Intraparticle concentration gradients for substrate and acidic product in immobilized cephalosporin C amidase and their dependencies on carrier characteristics and reaction parameters

Cephalosporin C amidase was covalently attached using a protein loading of 7.0–200 mg protein/g dry carrier on four epoxy‐activated Sepabeads differing in particle size and pore diameter. Initial‐rate kinetic analysis showed that for Sepabeads with small pore diameters (30–40 nm), the apparent K_M of the amidase for hydrolysis of cephalosporin C at 37°C and pH 8.0 increased ～3‐fold in response to increased particle size (～120–400 µm) and increased amount of immobilized enzyme (7.0–70 mg protein/g dry carrier) while maximum specific activity (3.2 U/mg protein; 25% of free amidase) was affected only by particle size. In contrast, for Sepabeads with wide pores (150–250 nm), the K_M was independent of the enzyme loading. Internal effectiveness factors calculated from observable Thiele modulus reflected the dependence of K_M on geometrical parameters of the particles. A new method for determination of the overall intraparticle pH was developed based on luminescence lifetime measurements in the frequency domain. Sepabeads were doubly labeled using a lipophilic variant of the pH‐sensitive dye fluorescein, and Ru(II) tris(4,7‐diphenyl‐1,10‐phenantroline) whose phosphorescence properties are independent of pH. Luminescent lifetime measurements of doubly labeled particle suspensions showed superior signal‐to‐noise ratio compared to fluorescence intensity‐based measurements using singly labeled particles. The difference at apparent steady state (ΔpH) between bulk (external pH) and intraparticle pH (internal pH) was as large as ～0.6 units. The ΔpH was dependent on substrate concentration, particle size, and pore diameter. Therefore, these results characterize the role of carrier characteristics and reaction parameters in the formation of concentration gradients for substrate and acidic product during hydrolysis of cephalosporin C by immobilized amidase. The strong pH dependence of the immobilized amidase underscores the importance of considering intraparticle pH gradients in the design of an efficient carrier‐bound biocatalyst. Biotechnol. Bioeng. 2010;106: 528–540. © 2010 Wiley Periodicals, Inc.     

Enhanced recombinant protein production and differential expression of molecular chaperones in sf-caspase-1-repressed stable cells after baculovirus infection

Background

Industrial-scale biocatalytic synthesis of fine chemicals occurs preferentially as continuous processes employing immobilized enzymes on insoluble porous carriers. Diffusional effects in these systems often create substrate and product concentration gradients between bulk liquid and the carrier. Moreover, some widely-used biotransformation processes induce changes in proton concentration. Unlike the bulk pH, which is usually controlled at a suitable value, the intraparticle pH of immobilized enzymes may deviate significantly from its activity and stability optima. The magnitude of the resulting pH gradient depends on the ratio of characteristic times for enzymatic reaction and on mass transfer (the latter is strongly influenced by geometrical features of the porous carrier). Design and selection of optimally performing enzyme immobilizates would therefore benefit largely from experimental studies of the intraparticle pH environment. Here, a simple and non-invasive method based on dual-lifetime referencing (DLR) for pH determination in immobilized enzymes is introduced. The technique is applicable to other systems in which particles are kept in suspension by agitation.

Results

The DLR method employs fluorescein as pH-sensitive luminophore and Ru(II) tris(4,7-diphenyl-1,10-phenantroline), abbreviated Ru(dpp), as the reference luminophore. Luminescence intensities of the two luminophores are converted into an overall phase shift suitable for pH determination in the range 5.0-8.0. Sepabeads EC-EP were labeled by physically incorporating lipophilic variants of the two luminophores into their polymeric matrix. These beads were employed as carriers for immobilization of cephalosporin C amidase (a model enzyme of industrial relevance). The luminophores did not interfere with the enzyme immobilization characteristics. Analytical intraparticle pH determination was optimized for sensitivity, reproducibility and signal stability under conditions of continuous measurement. During hydrolysis of cephalosporin C by the immobilizate in a stirred reactor with bulk pH maintained at 8.0, the intraparticle pH dropped initially by about 1 pH unit and gradually returned to the bulk pH, reflecting the depletion of substrate from solution. These results support measurement of intraparticle pH as a potential analytical processing tool for proton-forming/consuming biotransformations catalyzed by carrier-bound immobilized enzymes.

