The NMR solution structure of the pheromone Er-2 from the ciliated protozoan Euplotes raikovi.

The NMR structure of the pheromone Er-2 from the ciliated protozoan Euplotes raikovi has been determined in aqueous solution. The structure of this 40-residue protein was calculated with the distance geometry program DIANA from 621 distance constraints and 89 dihedral angle constraints; the program OPAL was employed for the energy minimization. For a group of 20 conformers used to characterize the solution structure, the average pairwise RMS deviation from the mean structure calculated for the backbone heavy atoms N, C alpha, and C' of residues 3-37 was 0.31 A. The molecular architecture is dominated by an up-down-up bundle of 3 short helices of residues 5-11, 14-20, and 23-33, which is similar to the structures of the homologous pheromones Er-1 and Er-10. Novel structural features include a well-defined N-cap on the first helix, a 1-residue deletion in the second helix resulting in the formation of a 3(10)-helix rather than an alpha-helix as found in Er-1 and Er-10, and the simultaneous presence of 2 different conformations for the C-terminal tetrapeptide segment, i.e., a major conformation with the Leu 39-Pro 40 peptide bond in the trans form and a minor conformation with this peptide bond in the cis form.     

The NMR solution structure of the pheromone Er-11 from the ciliated protozoan Euplotes raikovi.

The NMR solution structure of the pheromone Er-11, a 39-residue protein from the ciliated protozoan Euplotes raikovi, was calculated with the distance geometry program DIANA from 449 NOE upper distance constraints and 97 dihedral angle constraints, and the program OPAL was employed for structure refinement by molecular mechanics energy minimization in a water bath. For a group of 20 conformers used to characterize the solution structure, the average of the pairwise RMS deviations from the mean structure calculated for the backbone heavy atoms N, C alpha, and C' of residues 2-38 was 0.30 A. The molecular architecture is dominated by an up-down-up bundle of three short helices with residues 2-9, 12-19, and 22-32, which is closely similar to the previously determined structures of the homologous pheromones Er-1, Er-2, and Er-10. This finding provides structural evidence for the capability shown by these pheromones to compete with each other in binding reactions to their cell-surface receptors.     

NMR structure of the Euplotes raikovi pheromone Er-23 and identification of its five disulfide bonds.

The NMR solution structure of the 51 residue pheromone Er-23 from the ciliated protozoan Euplotes raikovi (Er) was calculated with the torsion angle dynamics program DYANA from 582 nuclear Overhauser enhancement (NOE) upper limit distance constraints, 46 dihedral angle constraints and 30 disulfide bond constraints. The disulfide bridges had not been assigned by chemical methods, and initially were assigned tentatively on the basis of inspection of the positioning of the Cys sulfhydryl groups in a bundle of 20 conformers that was calculated without disulfide bond constraints. The assignment of disulfide bridges was then validated by structure calculations that assessed the compatibility of plausible alternative Cys-Cys disulfide combinations with the input of NOE upper distance constraints and dihedral angle constraints. For a group of 20 conformers used to characterize the solution structure, the average pairwise root-mean-square distances from the mean coordinates calculated for the backbone heavy atoms N, C(alpha) and C' of resideus 1-51 is 0.38 A. The molecular architecture consists of a three-dimensional arrangement of five helices comprised of residues 2-8, 14-17, 26-29, 34-36 and 38-47, with five disulfide bridges in the positions 3-24, 6-16, 13-47, 27-40, and 35-51, which has so far not been represented in the Protein Data Bank. Er-23 is unique among presently known Er-pheromones with respect to size, sequence, the number of disulfide bonds and the three-dimensional structure, thus providing a new structural basis for rationalizing the physiological functions of this protein family.     

