Biotransformation of aromatic and heterocyclic amides by amidase of whole cells of Rhodococcus sp. MTB5: Biocatalytic characterization and substrate specificity

In this study, an amidohydrolase activity of amidase in whole cells of Rhodococcus sp. MTB5 has been used for the biotransformation of aromatic, monoheterocyclic and diheterocyclic amides to corresponding carboxylic acids. Benzoic acid, nicotinic acid and pyrazinoic acid are carboxylic acids which have wide industrial applications. The amidase of this strain is found to be inducible in nature. The biocatalytic conditions for amidase present in the whole cells of MTB5 were optimized against benzamide. The enzyme exhibited optimum activity in 50?mM potassium phosphate buffer pH 7.0. The optimum temperature and substrate concentrations for this enzyme were 50?°C and 50?mM, respectively. The enzyme was quite stable for more than 6?h at 30?°C. It showed substrate specificity against different amides, including aliphatic, aromatic and heterocyclic amides. Under optimized reaction conditions, the amidase is capable of converting 50?mM each of benzamide, nicotinamide and pyrazinamide to corresponding acids within 100, 160 and 120?min, respectively, using 5?mg dry cell mass (DCM) per mL of reaction mixture. The respective percent conversion of these amides was 95.02%, 98.00% and 98.44% achieved by whole cells. The amidase in whole cells can withstand as high as 383?mM concentration of product in a reaction mixture and above which it undergoes product feedback inhibition. The results of this study suggest that Rhodococcus sp. MTB5 amidase has the potential for large-scale production of carboxylic acids of industrial value.     

Switching the secondary and natural activity of Nitrilase from Acidovorax facilis 72 W for the efficient production of 2-picolinamide

Objectives

Catalytic promiscuity, or the ability to catalyze a secondary reaction, provides new opportunities for industrial biocatalysis by expanding the range of biocatalytic reactions. Some nitrilases converting nitriles to amides, referred to as the secondary activity, show great potential for amides production. And our goal was exploiting the amide-forming potential of nitrilases.

Results

In this study, we characterized and altered the secondary activity of nitrilase from Acidovorax facilis 72 W (Nit72W) towards different substrates. We increased the secondary activity of Nit72W towards 2-cyanopyridine by 196-fold and created activity toward benzonitrile and p-nitrophenylacetonitrile by modifying the active pocket. Surprisingly, the best mutant, W188M, completely converted 250 mM 2-cyanopyridine to more than 98% 2-picolinamide in 12 h with a specific activity of 90 U/mg and showed potential for industrial applications.

Conclusions

Nit72W was modified to increase its secondary activity for the amides production, especially 2-picolinamide.

     

Enhancing the production of uridine 5′-monophosphate by recombinant <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> using a whole cell biocatalytic process

Attempts were made with success to produce uridine 5′-monophosphate (UMP) from orotic acid by a recombinant Saccharomyces cerevisiae strain pYX212-URA5/BJX12, using the whole cell biocatalytic process. URA5 and URA3 genes, encoding orotate phosphoribosytransferase (OPRTase) and orotidine monophosphate decarboxylase (ODCase), respectively were successfully overexpressed in the industrial yeast strain. As a result, S .cerevisae pYX212-URA5/BJX12 exhibited the highest biocatalytic ability, in contrast with the original industrial yeast strain and S. cerevisae pYX212/BJX12 that overexpressed ODCase only. It indicated that the first step of UMP production from orotic acid is a rate-limiting step. Effects of cultivation for the recombinant strain and biocatalytic reaction conditions on UMP production were also investigated. Cultivating the cells in malt extract medium for 36 h in the exponential phase of growth is in favor of converting orotic acid to UMP. To acquire a higher UMP yield, the conditions of the whole cell biocatalytic reaction were optimized and up to 3.8 g l⁻¹ UMP was produced in 24 h consequently. The yield was fivefold higher than the original UMP yield from the industrial yeast. In addition, the accumulation of 2.6 g l⁻¹ UDP (uridne 5′-diphosphate) in the process demonstrated the possibility for further genetic manipulation: deleting the UMPK (Uridylate Kinase, catalyzing UMP–UDP).     

