Relations between extraction protocols for activated sludge extracellular polymeric substances (EPS) and complexation properties of Pb and Cd with EPS: Part II. Consequences of EPS extraction methods on Pb2+ and Cd2+ complexation

To study the effect of extraction protocols on extracellular polymeric substances (EPS) metal binding ability, EPS from two activated sludges were extracted by eight extraction protocols: three chemical treatments, four physical treatments and a control. Two pK_a, for each EPS, were determined: pK_a1 may be specific for carboxyl and phosphoric and pK_a2 may be attributed to phenolic and amino functional groups according to EPS composition and IR spectra. EPS pK_a values could be affected by the presence of extraction reagents and/or the modifications of EPS by extraction reagents.Complexation study performed at pH 7 by a polarographic method has always showed a greater affinity of EPS for Pb²⁺ than for Cd²⁺. The complexation properties of EPS extracted by chemical methods were greatly modified. Concerning EPS extracted by physical methods, their complexation properties were close except for EPS obtained by heating. Standardized extraction methods must be established as a function of the aims of the EPS study.     

Extraction of extracellular polymeric substances (EPS) from anaerobic granular sludges: comparison of chemical and physical extraction protocols

The characteristics of the extracellular polymeric substances (EPS) extracted with nine different extraction protocols from four different types of anaerobic granular sludge were studied. The efficiency of four physical (sonication, heating, cationic exchange resin (CER), and CER associated with sonication) and four chemical (ethylenediaminetetraacetic acid, ethanol, formaldehyde combined with heating, or NaOH) EPS extraction methods was compared to a control extraction protocols (i.e., centrifugation). The nucleic acid content and the protein/polysaccharide ratio of the EPS extracted show that the extraction does not induce abnormal cellular lysis. Chemical extraction protocols give the highest EPS extraction yields (calculated by the mass ratio between sludges and EPS dry weight (DW)). Infrared analyses as well as an extraction yield over 100% or organic carbon content over 1 g g⁻¹ of DW revealed, nevertheless, a carry-over of the chemical extractants into the EPS extracts. The EPS of the anaerobic granular sludges investigated are predominantly composed of humic-like substances, proteins, and polysaccharides. The EPS content in each biochemical compound varies depending on the sludge type and extraction technique used. Some extraction techniques lead to a slightly preferential extraction of some EPS compounds, e.g., CER gives a higher protein yield.     

Hydrophobic features of EPS extracted from anaerobic granular sludge: an investigation based on DAX-8 resin fractionation and size exclusion chromatography

The hydrophobic fractionation of extracellular polymeric substances (EPS) extracted from anaerobic granular sludge was performed on the DAX-8 resin (two elution pH conditions, i.e., pH 2 and pH 5 were tested). The impact of seven different EPS extraction methods on EPS hydrophobicity features was assessed. The results showed that the extraction methods and bulk solution pH influenced dramatically the biochemical composition of the EPS, and in turn, the hydrophobicity determined. Besides, EPS extracting reagents i.e., formaldehyde, ethanol, sodium dodecyl sulfate (SDS), and Tween 20 not only introduced extra carbon content in the total organic carbon (TOC) measurement but also interacted with the DAX-8 resin. By comparing the apparent molecular weight (aMW) distribution of untreated and pH-adjusted EPS samples, more complete EPS aMW information was preserved at pH 5. Thus, elution at pH 5 was preferred in this study for the qualitative analysis of EPS hydrophobic features. The hydrophobic fraction of EPS retained by the resin at pH 5 was ascribed to a wide aMW range, ranging from >440 to 0.3 kDa. Within this range, EPS molecules ranging from 175 to 31 kDa were mostly retained by the DAX-8 resin, which indicates that these EPS molecules are highly hydrophobic.

