Superwetting Monolithic Hollow‐Carbon‐Nanotubes Aerogels with Hierarchically Nanoporous Structure for Efficient Solar Steam Generation

Solar steam generation has been proven to be one of the most efficient approaches for harvesting solar energy for diverse applications such as distillation, desalination, and production of freshwater. Here, the synthesis of monolithic carbon aerogels by facile carbonization of conjugated microporous polymer nanotubes as efficient solar steam generators is reported. The monolithic carbon‐aerogel networks consist of randomly aggregated hollow‐carbon‐nanotubes (HCNTs) with 100–250 nm in diameter and a length of up to several micrometers to form a hierarchically nanoporous network structure. Treatment of the HCNTs aerogels with an ammonium peroxydisulfate/sulfuric acid solution endows their superhydrophilic wettability which is beneficial for rapid transportation of water molecules. In combination with their abundant porosity (92%) with open channel structure, low apparent density (57 mg cm^?3), high specific surface area (826 m² g^?1), low thermal conductivity (0.192 W m^?1 K^?1), and broad light absorption (99%), an exceptionally high conversion efficiency of 86.8% is achieved under 1 sun irradiation, showing great potential as an efficient photothermal material for solar steam generation. The findings may provide a new opportunity for tailored design and creation of new carbon‐aerogels‐based photothermal materials with adjustable structure, tunable porosity, simple fabrication process, and high solar energy conversion efficiency for solar steam generation.     

北京市主要建筑保温材料生命周期与环境经济效益评价

在低碳、绿色、环保、生态成为当代城市文明的主题下,建筑保温材料作为建筑节能最主要的解决途径之一备受关注,以北京市75%节能6层模拟住宅为例,利用DeST-h软件计算得出其墙体传热系数K值为0.40 W m-2K-1,节约电量42.31 kW h-1m-2,通过计算可节约标煤17.09 kg/m2,减少CO2排放量42.19 kg/m2,减少SO2排放量1.27 kg/m2,减少NOx排放量0.635 kg/m2,减少煤粉尘排放量11.5 kg/m2,减少煤烟尘排放5.75 kg/m2,环境效益36.66元/m2。并利用生命周期原理进行简化计算出4种常见保温材料岩棉、XPS、EPS和聚氨酯的50a建筑寿命周期中的总能耗分别为6.55×106、6.63×106、6.58×106、6.77×106kJ/m2,其中不同阶段能耗所占的比例从大到小依次为运行能耗生产能耗运输能耗。保温材料资金回收年限、环境效益回收年限和能耗回收年限的大小顺序:聚氨酯XPS≈EPS岩棉,三者顺序基本一致。并对建筑外墙保温材料科学评价与发展趋势进行探讨。     

High‐Performance Solar Steam Device with Layered Channels: Artificial Tree with a Reversed Design

Solar steam generation, combining the most abundant resources of solar energy and unpurified water, has been regarded as one of the most promising techniques for water purification. Here, an artificial tree with a reverse‐tree design is demonstrated as a cost‐effective, scalable yet highly efficient steam‐generation device. The reverse‐tree design implies that the wood is placed on the water with the tree‐growth direction parallel to the water surface; accordingly, water is transported in a direction perpendicular to what occurs in natural tree. The artificial tree is fabricated by cutting the natural tree along the longitudinal direction followed by surface carbonization (called as C‐L‐Wood). The nature‐made 3D interconnected micro‐/nanochannels enable efficient water transpiration, while the layered channels block the heat effectively. A much lower thermal conductivity (0.11 W m^?1 K^?1) thus can be achieved, only 1/3 of that of the horizontally cut wood. Meanwhile, the carbonized surface can absorb almost all the incident light. The simultaneous optimizations of water transpiration, thermal management, and light absorption results in a high efficiency of 89% at 10 kW m^?2, among the highest values in literature. Such wood‐based high‐performance, cost‐effective, scalable steam‐generation device can provide an attractive solution to the pressing global clean water shortage problem.     