Fungal nitrilases as biocatalysts: Recent developments

Of the numerous putative fungal nitrilases available from protein databases only a few enzymes were purified and characterized. The purified nitrilases from Fusarium solani, Fusarium oxysporum f. sp. melonis and Aspergillus niger share a preference for (hetero)aromatic nitriles, temperature optima between 40 and 50 °C and pH optima in the slightly alkaline region. On the other hand, they differ in their chemoselectivity, i.e. their tendency to produce amides as by-products. The production of fungal nitrilases is increased by up to three orders of magnitude on the addition of 2-cyanopyridine to the culture media. The whole-cell and subcellular biocatalysts were immobilized by various methods (LentiKats®; adsorption on hydrophobic or ion exchange resins; cross-linked enzyme aggregates). Operational stability was examined using continuous stirred membrane bioreactors. Fungal nitrilases appear promising for biocatalytic applications and biodegradation of nitrile environmental contaminants.     

Highly enantioselective reduction of 4-(trimethylsilyl)-3-butyn-2-one to enantiopure (R)-4-(trimethylsilyl)-3-butyn-2-ol using a novel strain Acetobacter sp. CCTCC M209061

The biocatalytic reduction of 4-(trimethylsilyl)-3-butyn-2-one to enantiopure (R)-4-(trimethylsilyl)-3-butyn-2-ol was successfully conducted with high enantioselectivity using immobilized whole cells of a novel strain Acetobacter sp. CCTCC M209061, newly isolated from kefir. Compared with other microorganisms that were investigated, Acetobacter sp. CCTCC M209061 was shown to be more effective for the bioreduction reaction, and afforded much higher yield and product enantiomeric excess (e.e.). The optimal buffer pH, co-substrate concentration, reaction temperature, substrate concentration and shaking rate were 5.0, 130.6 mM, 30 °C, 6.0 mM and 180 r/min, respectively. Under the optimized conditions, the maximum yield and the product e.e. were 71% and >99%, respectively, which are much higher than those reported previously. Additionally, the established biocatalytic system proved to be efficient for the bioreduction of acetyltrimethylsilane to (R)-1-trimethylsilylethanol with excellent yield and product e.e. The immobilized cells manifested a good operational stability under the above reaction conditions since they retained 70% of their catalytic activity after ten cycles of use.     

Membrane microreactor in biocatalytic transesterification of triolein for biodiesel production

Transesterification is a principal chemical reaction that occurs in biodiesel production. We developed a novel biocatalytic membrane microreactor (BMM) for continuous transesterification by utilizing an asymmetric membrane as an enzyme-carrier for immobilization. The BMM was developed by pressure driven filtration of lipase from Pseudomonas fluorescens, which is suitable for highly efficient biocatalytic transesterification. Lipase solution was allowed to permeate through an asymmetric membrane with NMWL 300 kDa composed of polyethersulfone. The performances of BMM were studied in biodiesel synthesis via transesterification of triolein with methanol. Transesterification was carried out by passing a solution of triolein and methanol through the asymmetric membrane. The degree of triolein conversion using this microreactor was ca. 80% with a reaction time of 19 min. The BMM system displayed good stability, with no activity decay over a period of 12 day with continuous operation. Results from triolein transesterification clearly demonstrate the potential of an asymmetric membrane as an enzyme carrier material. Enzyme activity (mmol/h·g_lipase) was approximately 3 fold higher than that of native free lipase.     

Protease-catalysed coupling of N-protected amino acids and peptides with 4-aminoantipyrine

The enzymatic synthesis of N-protected l-aminoacyl- and l-peptidyl-antipyrine amides was accomplished by proteases from different classes. Serine and cysteine proteases proved to be suitable tools for the production of amino acids and peptides conjugated to 4-aminoantipyrine, whereas metalloproteases do not seem to be very qualified for accepting this nucleophile. The product yields were optimised by applying ample opportunities of medium engineering, e.g. aqueous-organic, biphasic, suspension and solid-to-solid reaction systems. Thus, yields up to 100% could be obtained. The products were purified and characterised by polarimetry and NMR spectroscopy. These results broaden the common knowledge of the catalytic potential of proteases, in particular with regard to the suitability of a special heterocyclic 1,2-amino ketone as a nucleophile for the biocatalytic amidation of amino acids and peptides.     