Conclusions

Fluorescein and Ru(dpp) constitute a useful pair of luminophores in by DLR-based intraparticle pH monitoring. The pH range accessible by the chosen DLR system overlaps favorably with the pH ranges at which enzymes are optimally active and stable. DLR removes the restriction of working with static immobilized enzyme particles, enabling suspensions of particles to be characterized also. The pH gradient developed between particle and bulk liquid during reaction steady state is an important carrier selection parameter for enzyme immobilization and optimization of biocatalytic conversion processes. Determination of this parameter was rendered possible by the presented DLR method.     

Immobilization/stabilization of acid urease on Eupergit® supports

The adsorption capacity and immobilization rate of two Eupergit® supports for acid urease was studied by varying the ionic strength and enzyme preparation concentration in the immobilizing solution at pH 7. Eupergit® C250 L yielded a series of derivatives with enzyme loadings (Y_P/B) ranging from 48 to 171 mg of bovine serum albumin equivalent (BSAE) per gram of dry support (ds). Use of drastic postimmobilization conditions at pH 9 for 3–9 days yielded a slight decrease (8–14%) in the initial activity of immobilized enzymes and a limited increase in the stabilization factor (1.1–1.5), as assessed by accelerated aging tests at 65°C. Further storage tests at 4°C in the wet state showed that the activity of several derivatives either stabilized or not was practically constant for as long as 547 days. Both free enzyme and immobilized acid urease derivatives exhibited a kinetic pattern of the Michaelis–Menten type. Using the Eadie–Hofstee diagram, the specific ammonia formation rate constant for free (k_cat) or immobilized (k′_cat) enzyme resulted to be little affected by immobilization (k_cat ≈ k′_cat ≈ 18.86 ± 0.34 IU/mg BSAE), whereas the apparent Michaelis constant for immobilized enzymes exhibited a statistically significant increase at P < 0.05 from the intrinsic value (2.55 ± 0.14 mM) for free enzyme to 5.38 ± 0.87 mM as Y_P/B increased to 171 mg BSAE/g ds. By estimating the observable Thiele modulus (?_obs), the activity of the biocatalyst with the greatest enzyme loading at the lowest urea concentrations tested (0.833 mM) was reduced by a factor of about 2 due to internal diffusional limitations. By operating in the pseudofirst‐order regime with immobilized derivatives at Y_P/B about 126 mg BSAE/g ds, their activity after grinding was no more limited by intraparticle diffusion and approached the value for free enzyme. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Application of Exchangeable Biochemical Reactors with Oxidase‐Catalase‐Co‐immobilizates and Immobilized Microorganisms in a Microfluidic Chip‐Calorimeter

Several methods for the quantitative detection of different compounds, e.g., L‐amino acids, sugars or alcohols in liquid media were developed by application of an automatic measuring unit including a fluid chip‐calorimeter FCC‐21. For this purpose, enzymes were immobilized covalently on the inner and outer surface of CPG (controlled porous glass)‐spherules with an outer diameter of 100 μm and filled into a micro flow‐through reaction chamber (V_R = 20 μL). The design of the measuring cell allows for easy insertion into the calorimeter device of a stored series of comfortably pre‐fabricated measuring cells. These cells can be filled with different enzyme immobilizates. Different oxidases were used and co‐immobilized with catalase for the improvement of the detection sensitivity. A signal amplification could be achieved up to a factor of 3.5 with this configuration. β‐D‐glucose, ethanol and L‐lysine could be detected in a range of 0.25–1.75 mM using glucose oxidase, alcohol oxidase and lysine oxidase. The group of oxidases in combination with the enzymatic catalysis of the intermediate H₂O₂ allows the quantitative detection of a large number of analytes. A good measurement and storage stability could be achieved for several weeks by this immobilization method. In addition to enzyme‐based detection reactions, it was shown that living microorganisms can be immobilized in the reaction chamber. Thus, the system can be used as a whole‐cell biosensor. The quantitative detection of phenol in the range of 10–100 μM could be performed using the actinomycete Rhodococcus sp. immobilized on glass beads by means of embedding into polymers.     

Transformation of rifamycin B with immobilized rifamycin oxidase of Curvularia lunata

Rifamycin oxidase of Curvularia lunata was immobilized on polyacrylamide gel. The optimum pH and temperature for immobilized enzyme reaction were 6.5 and 50 °C, respectively. Enzyme stability increased on immobilization and the half lives of immobilized enzyme preparations at 30 and 40 °C were 30 and 11.5 d, respectively. With 2.5 mm beads diffusional resistances were observed. Reusability studies showed that 1 mm size beads gave a higher rate of transformation in comparison with 2 or 2.5 mm beads.     

