Enhanced production of lactic acid through the use of a novel aqueous two-phase system as an extractive fermentation system

 In order to enhance the productivity of lactic acid and reduce the end-product inhibition of fermentation, the partitioning and growth of four different strains of lactic acid bacteria in three different aqueous two-phase systems were studied. Polyethyleneglycol/ dextran, polyethyleneglycol/hydroxypropyl starch polymer (HPS), and a random copolymer of ethylene oxide and propylene oxide (EO-PO)/HPS were used as polymer systems. One strain each of Lactococcus lactis subsp. lactis and of Lactobacillus delbrueckii subsp. delbrueckii partitioned completely to the interface and bottom phase in two-phase systems with low polymer concentrations of EO-PO/HPS100 and EO-PO/ HPS200. The growth and production of lactic acid by two of three L. lactis strains in a two-phase system with 5.5% (w/w) EO-PO and 12.0% (w/w) HPS100 were reduced by less than 10% compared with a reference fermentation in a normal growth medium. The viability of L. lactis subsp. lactis ATCC 19435 was maintained for at least 50 h and with four top-phase replacements during extractive fermentation in the EO-PO/HPS100 system. Moreover, when cell density reached the stationary phase in the first extractive fermentation, the lactate production in this aqueous two-phase system was maintained. Received: 2 October 1995/Received revision: 16 January 1996/Accepted: 22 January 1996     

Batch fermentation of whey ultrafiltrate by Lactobacillus helveticus for lactic acid production

Summary Cheese whey ultrafiltrate (WU) was used as the carbon source for the production of lactic acid by batch fermentation with Lactobacillus helveticus strain milano. The fermentation was conducted in a 400 ml fermentor at an agitation rate of 200 rpm and under conditions of controlled temperature (42° C) and pH. In the whey ultrafiltrate-corn steep liquor (WU-CSL) medium, the optimal pH for fermentation was 5.9. Inoculum propagated in skim milk (SM) medium or in lactose synthetic (LS) medium resulted in the best performance in fermentation (in terms of growth, lactic acid production, lactic acid yield and maximum productivity of lactic acid), as compared to that propagated in glucose synthetic (GS) medium. The yeast extract ultrafiltrate (YEU) used as the nitrogen/growth factor source in the WU medium at 1.5% (w/v) gave the highest maximum productivity of lactic acid of 2.70 g/l-h, as compared to the CSL and the tryptone ultrafiltrate (TU). L. helveticus is more advantageous than Streptococcus thermophilus and Lactobacillus delbrueckii for the production of lactic acid from WU. The L. helveticus process will provide an alternative solution to the phage contamination in dairy industries using Lactobacillus bulgaricus.     

Microbial production of d‐lactic acid from dried distiller's grains with solubles

d ‐Lactic acid production is gaining increasing attention due to the thermostable properties of its polymer, poly‐d ‐lactic acid . In this study, Lactobacillus coryniformis subsp. torquens, was evaluated for its ability to produce d ‐lactic acid using Dried Distiller's Grains with Solubles (DDGS) hydrolysate as the substrate. DDGS was first subjected to alkaline pretreatment with sodium hydroxide to remove the hemicellulose component and the generated carbohydrate‐rich solids were then subjected to enzymatic hydrolysis using cellulase mixture Accellerase® 1500. When comparing separate hydrolysis and fermentation and simultaneous saccharification and fermentation (SSF) of L. coryniformis on DDGS hydrolysate, the latter method demonstrated higher d ‐lactic acid production (27.9 g/L, 99.9% optical purity of d ‐lactic acid), with a higher glucose to d ‐lactic acid conversion yield (84.5%) compared to the former one (24.1 g/L, 99.9% optical purity of d ‐lactic acid). In addition, the effect of increasing the DDGS concentration in the fermentation system was investigated via a fed‐batch SSF approach, where it was shown that the d ‐lactic acid production increased to 38.1 g/L and the conversion yield decreased to 70%. In conclusion, the SSF approach proved to be an efficient strategy for the production of d ‐lactic acid from DDGS as it reduced the overall processing time and yielded high d ‐lactic acid concentrations.     