NMR solution structure of attractin,a water-borne protein pheromone from the mollusk Aplysia californica

Water-borne protein pheromones are essential for coordination of reproductive activities in many marine organisms. In this paper, we describe the first structure of a pheromone protein from a marine organism, that of attractin (58 residues) from Aplysia californica. The NMR solution structure was determined from TOCSY, NOESY, and DQF-COSY measurements of recombinant attractin expressed in insect cells. The sequential resonance assignments were done with standard manual procedures. Approximately 90% of the 949 unambiguous NOESY cross-peaks were assigned automatically with simultaneous three-dimensional structure calculation using our NOAH/DIAMOD/FANTOM program suite. The final bundle of energy-refined structures is well-defined, with an average rmsd value to the mean structure of 0.72 +/- 0.12 A for backbone and 1.32 +/- 0.11 A for heavy atoms for amino acids 3-47. Attractin contains two antiparallel helices, made up of residues Ile9-Gln16 and I30-S36. The NMR distance constraints are consistent with the three disulfide bonds determined by mass spectroscopy (C4-C41, C13-C33, and C20-C26), where the first two could be directly determined from NOESY cross-peaks between CH beta protons of the corresponding cysteines. The second helix contains the (L/I)(29)IEECKTS(36) sequence conserved in attractins from five species of Aplysia that could interact with the receptor. The sequence and structure of this region are similar to those of the recognition helix of the Er-11 pheromone of the unicellular ciliate Euplotes raikovi, suggesting a possible common pathway for intercellular communication of these two distinct pheromone families.     

A structurally deviant member of the Euplotes raikovi pheromone family: Er-23

Pheromones of Euplotes raikovi form a homologous family of proteins with 37- to 40-amino acid residues, including six cysteines that form three strictly conserved disulfide bridges. The determination of the primary structure of the pheromone Er-23, which was isolated from cells derived from natural populations of E. raikovi that secrete the other known pheromones, has now revealed a novel structure type. The polypeptide chain of this pheromone contains 51 residues, 10 of which are cysteines presumably involved in the formation of five disulfide bridges, and lacks a carboxyl-terminal tail following the last cysteine of the sequence. The elongation of the Er-23 molecule is presumed to result from multiple events of gene duplication starting from an ancestral motif Xxx(2-4)-Cys-Xxx(5-7)-Cys.     

Purification, characterization, and amino acid sequence of the mating pheromone Er-10 of the ciliate Euplotes raikovi

The mating pheromone Er-10 from mat-10 homozygous Euplotes raikovi was purified by a three-step purification procedure with an overall yield of 62%. It was identified as a protein of molecular weight 8000 having an isoelectic point of 3.9. Its complete primary structure was determined by automated Edman degradation of the whole protein after performic acid oxidation and of peptides generated by cyanogen bromide and Staphylococcus aureus V8 protease. The proposed sequence is Asp1-Leu-Cys-Glu-Gln-Ser-Ala-Leu-Gln-Cys10-Asn-Glu-Gln-Gly-Cys-His -Asn-Phe-Cys- Ser20-Pro-Glu-Asp-Lys-Pro-Gly-Cys-Leu-Gly-Met30-Val-Trp-Asn- Pro-Glu-Leu-Cys- Pro38. The calculated molecular weight of 4191.7, which is in good agreement with the value of m/z 4190.7 obtained by fission fragment ionization mass spectrometry, suggests that the native structure is a dimer with three intrachain disulfide bonds in each subunit. The amino acid sequence is 43% identical with that of the E. raikovi mating pheromone Er-1, with the identities concentrated in the amino-terminal half. The half-cystine locations are conserved, but Er-10 is two residues shorter than Er-1. Prediction of the secondary structure suggests that Er-10 may also contain a helical structure at the amino terminus. These results indicate that the mating pheromones of E. raikovi form a homologous family.     

Nuclear magnetic resonance solution structure of hirudin(1-51) and comparison with corresponding three-dimensional structures determined using the complete 65-residue hirudin polypeptide chain.