     

Production of a new exopolysaccharide (EPS) by Pseudomonas oleovorans NRRL B-14682 grown on glycerol

Pure glycerol and glycerol-rich product (GRP) obtained from the biodiesel industries were used as carbon source for the production of a new extracellular polysaccharide (EPS) by Pseudomonas oleovorans NRRL B-14682. The influence of temperature (20–40 °C) and pH (6.0–8.0) was studied. A temperature of 30 °C and pH control at 6.8 gave the maximum cell growth and EPS production. The culture attained a maximum cell dry weight (CDW) of 9.55 g l⁻¹ and an EPS concentration of 11.82 g l⁻¹ when cultivated with pure glycerol. GRP was a suitable carbon source, as shown by the slightly higher EPS concentration (12.18 g l⁻¹). The EPS productivity obtained with GRP (3.85 g l⁻¹ d⁻¹) was almost twice that obtained with pure glycerol (2.00 g l⁻¹ d⁻¹). Also, the yield on glycerol was higher for the cultivation with GRP (0.36 g g⁻¹) than for pure glycerol (0.28 g g⁻¹). The EPS was a high molecular weight heteropolysaccharide, composed by neutral sugars (37–80 wt% galactose, 2–30 wt% glucose, 0.5–25 wt% mannose and 0.5–20 wt% rhamnose) and containing acyl group substituents (pyruvil, acetyl and succinyl were identified). The EPS forms highly viscous aqueous dispersions with many potential commercial applications.     

Ultrasound complex enzymes assisted extraction and biochemical activities of polysaccharides from Epimedium leaves

Ultrasound complex enzymes (UCE) were used to extract crude polysaccharides (CEP) from Epimedium leaves. The response surface methodology (RSM) based on Box–Behnken Design (BBD) was employed to further optimize the extraction conditions. The optimum conditions were: complex enzyme dose of 50, 250, 200, 100 U/g (papain, pectase, cellulase and α-amylase), extraction temperature 46.8 °C, ultrasound time 42.3 min, pH 4.28, and ultrasound power 311 W. Under these conditions, the experimental yield of CEP was 5.98%, which was well matched with the value predicted by the model. Three major polysaccharide fractions (EP-1, EP-2 and EP-3) were obtained by ultrafiltration, chromatography on DEAE-Sepharose Fast Flow and Sephadex G-100 column. Their chemical–physical characteristics were investigated using chemical methods, gas chromatography (GC) and high-performance size-exclusion chromatography (HPSEC). Biochemical characterization of the polysaccharide fractions was evaluated on the basis of free radical scavenging, ferric-reducing antioxidant power (FRAP), lymphocyte proliferation, macrophage phagocytosis and NK cell activity assay in vitro. The results showed that all fractions contained higher galacturonic acid (GalA) and galactose (Gal), possessed considerable antioxidant activity, and could promote proliferation of splenic lymphocytes, activate macrophages and enhance NK cells’ activity. UCE as a more effective and environment-friendly technique could be employed for extracting active ingredients from plant materials, extensively applied in pharmaceutical and food industries.     

Effect of sulfate and iron on physico-chemical characteristics of anaerobic granular sludge

This research investigated the effect of the substrate composition (no substrate, glucose, glucose + sulfate or glucose + sulfate + iron) on the physico-chemical characteristics of two different anaerobic granular sludges as a function of time. The sludges were fed batch wise (pH 7, 30 °C) at an organic loading rate of 1.2 g COD l⁻¹ d⁻¹ (0.04 g COD g VSS⁻¹ day⁻¹) for 30 days. The presence of sulfate (COD/sulfate ratio = 1) in the feed of glucose fed anaerobic sludges did not change the physico-chemical characteristics throughout the incubation. In contrast, the presence of iron in the feed (in addition to glucose and sulfate, COD/iron ratio = 1) reduced the protein and carbohydrate content in the SMP and EPS with about 50% after 30 days incubation compared to the other feeding conditions. The sludge grown on glucose + sulfate + iron contained much more iron (+300–500%) and sulfur (+200–350%) than the other incubated sludges both after 14 and 30 days. The higher mineral content (lower VSS content) and the decrease of the EPS content contributed to the disintegration of iron fed granules, as shown by their lower size particles. However, the iron fed sludge displayed a higher granule strength than the other incubated sludges. Although an appreciable variation in the granule strength was noticed between the sludges investigated, it was not possible to relate these differences to their inorganic composition, the chemical composition of the extracted polymers or to the physical characteristics investigated.     