Production of uridine 5′-monophosphate by Corynebacterium ammoniagenes ATCC 6872 using a statistically improved biocatalytic process

Attempts were made with success to develop a two-step biocatalytic process for uridine 5′-monophosphate (UMP) production from orotic acid by Corynebacterium ammoniagenes ATCC 6872: the strain was first cultivated in a high salt mineral medium, and then cells were harvested and used as the catalyst in the UMP production reaction. Effects of cultivation and reaction conditions on UMP production were investigated. The cells exhibited the highest biocatalytic ability when cultivated in a medium containing corn steep liquor at pH 7.0 for 15 h in the exponential phase of growth. To optimize the reaction, both “one-factor-at-a-time” method and statistical method were performed. By “one-factor-at-a-time” optimization, orotic acid, glucose, phosphate ion (equimolar KH₂PO₄ and K₂HPO₄), MgCl₂, Triton X-100 were shown to be the optimum components for the biocatalytic reaction. Phosphate ion and C. ammoniagenes cell were furthermore demonstrated as the most important main effects on UMP production by Plackett–Burman design, indicating that 5-phosphoribosyl-1-pyrophosphate (PRPP) synthesis was the rate-limiting step for pyrimidine nucleotides production. Optimization by a central composition design (CCD) was then performed, and up to 32 mM (10.4 g l⁻¹) UMP was accumulated in 24 h from 38.5 mM (6 g l⁻¹) orotic acid. The yield was threefold higher than the original UMP yield before optimization.     

High-yield synthesis of wax esters catalysed by modified <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase

Candida rugosa lipase (CRL) was applied in a non-solvent esterification reaction to yield twelve wax esters. All products were obtained in nearly 100% yield for 10 h at 50°C when immobilized PEG₂₀₀₀-activated C. rugosa lipase was added to the reaction mixture. The surfactant had also a beneficial effect on the stability of the biocatalytic preparation with 83% of its activity conserved after the seventh run of repeated batch reactions.     

Substrate interaction with recombinant amidase from Pseudomonas aeruginosa during biocatalysis

The interaction of a variety of substrates with Pseudomonas aeruginosa native amidase (E.C. 3.5.1.4), overproduced in an Escherichia coli strain, was investigated using difference FTIR spectroscopy. The amides used as substrates showed an increase in hydrogen bonding upon association in multimers, which was not seen with esters. Evidence for an overall reduction or weakening of hydrogen bonding while amide and ester substrates are interacting with the enzyme is presented. The results describe a spectroscopic approach for analysis of substrate–amidase interaction and in situ monitoring of the hydrolysis and transferase reaction when amides or esters are used as substrates.     

Development of an aminotransferase-driven biocatalytic cascade for deracemization of d,l-phosphinothricin

2-oxo-4-[(hydroxy)(methyl)phosphinoyl]butyric acid (PPO) is the essential precursor keto acid for the asymmetric biosynthesis of herbicide l -phosphinothricin (l -PPT). Developing a biocatalytic cascade for PPO production with high efficiency and low cost is highly desired. Herein, a d -amino acid aminotransferase from Bacillus sp. YM-1 (Ym DAAT) with high activity (48.95 U/mg) and affinity (K_m = 27.49 mM) toward d -PPT was evaluated. To circumvent the inhibition of by-product d -glutamate (d -Glu), an amino acceptor (α-ketoglutarate) regeneration cascade was constructed as a recombinant Escherichia coli (E. coli D), by coupling Ym d -AAT, d -aspartate oxidase from Thermomyces dupontii (TdDDO) and catalase from Geobacillus sp. CHB1. Moreover, the regulation of the ribosome binding site was employed to overcome the limiting step of expression toxic protein TdDDO in E. coli BL21(DE3). The aminotransferase-driven whole-cell biocatalytic cascade (E. coli D) showed superior catalytic efficiency for the synthesis of PPO from d ,l -phosphinothricin (d ,l -PPT). It revealed the production of PPO exhibited high space–time yield (2.59 g L⁻¹ h⁻¹) with complete conversion of d -PPT to PPO at high substrate concentration (600 mM d ,l -PPT) in 1.5 L reaction system. This study first provides the synthesis of PPO from d ,l -PPT employing an aminotransferase-driven biocatalytic cascade.     