The three-dimensional structure of the N-terminal 51-residue domain of recombinant hirudin in aqueous solution was determined by 1H nuclear magnetic resonance (NMR) spectroscopy, and the resulting high-quality solution structure was compared with corresponding structures obtained from studies with the intact, 65-residue polypeptide chain of hirudin. On the basis of 580 distance constraints derived from nuclear Overhauser effects and 109 dihedral angle constraints, a group of 20 conformers representing the solution structure of hirudin(1-51) was computed with the program DIANA and energy-minimized with a modified version of the program AMBER. Residues 3 to 30 and 37 to 48 form a well-defined molecular core with two antiparallel beta-sheets composed of residues 14 to 16 and 20 to 22, and 27 to 31 and 36 to 40, and three reverse turns at residues 8 to 11 (type II), 17 to 20 (type II') and 23 to 26 (type II). The average root-mean-square deviation of the individual NMR conformers relative to their mean co-ordinates is 0.38 A for the backbone atoms and 0.77 A for all heavy atoms of these residues. Increased structural disorder was found for the N-terminal dipeptide segment, the loop at residues 31 to 36, and the C-terminal tripeptide segment. The solution structure of hirudin(1-51) has the same molecular architecture as the corresponding polypeptide segment in natural hirudin and recombinant desulfatohirudin. It is also closely similar to the crystal structure of the N-terminal 51-residue segment of hirudin in a hirudin-thrombin complex, with root-mean-square deviations of the crystal structure relative to the mean solution structure of 0.61 A for the backbone atoms and 0.91 A for all heavy atoms of residues 3 to 30 and 37 to 48. Further coincidence is found for the loop formed by residues 31 to 36, which shows increased structural disorder in all available solution structures of hirudin, and of which residues 32 to 35 are not observable in the electron density map of the thrombin complex. Significant local structural differences between hirudin(1-51) in solution and hirudin in the crystalline thrombin complex were identified mainly for the N-terminal tripeptide segment and residues 17 to 21. These are further analyzed in an accompanying paper.     

Investigation of the solution conformation of cytochrome c-551 from Pseudomonas stutzeri.

1H NMR spectroscopy and solution structure computations have been used to examine ferrocytochrome c-551 from Pseudomonas stutzeri (ATCC 17588). Resonance assignments are proposed for all main-chain and most side-chain protons. Distance constraints were determined on the basis of nuclear Overhauser enhancements between pairs of protons. Dihedral angle constraints were determined from estimates of scaler coupling constants. Twenty-four structures were calculated by distance geometry and refined by energy minimization and simulated annealing on the basis of 1033 interproton distance and 57 torsion angle constraints. Both the main-chain and side-chain atoms are well defined except for a loop region around residues 34-40, the first two residues at the N-terminus and the last two at the C-terminus, and some side chains located on the molecular surface. The average root mean squared deviation in position for equivalent atoms between the 24 individual structures and the mean structure obtained by averaging their coordinates is 0.54 +/- 0.08 A for the main-chain atoms and 0.97 +/- 0.09 A for all non-hydrogen atoms of residues 3-80 plus the heme group. These structures were compared to the X-ray crystallographic structure of an analogous protein, cytochrome c-551 from Pseudomonas aeruginosa [Matsuura, Takano, & Dickerson (1982) J. Mol. Biol. 156, 389-409). The main-chain folding patterns are very consistent, but there are some differences. The largest difference is in a surface loop segment from residues 34 to 40.     

Solution structure of apamin determined by nuclear magnetic resonance and distance geometry

The solution structure of the bee venom neurotoxin apamin has been determined with a distance geometry program using distance constraints derived from NMR. Twenty embedded structures were generated and refined by using the program DSPACE. After error minimization using both conjugate gradient and dynamics algorithms, six structures had very low residual error. Comparisons of these show that the backbone of the peptide is quite well-defined with the largest rms difference between backbone atoms in these structures of 1.34 A. The side chains have far fewer constraints and show greater variability in their positions. The structure derived here is generally consistent with the qualitative model previously described, with most differences occurring in the loop between the beta-turn (residues 2-5) and the C-terminal alpha-helix (residues 9-17). Comparisons are made with previously derived models from NMR data and other methods.     

