A structural comparison of tryptic fragments of three types of intermediate filaments

We have compared tryptic fragments of three types of intermediate filaments, emphasizing structural characteristics as seen in the electron microscope. Variable, long alpha-helical rod fragments were found to be similar for keratin, neurofilaments and desmin filaments. Short rod fragments from keratin and neurofilaments appeared similar when observed by electron microscopy. Short rod fragments were not seen in desmin filament digests. In addition to these elongated particles, globular fragments, which have not been described previously, were obtained from all three types of intermediate filaments. These globular fragments were characterized by gel filtration and electron microscopy, and compared to globular proteins of known size using both methods. The diameter was about 6 nm and the molecular weight was estimated to be 50 000-60 000. These globular particles may comprise the short, nonhelical regions from several IF protein subunits, which are clustered into an interface in the intact filament or protofilaments.     

RecA K72R filament formation defects reveal an oligomeric RecA species involved in filament extension

Using an ensemble approach, we demonstrate that an oligomeric RecA species is required for the extension phase of RecA filament formation. The RecA K72R mutant protein can bind but not hydrolyze ATP or dATP. When mixed with other RecA variants, RecA K72R causes a drop in the rate of ATP hydrolysis and has been used to study disassembly of hydrolysis-proficient RecA protein filaments. RecA K72R filaments do not form in the presence of ATP but do so when dATP is provided. We demonstrate that in the presence of ATP, RecA K72R is defective for extension of RecA filaments on DNA. This defect is partially rescued when the mutant protein is mixed with sufficient levels of wild type RecA protein. Functional extension complexes form most readily when wild type RecA is in excess of RecA K72R. Thus, RecA K72R inhibits hydrolysis-proficient RecA proteins by interacting with them in solution and preventing the extension phase of filament assembly.     

Tissue-specific co-expression and in vitro heteropolymer formation of the two small branchiostoma intermediate filament proteins A3 and B2

The two small intermediate filament (IF) proteins A3 and B2 of the cephalochordate Amphioxus were investigated. Blot overlays indicated a heterotypic interaction pattern of the recombinant proteins. While the individual proteins formed only aggregates, the stoichiometric mixture formed obligatory heteropolymeric filaments. Mutant proteins with a single cysteine residue in equivalent positions gave rise to filaments that oxidize to the disulfide-linked heterodimer, which can again form IF. Thus the A3/B2 filaments, which are expressed in the intestinal epithelium, are based on a hetero coiled coil. This keratin-like assembly process of A3 plus B2 was unexpected, since previous evolutionary tree calculations performed by two laboratories on the various Amphioxus IF proteins identified keratin I and II orthologs but left the A/B group as a separate branch. We discuss obvious evolutionary aspects of the Amphioxus IF multigene family, including the previously made observation that B1, the closest relative of B2, forms homopolymeric IF in vitro and is, like vertebrate type III proteins, expressed in mesodermally derived tissues.     

Basic amino acid residue cluster within nuclear targeting sequence motif is essential for cytoplasmic plectin-vimentin network junctions

We have generated a series of plectin deletion and mutagenized cDNA constructs to dissect the functional sequences that mediate plectin's interaction with intermediate filament (IF) networks, and scored their ability to coalign or disrupt intermediate filaments when ectopically expressed in rat kangaroo PtK2 cells. We show that a stretch of approximately 50 amino acid residues within plectin's carboxy-terminal repeat 5 domain serves as a unique binding site for both vimentin and cytokeratin IF networks of PtK2 cells. Part of the IF-binding domain was found to constitute a functional nuclear localization signal (NLS) motif, as demonstrated by nuclear import of cytoplasmic proteins linked to this sequence. Site directed mutagenesis revealed a specific cluster of four basic amino acid residues (arg4277-arg4280) residing within the NLS sequence motif to be essential for IF binding. When mutant proteins corresponding to those expressed in PtK2 cells were expressed in bacteria and purified proteins subjected to a sensitive quantitative overlay binding assay using Eu3+-labeled vimentin, the relative binding capacities of mutant proteins measured were fully consistent with the mutant's phenotypes observed in living cells. Using recombinant proteins we also show by negative staining and rotary shadowing electron microscopy that in vitro assembled vimentin intermediate filaments become packed into dense aggregates upon incubation with plectin repeat 5 domain, in contrast to repeat 4 domain or a mutated repeat 5 domain.     

