleavage at both these sites is retarded 2-3-fold by the presence of greater than 10 microM MgATP. The third photocleavage site is located about 5-10 kDa from the COOH terminus of the intact heavy chain, and cleaves equally well in the isolated rod and in light meromyosin. Cleavage at this site occurs with a half-time of 138 min, and its rate is unaffected by the presence of MgATP. The vanadate-mediated cleavage of the heavy chains is accompanied by characteristic changes in the myosin ATPase properties, with the Ca2+, Mg2+ and actin-activated Mg2+ ATPases becoming elevated, whereas the K+/EDTA ATPase becomes inactivated. The sites of photocleavage in the myosin heavy chain might be associated with sites of phosphate binding.     

Diphosphorylation of platelet myosin by myosin light chain kinase.

Recently, one of the authors (K.I.) and other investigators reported that myosin light chain (MLC) of smooth muscle (gizzard, arterial and tracheal) was diphosphorylated by myosin light chain kinase (MLCK) and that diphosphorylated myosin showed a marked increase in the actin-activated myosin ATPase activity in vitro and ex vivo. In this study, we prepared myosin, actin, tropomyosin (human platelet), MLCK (chicken gizzard) and calmodulin (bovine brain) and demonstrated diphosphorylation of MLC of platelet by MLCK in vitro. Our results are as follows. (1) Platelet MLC was diphosphorylated by a relatively high concentration (greater than 20 micrograms/ml) of MLCK in vitro. As a result of diphosphorylation, the actin-activated myosin ATPase activity was increased 3 to 4-fold as compared to the monophosphorylation. (2) Both di- and monophosphorylation reactions showed similar Ca2+, KCl, MgCl2-dependence. Maximal reaction was seen at [Ca2+] greater than 10(-6) M, 60 mM KCl and 2 mM MgCl2. This condition was physiological in activated platelets. (3) Di- and monophosphorylated myosin showed similar Ca2+, KCl-dependence of ATPase activity but distinct MgCl2-dependence. Diphosphorylated myosin showed maximal ATPase activity at 2 mM MgCl2 and monophosphorylated myosin showed a maximum at 10 mM MgCl2. (4) The addition of tropomyosin stimulated actin-activated ATPase activity in both di- and monophosphorylated myosin to the same degree. (5) ML-9, a relatively specific inhibitor of MLCK, inhibited the aggregation of human platelets induced by thrombin ex vivo in a dose-dependent manner. Moreover, this drug also partially inhibited both di- and monophosphorylation reactions and actin-activated ATPase activity. On the other hand, H-7, a synthetic inhibitor of protein kinase C, had little effect on the aggregation of human platelets induced by thrombin ex vivo. From these results, we conclude that diphosphorylation of platelet myosin by MLCK may play an important role in activated platelets in vivo.     

Purification and characterization of myosin from the clonal rat glial cell strain C-6.

A myosin was isolated from the clonal rat glial cell strain C-6 and compared with rat skeletal muscle myosin. After cell extracts were subjected to gel filtration chromatography in the presence of KI and magnesium pyrophosphate the C-6 myosin was rapidly purified by a procedure similar to that used for skeletal muscle myosin. The C-6 myosin resembles muscle myosin both physically and enzymatically. It contains heavy chains of 200,000 daltons and two classes of light chains of 17,000 and 19,000 daltons in approximately equal molar ratios. This myosin forms bipolar thick filaments in 0.1 M KCl and binds reversibly to skeletal muscle F-actin, the binding being inhibited by MgATP. Skeletal muscle F-actin stimulates the C-6 myosin adenosine triphosphatase 2- to 3-fold in the presence of KCl and Mg2+. The action activation of muscle myosin ATPase at low ionic strength is 10-fold greater than that of C-6 myosin. Ca2+ and EDTA stimulated the ATPase activities of both enzymes. When assayed in the presence of 0.6 M KCl and 1 mM EDTA the skeletal muscle myocin ATPase demonstrates substrate saturation while the C-6 myosin enzyme activity is stimulated by ATP concentrations above 2.5 mM.     