Polarization Orientation,Piezoelectricity, and Energy Harvesting Performance of Ferroelectric PVDF‐TrFE Nanotubes Synthesized by Nanoconfinement

1D nanostructures of soft ferroelectric materials exert promising potential in the fields of energy harvesting and flexible and printed nanoelectronics. Here, improved piezoelectric properties, energy‐harvesting performance, lower coercive fields, and the polarization orientation of poly(vinylidene fluoride–trifluoroethylene) (PVDF‐TrFE) nanotubes synthesized with nanoconfinement effect are reported. X‐ray diffraction (XRD) patterns of the nanotubes show the peak corresponding to the planes of (110)/(200), which is a signature of ferroelectric beta phase formation. Piezoforce spectroscopy measurements on the free‐standing horizontal nanotubes bundles reveal that the effective polarization direction is oriented at an inclination to the long axis of the nanotubes. The nanotubes exhibit a coercive field of 18.6 MV m^?1 along the long axis and 40 MV m^?1 (13.2 MV m^?1 considering the air gap) in a direction perpendicular to the long axis, which is lower than the film counterpart of 50 MV m^?1. The poled 200 nm nanotubes, with 40% reduction in poling field, give larger piezoelectric d₃₃ coefficient values of 44 pm V^?1, compared to poled films (≈20 pm V^?1). The ferroelectric nanotubes deliver superior energy harvesting performance with an output voltage of ≈4.8 V and power of 2.2 μW cm^?2, under a dynamic compression pressure of 0.075 MPa at 1 Hz.     

High Thermoelectric zT in n‐Type Silver Selenide films at Room Temperature

In this work, a zT value as high as 1.2 at room temperature for n‐type Ag₂Se films is reported grown by pulsed hybrid reactive magnetron sputtering (PHRMS). PHRMS is a novel technique developed in the lab that allows to grow film of selenides with different compositions in a few minutes with great quality. The improved zT value reported for room temperature results from the combination of the high power factors, similar to the best values reported for bulk Ag₂Se (2440 ± 192 µW m^?1 K^?2), along with a reduced thermoelectric conductivity as low as 0.64 ± 0.1 W m^?1 K^?1. The maximum power factor for these films is of 4655 ± 407 µW m^?1 K^?2 at 103 °C. This material shows promise to work for room temperature applications. Obtaining high zT or, in other words, high power factor and low thermal conductivity values close to room temperature for thin films is of high importance to develop a new generation of wearable devices based on thermoelectric heat recovery.     

Conductive,Solution‐Processed Dioxythiophene Copolymers for Thermoelectric and Transparent Electrode Applications

Conjugated polymers with high electrical conductivities are attractive for applications in capacitors, biosensors, organic thermoelectrics, and transparent electrodes. Here, a series of solution processable dioxythiophene copolymers based on 3,4‐propylenedioxythiophene (ProDOT) and 3,4‐ethylenedioxythiophene (EDOT) is investigated as thermoelectric and transparent electrode materials. Through structural manipulation of the polymer repeat unit, the conductivity of the polymers upon oxidative solution doping is tuned from 1 × 10^?3 to 3 S cm^?1, with a polymer consisting of a solubilizing alkylated ProDOT unit and an electron‐rich biEDOT unit (referred to as PE₂) showing the highest electrical conductivity. Optimization of the film casting method and screening of dopants result in AgPF₆‐doped PE₂ achieving a high electrical conductivity of over 250 S cm^?1 and a thermoelectric power factor of 7 μW m^?1 K^?2. Oxidized spray cast films of PE₂ are also assessed as a transparent electrode material for use with another electrochromic polymer. This bilayer shows reversible electrochemical switching from a colored charge‐neutral state to a highly transmissive color‐neutral, oxidized state. These results demonstrate that dioxythiophene‐based copolymers are a promising class of materials, with ProDOT–biEDOT serving as a soluble analog to the well‐studied PEDOT as a p‐type thermoelectric and electrode material.     

Optimizations of Pulsed Plated p and n‐type Bi2Te3‐Based Ternary Compounds by Annealing in Different Ambient Atmospheres

This work presents a comprehensive study of the fabrication and optimization of electrodeposited p‐ and n‐type thermoelectric films. The films are deposited on Au and stainless steel substrates over a wide range of deposition potentials. The influence of the preparative parameters such as the composition of the electrolyte bath and the deposition potential are investigated. Furthermore, the p‐doped (Bi_xSb_1‐x)₂Te₃ and the n‐doped Bi₂(Te_xSe_1‐x)₃ films are annealed for a period of about 1 h under helium and under tellurium atmosphere at 250 °C for 60h. Annealing in He already leads to significant improvements in the thermoelectric performance. Furthermore, due to the equilibrium conditions during the process, annealing in Te atmosphere leads to a strongly improved film composition, charge carrier density and mobility. The Seebeck coefficients increase to values up to +182 μV K^?1 for p‐doped and–130 μV K^?1 for n‐doped materials at room temperature. The power factors also exhibit improvements with 1320 μW m^?1 K^?2 and 820 μW m^?1 K^?2 for p‐doped and n‐doped films, respectively. Additionally, in‐situ XRD measurements performed during annealing of the films up to 600K under He atmosphere show stepwise improvements of the crystal structure leading to the improvements in thermoelectric parameters. The thermal conductivity is between 1.2 W m^?1 K^?1 and 1.0 W m^?1 K^?1.     