Immobilization of glucose oxidase and lactate dehydrogenase onto magnetic nanoparticles for bioprocess monitoring system

Glucose oxidase (GOD) and lactate dehydrogenase (LDH) were immobilized onto magnetic nanoparticles, viz. Fe₃O₄, via carbodiimide and glutaraldehyde. The immobilization efficiency was largely dependent upon the immobilization time and concentration of glutaraldehyde. The magnetic nanoparticles had a mean diameter of 9.3 nm and were superparamagnetic. The immobilization of GOD and LDH on the nanoparticles slightly decreased their saturation magnetization. However, the FT-IR spectra showed that GOD and LDH were immobilized onto the nanoparticles by different binding mechanisms, the reason for which was not well explained. The optimum pH values of the immobilized GOD and LDH were changed to 8 and 10, respectively. The free and immobilized enzyme kinetic parameters (K_m and V_max) were determined by Michaelis-Menten enzyme kinetics. The Km values for free and immobilized GOD were 0.168 and 0.324 mM, respectively, while those for free and immobilized LDH were 0.19 and 0.163 mM for NAD, and 2.976 and 4.785 mM for lactate, respectively. High operational stability was observed, with more than 80% of the initial enzyme activity being retained for the immobilized GOD up to 12 h and for the immobilized LDH up to 24 h. The immobilized GOD was applied to a sequential injection analysis system for the application of bioprocess monitoring.     

Effects of 1-aminocyclopropane-1-carboxylic acid and oxygen concentrations on in vivo and in vitro activity of ACC oxidase of sunflower hypocotyl segments

In vivo ethylene production by hypocotyl segments of sunflower seedlings and in vitro activity of 1-aminocyclopropane-1-carboxylic acid oxidase (formerly ethylene-forming enzyme) extacted from the same tissues increase with increasing concentrations of 1-aminocyclopropane-1-carboxylic acid (ACC) and oxygen. ACC oxidase activity follows Michaelis-Menten kinetics. The apparent Km values of the enzyme towards ACC, estimated in vivo and in vitro, are respectively 219 M and 20.6 M. Both Km values towards O₂ are similar, ca 10.6–11.4%. A decrease in concentration in one of the substrates (ACC or O₂) results in an increase in in vivo apparent Km of ACC oxidase for the other substrate. On the contrary, Km values of the enzyme towards ACC or O₂ estimated in vitro are not dependent upon the concentration of the other substrate (ACC or O₂).Abbreviations ACC 1-aminocyclopropane-1-carboxylic acid - EFE ethylene-forming enzyme - MACC malonylate 1-aminocyclopropane-1-carboxylic acid - SD standard deviation     

Stabilization of d-amino acid oxidase from Rhodosporidium toruloides by immobilization onto magnetic nanoparticles

d-Amino acid oxidase from Rhodosporidium toruloides was immobilized onto glutaraldehyde-activated magnetic nanoparticles. Approximately four enzyme molecules were attached to one magnetic nanoparticle when the weight ratio of the enzyme to the support was 0.12. After immobilization, the T _m was increased from 45°C of the free form to 55°C. In the presence of 20 mM H₂O₂, the immobilized form retained 93% of its activity after 5 h while the free form was completely inactivated after 3.5 h.     

Covalent Immobilization of Alcohol Dehydrogenase (ADH2) from Haloferax volcanii: How to Maximize Activity and Optimize Performance of Halophilic Enzymes

Alcohol dehydrogenase from halophilic archaeon Haloferax volcanii (HvADH2) was successfully covalently immobilized on metal-derivatized epoxy Sepabeads. The immobilization conditions were optimized by investigating several parameters that affect the halophilic enzyme–support interaction. The highest immobilization efficiency (100 %) and retention activity (60 %) were achieved after 48 h of incubation of the enzyme with Ni-epoxy Sepabeads support in 100 mM Tris–HCl buffer, pH 8, containing 3 M KCl at 5 °C. No significant stabilization was observed after blocking the unreacted epoxy groups with commonly used hydrophilic agents. A significant increase in the stability of the immobilized enzyme was achieved by blocking the unreacted epoxy groups with ethylamine. The immobilization process increased the enzyme stability, thermal activity, and organic solvents tolerance when compared to its soluble counterpart, indicating that the immobilization enhances the structural and conformational stability. One step purification–immobilization of this enzyme has been carried out on metal chelate-epoxy Sepabeads, as an efficient method to obtain immobilized biocatalyst directly from bacterial extracts.     