Influence of growth supplements on lactic acid production in whey ultrafiltrate by Lactobacillus helveticus

Summary Investigations have been carried out on lactic acid production by Lactobacillus helveticus CNRZ 303 in whey ultrafiltrate. Addition of beet molasses was investigated with good results, although yeast extract proved to be more effective. The size of inoculum and the preculture medium also played a significant role in determining the amount of lactic acid produced during the fermentation process. High lactose consumption (94.09%), together with good lactic acid production (26.09 g/l) and yield (0.90%), were obtained in whey ultrafiltrate supplemented with 1% (w/v) beet molasses (WUM), with a 10% (w/v) inoculum and peptonized milk as preculture medium. Although these results were similar to those obtained when yeast extract was used as supplement, the maximum volumetric productivities proved to be quite different, and were definitely higher with yeast extract. Offprint requests to: L. Chiarini     

Integrated production of lactic acid and biomass on distillery stillage

The possibilities of parallel lactic acid and biomass production in batch and fed-batch fermentation on distillery stillage from bioethanol production were studied. The highest lactic acid yield and productivity of 92.3 % and 1.49 g L^?1 h^?1 were achieved in batch fermentation with initial sugar concentration of 55 g L^?1. A significant improvement of the process was achieved in fed-batch fermentation where the concentration of lactic acid was increased to 47.6 % and volumetric productivity for 21 % over the batch process. A high number of Lactobacillus rhamnosus ATCC 7469 viable cells of 10⁹ CFU ml^?1 was attained at the end of fed-batch fermentation. The survival of 92.9 % of L. rhamnosus cells after 3 h of incubation at pH 2.5 validated that the fermentation media remained after lactic acid removal could be used as a biomass-enriched animal feed thus making an additional value to the process.     

Fermentation of pomegranate juice by probiotic lactic acid bacteria

In this research, production of probiotic pomegranate juice through its fermentation by four strains of lactic acid bacteria: Lactobacillus plantarum, L. delbruekii, L. paracasei, L. acidophilus was examined. Fermentation was carried out at 30°C for 72 h under microaerophilic conditions. Microbial population, pH, titrable acidity, sugar and organic acid metabolism were measured during the fermentation period and the viability of all strains was also determined during the storage time at 4°C within 4 weeks. The results indicated that L. plantarum and L. delbruekii increased the pH sharply at the initial stages of fermentation and the sugar consumption was also higher in comparison with other strains, better microbial growth was also observed for these two strains during fermentation. Citric acid, as a major organic acid in pomegranate juice was significantly consumed by all probiotic lactic acid bacteria. L. plantarum and L. delbruekii showed higher viability during the storage time. Viable cells remained at their maximum level within 2 weeks but decreased dramatically after 4 weeks. Pomegranate juice was proved to be a suitable media for production of a fermented probiotic drink.     

Production of L(+)-lactic acid from glucose and starch by immobilized cells of Rhizopus oryzae in a rotating fibrous bed bioreactor

A rotating fibrous-bed bioreactor (RFB) was developed for fermentation to produce L(+)-lactic acid from glucose and cornstarch by Rhizopus oryzae. Fungal mycelia were immobilized on cotton cloth in the RFB for a prolonged period to study the fermentation kinetics and process stability. The pH and dissolved oxygen concentration (DO) were found to have significant effects on lactic acid productivity and yield, with pH 6 and 90% DO being the optimal conditions. A high lactic acid yield of 90% (w/w) and productivity of 2.5 g/L.h (467 g/h.m(2)) was obtained from glucose in fed-batch fermentation. When cornstarch was used as the substrate, the lactic acid yield was close to 100% (w/w) and the productivity was 1.65 g/L.h (300 g/h.m(2)). The highest concentration of lactic acid achieved in these fed-batch fermentations was 127 g/L. The immobilized-cells fermentation in the RFB gave a virtually cell-free fermentation broth and provided many advantages over conventional fermentation processes, especially those with freely suspended fungal cells. Without immobilization with the cotton cloth, mycelia grew everywhere in the fermentor and caused serious problems in reactor control and operation and consequently the fermentation was poor in lactic acid production. Oxygen transfer in the RFB was also studied and the volumetric oxygen transfer coefficients under various aeration and agitation conditions were determined and then used to estimate the oxygen transfer rate and uptake rate during the fermentation. The results showed that the oxygen uptake rate increased with increasing DO, indicating that oxygen transfer was limited by the diffusion inside the mycelial layer.     