Three-dimensional structure of the neurotoxin ATX Ia from Anemonia sulcata in aqueous solution determined by nuclear magnetic resonance spectroscopy

With the aid of 1H nuclear magnetic resonance (NMR) spectroscopy, the three-dimensional structure in aqueous solution was determined for ATX Ia, which is a 46 residue polypeptide neurotoxin of the sea anemone Anemonia sulcata. The input for the structure calculations consisted of 263 distance constraints from nuclear Overhauser effects (NOE) and 76 vicinal coupling constants. For the structure calculation several new or ammended programs were used in a revised strategy consisting of five successive computational steps. First, the program HABAS was used for a complete search of all backbone and chi 1 conformations that are compatible with the intraresidual and sequential NMR constraints. Second, using the program DISMAN, we extended this approach to pentapeptides by extensive sampling of all conformations that are consistent with the local and medium-range NMR constraints. Both steps resulted in the definition of additional dihedral angle constraints and in stereospecific assignments for a number of beta-methylene groups. In the next two steps DISMAN was used to obtain a group of eight conformers that contain no significant residual violations of the NMR constraints or van der Waals contacts. Finally, these structures were subjected to restrained energy refinement with a modified version of the molecular mechanics module of AMBER, which in addition to the energy force field includes potentials for the NOE distance constraints and the dihedral angle constraints. The average of the pairwise minimal RMS distances between the resulting refined conformers calculated for the well defined molecular core, which contains the backbone atoms of 35 residues and 20 interior side chains, is 1.5 +/- 0.3 A. This core is formed by a four-stranded beta-sheet connected by two well-defined loops, and there is an additional flexible loop consisting of the eleven residues 8-18. The core of the protein is stabilized by three disulfide bridges, which are surrounded by hydrophobic residues and shielded on one side by hydrophilic residues.     

Determination of a high-quality nuclear magnetic resonance solution structure of the bovine pancreatic trypsin inhibitor and comparison with three crystal structures.

A high-quality three-dimensional structure of the bovine pancreatic trypsin inhibitor (BPTI) in aqueous solution was determined by 1H nuclear magnetic resonance (n.m.r.) spectroscopy and compared to the three available high-resolution X-ray crystal structures. A newly collected input of 642 distance constraints derived from nuclear Overhauser effects and 115 dihedral angle constraints was used for the structure calculations with the program DIANA, followed by restrained energy minimization with the program AMBER. The BPTI solution structure is represented by a group of 20 conformers with an average root-mean-square deviation (RMSD) relative to the mean solution structure of 0.43 A for backbone atoms and 0.92 A for all heavy atoms of residues 2 to 56. The pairwise RMSD values of the three crystal structures relative to the mean solution structure are 0.76 to 0.85 A for the backbone atoms and 1.24 to 1.33 A for all heavy atoms of residues 2 to 56. Small local differences in backbone atom positions between the solution structure and the X-ray structures near residues 9, 25 to 27, 46 to 48 and 52 to 58, and conformational differences for individual amino acid side-chains were analyzed for possible correlations with intermolecular protein-protein contacts in the crystal lattices, using the pairwise RMSD values among the three crystal structures as a reference.     

Three-dimensional structure of acyl carrier protein determined by NMR pseudoenergy and distance geometry calculations

Distance constraints from two-dimensional NMR cross-relaxation data are used to derive a three-dimensional structure for acyl carrier protein from Escherichia coli. Several approaches to structure determination are explored. The most successful proves to be an approach that combines the early stages of a distance geometry program with energy minimization in the presence of NMR constraints represented as pseudopotentials. Approximately 450 proton to proton distance constraints including 50 long-range constraints were included in these programs. Starting structures were generated at random by the distance geometry program and energies minimized by a molecular mechanics module to give final structures. Seven of the structures were deemed acceptable on the basis of agreement with experimentally determined distances. Root-mean-square deviations from the mean of these structures for backbone atoms range from 2 to 3 A. All structures show three roughly parallel helices with hydrophobic residues facing inward and hydrophilic residues facing outward. A hydrophobic cleft is recognizable and is identified as a likely site for acyl chain binding.     