Comparisons of direct extraction methods of microbial DNA from different paddy soils

Molecular analyses for the study of soil microbial communities often depend on the direct extraction of DNA from soils. The present work compares the effectiveness of three different methods of extracting microbial DNA from seven different paddy soils. Comparison among different DNA extraction methods against different paddy soil samples revealed a marked variation in DNA yields from 3.18–20.17 μg DNA/g of dry soil. However, irrespective of the soil samples and extraction methods the DNA fragment size was >10 kb. Among the methods evaluated, method-C (chemical–enzymatic–mechanical) had better cell lysis efficiency and DNA yield. After purification of crude DNA by Purification Kit, A₂₆₀/A₂₃₀ and A₂₆₀/A₂₈₀ ratios of the DNA obtained by method-C reached up to 2.27 and 1.89, respectively, sustaining the efficacy of this technique in removing humic acid, protein and other contaminants. Results of the comprehensive evaluation of DNA extraction methods suggest that method-C is superior to other two methods (chemical–enzymatic and chemical–mechanical), and was the best choice for extraction of total DNA from soil samples. Since soil type and microbial community characteristics influence DNA recovery, this study provides guidance for choosing appropriate extraction and purification methods according to experimental goals.     

Extraction of extracellular polymeric substances (EPS) of sludges

The efficacies of extracting extracellular polymeric substances (EPS) from aerobic, acidogenic and methanogenic sludges using EDTA, cation exchange resin and formaldehyde under various conditions were compared. Results show that formaldehye plus NaOH was most effective in extracting EPS for all sludges; only 1.1-1.2% of DNA in the sludge samples were detected, suggesting the EPS extracted were not contaminated by intracellular substances. For each gram of volatile solids, formaldehyde-NaOH extracted 165, 179 and 102 mg of EPS from aerobic, acidogenic and methanogenic sludges, respectively. All EPS were mainly composed of carbohydrate, protein and humic substance, plus small quantities of uronic acid and DNA. Carbohydrate was predominant in the acidogenic sludge (62% in the EPS extracted by formaldehyde-NaOH), whereas protein was predominant in the methanogenic sludge (41%). Humic substance, which has often been overlooked, accounted for 30.6, 8.4 and 22.8% of the extracted EPS from aerobic, acidogenic and methanogenic sludges, respectively. However, judging from EPS quantities estimated from confocal laser scanning microscopic observations, formaldehyde-NaOH extracted only a limited portion of EPS. Optimization of extraction procedures and/or development of a more effective extraction method are warranted.     

Improvement of epothilone B production by in situ removal of ammonium using cation exchange resin in Sorangium cellulosum culture

A cation exchange resin was added at different stages in the growth of Sorangium cellulosum cultures to remove excess ammonium, which has a negative influence on the production of the anticancer agent, epothilone. When 8 g L⁻¹ of cation exchange resin were added at the mid-death phase, the ammonium removal reached 83% and the maximum production of epothilone was 14.3 mg L⁻¹, which was 2.6 times greater than that of the control culture.     

Characterization,feasibility and optimization of Agaricus subrufescens growth based on chemical elements on casing layer

The aim of this study was to analyze yields, biological efficiency, earliness (expressed as days to first harvest), and precociousness and establish models for the mushroom growing according to these parameters. The experiment followed a double factorial design with four sources of calcium (calcitic limestone, calcitic limestone + gypsum, dolomitic limestone and dolomitic limestone + gypsum) and 2 application times (25 days before casing and at the moment of casing), with 4 replicates for each treatment. Different calcium sources influenced differently Agaricus subrufescens production, especially as regards earliness, which showed significantly higher values when dolomitic limestone with gypsum was applied. Yield and biological efficiency were negatively correlated with H + AL, organic matter and Mg amount. Furthermore, earliness was positively correlated with H + Al, organic matter, and the amount of Mg and Fe. Finally, negative correlations were observed between precociousness and the amount of Ca, SB (sum of base), CEC (cation exchange capacity) and V% (percentage of base saturation). The models presented in this work are extremely important for predicting the agronomic performance of Agaricus subrufescens on the basis of chemical analysis provided by the casing soil.     

Magnetic molecularly imprinted polymers for improved extraction of tanshinones from herbs via integrated extraction and cleanup system

A novel separation technology at room temperature for traditional Chinese medicines was proposed in this work by adding magnetic molecularly imprinted polymers (M-MIPs) into extraction solution and sample matrix. The M-MIPs show a more adsorption capacities and higher selectivity for the template than magnetic non-molecularly imprinted polymers (M-NMIPs) without the specific binding sites. Addition of the M-MIPs to the extraction solution provides one-step extraction and cleanup, the improvement of extraction rate and extraction yields of three tanshinones (from 0.40, 0.23 and 0.12 mg g⁻¹ in 240 min by solvent extraction to 0.52, 0.27 and 0.19 mg g⁻¹ in 5 min by 200 mg sorbent), and reusability of extraction solvent. The extraction yields of three tanshinones by this technology at room temperature in 5 min were higher than those by ultrasonic extraction in 30 min, by heat reflux extraction in 45 min and by solvent extraction at room temperature in 4 h. The integrated technology has the advantages of one-step extraction and cleanup, high extraction efficiency, low solvent consumption and room temperature.     