Optimization of the Process for the Production of L(+)‐Lactic Acid from Cull Potato by Rhizopus oryzae

Cull potato is currently an under‐utilized biomass in the potato processing states of the USA. L(+)‐Lactic acid production by three Rhizopus strains and one homofermentative, facultative anaerobic Lactobacillus amylophilus strain was investigated using potatoes as the sole nutrient supply in the culture medium. Rhizopus oryzae NRRL 395 was chosen as the strain for further studies because it showed the highest lactate yield. The fermentation conditions for seed cultures were studied for three treatment structures using a completely randomized design. Optimum conditions for the seed culture were determined to be 2 % potato medium, 10⁴ spores/mL concentration, and 24 h of fermentation. Plackett‐Burman and central composite designs were used to screen and optimize the factors for lactic acid production. Substrate (potato) concentration, fermentation temperature, and shaking speed were found to be the most significant factors affecting both the yield and concentration of lactate. Optimum values for substrate concentration, fermentation temperature, and shaking speed were 10 %, 27 °C, and 170 rpm, respectively. Under these optimum conditions, the lactate concentration was predicted by the model to be 35.5 g/L, which was verified by the experimental data (33.3 g/L). The results indicate that cull potato can be an effective feedstock for R. ryzae NRRL 395 in the production of lactic acid.     

Production of optically pure <Emphasis Type="SmallCaps">l</Emphasis>(+)-lactic acid from waste plywood chips using an isolated thermotolerant <Emphasis Type="Italic">Enterococcus faecalis</Emphasis> SI at a pilot scale

Utilization of renewable and low-cost lignocellulosic wastes has received major focus in industrial lactic acid production. The use of high solid loadings in biomass pretreatment potentially offers advantages over low solid loadings including higher lactic acid concentration with decreased production and capital costs. In this study, an isolated Enterococcus faecalis SI with optimal temperature 42 °C was used to produce optically pure l-lactic acid (>?99%) from enzyme-saccharified hydrolysates of acid-impregnated steam explosion (AISE)-treated plywood chips. The l-lactic acid production increased by 10% at 5 L scale compared to the similar fermentation scheme reported by Wee et al. The fermentation with a high solid loading of 20% and 35% (w/v) AISE-pretreated plywood chips had been successfully scaled up to process development unit scale (100 L) and pilot scale (9 m³), respectively. This is the first report of pilot-scale lignocellulosic lactic acid fermentation by E. faecalis with high lactic acid titer (nearly 92 g L^?1) and yield (0.97 kg kg^?1). Therefore, large-scale l-lactic acid production by E. faecalis SI shows the potential application for industries.     

Lactic acid production from agriculture residues

Various agriculture feedstock residues were evaluated for lactic acid production by simultaneous saccharification and fermentation (SSF) using Lactobacillus delbrueckii and Lactobacillus plantarum, without any additional nutrients. Lactic acid production was higher in alfalfa fiber and soya fiber compared to corncob (soft) and wheat straw. In Lactobacillus plantarum, the amount of lactic acid obtained from alfalfa fiber and soya fiber was 46 and 44 g/100 g fiber, respectively. However, in Lactobacillus delbrueckii, the lactic acid production in soya fiber was 44 g/100 g fiber and that of alfalfa was 32 g/100 g fiber. Small amounts of acetic acid were also produced from SSF of agricultural feedstocks residues. During SSF of alfalfa fiber, lactic acid production in both L. delbrueckii and L. plantarum was enhanced by adding pectinases and cellulases. Lactic acid production from alfalfa fiber did not change with increasing O₂ transfer rates in the fermentation medium, whereas acetic acid production in both Lactobacillus cultures increased with increasing O₂ transfer rates.     

Enhancement of lactic acid production with ram horn peptone by Lactobacillus casei

Ram horns are a waste material from the meat industry. The use of ram horn peptone (RHP) as a supplement for lactic acid production was investigated using Lactobacillus casei. For this purpose, first, RHP was produced. Ram horns were hydrolysed by treating with acids (3 M H₂SO₄ and 6 M HCl) and neutralizing the solutions to yield ram horn hydrolysate (RHH). The RHH was evaporated to yield RHP. The amounts of protein, nitrogen, ash, some minerals, total sugars, total lipids and amino acids of the RHP were determined and compared with a bacto-tryptone from casein. When the concentrations (1–6% w/v) of the RHP were used in bacterial growth medium as a supplement, 2% RHP (ram horn peptone medium) had a maximum influence on the production of lactic acid by L. casei. The content of lactic acid in the culture broth containing 2% RHP (43 g l^–1) grown for 24 h was 30% higher than that of the control culture broth (33 g l^–1) and 10% higher than that of 2% bacto-tryptone (39 g l^–1). RHP was demonstrated to be a suitable supplement for production of lactic acid. This RHP may prove to be a valuable supplement in fermentation technology.     