Flexible Quasi‐Solid State Ionogels with Remarkable Seebeck Coefficient and High Thermoelectric Properties

Thermoelectric materials can be used to harvest low‐grade heat that is otherwise dissipated to the environment. But the conventional thermoelectric materials that are semiconductors or semimetals, usually exhibit a Seebeck coefficient of much less than 1 mV K^?1. They are expensive and consist of toxic elements as well. Here, it is demonstrated environmental benign flexible quasi‐solid state ionogels with giant Seebeck coefficient and ultrahigh thermoelectric properties. The ionogels made of ionic liquids and poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) can exhibit a giant Seebeck coefficient up to 26.1 mV K^?1, the highest for electronic and ionic conductors. In addition, they have a high ionic conductivity of 6.7 mS cm^?1 and a low thermal conductivity of 0.176 W m^?1 K^?1. Their thermoelectric figure of merit (ZT) is thus 0.75. The giant Seebeck coefficient is related to the ion‐dipole interaction between PVDF‐HFP and ionic liquids. Their application in ionic thermoelectric capacitors is also demonstrated for the conversion of intermittent heat into electricity. They are especially important to harvest the low‐grade thermal energy that is abundant on earth.     

Thermally Chargeable Solid‐State Supercapacitor

Ubiquitous low‐grade thermal energy, which is typically wasted without use, can be extremely valuable for continuously powering electronic devices such as sensors and wearable electronics. A popular choice for waste heat recovery has been thermoelectric energy conversion, but small output voltage without energy‐storing capability necessitates additional components such as a voltage booster and a capacitor. Here, a novel method of simultaneously generating a large voltage from a temperature gradient and storing electrical energy without losing the benefit of solid‐state no‐moving part devices like conventional thermoelectrics is reported. Thermally driven ion diffusion is used to greatly increase the output voltage (8 mV K^?1) with polystyrene sulfonic acid (PSSH) film. Polyaniline‐coated electrodes containing graphene and carbon nanotube sandwich the PSSH film where thermally induced voltage‐enabled electrochemical reactions, resulting in a charging behavior without an external power supply. With a small temperature difference (5 K) possibly created over wearable energy harvesting devices, the thermally chargeable supercapacitor produce 38 mV with a large areal capacitance (1200 F m^?2). It is anticipated that the attempt with thermally driven ion diffusion behaviors initiates a new research direction in thermal energy harvesting.     

Highly Flexible and Transparent Polyionic‐Skin Triboelectric Nanogenerator for Biomechanical Motion Harvesting

The advances of flexible electronics have raised demand for power sources with adaptability, flexibility, and multifunctionalities. Triboelectric nanogenerators are promising replacements for traditional batteries. Here, a highly soft skin‐like, transparent, and easily adaptable biomechanical energy harvester, based on a hybrid elastomer and with a polyionic hydrogel as the electrification layer and current collector, is developed. By harvesting the energy in human motion, the device generates an open‐circuit voltage of 70 V, a short‐circuit current density of 30.2 mA m^?2, and a maximum power density of 2.79 W m^?2 in a single‐electrode working mode. Further, it is demonstrated that the device can deliver power under bending, curling or by simple tapping when attached to human skin. In addition, the optimal counterpart of the polyionic layer with highest electronegativity difference is selected from a series of contact electrification materials based on a two‐electrode working mode, where a flexible device with the matching counterparts is investigated. Serving as ionic conductor and electrification layer, this polyionic material shows promising application in future development of self‐powered flexible electronics.     