Immobilized xanthine oxidase: Kinetics, (in)stability,and stabilization by coimmobilization with superoxide dismutase and catalase

Milk xanthine oxidase was immobilized by covalent attachment to CNBr-activated Sepharose 4B and by adsorption to n-octylamine-substituted Sepharose 4B. The amounts of activity immobilized for the two preparations were 30 and 90%, respectively. The pH optima for free and adsorbed xanthine oxidase were at 8.6 and 8.2, respectively. Both free and immobilized xanthine oxidase show substrate inhibition. The apparent inhibition constant (K_i′) found for adsorbed xanthine oxidase with xanthine as substrate was higher than the K_i for the free enzyme, which was shown to be due to substrate diffusion limitation in the pores of the carrier beads (internal diffusion limitation). Higher substrate concentrations, as desirable for practical application in organic synthesis, can therefore be used with the immobilized enzyme without decreasing the rate. As a result of the internal diffusion limitation the apparent Michaelis constant (K_m′) for adsorbed xanthine oxidase was also higher than the K_m for the free enzyme. Immobilized xanthine oxidase was more stable than the free enzyme during storage at 4 and 30°C. Both forms rapidly lost activity during catalysis. The loss was proportional to the amount of substrate converted. Coimmobilization of xanthine oxidase with superoxide dismutase and catalase improved the operational stability, suggesting that O₂^? and H₂O₂ side-products of the enzymatic reaction were involved in the inactivation. Coimmobilization with albumin also had some stabilizing effect. Complete surrounding of xanthine oxidase by protein, however, by means of etrapment in a glutaraldehyde-crosslinked gelatin matrix, considerably enhanced the operational half-life. This system was less efficient than the Sepharose preparations either because much activity was lost during the immobilization procedure and/or because it had poor flow properties. Xanthine (15 mg)was converted by an adsorbed xanthine oxidase preparation and product (uric acid) was isolated in high yield (84%).     

Inactivation of nitric oxide by cytochrome c oxidase under steady-state oxygen conditions

We have developed a respiration chamber that allows intact cells to be studied under controlled oxygen (O₂) conditions. The system measures the concentrations of O₂ and nitric oxide (NO) in the cell suspension, while the redox state of cytochrome c oxidase is continuously monitored optically. Using human embryonic kidney cells transfected with a tetracycline-inducible NO synthase we show that the inactivation of NO by cytochrome c oxidase is dependent on both O₂ concentration and electron turnover of the enzyme. At a high O₂ concentration (70 μM), and while the enzyme is in turnover, NO generated by the NO synthase upon addition of a given concentration of l-arginine is partially inactivated by cytochrome c oxidase and does not affect the redox state of the enzyme or consumption of O₂. At low O₂ (15 μM), when the cytochrome c oxidase is more reduced, inactivation of NO is decreased. In addition, the NO that is not inactivated inhibits the cytochrome c oxidase, further reducing the enzyme and lowering O₂ consumption. At both high and low O₂ concentrations the inactivation of NO is decreased when sodium azide is used to inhibit cytochrome c oxidase and decrease electron turnover.     

Immobilization of glucose isomerase to ion-exchange materials

Glucose isomerase (D -xylose ketol-isomerase EC 5.3.1.5) from Bacillus Coagulans was partially purified and immobilized by adsorption to anion exchangers. The highest activities were obtained when the enzyme was adsorbed to DEAE-cellulose. On immobilization to DEAE-cellulose the measured optimum pH value for enzyme activity shifted from 7.2 to 6.8. There was no appreciable difference between the heat stabilities of soluble and immobilized enzyme. The K_{m app} values for the immobilized enzyme were found to be 0.25M in the presence of 0.01M Mg²⁺ and 0.19M with 0.005M Mg²⁺, while those enzyme were 0.11 and 0.17M, re spectively. Under conditions of contimuous of D -glucose, a decrease of activity with time was observed, but this decrease was less at a low Mg²⁺ concentration and was affected by column geometry. There were no appreciable diffusional limitation effects in packed-bed columns.     