Lactic acid fermentation of crude sorghum extract

Crude extract from sweet sorghum supplemented with vetch juice was utilized as the carbohydrate source for fermentative production of lactic acid. Fermentation of media containing 7%(w/v) total sugar was complex completed in 60–80 hr by Lactobacillus plantarum, product yield averaging 85%. Maximum acid production rates were dependent on pH, initial substrate distribution, and concentration, the rates varying from 2 to 5 g(liter·hr.) The lactic acid yield was lowered to 67% under limited medium supplementation. The fermented ammoniated product contained over eight times as much equivalent crude protein (N × 6.25) as the original medium. Unstructured kinetic models were developed for cell growth, lactic acid formation, and substrate consumption in batch fermentation. With the provision of experimentally determined kinetic parameters, the proposed models accurately the fermentation process.     

Optimization of L(+)-lactic acid production employing statistical experimental design

Summary An orthogonal 2³-factorial experimental design was used to optimize L(+)-lactic acid production byLactobacillus casei. With a 22 % (v/v) inoculum the optimum concentration of yeast extract for maximum lactic acid concentration and yield was about 2 % (w/v) and that of the initial glucose 9 to 11 %.     

Lactic acid fermentation on barley flour without additional nutrients

Summary An amylolytic lactic acid producing Lactobacillus amylovorus produced 36 g/l of lactic acid in mixed cultures with L. casei without additional nutrients at 37 °C in 48 h, when barley flour concentration was 180 g/l (appr. 108 g/l starch) and barley malt quantity 0.8% of flour weight. This represented an improvement of up to 20% in comparison to the fermentation with L. amylovorus or L. casei alone. By simultaneous glucoamylase addition lactic acid production yield was about doubled. With L. casei the lactic acid yield was from 580 g in 72 h to 667 g in 144 h per kg barley flour.     

Simultaneous liquefaction,saccharification, and fermentation of l-lactic acid using aging paddy rice with hull by an isolated thermotolerant Enterococcus faecalis DUT1805

Simultaneous liquefaction, saccharification, and fermentation (SLSF) has attracted much attention for the production of bio-based chemicals, including l-lactic acid, due to its high efficiency and low cost. In this study, a lactic acid-producing bacterium with high tolerance of temperature up to 55 °C was isolated and characterized as Enterococcus faecalis DUT1805. Various strategies of stepwise controlled temperature were proposed and investigated for glucose utilization. The results indicated that E. faecalis DUT 1805 exhibited an optimal temperature at 50 °C, which could achieve temperature compatibility of enzyme, saccharification, and fermentation, and decrease the possibility of contamination by the other microorganisms during the large-scale fermentation. To reduce the cost of raw material and operation for lactic acid production, aging paddy rice with hull (APRH) was used in l-lactic acid production by simultaneous liquefaction, saccharification, and fermentation (SLSF). An open SLSF operation at 50 °C and pH 6.5, and 17% (w/v) solid loading in 5 L bioreactors was demonstrated with the lactic acid titer, yield, and productivity of 73.75 g/L, 87% to initial starch, and 2.17 g/(L h), respectively.

     

Production of l (+) lactic acid by Lactobacillus delbrueckii immobilized in functionalized alginate matrices

The role of functionalized alginate gels as immobilized matrices in production of l (+) lactic acid by Lactobacillus delbrueckii was studied. L. delbrueckii cells immobilized in functionalized alginate beads showed enhanced bead stability and selectivity towards production of optically pure l (+) lactic acid in higher yields (1.74Yp/s) compared to natural alginate. Palmitoylated alginate beads revealed 99% enantiomeric selectivity (ee) in production of l (+) lactic acid. Metabolite analysis during fermentation indicated low by-product (acetic acid, propionic acid and ethanol) formation on repeated batch fermentation with functionalized immobilized microbial cells. The scanning electron microscopic studies showed dense entrapped microbial cell biomass in modified immobilized beads compared to native alginate. Thus the methodology has great importance in large-scale production of optically pure lactic acid.     

Synergism among lactic acid, sulfite, pH and ethanol in alcoholic fermentation of Saccharomyces cerevisiae (PE-2 and M-26)

Summary The industrial production of ethanol is affected mainly by contamination by lactic acid bacteria besides others factors that act synergistically like increased sulfite content, extremely low pH, high acidity, high alcoholic content, high temperature and osmotic pressure. In this research two strains of Saccharomyces cerevisiae PE-2 and M-26 were tested regarding the alcoholic fermentation potential in highly stressed conditions. These strains were subjected to values up to 200 mg NaHSO₃ l⁻¹, 6 g lactic acid l⁻¹, 9.5% (w/v) ethanol and pH 3.6 during fermentative processes. The low pH (3.6) was the major stressing factor on yeasts during the fermentation. The M-26 strain produced higher acidity than the other, with higher production of succinic acid, an important inhibitor of lactic bacteria. Both strains of yeasts showed similar performance during the fermentation, with no significant difference in cell viability.     