Wearable All‐Fabric‐Based Triboelectric Generator for Water Energy Harvesting

Realizing energy harvesting from water flow using triboelectric generators (TEGs) based on our daily wearable fabric or textile has practical significance. Challenges remain on methods to fabricate conformable TEGs that can be easily incorporated into waterproof textile, or directly harvest energy from water using hydrophobic textile. Herein, a wearable all‐fabric‐based TEG for water energy harvesting, with additional self‐cleaning and antifouling properties is reported for the first time. Hydrophobic cellulose oleoyl ester nanoparticles (HCOENPs) are prepared from microcrystalline cellulose, as a low‐cost and nontoxic coating material to achieve superhydrophobic coating on fabrics, including cotton, silk, flax, polyethylene terephthalate (PET), polyamide (nylon), and polyurethane. The resultant PET fabric‐based water‐TEG can generate an instantaneous output power density of 0.14 W m^?2 at a load resistance of 100 MΩ. An all‐fabric‐based dual‐mode TEG is further realized to harvest both the electrostatic energy and mechanical energy of water, achieving the maximum instantaneous output power density of 0.30 W m^?2. The HCOENPs‐coated fabric provides excellent breathability, washability, and environmentally friendly fabric‐based TEGs, making it a promising wearable self‐powered system.     

Significantly Enhanced Thermoelectric Properties of PEDOT:PSS Films through Sequential Post‐Treatments with Common Acids and Bases

Thermoelectric (TE) materials are important for the sustainable development because they enable the direct harvesting of low‐quality heat into electricity. Among them, conducting polymers have attracted great attention arising from their advantages, such as flexibility, nontoxicity, easy availability, and intrinsically low thermal conductivity. In this work, a novel and facile method is reported to significantly enhance the TE property of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films through sequential post‐treatments with common acids and bases. Compared with the as‐prepared PEDOT:PSS, both the Seebeck coefficients and electrical conductivities can be remarkably enhanced after the treatments. The oxidation level, which significantly impacts the TE property of the PEDOT:PSS films, can also be well tuned by controlling the experimental conditions during the base treatment. The optimal PEDOT:PSS films can have a Seebeck coefficient of 39.2 µV K^?1 and a conductivity of 2170 S cm^?1 at room temperature, and the corresponding power factor is 334 µW (m^?1 K^?2). The enhancement in the TE properties is attributed to the synergetic effect of high charge mobility by the acid treatment and the optimal oxidation level tuned by the base treatment.     

Highly Passivated n‐Type Colloidal Quantum Dots for Solution‐Processed Thermoelectric Generators with Large Output Voltage

Colloidal quantum dots (CQDs) are attractive materials for thermoelectric applications due to their simple and low‐cost processing; advantageously, they also offer low thermal conductivity and high Seebeck coefficient. To date, the majority of CQD thermoelectric films reported upon have been p‐type, while only a few reports are available on n‐type films. High‐performing n‐ and p‐type films are essential for thermoelectric generators (TEGs) with large output voltage and power. Here, high‐thermoelectric‐performance n‐type CQD films are reported and showcased in high‐performance all‐CQD TEGs. By engineering the electronic coupling in the films, a thorough removal of insulating ligands is achieved and this is combined with excellent surface trap passivation. This enables a high thermoelectric power factor of 24 µW m^?1 K^?2, superior to previously reported n‐type lead chalcogenide CQD films operating near room temperature (<1 µW m^?1 K^?2). As a result, an all‐CQD film TEG with a large output voltage of 0.25 V and a power density of 0.63 W m^?2 at ?T = 50 K is demonstrated, which represents an over fourfold enhancement to previously reported p‐type only CQD TEGs.     

Impacts of Intensive Management and Landscape Structure on Timber and Energy Wood Production and net CO2 Emissions from Energy Wood Use of Norway Spruce

The aim of this study was to analyze the effects of intensive management and forest landscape structure (in terms of age class distribution) on timber and energy wood production (m³?ha^?1), net present value (NPV, ? ha^?1) with implications on net CO₂ emissions (kg CO₂ MWh^?1 per energy unit) from energy wood use of Norway spruce grown on medium to fertile sites. This study employed simulations using a forest ecosystem model and the Emission Calculation Tool, considering in its analyses: timber (saw logs, pulp) and energy wood (small-sized stem wood and/or logging residuals for top part of stem, branches, and needles) from the first thinning and harvesting residuals and stumps from the final felling. At the stand level, both fertilization and high pre-commercial stand density clearly increased timber production and the amount of energy wood. Short rotation length (40 and 60?years) outputted, on average, the highest annual stem wood production (most fertile and medium fertile sites), the 60?year rotation also outputted the highest average annual net present value (NPV with interest rates of 1?C4%). On the other hand, even longer rotation lengths, up to 80 and 100?years, were needed to output the lowest net CO₂ emissions per year in energy wood use. At the landscape level, the largest productivity (both for timber and energy wood) was obtained using rotation lengths of 60 and 80?years with an initial forest landscape structure dominated by older mature stands (a right-skewed age-class distribution). If the rotation length was 120?years, the initial forest landscape dominated by young stands (a left-skewed age-class distribution) provided the highest productivity. However, the NPV with interest rate of 2% was, on average, the highest with a right-skewed distribution regardless of the rotation length. If the rotation length was 120?years, normal age class distribution provided, on average, the highest NPV. On the other hand, the lowest emissions (kg CO₂ MWh^?1a^?1) were obtained with the left-skewed age-class distribution using the rotation lengths of 60 and 80?years, and with the normal age-class distribution using the rotation length of 120?years. Altogether, the management regimes integrating both timber and energy wood production and using fertilization provided, on average, the lowest emissions over all management alternatives considered.     