Solution conformation of cytochrome c-551 from Pseudomonas stutzeri ZoBell determined by NMR.

1H NMR spectroscopy and solution structure computations have been used to examine ferrocytochrome c-551 from Pseudomonas stutzeri ZoBell (ATCC 14405). Resonance assignments are proposed for all main-chain and most side-chain protons. Stereospecific assignments were also made for some of the beta-methylene protons and valine methyl protons. Distance constraints were determined based upon nuclear Overhauser enhancements between pairs of protons. Dihedral angle constraints were determined from estimates of scalar coupling constants and intra-residue NOEs. Twenty structures were calculated by distance geometry and refined by energy minimization and simulated annealing on the basis of 1012 interproton distance and 74 torsion angle constraints. Both the main-chain and side-chain atoms are well defined except for two terminal residues, and some side-chain atoms located on the molecular surface. The average root mean squared deviation in the position for equivalent atoms between the 20 individual structures and the mean structure obtained by averaging their coordinates is 0.56 +/- 0.10 A for the main-chain atoms, and 0.95 +/- 0.09 A for all nonhydrogen atoms of residue 3 to 80 plus the heme group. The average structure was compared with an analogous protein, cytochrome c-551 from pseudomonas stutzeri. The main-chain folding patterns are very consistent, but there are some differences, some of which can be attributed to the loss of normally conserved aromatic residues in the ZoBell c-551.     

Determination of the spatial structure of insectotoxin 15A from Buthus erpeus by (1)H-NMR spectroscopy data]

The solution structure of insectotoxin 15A (35 residues) from scorpion Buthus eupeus was determined on the basis of 386 interproton distance restraints 12 hydrogen-bonding restraints and 113 dihedral angle restraints derived from 1H NMR experiments. A group of 20 structures was calculated with the distance geometry program DIANA followed by the restrained energy minimization with the program CHARMM. The atomic RMS distribution about the mean coordinate position is 0.64 +/- 0.11 A for the backbone atoms and 1.35 +/- 0.20 A for all atoms. The structure contains an alpha-helix (residues 10-20) and a three-stranded antiparallel beta-sheet (residues 2-5, 24-28 and 29-33). A pairing of the eight cysteine residues of insectotoxin 15A was established basing on NMR data. Three disulfide bridges (residues 2-19, 16-31 and 20-33) connect the alpha-helix with the beta-sheet, and the fourth one (5-26) joins beta-strands together. The spatial fold of secondary structure elements (the alpha-helix and the beta-sheet) of the insectotoxin 15A is very similar to those of the other short and long scorpion toxins in spite of a low (about 20%) sequence homology.     

Solution structure of neurotoxin I from the sea anemone Stichodactyla helianthus. A nuclear magnetic resonance, distance geometry, and restrained molecular dynamics study