Modular and scalable biocatalytic tools for practical safety,health and environmental improvements in the production of speciality chemicals

Biocatalytic tools for both end-of-the-pipe solutions and direct reaction methodology have been developed for the improvement of practical oxidations. The identification of bottlenecks and limitations in biocatalytic Baeyer-Villiger oxidations, and the comparison of scalable process designs to overcome these limitations, have shown the direction for improvements. The first kilogram-scale asymmetric microbial Baeyer-Villiger oxidation with optimized productivity has been realized by the combination of a resin-based in-situ SFPR strategy together with micro-bubble aeration. Regioselective asymmetric dihydroxylation of aromatic nitriles has been achieved by recombinant chlorobenzenedioxygenase. The introduction of novel biocatalytic tools for key catalytic asymmetric transformations will change chemical manufacturing in the 21st century.     

Lipase-catalyzed synthesis of medium- and long-chain diesters of 2-oxoglutaric acid

Abstract

The influence of various reaction parameters, such as alcohol-to-substrate ratio, enzyme-to-substrate ratio, solvent and temperature, on the enzymatic preparation of a series of novel medium- and long-chain esters of 2-oxoglutaric acid has been evaluated. Among the tested lipases, those from Candida antarctica and Carica papaya appeared to be the best catalysts. Mild reaction conditions and low environmental impact make the biocatalytic procedure a convenient way to prepare the reported products, which are potential fat substitutes in the food industry.     

One-pot synthesis of polyunsaturated fatty acid amides with anti-proliferative properties

A one-pot environmentally friendly transamidation of ω-3 fatty acid ethyl esters to amides and mono- or diacylglycerols was investigated via the use of a polymer-supported lipase. The method was used to synthesize a library of fatty acid monoglyceryl esters and amides. These new derivatives were found to have potent growth inhibition effects against A549 lung cancer cells.     

Maillard Reaction Products Formed from d-Glucose and Glycine and the Formation Mechanisms of Amides as Major Components

Equimolar aqueous solutions of d-glucose and glycine were heated at 50°C and 95°C at pH 6.7. The headspace volatiles and the ether extracts from the reaction mixture were analyzed by gas chromatography and gas chromatography-mass spectrometry, using a fused silica capillary column. The major components formed were identified as diacetyl, furfuryl alcohol, two pyrroles, one pyranone and two amides. In order to elucidate the formation mechanisms of the amides formed from amino-carbonyl reactions, two model systems were adopted. N-Butylacetamide and N-butylformamide were formed as major components from diacetyl-butylamine and glyoxalbutylamine systems, respectively. The results obtained suggest that such α-dicarbonyls as 3-deoxyosone, 1-deoxy-d-erythro-2,3-hexodiulose and diacetyl generated in the amino-carbonyl reaction react with amino compounds, amides then being formed by cleavage of the C-C bond in the a-dicarbonyls.     

Kinetic characterization of carboxypeptidase-Y-catalyzed peptide semisynthesis Prediction of yields

Summary Carboxypeptidase-Y-catalyzed peptide semisynthesis has been characterized at pH 7.5, 25°C from initial rate steady state kinetic and progress reaction studies of hydrolysis and aminolysis of-N-benzoyl-L-tyrosine 4-nitro-anilide using the natural L-amino acids and their amides as nucleophiles. The reaction mechanism previously shown to account for carboxypeptidase-Y-catalyzed aminolysis reactions (Christensen et al., 1992) was found also to account for all of the reactions studied here. It involves in addition to the classical serine proteinase mechanism: i) complex formation between the free enzyme and the nucleophile, an interaction characterized by the competitive inhibition constant,K _i, and ii) reaction of the nucleophile with the acylated enzyme forming a complex of enzyme and aminolysis product, characterized by the aminolysis kinetic parameter,K _N.A competitive inhibitory effect showing binding to the free enzyme is seen mainly with large hydrophobic amino acids and their amides i.e. the same residues as those preferred on either side of the scissile bond in carboxypeptidase-Y substrates. The stoichiometry of the inhibition is 1 : 1 and the actual binding position most likely is that of the leaving group of substrates,S ₁.Aminolysis effects are obtained with a wide range of amino acids and amino acid amides, exceptions are Pro and, probably due to their low solubility, Tyr, Trp, Asp and Glu. TheK _N-values show relatively little dependence on the chemical nature of the side groups, but a marked difference between the amino acid and its amide. The amides interact more strongly. The kinetic parameter,k _c/K_m, of the hydrolysis of the aminolysis products is another important factor in peptide semisynthesis. Thek _c/K_m-values obtained of the amidated aminolysis products are much less than those of the products formed with free amino acids. All in all this leads to rather efficient aminolysis with the L-amino acid amides and poor aminolysis with the L-amino acids.Abbreviations BzTyrNHPhNO₂ -N-benzoyl-L-tyrosinyl 4-nitro-aniline - Xaa L-amino acids - Xaaa L-amino acid amides - Z-Phe Carbobenzoxy-L-phenylalanine - Z-Met Carbobenzoxy-L-methionine - BzTyr -N-benzoyl-L-tyrosine - AlaVal L-alanyl-L-valine - ValAla L-valyl-L-alanine     