Synergistically Optimizing Electrical and Thermal Transport Properties of BiCuSeO via a Dual‐Doping Approach

The layered oxyselenide BiCuSeO system is known as one of the high‐performance thermoelectric materials with intrinsically low thermal conductivity. By employing atomic, nano‐ to mesoscale structural optimizations, low thermal conductivity coupled with enhanced electrical transport properties can be readily achieved. Upon partial substitution of Bi³⁺ by Ca²⁺ and Pb²⁺, the thermal conductivity can be reduced to as low as 0.5 W m^?1 K^?1 at 873 K through dual‐atomic point‐defect scattering, while a high power factor of ≈1 × 10^?3 W cm^?1 K^?2 is realized over a broad temperature range from 300 to 873 K. The synergistically optimized power factor and intrinsically low thermal conductivity result in a high ZT value of ≈1.5 at 873 K for Bi_0.88Ca_0.06Pb_0.06CuSeO, a promising candidate for high‐temperature thermoelectric applications. It is envisioned that the all‐scale structural optimization is critical for optimizing the thermoelectricity of quaternary compounds.     

Realizing High Thermoelectric Performance in n‐Type Highly Distorted Sb‐Doped SnSe Microplates via Tuning High Electron Concentration and Inducing Intensive Crystal Defects

In this study, a record high figure of merit (ZT) of ≈1.1 at 773 K is reported in n‐type highly distorted Sb‐doped SnSe microplates via a facile solvothermal method. The pellets sintered from the Sb‐doped SnSe microplates show a high power factor of ≈2.4 µW cm^?1 K^?2 and an ultralow thermal conductivity of ≈0.17 W m^?1 K^?1 at 773 K, leading a record high ZT. Such a high power factor is attributed to a high electron concentration of 3.94 × 10¹⁹ cm^?3 via Sb‐enabled electron doping, and the ultralow thermal conductivity derives from the enhanced phonon scattering at intensive crystal defects, including severe lattice distortions, dislocations, and lattice bent, observed by detailed structural characterizations. This study fills in the gaps of fundamental doping mechanisms of Sb in SnSe system, and provides a new perspective to achieve high thermoelectric performance in n‐type polycrystalline SnSe.     

Kinetics and thermodynamics of catalysis and thermal inactivation of a novel α-amylase (Tp-AmyS) from Thermotoga petrophila

Abstract

This research is focussed on kinetic, thermodynamic and thermal inactivation of a novel thermostable recombinant α-amylase (Tp-AmyS) from Thermotoga petrophila. The amylase gene was cloned in pHIS-parallel1 expression vector and overexpressed in Escherichia coli. The steady-state kinetic parameters (V_max, K_m, k_cat and k_cat/K_m) for the hydrolysis of amylose (1.39?mg/min, 0.57?mg, 148.6?s^?1, 260.7), amylopectin (2.3?mg/min, 1.09?mg, 247.1?s^?1, 226.7), soluble starch (2.67?mg/min, 2.98?mg, 284.2?s^?1, 95.4) and raw starch (2.1?mg/min, 3.6?mg, 224.7?s^?1, 61.9) were determined. The activation energy (E_a), free energy (ΔG), enthalpy (ΔH) and entropy of activation (ΔS) at 98?°C were 42.9?kJ mol^?1, 74?kJ mol^?1, 39.9?kJ mol^?1 and ?92.3 J mol^?1 K^?1, respectively, for soluble starch hydrolysis. While ΔG of substrate binding (ΔG_E-S) and ΔG of transition state binding (ΔG_E-T) were 3.38 and ?14.1?kJ mol^?1, respectively. Whereas, EaD, Gibbs free energy (ΔG*), increase in the enthalpy (ΔH*) and activation entropy (ΔS*) for activation of the unfolding of transition state were 108, 107, 105?kJ mol^?1 and ?4.1 J mol^?1 K^?1. The thermodynamics of irreversible thermal inactivation of Tp-AmyS revealed that at high temperature the process involves the aggregation of the protein.     