The three-dimensional structure of the sea anemone polypeptide Stichodactyla helianthus neurotoxin I in aqueous solution has been determined using distance geometry and restrained molecular dynamics simulations based on NMR data acquired at 500 MHz. A set of 470 nuclear Overhauser enhancement values was measured, of which 216 were used as distance restraints in the structure determination along with 15 dihedral angles derived from coupling constants. After restrained molecular dynamics refinement, the eight structures that best fit the input data form a closely related family. They describe a structure that consists of a core of twisted, four-stranded, antiparallel beta-sheet encompassing residues 1-3, 19-24, 29-34, and 40-47, joined by three loops, two of which are well defined by the NMR data. The third loop, encompassing residues 7-16, is poorly defined by the data and is assumed to undergo conformational averaging in solution. Pairwise root mean square displacement values for the backbone heavy atoms of the eight best structures are 1.3 +/- 0.2A when the poorly defined loop is excluded and 3.6 +/- 1.0A for all backbone atoms. Refinement using restrained molecular dynamics improved the quality of the structures generated by distance geometry calculations with respect to the number of nuclear Overhauser enhancements violated, the size of the total distance violations and the total potential energies of the structures. The family of structures for S. heliathus neurotoxin I is compared with structures of related sea anemone proteins that also bind to the voltage-gated sodium channel.     

Tertiary structure of conotoxin GIIIA in aqueous solution

The three-dimensional structure of conotoxin GIIIA, an important constituent of the venom from the marine hunting snail Conus geographus L., was determined in aqueous solution by two-dimensional proton nuclear magnetic resonance and simulated annealing based methods. On the basis of 162 assigned nuclear Overhauser effect (NOE) connectivities obtained at the medium field strength frequency of 400 MHz, 74 final distance constraints of sequential and tertiary ones were derived and used together with 18 torsion angle (phi, chi 1) constraints and 9 distance constraints derived from disulfide bridges. A total of 32 converged structures were obtained from 200 runs of calculations. The atomic root-mean-square (RMS) difference about the mean coordinate positions (excluding the terminal residues 1 and 22) is 0.8 A for backbone atoms (N, C alpha, C). Conotoxin GIIIA is characterized by a particular folding of the 22 amino acid peptidic chain, which is stabilized by three disulfide bridges arranged in cage at the center of a discoidal structure of approximately 20-A diameter. The seven cationic side chains of lysine and arginine residues project radially into the solvent and form potential sites of interaction with the skeletal muscle sodium channel for which the toxin is a strong inhibitor. The present results provide a molecular basis to elucidate the remarkable physiological properties of this neurotoxin.     

The structure of the translational initiation factor IF1 from E.coli contains an oligomer-binding motif.

The structure of the translational initiation factor IF1 from Escherichia coli has been determined with multidimensional NMR spectroscopy. Using 1041 distance and 78 dihedral constraints, 40 distance geometry structures were calculated, which were refined by restrained molecular dynamics. From this set, 19 structures were selected, having low constraint energy and few constraint violations. The ensemble of 19 structures displays a root-mean-square deviation versus the average of 0.49 A for the backbone atoms and 1.12 A for all atoms for residues 6-36 and 46-67. The structure of IF1 is characterized by a five-stranded beta-barrel. The loop connecting strands three and four contains a short 3(10) helix but this region shows considerably higher flexibility than the beta-barrel. The fold of IF1 is very similar to that found in the bacterial cold shock proteins CspA and CspB, the N-terminal domain of aspartyl-tRNA synthetase and the staphylococcal nuclease, and can be identified as the oligomer-binding motif. Several proteins of this family are nucleic acid-binding proteins. This suggests that IF1 plays its role in the initiation of protein synthesis by nucleic acid interactions. Specific changes of NMR signals of IF1 upon titration with 30S ribosomal subunit identifies several residues that are involved in the interaction with ribosomes.     

Three-dimensional structure of porcine C5adesArg from 1H nuclear magnetic resonance data

Two-dimensional nuclear magnetic resonance spectra of porcine C5adesArg (73 residues) have been used to construct a list of 34 hydrogen bonds, 27 dihedral angle constraints, and 151 distance constraints, derived from nuclear Overhauser effect data. These constraints were used in restrained molecular dynamics calculations on residues 1-65 of C5a, starting from a folded structure modeled on the crystal structure of a homologous protein, C3a. Forty-one structures have been calculated, which fall into three similar families with few violations of the imposed constraints. Structures in the most populated family have a root-mean-square deviation from the average structure of 1.02 A for the C alpha atoms, with good definition of the internal residues. There is good agreement between the calculated structures and other nuclear magnetic resonance data. The structure is very similar to that recently reported for human C5a [Zuiderweg et al. (1989) Biochemistry 28, 172-185]. Some biological implications of these structures are discussed.     

