Enhanced electrochemiluminescence from reduced graphene oxide–CdTe quantum dots for highly selective determination of copper ion

An electrochemiluminescence (ECL) sensor based on reduced graphene oxide–CdTe quantum dots (RGO–CdTe QDs) composites for detecting copper ion (Cu²⁺) was proposed. The ECL behaviours of the RGO–CdTe QD modified electrode were investigated with H₂O₂ as the co‐reactant. Quantitative detection of Cu²⁺ was realized as Cu²⁺ could effectively quench the ECL signal of the RGO–CdTe QDs. A wide linear range of 1.00 × 10^?14 to 1.00 × 10^?4 M (R = 0.9953) was obtained under optimized conditions, and a detection limit (S/N = 3) was achieved of as low as 3.33 × 10^?15 M. The proposed sensor also exhibited good stability and selectivity for the detection of copper ions. Finally, the analytical application of the proposed sensor was also evaluated using river water.     

The behaviors of metal ions in the CdTe quantum dots–H2O2 chemiluminescence reaction and its sensing application

The behaviors of 15 kinds of metal ions in the thiol‐capped CdTe quantum dots (QDs)–H₂O₂ chemiluminescence (CL) reaction were investigated in detail. The results showed that Ag⁺, Cu²⁺ and Hg²⁺ could inhibit CdTe QDs and H₂O₂ CL reaction. A novel CL method for the selective determination of Ag⁺, Cu²⁺ and Hg²⁺ was developed, based on their inhibition of the reaction of CdTe QDs and H₂O₂. Under the optimal conditions, good linear relationships were realized between the CL intensity and the logarithm of concentrations of Ag⁺, Cu²⁺ and Hg²⁺. The linear ranges were from 2.0 × 10^?6 to 5.0 × 10^?8 mol L^?1 for Ag⁺, from 5.0 × 10^?6 to 7.0 × 10^?8 mol L^?1 for Cu²⁺ and from 2.0 × 10^?5 to 1.0 × 10^?7 mol L^?1 for Hg²⁺, respectively. The limits of detection (S/N = 3) were 3.0 × 10^?8, 4.0 × 10^?8 and 6.7 × 10^?8 mol L^?1 for Ag⁺, Cu²⁺ and Hg²⁺, respectively. A possible mechanism for the inhibition of CdTe QDs and H₂O₂ CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Core–shell structured CdTe/CdS@SiO2@CdTe@SiO2 composite fluorescent spheres: Synthesis and application for Cd2+ detection

Core–shell structured quantum dot (QD)–silica fluorescent nanoparticles have attracted a great deal of attention due to the excellent optical properties of QDs and the stability of silica. In this study, core–shell structured CdTe/CdS@SiO₂@CdTe@SiO₂ fluorescent nanospheres were synthesized based on the Stöber method using multistep silica encapsulation. The second silica layer on the CdTe QDs maintained the optical stability of nanospheres and decreased adverse influences on the probe during subsequent processing. Red‐emissive CdTe/CdS QDs (630 nm) were used as a built‐in reference signal and green‐emissive CdTe QDs (550 nm) were used as a responding probe. The fluorescence of CdTe QDs was greatly quenched by added S^2?, owing to a S^2?‐induced change in the CdTe QDs surface state in the shell. Upon addition of Cd²⁺ to the S^2?‐quenched CdTe/CdS@SiO₂@CdTe@SiO₂ system, the responding signal at 550 nm was dramatically restored, whereas the emission at 630 nm remained almost unchanged; this response could be used as a ratiometric ‘off–on’ fluorescent probe for the detection of Cd²⁺. The sensing mechanism was suggested to be: the newly formed CdS‐like cluster with a higher band gap facilitated exciton/hole recombination and effectively enhanced the fluorescence of the CdTe QDs. The proposed probe shows a highly sensitive and selective response to Cd²⁺ and has potential application in the detection of Cd²⁺ in environmental or biological samples.     