Modulation of monomer-polymer equilibrium of phosphorylated smooth muscle myosin: effects on actin activation

Actin activation of the adenosinetriphosphatase (ATPase) of phosphorylated gizzard myosin at low (2 mM) free Mg2+ concentration and 50 mM total ionic strength continues to increase on raising the free Ca2+ concentration near pCa 3. Similar levels of activity can be obtained by increasing the free Mg2+ concentration to a higher (in excess of 4 mM free) concentration. In the presence of micromolar concentrations of free Ca2+ and low free Mg2+ concentration, the actin-activated adenosine 5'-triphosphate (ATP) hydrolysis exhibits an initial rapid rate which progressively slows to a final, lower but more linear rate. In the presence of high divalent cation concentrations, the fast rate of ATP hydrolysis is maintained during the entire ATPase assay. The ionic conditions which favor the slow rate of ATP hydrolysis are correlated with increased proportions of folded myosin monomers while higher rates of ATP hydrolysis are correlated with increased levels of aggregated myosin. Elevating the thin filament proteins to saturating concentrations does not abolish the change in ATPase rate or the final distribution of myosin aggregates and monomers; however, the stability of the myosin aggregates is enhanced by the presence of thin filament proteins in low divalent cation conditions. The nonlinear profile of the actin-activated ATP hydrolysis in low divalent cation concentrations is eliminated by utilizing nonfilamentous, phosphorylated heavy meromyosin. The data presented indicate that Ca2+ and Mg2+ alter monomer-polymer equilibrium of stably phosphorylated myosin. The alteration of monomer-polymer equilibrium by Ca2+ at low Mg2+ concentration modulates ATPase rates.     

Effects of magnesium chloride on smooth muscle actomyosin adenosine-5'-triphosphatase activity, myosin conformation, and tension development in glycerinated smooth muscle fibers

The contractile system of smooth muscle exhibits distinctive responses to varying Mg2+ concentrations in that maximum adenosine-5'-triphosphatase (ATPase) activity of actomyosin requires relatively high concentrations of Mg2+ and also that tension in skinned smooth muscle fibers can be induced in the absence of Ca2+ by high Mg2+ concentrations. We have examined the effects of MgCl2 on actomyosin ATPase activity and on tension development in skinned gizzard fibers and suggest that the MgCl2-induced changes may be correlated to shifts in myosin conformation. At low concentrations of free Mg2+ (less than or equal to 1 mM) the actin-activated ATPase activity of phosphorylated turkey gizzard myosin is reduced and is increased as the Mg2+ concentration is raised. The increase in Mg2+ (over a range of 1-10 mM added MgCl2) induces the conversion of 10S phosphorylated myosin to the 6S form, and it was found that the proportion of myosin as 10S is inversely related to the level of actin-activated ATPase activity. Activation of the actin-activated ATPase activity also occurs with dephosphorylated myosin but at higher MgCl2 concentrations, between 10 and 40 mM added MgCl2. Viscosity and fluorescence measurements indicate that increasing Mg2+ levels over this concentration range favor the formation of the 6S conformation of dephosphorylated myosin, and it is proposed that the 10S to 6S transition is a prerequisite for the observed activation of ATPase activity. With glycerinated chicken gizzard fibers high MgCl2 concentrations (6-20 mM) promote tension in the absence of Ca2+.(ABSTRACT TRUNCATED AT 250 WORDS)     

Purealin, a novel stabilizer of smooth muscle myosin filaments that modulates ATPase activity of dephosphorylated myosin

Effects of purealin isolated from a sea sponge, Psammaplysilla purea, on the enzymatic and physiochemical properties of chicken gizzard myosin were studied. At 0.15 M KCl, 40 microM purealin increased the Ca2+- and Mg2+-ATPase activity of dephosphorylated gizzard myosin to 2.5- and 3-fold, respectively, but decreased the K+-EDTA-ATPase activity of the myosin to 0.25-fold. In contrast, purealin had little effect on the ATPase activities of phosphorylated gizzard myosin. The ATP-induced decrease in light scattering of dephosphorylated gizzard myosin at 0.15 M KCl was lessened by 40 microM purealin. Electron microscopic observations indicated that thick filaments of dephosphorylated myosin were disassembled immediately by addition of 1 mM ATP at 0.15 M KCl, although they were preserved by purealin for a long time even after addition of ATP. Upon ultracentrifugation, dephosphorylated myosin sedimented as two components, the 10 S species and myosin filaments, in the solution containing 0.18 M KCl and 1 mM Mg X ATP in the presence of 60 microM purealin. These results suggest that purealin modulates the ATPase activities of dephosphorylated gizzard myosin by enhancing the stability of myosin filaments against the disassembling action of ATP.     