Chlorination-mediated EPS excretion shapes early-stage biofilm formation in drinking water systems

Microbial surface adhesion to surfaces and subsequent biofilm establishment are ubiquitous in drinking water systems, which often contribute to deteriorated water quality. Disinfectants are common agents applied to drinking water controlling microbial propagation, yet the underlying mechanisms of how disinfectants function to regulate microbial activity and thereby biofilm development remains elusive. We experimentally studied the effects of chlorination on extracellular polymeric substance (EPS) production, and its impacts on early-stage biofilm formation in a model drinking water system. Results showed that low-level chlorine (≤ 1.0 mg/L) stimulated microbial EPS (especially of proteins) excretion that favored early-stage biofilm formation. Microbes experiencing higher chlorination (>1.0 mg/L) exhibited clearly suppressed growth associated with reduced EPS release, consequently yielding less biofilm formation. Removal of cell-attached proteins and polysaccharides diminished biofilm formation, which highlighted the critical role of EPS (especially protein components) in biofilm development. A negative correlation between chlorination-mediated microbial protein production and cell surface charge suggested that chlorine disinfection may modify cell surface properties through regulation of microbial EPS excretion and thereby mediate biofilm formation. With these quantitative estimations, this study provides novel insights into how chlorination-mediated EPS excretion shapes early-stage biofilm formation, which is essential for practical functioning of drinking water systems.     

The polybasic lysine-rich domain of plasma membrane-resident STIM1 is essential for the modulation of store-operated divalent cation entry by extracellular calcium

STIM1 acts as an endoplasmic reticulum Ca^2 + sensor that communicates the filling state of the intracellular stores to the store-operated channels. In addition, STIM1 is expressed in the plasma membrane, with the Ca^2 + binding EF-hand motif facing the extracellular medium; however, its role sensing extracellular Ca^2 + concentrations in store-operated Ca^2 + entry (SOCE), as well as the underlying mechanism remains unclear. Here we report that divalent cation entry stimulated by thapsigargin (TG) is attenuated by extracellular Ca^2 + in a concentration-dependent manner. Expression of the Ca^2 +-binding defective STIM1(D76A) mutant did not alter the surface expression of STIM1 but abolishes the regulation of divalent cation entry by extracellular Ca^2 +. Orai1 and TRPC1 have been shown to play a major role in SOCE. Expression of the STIM1(D76A) mutant did not alter Orai1 phosphoserine content. TRPC1 silencing significantly attenuated TG-induced Mn^2 + entry. Expression of the STIM1(K684,685E) mutant impaired the association of plasma membrane STIM1 with TRPC1, as well as the regulation of TG-induced divalent cation entry by extracellular Ca^2 +, which suggests that TRPC1 might be involved in the regulation of divalent cation entry by extracellular Ca^2 + mediated by plasma membrane-resident STIM1. Expression of the STIM1(D76A) or STIM1(K684,685E) mutants reduced store-operated divalent cation entry and resulted in loss of dependence on the extracellular Ca^2 + concentration, providing evidence for a functional role of plasma membrane-resident STIM1 in the regulation of store-operated divalent cation entry, which at least involves the EF-hand motif and the C-terminal polybasic lysine-rich domain.     