Role of the aromatic residues in the near-amino terminal motif of vimentin in intermediate filament assembly in vitro

Type III and IV intermediate filament (IF) proteins share a conserved sequence motif of -Tyr-Arg-Arg-X-Phe- at the near-amino termini. To characterize significance of the aromatic residues in the motif, we prepared vimentin mutants in which Tyr-10 and Phe-14 are substituted with Asn and Ser (Vim[Y10N], Vim[F14S] and Vim[Y10N, F14S]), and examined assembly properties in vitro by electron microscopy and viscosity measurements. At 2 s after initiation of assembly reaction at pH 7.2 and 150 mM NaCl, all the vimentin mutants formed so-called unit-length filaments (ULFs) that were slightly larger than ULFs of wild-type vimentin. In following filament elongation, Vim[Y10N, F14S] and Vim[Y10N] performed longitudinal annealing of ULFs very rapidly and formed IFs within only 2.5 and 5 min, respectively, while Vim[F14S] and wild-type vimentin gave IFs by 40-60 min. The IFs of Vim[Y10N, F14S] and Vim[Y10N], however, tended to intertwine each other and formed bundles in parts of the specimens. The intertwinements decreased as the salt concentration decreased, and optimal salt concentration for the two mutants to form normal IFs was 50 mM. These results suggest that the aromatic residues, especially Tyr-10, in the motif have a role in controlling intermolecular interactions involved in IF assembly in vitro and suppress undesirable filament intertwinements at physiological ionic strength.     

In vitro assembly properties of mutant and chimeric intermediate filament proteins: insight into the function of sequences in the rod and end domains of IF

The factors and mechanisms regulating assembly of intermediate filament (IF) proteins to produce filaments with their characteristic 10 nm diameter are not fully understood. All IF proteins contain a central rod domain flanked by variable head and tail domains. To elucidate the role that different domains of IF proteins play in filament assembly, we used negative staining and electron microscopy (EM) to study the in vitro assembly properties of purified bacterially expressed IF proteins, in which specific domains of the proteins were either mutated or swapped between a cytoplasmic (mouse neurofilament-light (NF-L) subunit) and nuclear intermediate filament protein (human lamin A). Our results indicate that filament formation is profoundly influenced by the composition of the assembly buffer. Wild type (wt) mouse NF-L formed 10 nm filaments in assembly buffer containing 175 mM NaCl, whereas a mutant deleted of 18 NH2-terminal amino acids failed to assemble under similar conditions. Instead, the mutant assembled efficiently in buffers containing CaCl2 > or = 6 mM forming filaments that were 10 times longer than those formed by wt NF-L, although their diameter was significantly smaller (6-7 nm). These results suggest that the 18 NH2-terminal sequence of NF-L might serve two functions, to inhibit filament elongation and to promote lateral association of NF-L subunits. We also demonstrate that lengthening of the NF-L rod domain, by inserting a 42 aa sequence unique to nuclear IF proteins, does not compromise filament assembly in any noticeable way. Our results suggests that the known inability of nuclear lamin proteins to assemble into 10 nm filaments in vitro cannot derive solely from their longer rod domain. Finally, we demonstrate that the head domain of lamin A can substitute for that of NF-L in filament assembly, whereas substitution of both the head and tail domains of lamins for those of NF-L compromises assembly. Therefore, the effect of lamin A "tail" domain alone, or the synergistic effect of lamin "head" and the "tail" domains together, interferes with assembly into 10-nm filaments.     