Reaction intermediates of myosin ATPase from scallop adductor muscles: nonidentical two-headed structure of striated adductor muscle myosin

To determine whether or not the two heads of myosin from striated adductor muscles of scallop are nonidentical and the main intermediate of the ATPase reaction, MADPP, is produced only on one of the two heads, the Pi-burst size, the amount of total bound nucleotides and the amount of bound ADP during the ATPase reaction were measured in this study. The Pi-burst size was 1 mol per mol in the presence of 0.1-5 mM Mg2+ ions. The amount of total nucleotides bound to myosin was 2 mol per mol. Both the amounts of bound ADP and ATP at sufficiently high ATP concentrations were 1 mol per mol of striated adductor myosin, and the affinity for ADP binding was higher than that for ATP binding. These findings indicate that MADPP or MATP is produced on each of the two heads of striated adductor myosin on its interaction with ATP. The fluorescence intensity at 340 nm of striated adductor myosin was enhanced by about 7% upon addition of ATP. The time for the half maximum fluorescence enhancement, tau 1/2, at 5 microM ATP was 0.25 s, which was almost equal to the tau 1/2 values for the Pi-burst and for the dissociation of actomyosin reconstituted from striated adductor myosin and skeletal muscle F-actin. The dependences on ATP concentration of the extent of the fluorescence enhancement and the dissociation of actomyosin could be explained by assuming that these changes are associated with the formation of MADPP on one of the two heads of myosin. The Pi-burst size and the amount of bound ADP of smooth adductor myosin were slightly but significantly larger than 1 mol per mol. Both ATPase reactions of striated and smooth adductor myofibrils showed the substrate inhibition. The extent of substrate inhibition of ATPase of smooth adductor myofibrils was less than that of striated adductor myofibrils. All the present findings support the view that the nonidentical two-headed structure is required for substrate inhibition of the actomyosin ATPase reaction.     

A comparative study of the rat heart sarcolemmal Ca2+-dependent ATPase and myosin ATPase

In order to gain some information regarding Ca²⁺-dependent ATPase, the enzyme was purified from cardiac sarcolemma and its properties were compared with Ca²⁺-ATPase activity of myosin purified from rat heart. Both Ca²⁺-dependent ATPase and myosin ATPase were stimulated by Ca²⁺ but the maximal activation of Ca²⁺-dependent ATPase required 4 mM Ca²⁺ whereas that of myosin ATPase required 10 mM Ca²⁺. These ATPases were also activated by other divalent cations in the order of Ca²⁺ > Mn²⁺ > Sr²⁺ > Br²⁺ > Mg²⁺; however, there was a marked difference in the pattern of their activation by these cations. Unlike the myosin ATPase, the ATP hydrolysis by Ca²⁺-dependent ATPase was not activated by actin. The pH optima of Ca²⁺-dependent ATPase and myosin ATPase were 9.5 and 6.5 respectively. Na⁺ markedly inhibited Ca²⁺-dependent ATPase but had no effect on the myosin ATPase activity. N-ethylmaleimide inhibited Ca²⁺-dependent ATPase more than myosin ATPase whereas the inhibitory effect of vanadate was more on myosin ATPase than Ca²⁺-dependent ATPase. Both Ca²⁺-dependent ATPase and myosin ATPase were stimulated by K-EDTA and NH₄-EDTA. When myofibrils were treated with trypsin and passed through columns similar to those used for purifying Ca²⁺-ATPase from sarcolemma, an enzyme with ATPase activity was obtained. This myofibrillar ATPase was maximally activated at 3–4 mM Ca²⁺ and 3 to 4 mM ATP like sarcolemmal Ca²⁺-dependent ATPase. K⁺ stimulated both ATPase activities in the absence of Ca²⁺ and inhibited in the presence of Ca²⁺. Both enzymes were inhibited by Na⁺, Mg²⁺, La³⁺, and azide similarly. However, Ca²⁺ ATPase from myofibrils showed three peptide bands in SDS polyacrylamide gel electrophoresis whereas Ca²⁺ ATPase from sarcolemma contained only two bands. Sarcolemmal Ca²⁺-ATPase had two affinity sites for ATP (0.012 mM and 0.23 mM) while myofibrillar Ca²⁺-ATPase had only one affinity site (0.34 mM). Myofibrillar Ca²⁺-ATPase was more sensitive to maleic anhydride and iodoacetamide than sarcolemmal Ca²⁺-ATPase. These observations suggest that Ca²⁺-dependent ATPase may be a myosin like protein in the heart sarcolemma and is unlikely to be a tryptic fragment of myosin present in the myofibrils.     