Turn‐off–on chemiluminescence determination of cyanide

A flow injection chemiluminescence (FI–CL) method was developed for the determination of cyanide (CN⁻) based on the recovered CL signal by Cu²⁺ inhibiting a glutathione (GSH)‐capped CdTe quantum dot (QD) and hydrogen peroxide system. In an alkaline medium, strong CL signals were observed from the reaction of CdTe QDs and H₂O₂, and addition of Cu²⁺ could cause significant CL inhibition of the CdTe QDs–H₂O₂ system. In the presence of CN⁻, Cu²⁺ can be removed from the surface of CdTe QDs via the formation of particularly stable [Cu(CN)_n]^(n‐1)– species, and the CL signal of the CdTe QDs–H₂O₂ system was efficiently recovered. Thus, the CL signals of CdTe QDs–H₂O₂ system were turned off and turned on by the addition of Cu²⁺ and CN⁻, respectively. Further, the results showed that among the tested ions, only CN⁻ could recover the CL signal, which suggested that the CdTe QDs–H₂O₂–Cu²⁺ CL system had highly selectivity for CN⁻. Under optimum conditions, the CL intensity and the concentration of CN⁻ show a good linear relationship in the range 0.0–650.0 ng/mL (R² = 0.9996). The limit of detection for CN⁻ was 6.0 ng/mL (3σ). This method has been applied to detect CN⁻ in river water and industrial wastewater with satisfactory results. Copyright © 2014 John Wiley & Sons, Ltd.     

H2O2‐ and pH‐sensitive CdTe quantum dots as fluorescence probes for the detection of glucose

A novel fluorescence assay system for glucose was developed with thioglycollic acid (TGA)‐capped CdTe quantum dots (QDs) as probes. The luminescence quantum yield of the TGA‐capped CdTe QDs was highly sensitive to H₂O₂ and pH. In the presence of glucose oxidase, glucose is oxidized to yield, gluconic acid and H₂O₂. H₂O₂ and H⁺ (dissociated from gluconic acid) intensively quenched the fluorescence of QDs. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 0.01–5.0 mm under optimized experimental conditions. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, high flexibility, and good sensitivity. Furthermore, no complicated chemical modification of QDs and enzyme immobilization was needed in this system. Copyright © 2012 John Wiley & Sons, Ltd.     

Aqueous synthesis of highly luminescent surface Mn2+‐doped CdTe quantum dots as a potential multimodal agent

Mn²⁺‐doped CdTe quantum dots (QDs) were synthesized directly via a facile surface doping strategy in aqueous solution. The best optical property emerged when the added amount of Mn²⁺ was 5% compared to Cd²⁺ in the CdTe nanoparticles and the reaction temperature was 60 °C. The fluorescence and magnetic properties of the QDs were studied. The as‐prepared Mn²⁺‐doped CdTe QDs have high quantum yield (48.13%) and a narrow distribution with an average diameter of 3.7 nm. The utility of biological imaging was also studied. Depending on the high quantum yield, cells in culture were illuminated and made more distinct from each other compared to results obtained with normal QDs. They also have a prominent longitudinal relaxivity value (r₁ = 4.2 mM^?1s^?1), which could indicate that the Mn²⁺‐doped CdTe QDs can be used as a potential multimodal agent for fluorescence and magnetic resonance imaging. Copyright © 2014 John Wiley & Sons, Ltd.     

Cathodic electrochemiluminescence of the peroxydisulphate–ciprofloxacin system and its analytical applications