Regulation of myosin-IIA assembly and Mts1 binding by heavy chain phosphorylation

Previous studies suggested that heavy chain phosphorylation regulates non-muscle myosin-II assembly in an isoform-specific manner, affecting the assembly of myosin-IIB, but not myosin-IIA. We re-examined the effects of heavy chain phosphorylation on myosin-IIA filament formation and also examined mts1 binding. We demonstrated that heavy chain phosphorylation by either protein kinase C (PKC) or casein kinase 2 (CK2) inhibits the assembly of myosin-IIA into filaments. PKC phosphorylation had no affect on mts1 binding, but CK2 phosphorylation decreased the affinity of mts1 for the myosin-IIA rod by approximately 6.5-fold. Mts1 destabilized PKC-phosphorylated myosin-IIA filaments and inhibited the assembly of myosin-IIA monomers with maximal inhibition of assembly and promotion of disassembly occurring at a molar ratio of one mts1 dimer per myosin-IIA rod. At this molar ratio, mts1 only weakly disassembled CK2-phosphorylated myosin-IIA filaments and weakly inhibited the assembly of CK2-phosphorylated myosin-IIA monomers. These observations demonstrate that CK2 phosphorylation of the myosin-IIA heavy chain protects against mts1-induced filament disassembly and inhibition of assembly, and suggest that heavy chain phosphorylation provides an additional level of regulation for the mts1-myosin-IIA interaction.     

Dynamic properties of intermediate filaments: disassembly and reassembly during mitosis in baby hamster kidney cells

A morphological analysis of the organizational changes in the type III intermediate filament (IF) system in dividing baby hamster kidney (BHK-21) cells was carried out by immunofluorescence and immunoelectron microscopy. The most dramatic change occurred during prometaphase, when the typical network of long 10-nm-diameter IF characteristic of interphase cells disassembled into aggregates containing short 4-6 nm filaments. During anaphase-telophase, arrays of short IF reappeared throughout the cytoplasm, and, in cytokinesis, the majority of IF were longer and concentrated in a juxtanuclear cap. These results demonstrate that the relatively stable IF cytoskeletal system of interphase cells is partitioned into daughter cells during mitosis by a process of disassembly and reassembly. This latter process occurs in a series of morphologically distinct steps at different stages of the mitotic process.     

Expression of plectin mutant cDNA in cultured cells indicates a role of COOH-terminal domain in intermediate filament association

Plectin is an intermediate filament (IF) binding protein of exceptionally large size. Its molecular structure, revealed by EM and predicted by its sequence, indicates an NH2-terminal globular domain, a long rodlike central domain, and a globular COOH-terminal domain containing six highly homologous repeat regions. To examine the role of the various domains in mediating plectin's interaction with IFs, we have constructed rat cDNAs encoding truncated plectin mutants under the control of the SV-40 promoter. Mutant proteins expressed in mammalian COS and PtK2 cells could be distinguished from endogenous wild type plectin by virtue of a short carboxy-terminal antigenic peptide (P tag). As shown by conventional and confocal immunofluorescence microscopy, the transient expression of plectin mutants containing all six or the last four of the repeat regions of the COOH-terminus, or the COOH-terminus and the rod, associated with IF networks of both the vimentin and the cytokeratin type and eventually caused their collapse into perinuclear aggregates. Similar effects were observed upon expression of a protein encoded by a full length cDNA construct. Microtubules and microfilaments were unaffected. Unexpectedly, mutants containing the rod without any of the COOH-terminal repeats, accumulated almost exclusively within the nuclei of cells. When the rod was extended by the first one and a half of the COOH-terminal repeats, mutant proteins showed a partial cytoplasmic distribution, although association with intermediate filaments was not observed. Nuclear and diffuse cytoplasmic distribution was also observed upon expression of the NH2-terminal domain without rod. These results indicate that sequences located roughly within the last two thirds of the globular COOH-terminus are indispensable for association of plectin with intermediate filaments in living cells.     