Modification of thiols of gizzard myosin alters ATPase activity, stability of myosin filaments, and the 6-10 S conformational transition

The pattern of incorporation of [14C]N-ethylmaleimide (MalNEt) into gizzard myosin indicates the presence of two classes of thiols: rapidly and slowly modified. The first class contains two thiol residues, SH-A and SH-B, located in the myosin rod and the 17-kDa light chain, respectively, while the second contains at least two thiols located in the myosin heavy chain. Changes in ATPase activities upon modification occur rapidly or slowly, paralleling reaction of either the first or second class of thiols. Rapid changes include increases in the Ca2+- and Mg2+-activated activities of myosin alone, measured at ionic strengths below 0.3 M, and an increase and a decrease in the actin-activated activity of dephosphorylated and phosphorylated myosin, respectively. Modification of SH-A and SH-B with MalNEt is accompanied by stabilization of myosin filaments, seen as an increase in light-scattering intensity, and by destabilization of the folded, 10 S conformation of the myosin monomer. In the presence of 0.175 M NaCl and 1 mM MgATP, unmodified and MalNEt-modified myosin sediment in the ultracentrifuge as single components at 10.0 S and 6.0 S, respectively. The MalNEt-induced increase in the Ca2+- or Mg2+-activated ATPase activity, measured in the absence of actin, can be attributed either to stabilization of filaments or to destabilization of the 10 S conformation, depending on the ionic strength of the assay. Modification of the second class of thiols is accompanied by a decrease in K+-EDTA-activated activity and an increase in Ca2+-activated activity measured above 0.3 M NaCl, where myosin neither forms filaments nor assumes the 10 S conformation. These slow changes are characteristic of blocking the SH-1 thiols of skeletal-muscle myosin, but in gizzard myosin are attributable to modification of a less reactive thiol, SH-C.     

ATPase activities and actin-binding properties of subfragments of Acanthamoeba myosin IA

Previous studies had led to the conclusion that the globular, single-headed myosins IA and IB from Acanthamoeba castellanii contain two actin-binding sites: one associated with the catalytic site and whose binding to F-actin activates the Mg2+-ATPase activity and a second site whose binding results in the cross-linking of actin filaments and makes the actin-activated ATPase activity positively cooperative with respect to myosin I concentration. We have now prepared a 100,000-Da NH2-terminal peptide and a 30,000-Da COOH-terminal peptide by alpha-chymotryptic digestion of the myosin IA heavy chain. The intact 17,000-Da light chain remained associated with the 100,000-Da fragment, which also contained the serine residue that must be phosphorylated for expression of actin-activated ATPase activity by native myosin IA. The 30,000-Da peptide, which contained 34% glycine and 21% proline, bound to F-actin with a KD less than 0.5 microM in the presence or absence of ATP but had no ATPase activity. The 100,000-Da peptide bound to F-actin with KD = 0.4-0.8 microM in the presence of 2 mM MgATP and KD less than 0.01 microM in the absence of MgATP. In contrast to native myosin IA, neither peptide cross-linked actin filaments. The phosphorylated 100,000-Da peptide had actin-activated ATPase activity with the same Vmax as that of native phosphorylated myosin IA but this activity displayed simple, noncooperative hyperbolic dependence on the actin concentration in contrast to the complex cooperative kinetics observed with native myosin IA. These results provide direct experimental evidence for the presence of two actin-binding sites on myosin IA, as was suggested by enzyme kinetic and filament cross-linking data, and also for the previously proposed mechanism by which monomeric myosins I could support contractile activities.     