d‐lactic acid production from renewable lignocellulosic biomass via genetically modified Lactobacillus plantarum

d ‐lactic acid is of great interest because of increasing demand for biobased poly‐lactic acid (PLA). Blending poly‐l ‐lactic acid with poly‐d ‐lactic acid greatly improves PLA's mechanical and physical properties. Corn stover and sorghum stalks treated with 1% sodium hydroxide were investigated as possible substrates for d ‐lactic acid production by both sequential saccharification and fermentation and simultaneous saccharification and cofermentation (SSCF). A commercial cellulase (Cellic CTec2) was used for hydrolysis of lignocellulosic biomass and an l ‐lactate‐deficient mutant strain Lactobacillus plantarum NCIMB 8826 ldhL1 and its derivative harboring a xylose assimilation plasmid (ΔldhL1‐pCU‐PxylAB) were used for fermentation. The SSCF process demonstrated the advantage of avoiding feedback inhibition of released sugars from lignocellulosic biomass, thus significantly improving d ‐lactic acid yield and productivity. d ‐lactic acid (27.3 g L^?1) and productivity (0.75 g L^?1 h^?1) was obtained from corn stover and d ‐lactic acid (22.0 g L^?1) and productivity (0.65 g L^?1 h^?1) was obtained from sorghum stalks using ΔldhL1‐pCU‐PxylAB via the SSCF process. The recombinant strain produced a higher concentration of d ‐lactic acid than the mutant strain by using the xylose present in lignocellulosic biomass. Our findings demonstrate the potential of using renewable lignocellulosic biomass as an alternative to conventional feedstocks with metabolically engineered lactic acid bacteria to produce d ‐lactic acid. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:271–278, 2016     

Use of inexpensive nitrogen sources and starch for L(+) lactic acid production in anaerobic submerged fermentation

L(+) Lactic acid fermentation was studied by Lactobacillus amylophilus GV6 under the influence of inexpensive nitrogen sources (red lentil-RL, and Baker's yeast cells-YC) and starch by response surface methodology (RSM). Central composite rotatable design (CCRD) was employed to determine maximum lactic acid production at optimum values for process variables RL, YC and incubation period (IP) and a satisfactory fit model was realized. Lactic acid production was significantly affected by RL and IP interactions as well as by independent variables RL and YC. Maximum lactic acid production of 13.5 g/15.2g starch was obtained with RL 0.8%, YC 1% and IP of 48 h, with 92% lactic acid yield efficiency (g lactic acid produced/g substrate utilized) and 40% increase (from 50 g to 92 g/100 g starch utilized) in lactic acid production. This is the first report on response optimization in direct fermentation of starch to lactic acid using inexpensive nitrogen sources substituting peptone and yeast extract in anaerobic submerged fermentation by amylolytic lactic acid bacteria (LAB).     

Effect of pH and lactic or acetic acid on ethanol productivity by Saccharomyces cerevisiae in corn mash

The effects of lactic and acetic acids on ethanol production by Saccharomyces cerevisiae in corn mash, as influenced by pH and dissolved solids concentration, were examined. The lactic and acetic acid concentrations utilized were 0, 0.5, 1.0, 2.0, 3.0 and 4.0% w/v, and 0, 0.1, 0.2, 0.4, 0.8 and 1.6% w/v, respectively. Corn mashes (20, 25 and 30% dry solids) were adjusted to the following pH levels after lactic or acetic acid addition: 4.0, 4.5, 5.0 or 5.5 prior to yeast inoculation. Lactic acid did not completely inhibit ethanol production by the yeast. However, lactic acid at 4% w/v decreased (P<0.05) final ethanol concentration in all mashes at all pH levels. In 30% solids mash set at pH ≤5, lactic acid at 3% w/v reduced (P<0.05) ethanol production. In contrast, inhibition by acetic acid increased as the concentration of solids in the mash increased and the pH of the medium declined. Ethanol production was completely inhibited in all mashes set at pH 4 in the presence of acetic acid at concentrations ≥0.8% w/v. In 30% solids mash set at pH 4, final ethanol levels decreased (P<0.01) with only 0.1% w/v acetic acid. These results suggest that the inhibitory effects of lactic acid and acetic acid on ethanol production in corn mash fermentation when set at a pH of 5.0–5.5 are not as great as that reported thus far using laboratory media.