Characterization of early assembly intermediates of recombinant human keratins

The intermediate filaments (IFs) form major structural elements of the cytoskeleton. In vitro analyses of these fibrous proteins reveal very different assembly properties for the nuclear and cytoplasmic IF proteins. However, keratins in particular, the largest and most heterogenous group of cytoplasmic IF proteins, have been difficult to analyze due to their rapid assembly dynamics under the near-physiological conditions used for other IF proteins. We show here that keratins, like other cytoplasmic IF proteins, go through a stage of assembling into full-width soluble complexes, i.e., "unit-length filaments" (ULFs). In contrast to other IF proteins, however, longitudinal annealing of keratin ULFs into long filaments quasi-coincides with their formation. In vitro assembly of IF proteins into filaments can be initiated by an increase of the ionic strength and/or lowering of the pH of the assembly buffer. We now document that 23-mer peptides from the head domains of various IF proteins can induce filament formation even under conditions of low salt and high pH. This suggests that the "heads" are involved in the formation and longitudinal association of the ULFs. Using a Tris-buffering protocol that causes formation of soluble oligomers at pH 9, the epidermal keratins K5/14 form less regular filaments and less efficiently than the simple epithelial keratins K8/18. In sodium phosphate buffers (pH 7.5), however, K5/14 were able to form long partially unraveled filaments which compacted into extended, regular filaments upon addition of 20 mM KCl. Applying the same assembly regimen to mutant K14 R125H demonstrated that mutations causing a severe disease phenotype and morphological filament abnormalities can form long, regular filaments with surprising efficiency in vitro.     

Nestin promotes the phosphorylation-dependent disassembly of vimentin intermediate filaments during mitosis

The expression of the intermediate filament (IF) protein nestin is closely associated with rapidly proliferating progenitor cells during neurogenesis and myogenesis, but little is known about its function. In this study, we examine the effects of nestin expression on the assembly state of vimentin IFs in nestin-free cells. Nestin is introduced by transient transfection and is positively correlated with the disassembly of vimentin IFs into nonfilamentous aggregates or particles in mitotic but not interphase cells. This nestin-mediated disassembly of IFs is dependent on the phosphorylation of vimentin by the maturation/M-phase-promoting factor at ser-55 in the amino-terminal head domain. In addition, the disassembly of vimentin IFs during mitosis appears to be a unique feature of nestin-expressing cell types. Furthermore, when the expression of nestin is downregulated by the nestin-specific small interfering RNA in nestin-expressing cells, vimentin IFs remain assembled throughout all stages of mitosis. Previous studies suggest that nonfilamentous vimentin particles are IF precursors and can be transported rapidly between different cytoplasmic compartments along microtubule tracks. On the basis of these observations, we speculate that nestin may play a role in the trafficking and distribution of IF proteins and potentially other cellular factors to daughter cells during progenitor cell division.     

Identification of a nonapeptide motif in the vimentin head domain involved in intermediate filament assembly.

The assembly of soluble vimentin subunits into intermediate filaments (IFs) is dependent on information located in the amino-terminal domain. Using site-directed mutagenesis of a Xenopus laevis vimentin cDNA and an Escherichia coli production system to obtain pure mutated protein, we have identified, in the head domain, a nine amino acid motif (SSYRRIFGG), evolutionarily conserved from amphibia to man, which plays an important role in the orderly formation of IFs. Exchanges in the central di-arginine and in the two aromatic residues interfere with IF assembly of vimentin in vitro: on assembly under standard assembly conditions (160 mM-NaCl) most of the protein is included in dense aggregates, with a variable and minor proportion of IFs, whereas at lower ionic concentrations short and incomplete IF-like structures are formed. The deletion of the whole motif results in a protein that under standard assembly conditions (e.g. 160 mM-NaCl) predominantly and rapidly precipitates into large aggregates of non-IF material, whereas at lower ionic strength (e.g. 50 mM-NaCl) both IFs and dense aggregates are formed simultaneously. Our results show that the mutated protein can assume different forms at the same time and under the same conditions. This motif alone is insufficient for the formation of normal IFs as demonstrated by a mutant in which the motif has been brought closer to the alpha-helical rod domain by deletion of 55 internal amino acid residues. Corresponding observations have been made, by immunofluorescence microscopy, upon transfection of cultured epithelial cells lacking vimentin IFs. The importance of the head domain motif for the assembly and higher-order arrangement of IFs is discussed.     