Alkali-aided protein extraction from chicken dark meat: Chemical and functional properties of recovered proteins

Alkali-aided extraction of proteins from chicken thigh meat has been attempted for improved utilization of this low value raw material. This study focused on chemical and functional properties of proteins recovered after extraction in alkaline conditions at pH values of 10.5, 11.0, 11.5 and 12.0. Solubility of total proteins was significantly reduced (P < 0.0001) for proteins extracted at higher pH (11.5 and 12.0) with a significant increase in protein hydrophobicity. Despite the lower protein solubility, protein recovery yield was found to be higher at pH values of 11.5 and 12.0. Reactive sulfhydryl content also significantly increased (P < 0.05) for these two treatments. Alkali treatments at pH 10.5 and 11.0 were found to have no effect on myofibrillar protein hydrophobicity which was found to be similar to that of raw meat protein, indicating that the proteins retained the native conformation. SDS-PAGE of extracted proteins showed greater amounts of myosin heavy chain relative to raw meat. Emulsification capacity showed relatively little change for samples with different extraction pH values, although it was significantly higher for pH 11.0. The foam expansion property of myofibrillar proteins increased significantly with extraction pH values, and obtained a maximum value at pH 11.5. The proteins extracted at pH 10.5 and 11.0, to some extent, could regain their original conformation after pH readjustment to 6.2. The functionality of the recovered protein suggests that this may provide an opportunity for greater utilization of dark poultry meat.     

Purification and characterization of a Na+/K+ dependent alginate lyase from turban shell gut Vibrio sp. YKW-34

An alginate lyase with high specific enzyme activity was purified from Vibrio sp. YKW-34, which was newly isolated from turban shell gut. The alginate lyase was purified by in order of ion exchange, hydrophobic and gel filtration chromatographies to homogeneity with a recovery of 7% and a fold of 25. This alginate lyase was composed of a single polypeptide chain with molecular mass of 60 kDa and isoelectric point of 5.5–5.7. The optimal pH and temperature for alginate lyase activity were pH 7.0 and 40 °C, respectively. The alginate lyase was stable over pH 7.0–10.0 and at temperature below 50 °C. The alginate lyase had substrate specificity for both poly-guluronate and poly-mannuronate units. The k_cat/K_m value for alginate (heterotype) was 1.7 × 10⁶ s⁻¹ M⁻¹. The enzyme activity was completely lost by dialysis and restored by addition of Na⁺ or K⁺. The optimal activity exhibited in 0.1 M of Na⁺ or K⁺. This enzyme was resistant to denaturing reagents (SDS and urea), reducing reagents (β-mercaptoethanol and DTT) and chelating reagents (EGTA and EDTA).     

EPS and SMP dynamics at different heights of a submerged anaerobic membrane bioreactor (SAMBR)

Membrane bioreactors (MBR) technology for wastewater offers many advantages over conventional technologies such as high effluent quality, less footprint and others. The main disadvantage of membrane bioreactors (MBR) is related to membrane fouling, which is mainly caused by extracellular polymeric substance (EPS) and soluble microbial products (SMP). This research studied EPS and SMP dynamics at different heights of a submerged anaerobic membrane bioreactor (SAMBR). The SAMBR was operated under two organic loading rates (OLR) (0.79 and 1.56 kg/m³ d) and was fed with synthetic wastewater with glucose as the carbon source. The results showed percentages of chemical oxygen demand (COD) removal above 95% and the highest COD removal rates were observed at the bottom of the reactor (>83%) for both OLR. The EPS showed a stratification with highest quantities in the supernatant. For the SMP the highest concentration was in the bottom of SAMBR where utilization predominated associated products whereas in the SAMBR supernatant predominated biomass associated products. The OLR change led to a significant increase in SMP accumulation but not in EPS. These facts showed that EPS and SMP dynamic in the SAMBR seemed to be mainly influenced by biological activity, total suspended solids concentration and substrate composition.     

Enzyme-assisted extraction of lycopene from tomato processing waste

A central composite design was used to optimize the enzyme-assisted extraction of lycopene from the peel fraction of tomato processing waste. Tomato skins were pretreated by a food-grade enzyme preparation with pectinolytic and cellulolytic activities and then subjected to hexane extraction. The factors investigated included extraction temperature (10–50 °C), pretreatment time (0.5–6.5 h), extraction time (0.5–4.5 h), enzyme solution-to-solid ratio (10–50 dm³/kg) and enzyme load (0–0.2 kg/kg). Overall, an 8- to 18-fold increase in lycopene recovery was observed compared to the untreated plant material. From a response surface analysis of the data, a second-degree polynomial equation was developed which provided the following optimal extraction conditions: T = 30 °C, extraction time = 3.18 h and enzyme load = 0.16 kg/kg. The obtained results strongly support the idea of using cell-wall degrading enzymes as an effective means for recovering lycopene from tomato waste.     