Diffusion-limited kinetics of immobilized myosin ATPase

To test the possibility that ATP diffusion limits the kinetics of myosin ATPase (EC. 3.6.1.3) in situ, myosin was covalently bound to the surface of 2 kinds of films: collagen and Immunodyne. On collagen films, it was bound either with 1-ethyl-3 (3 dimethyl-aminopropyl)carbodiimide (EDC) or with dimethyl-3,3'-dithiobis(propionimidate) (DTP). The apparent Km for K+-ATP rose from 0.26 mM for free myosin in solution to 2-5 mM for covalently bound myosin, and maximum K+-ATPase activity was very low. With the other film, Immunodyne from Pall, the maximum activity of bound myosin was 170 nmol per min per 1.5 cm2 film. The apparent Km for K+-ATP was 2.1 mM when the incubation mixture was vigorously stirred, and the effect of stirring indicated that the kinetics of K+-ATP hydrolysis are limited by external diffusion. The large amount of myosin bound per unit of Immunodyne film surface permitted the study of Mg2+-ATPase activity, although it was 400-500 times less than the K+-ATPase activity. The apparently non-Michaelian kinetics of Mg2+-ATP hydrolysis are attributable to the external diffusion. The apparent Michaelis constant observed at low Mg2+-ATP concentrations rose from 0.27 microM for myosin in solution to 5 microM for myosin bound to Immunodyne film.     

Kinetic mechanism of human myosin IIIA

Myosin IIIA is specifically expressed in photoreceptors and cochlea and is important for the phototransduction and hearing processes. In addition, myosin IIIA contains a unique N-terminal kinase domain and C-terminal tail actin-binding motif. We examined the kinetic properties of baculovirus expressed human myosin IIIA containing the kinase, motor, and two IQ domains. The maximum actin-activated ATPase rate is relatively slow (k(cat) = 0.77 +/- 0.08 s(-1)), and high actin concentrations are required to fully activate the ATPase rate (K(ATPase) = 34 +/- 11 microm). However, actin co-sedimentation assays suggest that myosin III has a relatively high steady-state affinity for actin in the presence of ATP (K(actin) approximately 7 microm). The rate of ATP binding to the motor domain is quite slow both in the presence and absence of actin (K(1)k(+2) = 0.020 and 0.001 microm(-1).s(-1), respectively). The rate of actin-activated phosphate release is more than 100-fold faster (85 s(-1)) than the k(cat), whereas ADP release in the presence of actin follows a two-step mechanism (7.0 and 0.6 s(-1)). Thus, our data suggest a transition between two actomyosin-ADP states is the rate-limiting step in the actomyosin III ATPase cycle. Our data also suggest the myosin III motor spends a large fraction of its cycle in an actomyosin ADP state that has an intermediate affinity for actin (K(d) approximately 5 microm). The long lived actomyosin-ADP state may be important for the ability of myosin III to function as a cellular transporter and actin cross-linker in the actin bundles of sensory cells.     

Exchange of the fluorescence-labeled 20,000-dalton light chain of smooth muscle myosin.

The 20,000-dalton light chain of smooth muscle myosin was exchanged with exogenous light chain in a solution containing 0.5 M NaCl and 10 mM EDTA at 40 degrees C. The light chain was almost completely exchanged within 30 min under the above conditions. The exchange was markedly inhibited either below 37 degrees C or in the presence of Mg2+ concentrations higher than 10 microM. The 20,000-dalton light chain was selectively labeled of a single thiol (Cys-108) with 5-[[2-[(iodoacetyl)amino]ethyl]amino-naphthalene-1-sulfonic acid (1,5-IAEDANS). The labeled light chain was exchanged stoichiometrically into myosin and was used as a probe to investigate the conformation of smooth muscle myosin. The resulting myosin hybrids showed enzymatic properties virtually identical with those of the control, untreated myosin; i.e., actin-activated ATPase activity was dependent on the 20,000-dalton light-chain phosphorylation catalyzed by myosin light chain kinase, and the 10S-6S conformational transition of myosin correlating with the changes in ATPase was also affected either by the light-chain phosphorylation or by the change in the ionic strength. Steady-state fluorescence antisotropy measurements were performed by varying the temperature. The Perrin-Weber plots were constructed in order to obtain information about the average rotational mobility of the probe and to estimate the rotational correlation time for the AEDANS-myosin head. The fluorescence probe on the 20,000-dalton light chain was found to be quite immobile as indicated by its limiting anisotropy (A0 = 0.33).(ABSTRACT TRUNCATED AT 250 WORDS)     

Phosphorylation in skeletal myosin light chain modulates the actin--myosin interaction in the presence of regulatory proteins in vitro

The effect of phosphorylation in skeletal myosin light chain (LC2) on the actomyosin and acto-heavymeromyosin (HMM) ATPase activities was investigated in the presence or absence of regulatory proteins (tropomyosin-troponin complex). Phosphorylation in LC2 did not modulate the actin-myosin and actin-HMM interactions over a wide range of KCl concentrations from 30 to 150 mM without regulatory proteins. In the presence of regulatory proteins, phosphorylation in myosin LC2 enhanced the ATPase activity of actomyosin with calcium ions, but the removal of calcium ions made little difference in the ATPase activity between phosphorylated and dephosphorylated myosins. Ca2+-sensitivity of the regulated actomyosin was slightly changed by phosphorylation in myosin LC2. However, both the ATPase activity and Ca2+-sensitivity of the regulated acto-HMM were unaffected by phosphorylation in HMM LC2.     