A 300,000-mol-wt intermediate filament-associated protein in baby hamster kidney (BHK-21) cells

Native intermediate filament (IF) preparations from the baby hamster kidney fibroblastic cell line (BHK-21) contain a number of minor polypeptides in addition to the IF structural subunit proteins desmin, a 54,000-mol-wt protein, and vimentin, a 55,000-mol-wt protein. A monoclonal antibody was produced that reached exclusively with a high molecular weight (300,000) protein representative of these minor proteins. Immunological methods and comparative peptide mapping techniques demonstrated that the 300,000-mol-wt species was biochemically distinct from the 54,000- and 55,000-mol-wt proteins. Double-label immunofluorescence observations on spread BHK cells using this monoclonal antibody and a rabbit polyclonal antibody directed against the 54,000- and 55,000-mol-wt proteins showed that the 300,000-mol-wt species co-distributed with IF in a fibrous pattern. In cells treated with colchicine or those in the early stages of spreading, double-labeling with these antibodies revealed the co-existence of the respective antigens in the juxtanuclear cap of IF that is characteristic of cells in these physiological states. After colchicine removal, or in the late stages of cell spreading, the 300,00-mol-wt species and the IF subunits redistributed to their normal, highly coincident cytoplasmic patterns. Ultrastructural localization by the immunogold technique using the monoclonal antibody supported the light microscopic findings in that the 300,000-mol-wt species was associated with IF in the several physiological and morphological cell states investigated. The gold particle pattern was less intimately associated with IF than that defined by anti-54/55 and was one of non-uniform distribution along IF, being clustered primarily at points of proximity between IF, where an amorphous, proteinaceous material was often the labeled element. Occasionally, "bridges" of label were seen extending outward from such clusters on IF. Gold particles were infrequently bound to microtubules, microfilaments, or other cellular organelles, and when so, IF were usually contiguous. During multiple cycles of in vitro disassembly/assembly of the IF from native preparations, the 300,000-mol-wt protein remained in the fraction containing the 54,000- and 55,000-mol-wt structural subunits, whether the latter were in the soluble state or pelleted as formed filaments. In keeping with the nomenclature developed for the microtubule-associated proteins (MAPs), the acronym IFAP-300K (intermediate filament associated protein) is proposed for this molecule.     

MgATP specifically controls in vitro self-assembly of vertebrate skeletal myosin in the physiological pH range

The appearances in the electron microscope of rat and rabbit skeletal muscle myosin filaments and rod aggregates, formed in the presence of variable amounts of MgATP, were compared at different pH values. It is shown that small amounts of MgATP, similar to those sufficient to trigger the dissociation of the actomyosin complex, were able to modify the geometry of myosin filaments profoundly in the physiological pH range, whereas the conformation of rod aggregates remained unchanged even in the presence of high concentrations of MgATP. Myosin filaments formed in the absence of MgATP displayed the classical spindle-shaped conformation and variable diameters at all pH values, whereas myosin filaments formed in the presence of MgATP in the physiological pH range had constant diameters, similar to those of natural thick filaments. These filaments of constant diameter frayed, rapidly and reversibly, into two types of subfilaments with respective diameters of 4 to 5 nm and 9 to 10 nm, when the pH of the medium was raised above 7.2. Spindle-shaped myosin filaments and rod aggregates remained unchanged by such small changes in pH. It was possible to change the conformation of preformed spindle-shaped filaments by simply adding MgATP to the medium, but this reaction was slow and took several hours to be completed. Relatively high concentrations of MgATP, similar to those in the living cell, increased the solubility of both myosin filaments and rod aggregates in the alkaline pH range (pH greater than or equal to 7.0). Low pH values (less than or equal to 6.5) and excess free Mg2+ (greater than or equal to 6 to 7 mM) abolished both the specific effect of MgATP on myosin filament conformation and its solubilizing effect on both myosin filaments and rod aggregates. The degree of purity of the myosin preparations and the level of phosphorylation of the LC-2 light chains did not influence filament behaviour noticeably and rat and rabbit myosins behaved similarly.     