Hydrophilic interaction chromatography/tandem mass spectrometry for the determination of melamine in royal jelly and royal jelly lyophilized powder

Melamine has become the focus of attention for the possible occurrence of nephrolithiasis and associated deaths, because it was added to foods to increase the apparent protein content by unethical manufacturers. An analytical method based on hydrophilic interaction chromatography/tandem mass spectrometry (HILIC-MS/MS) was developed and validated for the determination of melamine in the royal jelly (RJ) and royal jelly lyophilized powder (RJLP). Trace of melamine was extracted from the RJ and RJLP by ultrasonic-assisted extraction followed by clean-up procedure using mixed-mode cation exchange (MCX) solid phase extraction and separated on a hydrophilic interaction chromatography (HILIC) analytical column with acetonitrile/5 mM ammonium acetate buffer (88:12, v/v) as mobile phase. Detection was carried out by positive electrospray ionization (ESI+) in multiple reaction monitoring (MRM) mode. The chromatographic separation was obtained within 5 min and was linear in the concentration range of 0.01–8 μg/mL in RJ and 0.05–10 μg/mL in RJLP for melamine. The mean extraction recoveries for melamine were ranged from 89.6 to 100.4%. Method validation parameters were evaluated such as linearity, selectivity, precision, carryover and recovery, giving results within the acceptable range. The proposed method was successfully applied to the quantitation of melamine in RJ and RJLP. This approach will be of particular utility for the evaluation of melamine residue level and routine monitor of melamine in RJ and RJLP samples.     

Relationship between the resistance to bile salts and low pH with exopolysaccharide (EPS) production of Bifidobacterium spp. isolated from infants feces and breast milk

The purpose of this study was to investigate a possible relation between resistance to bile salts and low pH with exopolysaccharide (EPS) producing of Bifidobacterium spp. In this study, a total of 31 Bifidobacterium spp. were isolated from breast fed infants feces and breast milk samples. As a result of the identification tests, isolates were identified as Bifidobacterium breve (15 strains), B. bifidum (11 strains), B. pseudocatenulatum (3 strains) and B. longum (2 strains). Bifidobacterium spp. were determined exopolysaccharide (EPS) production. EPS productions observed at chance rations (38.00–97.64 mg/l) among of Bifidobacterium spp. Furthermore, Bifidobacterium spp. were determined resistance to bile salts and low pH. Positive correlations between production of exopolysaccharide and resistance to bile salts (p < 0.01) or low pH (p < 0.01) were found Bifidobacterium spp. This investigation showed that high EPS production of Bifidobacteria may be important in the selection of probiotic strains for resistance to bile salts and low pH.     

Optimization of a rapid microwave-assisted extraction method for the simultaneous determination of opiates,cocaine and their metabolites in human hair

A rapid and cleanup-free microwave-assisted extraction (MAE) method is proposed for the simultaneous extraction of six illegal drugs of abuse – cocaine, benzoylecgonine (BZE), cocaethylene (CCE), morphine, 6-monoacethylmorphine (6AM) and codeine – from human hair samples. The analytes were determined using high performance liquid chromatography (HPLC) with photodiode array UV detection. The influence of several variables on the efficiency of the MAE procedure was investigated in detail by a multi-objective optimization approach based on a hybrid experimental design (17 experiments) and desirability functions. Six drugs were successfully extracted from human hair with recoveries close to 100% and good reproducibility (<3.6% RSD) under the optimal MAE conditions: 11 mL dichloromethane (DCM) extraction solvent, 60 °C extraction temperature, 9 min extraction time and 0.5 mL of methanol (MeOH) added to 50 mg of the hair sample in the extraction vessels. Limits of quantification of 0.2 ng mg^?1 were found for the studied compounds. A comparison of sample preparation procedures, including MAE, enzymatic digestion and digestion by aqueous acids, was also conducted. The results indicated that the global behaviour of sample procedures provided similar satisfactory recoveries ranging from 86 to 100%. Indeed, the MAE procedure resulted in a reduction of extraction time by 100-fold and the elimination of cleanup steps. Slightly higher recoveries of morphine, 6AM, BZE and CCE, at 1 ng mg^?1 concentration level and cocaine at 40 ng mg^?1 concentration level, were achieved using MAE. Lastly, the proposed MAE method was applied to several human hair samples from multidrug abusers.