Effects of phosphorylation, magnesium, and filament assembly on actin-activated ATPase of pig urinary bladder myosin

The relationship between the light-chain phosphorylation and the actin-activated ATPase activity of pig urinary bladder myosin was either linear or nonlinear depending on the free Mg2+ concentration. Varying the free [Mg2+] in the presence of 50 mM ionic strength (I) had a biphasic effect on the actin-activated ATPase. In 100 mM I, the activity increased on raising the free [Mg2+]. The activity of the phosphorylated myosin was 3-23-fold higher than that of the unphosphorylated myosin at all concentrations of free Mg2+, pH, and temperature used in this study. The increase in the turbidity and sedimentability of both phosphorylated and unphosphorylated myosins on raising the free [Mg2+] was associated with a rise in the actin-activated ATPase activity. However, myosin light-chain phosphorylation still had a remarkable effect on the actin activation. The myosin polymers formed under these conditions were sedimented by centrifugation. Experiments performed with myosin polymers formed in mixtures of unphosphorylated and phosphorylated myosins showed that the presence of phosphorylated myosin in these mixtures had a slight effect on the sedimentation of the unphosphorylated myosin but it had no effect on the actin-activated ATP hydrolysis. Electron microscopy showed that the unphosphorylated myosin formed unorganized aggregates while phosphorylated myosin molecules assembled into bipolar filaments with tapered ends. These data show that although the unphosphorylated and phosphorylated myosins have the same level of sedimentability and turbidity, the filament assembly present only with the phosphorylated myosin can be associated with the maximal actin activation of Mg-ATPase.     

Purification and characterization of actin-activatable, Ca2+-sensitive myosin II from Acanthamoeba

Approximately 8-10 mg of highly actin-activatable, CA2+-sensitive Acanthamoeba myosin II can be isolated in greater than 98% purity from 100 g of amoeba by the new procedure described in detail in this paper. The enzyme isolated by this procedure can be activated by actin because its heavy chains are not fully phosphorylated (Collins, J. H., and Korn, E. D. (1980) J. Biol Chem. 255, 8011-8014). We now show that Acanthamoeba myosin II Mg2+-ATPase activity is more highly activated by Acanthamoeba actin than by muscle actin. Also, actomyosin II ATPase is inactive at concentrations of free Mg2+ lower than about 3 mM and fully active at Mg2+ concentrations greater than 4 mM. Actomyosin II Mg2+-ATPase activity is stimulated by micromolar Ca2+ when assayed over the narrow range of about 3-4 mM Mg2+ but is not affected by Ca2+ at either lower or higher concentrations of Mg2+. The specific activity of te actomyosin II Mg2+-ATPase also increases with increasing concentrations of myosin II when the free Mg2+ concentration is in the range of 3-4 mM but is independent of the myosin II concentration at lower or higher concentrations of Mg2+ . This marked effect of the Mg2+ concentration on the Ca2+-sensitivity and myosin concentration-dependence of th specific activity of actomyosin II ATPase activity does not seem to be related to the formation of myosin filaments, and to be related to the formation of myosin filaments, and myosin II is insoluble only at high concentrations of free Mg2+ (6-7 mM) were neither of these effects is observed. Also, the Mg2+ requirements for actomyosin II ATPase activity and myosin II insolubility can be differentially modified by EDTA and sucrose.     