The function of intermediate filaments in cell shape and cytoskeletal integrity

This study describes the development and use of a specific method for disassembling intermediate filament (IF) networks in living cells. It takes advantage of the disruptive effects of mimetic peptides derived from the amino acid sequence of the helix initiation 1A domain of IF protein chains. The results demonstrate that at 1:1 molar ratios, these peptides disassemble vimentin IF into small oligomeric complexes and monomers within 30 min at room temperature in vitro. Upon microinjection into cultured fibroblasts, these same peptides induce the rapid disassembly of IF networks. The disassembly process is accompanied by a dramatic alteration in cell shape and the destabilization of microtubule and actin-stress fiber networks. These changes in cell shape and IF assembly states are reversible. The results are discussed with respect to the roles of IF in cell shape and the maintenance of the integrity and mechanical properties of the cytoplasm, as well as the stability of the other major cytoskeletal systems.     

The formation of straight and twisted filaments from short tau peptides

We studied fibril formation in a family of peptides based on PHF6 (VQIVYK), a short peptide segment found in the microtubule binding region of tau protein. N-Acetylated peptides AcVYK-amide (AcVYK), AcIVYK-amide (AcPHF4), AcQIVYK-amide (AcPHF5), and AcV-QIVYK-amide (AcPHF6) rapidly formed straight filaments in the presence of 0.15 m NaCl, each composed of two laterally aligned protofilaments approximately 5 nm in width. X-ray fiber diffraction showed the omnipresent sharp 4.7-A reflection indicating that the scattering objects are likely elongated along the hydrogen-bonding direction in a cross-beta conformation, and Fourier transform IR suggested the peptide chains were in a parallel (AcVYK, AcPHF6) or antiparallel (AcPHF4, AcPHF5) beta-sheet configuration. The dipeptide N-acetyl-YK-amide (AcYK) formed globular structures approximately 200 nm to 1 microm in diameter. The polymerization rate, as measured by thioflavin S binding, increased with the length of the peptide going from AcYK --> AcPHF6, and peptides that aggregated most rapidly displayed CD spectra consistent with beta-sheet structure. There was a 3-fold decrease in rate when Val was substituted for Ile or Gln, nearly a 10-fold decrease when Ala was substituted for Tyr, and an increase in polymerization rate when Glu was substituted for Lys. Twisted filaments, composed of four laterally aligned protofilaments (9-19 nm width, approximately 90 nm half-periodicity), were formed by mixing AcPHF6 with AcVYK. Taken together these results suggest that the core of PHF6 is localized at VYK, and the interaction between small amphiphilic segments of tau may initiate nucleation and lead to filaments displaying paired helical filament morphology.     

Structural analysis of vimentin and keratin intermediate filaments by cryo-electron tomography

Intermediate filaments are a large and structurally diverse group of cellular filaments that are classified into five different groups. They are referred to as intermediate filaments (IFs) because they are intermediate in diameter between the two other cytoskeletal filament systems that is filamentous actin and microtubules. The basic building block of IFs is a predominantly alpha-helical rod with variable length globular N- and C-terminal domains. On the ultra-structural level there are two major differences between IFs and microtubules or actin filaments: IFs are non-polar, and they do not exhibit large globular domains. IF molecules associate via a coiled-coil interaction into dimers and higher oligomers. Structural investigations into the molecular building plan of IFs have been performed with a variety of biophysical and imaging methods such as negative staining and metal-shadowing electron microscopy (EM), mass determination by scanning transmission EM, X-ray crystallography on fragments of the IF stalk and low-angle X-ray scattering. The actual packing of IF dimers into a long filament varies between the different families. Typically the dimers form so called protofibrils that further assemble into a filament. Here we introduce new cryo-imaging methods for structural investigations of IFs in vitro and in vivo, i.e., cryo-electron microscopy and cryo-electron tomography, as well as associated techniques such as the preparation and handling of vitrified sections of cellular specimens.     