Enzymatic synthesis of chiral amino‐alcohols by coupling transketolase and transaminase‐catalyzed reactions in a cascading continuous‐flow microreactor system

Rapid biocatalytic process development and intensification continues to be challenging with currently available methods. Chiral amino‐alcohols are of particular interest as they represent key industrial synthons for the production of complex molecules and optically pure pharmaceuticals. (2S,3R)‐2‐amino‐1,3,4‐butanetriol (ABT), a building block for the synthesis of protease inhibitors and detoxifying agents, can be synthesized from simple, non‐chiral starting materials, by coupling a transketolase‐ and a transaminase‐catalyzed reaction. However, until today, full conversion has not been shown and, typically, long reaction times are reported, making process modifications and improvement challenging. In this contribution, we present a novel microreactor‐based approach based on free enzymes, and we report for the first time full conversion of ABT in a coupled enzyme cascade for both batch and continuous‐flow systems. Using the compartmentalization of the reactions afforded by the microreactor cascade, we overcame inhibitory effects, increased the activity per unit volume, and optimized individual reaction conditions. The transketolase‐catalyzed reaction was completed in under 10 min with a volumetric activity of 3.25 U ml^?1. Following optimization of the transaminase‐catalyzed reaction, a volumetric activity of 10.8 U ml^?1 was attained which led to full conversion of the coupled reaction in 2 hr. The presented approach illustrates how continuous‐flow microreactors can be applied for the design and optimization of biocatalytic processes.

     

High-yielding cascade enzymatic synthesis of 5-methyluridine using a novel combination of nucleoside phosphorylases

Abstract

A novel combination of Bacillus halodurans purine nucleoside phosphorylase (BhPNP1) and Escherichia coli uridine phosphorylase (EcUP) has been applied to a dual-enzyme, sequential, biocatalytic one-pot synthesis of 5-methyluridine from guanosine and thymine. A 5-methyluridine yield of >79% on guanosine was achieved in a reaction slurry at a 53 mM (1.5% w/w) guanosine concentration. 5-Methyluridine is an intermediate in synthetic routes to thymidine and the antiretroviral drugs zidovudine and stavudine.     

Enzyme-catalysed deprotection of N-acetyl and N-formyl amino acids

To investigate the full potential of hydrolases for the removal of two amine-protecting groups, 15 different, commercially available lipases, acylases, proteases and esterases were studied for the hydrolyses of N-acetyl and N-formyl protecting groups. In addition to the well-known acylases from porcine kidney and Aspergillus melleus, this screening revealed that porcine liver esterase and the lipases from Rhizomucor miehei and Pseudomonas stutzeri are also catalysts for the hydrolysis of N-acetylalanine. The activity of lipases in this reaction was unexpected, since lipases are commonly believed not to hydrolyse amides. In addition, from these 15 enzymes, three were found to be active in the hydrolysis of N-formylalanine, i.e. porcine liver esterase and the two acylases. This is the first example where esterase is employed to deprotect N-formyl amides.     

Biocatalytic Knoevenagel reaction using alkaline protease from Bacillus licheniformis

Abstract

BLAP (alkaline protease from Bacillus licheniformis) was used as a biocatalyst in the Knoevenagel condensations of aromatic, hetero-aromatic and α;β-unsaturated aldehydes with less reactive acetylacetone or ethyl acetoacetate. The reactions were performed in organic solvent in the presence of water. The functionalized trisubstituted alkenes and α,β,γ,δ-unsaturated carbonyl compounds could be obtained in moderate to good yields with E/Z selectivities up to >99:1. This biocatalytic reaction provided an alternative pathway for Knoevenagel condensation, which also demonstrates a novel case of unnatural activity of existing enzymes.