Outstanding Low Temperature Thermoelectric Power Factor from Completely Organic Thin Films Enabled by Multidimensional Conjugated Nanomaterials

In an effort to create a paintable/printable thermoelectric material, comprised exclusively of organic components, polyaniline (PANi), graphene, and double‐walled nanotube (DWNT) are alternately deposited from aqueous solutions using the layer‐by‐layer assembly technique. Graphene and DWNT are stabilized with an intrinsically conductive polymer, poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). An 80 quadlayer thin film (≈1 μm thick), comprised of a PANi/graphene‐PEDOT:PSS/PANi/DWNT‐PEDOT:PSS repeating sequence, exhibits unprecedented electrical conductivity (σ ≈ 1.9 × 10⁵ S m^?1) and Seebeck coefficient (S ≈ 120 μV K^?1) for a completely organic material. These two values yield a thermoelectric power factor (PF = S ² σ ^?1) of 2710 μW m^?1 K^?2, which is the highest value ever reported for a completely organic material and among the highest for any material measured at room temperature. These outstanding properties are attributed to the highly ordered structure in the multilayer assembly. This water‐based thermoelectric nanocomposite is competitive with the best inorganic semiconductors (e.g., bismuth telluride) at room temperature and can be applied as a coating to any flexible surface (e.g., fibers in clothing). For the first time, there is a real opportunity to harness waste heat from unconventional sources, such as body heat, to power devices in an environmentally‐friendly way.     

High Thermoelectric Performance in p‐type Polycrystalline Cd‐doped SnSe Achieved by a Combination of Cation Vacancies and Localized Lattice Engineering

Herein, a high figure of merit (ZT) of ≈1.7 at 823 K is reported in p‐type polycrystalline Cd‐doped SnSe by combining cation vacancies and localized‐lattice engineering. It is observed that the introduction of Cd atoms in SnSe lattice induce Sn vacancies, which act as p‐type dopants. A combination of facile solvothermal synthesis and fast spark plasma sintering technique boosts the Sn vacancy to a high level of ≈2.9%, which results in an optimum hole concentration of ≈2.6 × 10¹⁹ cm^?3 and an improved power factor of ≈6.9 µW cm^?1 K^?2. Simultaneously, a low thermal conductivity of ≈0.33 W m^?1 K^?1 is achieved by effective phonon scattering at localized crystal imperfections, as observed by detailed structural characterizations. Density functional theory calculations reveal that the role of Cd atoms in the SnSe lattice is to reduce the formation energy of Sn vacancies, which in turn lower the Fermi level down into the valence bands, generating holes. This work explores the fundamental Cd‐doping mechanisms at the nanoscale in a SnSe matrix and demonstrates vacancy and localized‐lattice engineering as an effective approach to boosting thermoelectric performance. The work provides an avenue in achieving high‐performance thermoelectric properties of materials.     

Temperature‐controlled down‐conversion luminescence behavior of Eu3+‐doped transparent MF2 (M = Ba,Ca, Sr) glass ceramics

Eu³⁺‐doped transparent glass ceramics containing MF₂ (M = Ba, Ca, Sr) nanocrystals were fabricated using a melt–quenching method, and the resulting structures were studied using X‐ray diffraction. Levels ⁵D₁ and ⁵D₀ of Eu³⁺ ions were verified as thermally coupled levels using the fluorescence intensity ratio method. The fluorescence intensity ratios, optical temperature sensitivity and thermal quenching ratios of the transparent glass ceramics were studied as a function of temperature. With an increase in temperature, the relative sensitivity (S _R) decreased sharply at first, then slowly increased, before finally decreasing. The minimum S _R values of GCBaF₂ (GCB), GCCaF₂ (GCC) and GCSrF₂ (GCS) were 2.8 × 10^?4, 0.8 × 10^?4 and 1.9 × 10^?4 K^?1 at 360, 269 and 319 K, respectively. Glass ceramics with an intense emission intensity can be used to convert the measured spectrum into temperature and may have an important role in temperature detectors.