Do the ends justify the mean? Proline mutations at the ends of the keratin coiled-coil rod segment are more disruptive than internal mutations

Intermediate filament (IF) assembly is remarkable, in that it appears to be self-driven by the primary sequence of IF proteins, a family (40-220 kd) with diverse sequences, but similar secondary structures. Each IF polypeptide has a central 310 amino acid residue alpha-helical rod domain, involved in coiled-coil dinner formation. Two short (approximately 10 amino acid residue) stretches at the ends of this rod are more highly conserved than the rest, although the molecular basis for this is unknown. In addition, the rod is segmented by three short nonhelical linkers of conserved location, but not sequence. To examine the degree to which different conserved helical and nonhelical rod sequences contribute to dimer, tetramer, and higher ordered interactions, we introduced proline mutations in residues throughout the rod of a type I keratin, and we removed existing proline residues from the linker regions. To further probe the role of the rod ends, we introduced more subtle mutations near the COOH-terminus. We examined the consequences of these mutations on (a) IF network formation in vivo, and (b) 10-nm filament assembly in vitro. Surprisingly, all proline mutations located deep in the coiled-coil rod segment showed rather modest effects on filament network formation and 10-nm filament assembly. In addition, removing the existing proline residues was without apparent effect in vivo, and in vitro, these mutants assembled into 10-nm filaments with a tendency to aggregate, but with otherwise normal appearance. The most striking effects on filament network formation and IF assembly were observed with mutations at the very ends of the rod. These data indicate that sequences throughout the rod are not equal with respect to their role in filament network formation and in 10-nm filament assembly. Specifically, while the internal rod segments seem able to tolerate considerable changes in alpha-helical conformation, the conserved ends seem to be essential for creating a very specific structure, in which even small perturbations can lead to loss of IF stability and disruption of normal cellular interactions. These findings have important implications for the disease Epidermolysis Bullosa Simplex, arising from point mutations in keratins K5 or K14.     

A τ Fragment Containing a Repetitive Sequence Induces Bundling of Actin Filaments

Abstract: Much indirect evidence suggests that the interconnections of actin microfilaments with the microtubule system are mediated by microtubule-associated proteins (MAPs). In this study we provide new data to support the interaction of a specific tubulin-binding domain on τ with actin in vitro. In actin polymerization assays, the synthetic peptide VRSKIGSTENLKHQPGGG, corresponding to the first repetitive sequence of τ protein, increased turbidity at 320 nm in a dose-dependent fashion. A salient feature of the τ peptide-induced assembly process is the formation of a large amount of actin filament bundles, as revealed by electron microscopic analysis. An increase in the τ peptide concentration resulted in a proportional increase in the bundling of actin filaments. It is interesting that a gradual decrease of pH within the range 7.6–4.7 resulted in a higher effect of τ peptide in promoting bundles of actin filaments. A similar pH-dependent effect was observed for τ protein-induced bundling. An analysis of the mechanisms that operate in the peptide induction of actin filament bundles suggests the involvement of electrostatic forces, because the neutralization of ɛ-aminolysyl residues by selective carbamoylation resulted in a complete loss of the peptide induction of actin bundles. The data suggest that a τ repetitive sequence (also found in MAP-2 and MAP-4) containing a common tubulin binding motif may constitute a functional domain on τ for the dynamics of the interconnections between actin filaments and microtu-bules.