Reversible dissociation of dog cardiac myosin regulatory light chain 2 and its influence on ATP hydrolysis

The regulatory light chains of dog heart myosin were removed by digestion with myopathic hamster neutral protease. The heavy chains were also cleaved to an extent of 15%, but a homogeneous, rod-free LC2-deficient myosin was obtained by ion-exchange chromatography. A similar approach was used to prepare LC2-deficient heavy meromyosin. Neither Ca2+- nor K+-EDTA-activated ATPases were affected by LC2 removal. The Lineweaver-Burk plots for actin-activated ATPase in 25 mM KCl were biphasic giving a Vmax of 1.54 s-1 for control and LC2-recombined myosins and 1.08 s-1 for LC2-deficient myosin at low actin concentrations. At high actin concentrations, the Vmax for control and recombined myosins was 2.33 s-1 and 1.39 s-1 for LC2-deficient myosin. Increasing the KCl concentration in the reaction mixtures resulted in more linear plots without suppressing the 35-45% decrease in Vmax that accompanied LC2 removal. The results from assays with control and LC2-deficient heavy meromyosin performed in the absence of KCl, paralleled those obtained with myosin. The latter was also assayed in the presence of equimolar concentrations of C-protein in 50 mM KCl: C-protein induced a significant increase in the actin-activated ATPase of both control and LC2-recombined myosins, with no effect on LC2-deficient myosin. The Vmax for actin-activation in the presence of C-protein was 2.38 s-1, 0.83 s-1, and 1.71 s-1 for control, LC2-deficient, and recombined myosins, respectively. The enhancement of actin-activation in both the control and LC2-recombined myosins represents a possible role for C-protein in a LC2-mediated potentiation of actomyosin ATPase.     

Purification and characterization of squid brain myosin.

Myosin was extracted from frozen squid brain and purified by a modification of the procedure of Pollard et al. (Pollard, T.D., Thomas, S.M., and Niederman, R. (1974) Anal. Biochem. 60, 258-266). Myosin was eluted from Bio-Gel A-15m column as a single peak of (K+-EDTA)-activated ATPase ((K+-EDTA)-ATPase) activity with an average partition coefficient (Kav) of 0.22. In sodium dodecyl sulfate-acrylamide gel electrophoresis, the purified myosin showed a predominant band with similar electrophoretic mobility as the heavy chain of rabbit skeletal muscle myosin, and two less intense bands near the bottom of the gel. No actin band was seen. The properties of the (K+-EDTA)-ATPase activity were: (a) the time course of the reaction was biphasic at 25 degrees but linear at 32 degrees; (b) the optimum rate of reaction was obtained between 0.3 and 0.8 M KCl; (c) the pH optimum was between 8.0 and 9.0; (d) the reaction was specific for ATP with an apparent Km of 0.19 mM. ATPase activity in 0.06 M KCl and 5 mM MgCl2 was increased about 1.5 times by a 10-fold excess of rabbit skeletal muscle F-actin and about 5 times by a 40-fold excess. The actin activation was inhibited slightly by the addition of 0.2 mM CaCl2 and completely by the addition of 10 mM CaCl2. Myosin formed arrowhead patterns with rabbit skeletal muscle F-actin as observed by electron microscopy of negatively stained samples. It also aggregated in bipolar filaments which attached to decorated actin filaments at different angles, as well as formed cross-connections and ladder-like patterns between actin filaments. These two forms of interactions between myosin and actin were abolished by treatment with MgATP.     

Macromolecular assemblies of myosin.

The self-assembly of myosin into filamentous structures is a highly cooperative and rapid process. Nevertheless, the presence of nonequivalent bonding interactions within the filament permits differential stabilization of several macromolecular assemblies of myosin under well-controlled ionic conditions in citrate/Tris buffer at pH 8.0. We have detected and characterized bipolar myosin minifilaments, myosin octamers, and tetramers by using light scattering, analytical ultracentrifugation, and viscosity techniques. These structures have molecular weights of 8.0 X 10(6), 3.9 X 10(6) g/mol, sedimentation coefficients of 32S, 22S, and 18S, and radii of gyration of 990 A, 890 A and 790, A, respectively. The similar radii of gyration indicate similar bipolar geometry for all these particles. The 32S minifilaments in 10 mM citrate/Tris buffer (pH 8.0) are the most stable species. The smaller 18S and 22S assemblies in 2 mM and 5 mM citrate/Tris, pH 8.0, are readily affected by low concentrations of KCl and fuse into the minifilament particles. The instability of the 18S and 22S forms of myosin assembly is also revealed by their titration with ATP. These structures are dissociated at lower ATP concentrations than the minifilaments and do not show the cooperative dissociation transitions characteristic of filaments and minifilaments. Sedimentation velocity analysis of the 18S and 22S species in the presence of ATP reveals the involvement of 10S myosin dimer in the dissociation of assembled myosin. The different forms of assembled myosin are discussed in the context of formation of myosin minifilaments.