Kinetic and microstructural characterization of immobilized penicillin acylase from Streptomyces lavendulae on Sepabeads EC-EP

Recombinant penicillin acylase from Streptomyces lavendulae was covalently bound to epoxy-activated Sepabeads EC-EP303®. Optimization of the immobilization process led to a homogeneous distribution of the enzyme on the support surface avoiding the attachment of enzyme aggregates, as shown by confocal electron microscopy. The optimal immobilized biocatalyst had a specific enzymatic activity of 26.2IUgwetcarrier^?1 in the hydrolysis of penicillin V at pH 8.0 and 40°C. This biocatalyst showed the highest activity at pH 8.5 and 65°C, 1.5 pH units lower and 5°C higher than its soluble counterpart. Substrate specificity of the derivative also showed its ability to efficiently hydrolyze other natural aliphatic penicillins such as penicillins K, F and dihydroF. The immobilized enzyme was highly stable at 40°C and pH 8.0 (t_1/2=625 h vs. t_1/2=397 h for the soluble enzyme), and it could be recycled for at least 30 consecutive batch reactions without loss of catalytic activity.     

Co-immobilization of manganese peroxidase from Phlebia radiata and glucose oxidase from Aspergillus niger on porous silica beads

Manganese peroxidase (MnP) from Phlebia radiata and glucose oxidase from Aspergillus niger were co-immobilized on porous silica beads. Immobilization of both enzymes on the same carrier provided an integrated system in which H₂O₂ required by MnP was produced by glucose oxidase. The immobilization process resulted in a decrease of both enzymatic activities and substrate affinities. However, immobilization improved the stability of MnP against H₂O₂ or high pH, as well as the storage stability of this enzyme.     

Practical application of different enzymes immobilized on sepabeads

The immobilization of an endoglucanase, benzoylformate decarboxylase (BFD) from Pseudomonas putida, as well as of lipase B from Candida antarctica (CALB) onto the carrier supports Sepabeads EC-EP, Sepabeads EC-EA, and Sepabeads EC-BU was accomplished. It is shown that via these immobilized biocatalysts the synthesis of both fine and bulk chemicals is possible. This is illustrated by the syntheses of polyglycerol esters and (S)-hydroxy phenyl propanone. The benefit of immobilization is illustrated by repetitive use in a bubble column reactor as well as in a stirred tank reactor. High stability of two biocatalysts was achieved and reusability up to eight times was demonstrated. The comparison of CALB immobilized on Sepabeads EC-EP to Novozym 435 shows similar activity. Dedicated to Prof. Dr. Christian Wandrey on the occasion of his 65th birthday.     

Microwave‐assisted covalent immobilization of enzymes on inorganic surfaces

Enzymes on carriers can be easily recycled or used in fixed bed reactors. The immobilization often results in an improved stability. Depending on the support used and the method of coupling, this is a time‐consuming process. While the wide applicability of microwaves (MWs) within organic synthesis is known since the 1980s, proteins (including enzymes) are generally considered as too sensitive toward MW irradiation. In this article, MW methods were investigated to improve the processing speed of covalent enzyme immobilization on inorganic supports. Herein two laccases from Trametes versicolor and Myceliophthora thermophilia (Novozyme 51003®) and the glucose oxidase from Aspergillus niger were immobilized onto samples of ceramic honeycomb and porous glass (TRISOPERL® 1000 AMINO). The enzymes showed different sensitivity to MW irradiation, but all were suitable for MW‐assisted immobilization. Subsequent stability tests were conducted to compare conventional immobilization methods with those with MW irradiation. The glucose oxidase provided the best results. For all cases, a successful MW irradiation assisted covalent enzyme immobilization on solid support was obtained with a total 20‐fold reduction of the time necessary.     

Novel polymeric microspheres: Synthesis,enzyme immobilization,antimutagenic activity,and antimicrobial evaluation against pathogenic microorganisms

New polymeric microspheres containing azomethine ( 1a ‐ 1c and 2a ‐ 2c ) were synthesized by condensation to compare the enzymatic properties of the enzyme glucose oxidase (GOx) and to investigate antimutagenic and antimicrobial activities. The polymeric microspheres were characterized by elemental analysis, infrared spectra (FT‐IR), proton nuclear magnetic resonance spectra, thermal gravimetric analysis, and scanning electron microscopy analysis. The catalytic activity of the glucose oxidase enzyme follows Michaelis‐Menten kinetics. Influence of temperature, reusability, and storage capacity of the free and immobilized glucose oxidase enzyme were investigated. It is determined that immobilized enzymes exhibit good storage stability and reusability. After immobilization of GOx in polymeric supports, the thermal stability of the enzyme increased and the maximum reaction rate (V_max) decreased. The activity of the immobilized enzymes was preserved even after 5 months. The antibacterial and antifungal activity of the polymeric microspheres were evaluated by well‐diffusion method against some selected pathogenic microorganisms. The antimutagenic properties of all compounds were also examined against sodium azide in human lymphocyte cells by micronuclei and sister chromatid exchange tests.     