Nuclear magnetic resonance solution structure of truncated human GRObeta [5-73] and its structural comparison with CXC chemokine family members GROalpha and IL-8

The three-dimensional structure of a novel four amino acid truncated form of the CXC chemokine GRObeta [5-73] isolated from bone marrow stromal cells with potent hematopoietic and anti-infective activities has been determined by two-dimensional (1)H nuclear magnetic resonance (NMR) spectroscopy in solution. On the basis of 1878 upper distance constraints derived from nuclear Overhauser effects (NOE) and 314 dihedral angle constraints, a group of 20 conformers representing the solution structure of the human GRObeta [5-73] was computed with the program DYANA. At the concentrations used for NMR study, GRObeta [5-73] forms a dimer in solution that is architectured by a six-stranded antiparallel beta-sheet (residues 25 to 29, 39 to 44, 49 to 52) and a pair of helices (residues 58 to 68) with 2-fold symmetry, while the C terminus of the protein is disordered. The average of the pairwise root-mean-square deviations of individual NMR conformers relative to the mean coordinates for the backbone atoms N, C(alpha) and C' of residues 5 to 68 is 0.47 A. Overall, the global fold of GRObeta [5-73] is similar to that of the previously reported NMR structure of GROalpha and the NMR and X-ray structures of interleukin-8. Among these three CXC chemokines, GRObeta [5-73] is most similar in structure to GROalpha. Significant differences between GRObeta [5-73], GROalpha and interleukin-8 are in the N-terminal loop comprising residues 12 to 19. The N-terminal arm containing the conserved ELR motif and the loop of residues 30 to 38 containing the GPH motif are different among these three CXC chemokines. The structural differences in these two regions may be responsible for the specificity of the receptor binding and biological activity of different chemokines.     

Three-dimensional structure of potato carboxypeptidase inhibitor in solution. A study using nuclear magnetic resonance, distance geometry, and restrained molecular dynamics

The solution conformation of potato carboxypeptidase inhibitor (CPI) has been investigated by 1H NMR spectroscopy. The spectrum is assigned in a sequential manner by using two-dimensional NMR techniques to identify through-bond and through-space (less than 5 A) connectivities. A set of 309 approximate interproton distance restraints is derived from the two-dimensional nuclear Overhauser enhancement spectra and used as the basis of a three-dimensional structure determination by a combination of metric matrix distance geometry and restrained molecular dynamics calculations. A total of 11 converged distance geometry structures were computed and refined by using restrained molecular dynamics. The average atomic root mean square (rms) difference between the final 11 structures and the mean structure obtained by averaging their coordinates is 1.4 +/- 0.3 A for residues 2-39 and 0.9 +/- 0.2 A for residues 5-37. The corresponding values for all atoms are 1.9 +/- 0.3 and 1.4 +/- 0.2 A, respectively. The larger values for residues 2-38 relative to those for residues 5-37 arise from the fact that the positions of the N- (residues 1-4) and C- (residues 38-39) terminal tails are rather poorly determined, whereas those of the core of the protein (residues 5-37) are well determined by the experimental interproton distance data. The computed structures are very close to the X-ray structure of CPI in its complex with carboxypeptidase, and the backbone atomic rms difference between the mean of the computed structures and the X-ray structure is only 1.2 A. Nevertheless, there are some real differences present which are evidenced by significant deviations between the experimental upper interproton distance limits and the corresponding interproton distances derived from the X-ray structure. These principally occur in two regions, residues 18-20 and residues 28-30, the latter comprising part of the region of secondary contacts between CPI and carboxypeptidase in the X-ray structure.