Novel and efficient method for immobilization and stabilization of β-d-galactosidase by covalent attachment onto magnetic Fe3O4–chitosan nanoparticles

A novel and efficient immobilization of β-d-galactosidase from Aspergillus oryzae has been developed by using magnetic Fe₃O₄–chitosan (Fe₃O₄–CS) nanoparticles as support. The magnetic Fe₃O₄–CS nanoparticles were prepared by electrostatic adsorption of chitosan onto the surface of Fe₃O₄ nanoparticles made through co-precipitation of Fe²⁺ and Fe³⁺. The resultant material was characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. β-d-Galactosidase was covalently immobilized onto the nanocomposites using glutaraldehyde as activating agent. The immobilization process was optimized by examining immobilized time, cross-linking time, enzyme concentration, glutaraldehyde concentration, the initial pH values of glutaraldehyde and the enzyme solution. As a result, the immobilized enzyme presented a higher storage, pH and thermal stability than the soluble enzyme. Galactooligosaccharide was formed with lactose as substrate by using the immobilized enzyme as biocatalyst, and a maximum yield of 15.5% (w/v) was achieved when about 50% lactose was hydrolyzed. Hence, the magnetic Fe₃O₄–chitosan nanoparticles are proved to be an effective support for the immobilization of β-d-galactosidase.     

Light‐dependent oxygen consumption in nitrogen‐fixing cyanobacteria plays a key role in nitrogenase protection1

All colonial diazotrophic cyanobacteria are capable of simultaneously evolving O₂ through oxygenic photosynthesis and fixing nitrogen via nitrogenase. Since nitrogenase is irreversibly inactivated by O₂, accommodation of the two metabolic pathways has led to biochemical and/or structural adaptations that protect the enzyme from O₂. In some species, differentiated cells (heterocysts) are produced within the filaments. PSII is absent in the heterocysts, while PSI activity is maintained. In other, nonheterocystous species, however, a “division of labor” occurs whereby individual cells within a colony appear to ephemerally fix nitrogen while others evolve oxygen. Using membrane inlet mass spectrometry (MIMS) in conjunction with tracer ¹⁸O₂ and inhibitors of photosynthetic and respiratory electron transport, we examined the light dependence of O₂ consumption in Trichodesmium sp. IMS 101, a nonheterocystous, colonial cyanobacterium, and Anabaena flos‐aquae (Lyngb.) Bréb. ex Bornet et Flahault, a heterocystous species. Our results indicate that in both species, intracellular O₂ concentrations are maintained at low levels by the light‐dependent reduction of oxygen via the Mehler reaction. In N₂‐fixing Trichodesmium colonies, Mehler activity can consume ～75% of gross O₂ production, while in Trichodesmium utilizing nitrate, Mehler activity declines and consumes ～10% of gross O₂ production. Moreover, evidence for the coupling between N₂ fixation and Mehler activity was observed in purified heterocysts of Anabaena, where light accelerated O₂ consumption by 3‐fold. Our results suggest that a major role for PSI in N₂‐fixing cyanobacteria is to effectively act as a photon‐catalyzed oxidase, consuming O₂ through pseudocyclic electron transport while simultaneously supplying ATP in both heterocystous and nonheterocystous taxa.     

Immobilization of glucoamylase and glucose oxidase in activated carbon: effects of particle size and immobilization conditions on enzyme activity and effectiveness

Glucoamylase and glucose oxidase have been immobilized on carbodiimide-treated activated carbon particles of various sizes. Loading data indicate nonuniform distribution of immobilized enzyme within the porous support particles. Catalysts with different enzyme loading and overall activities have been prepared by varying enzyme concentration in the immobilizing solution. Analysis of these results by a new method based entirely upon experimentally observable catalyst properties indicates that intrinsic catalytic activity is reduced by immobilization of both enzymes. Immobilized glucoamylase intrinsic activity decreases with increasing enzyme loading, and similar behavior is suggested by immobilized glucose oxidase data analysis. The overall activity data interpretation method should prove useful in other immobilized enzyme characterization research, especially in situations where the intraparticle distribution of immobilized enzyme is nonuniform and unknown.