The cathodic electrochemiluminescence (ECL) of peroxydisulphate (S₂O₈^2?)–ciprofloxacin (CPF) system at a wax‐impregnated graphite electrode was studied. When CPF was absent, S₂O₈^2? was electrochemically reduced to sulphate free radical (SO₄^??), and dissolved oxygen absorbed on the electrode surface was reduced to protonated superoxide anion radical (HO₂^?). The HO₂^? was oxidized by SO₄^?? to produce molecular oxygen in both singlet and triplet states. Some of the singlet molecular oxygen (¹O₂) further combined through collision to be an energy‐rich precursor singlet molecular oxygen pair (¹O₂)₂. A weak ECL was produced when ¹O₂ or (¹O₂)₂ was converted to ground‐state molecular oxygen (³O₂). When CPF was present, a stronger ECL was produced, which originated from two emitting species. The main emitting species was excited state CPF (CPF*), which was produced by accepting energy from (¹O₂)₂. The other emitting species was excited singlet molecular oxygen pair [(¹O₂)₂*], which originated from the chemical oxidation of CPF by SO₄^?? and dissolved oxygen. Based on the stronger ECL phenomenon, an ECL method for the determination of either S₂O₈^2? or CPF was proposed. The proposed ECL method has been applied to the determination of CPF in pharmaceutical preparations. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence of the luminol–potassium periodate system enhanced by TGA–capped CdTe quantum dots for the determination of theophylline

The chemiluminescence (CL) behaviour of the luminol–potassium periodate system enhanced by CdTe quantum dots capped with thioglycolic acid (TGA–CdTe QDs) was studied using kinetic experiments, CL spectra, UV–vis absorption spectra and fluorescence spectra. The production of oxygen‐containing reactant intermediates (O₂^?? and OH^?) in the present CL system was verified by CL. The possible CL mechanism was discussed in detail. Furthermore, theophylline (THP) was determined based on its enhancement of the CL intensity of the CdTe QDs–luminol–potassium periodate system coupled with a flow‐injection technique. Under these optimized conditions, the linear range was found to be from 1.0 × 10^?8 to 1.0 × 10^?5 g/mL with a detection limit of 2.8 × 10^?9 g/mL (3σ). The recoveries for the determination of THP in tablets were from 98.2 to 99.6%.     

Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries

Searching for a new material to build the next‐generation rechargeable lithium‐ion batteries (LIBs) with high electrochemical performance is urgently required. Owing to the low‐cost, non‐toxicity, and high‐safety, the family of manganese oxide including the Na‐Mn‐O system is regarded as one of the most promising electrode materials for LIBs. Herein, a new strategy is carried out to prepare a highly porous and electrochemically active Na_0.55Mn₂O₄·1.5H₂O (SMOH) compound. As an anode material, the Na‐Mn‐O nanocrystal material dispersed within a carbon matrix manifests a high reversible capacity of 1015.5 mA h g^?1 at a current density of 0.1 A g^?1. Remarkably, a considerable capability of 546.8 mA h g^?1 remains even after 2000 discharge/charge cycles at the higher current density of 4 A g^?1, indicating a splendid cyclability. The exceptional electrochemical properties allow SMOH to be a promising anode material toward LIBs.     

d‐penicillamine capped cadmium telluride quantum dots as a novel fluorometric sensor of copper(II)

d ‐penicillamine‐capped cadmium telluride quantum dots (DPA‐capped CdTe QDs) were synthesized as the new fluorescent semiconductor nanocrystal in aqueous solution. Fourier transmission infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, ultraviolet‐visible and photoluminescence spectroscopy were used for characterization of the QDs. Based on the quenching effect of Cu²⁺ ions on the fluorescence intensity of DPA‐capped CdTe QDs, a new fluorometric sensor for copper(II) detection was developed that showed good linearity over the concentration range 5 × 10^–9–3 × 10^–6 m with the detection limit 0.4 × 10^–9 m . Owing to the strong affinity of the DPA to copper(II), the sensor showed appropriate selectivity for copper(II) compared with conventional QDs. The DPA‐capped CdTe QDs was successfully applied for determination of Cu²⁺ concentration in river, well and tap waters with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Realizing Reversible Conversion‐Alloying of Sb(V) in Polyantimonic Acid for Fast and Durable Lithium‐ and Potassium‐Ion Storage

Finding suitable electrode materials for alkali‐metal‐ion storage is vital to the next‐generation energy‐storage technologies. Polyantimonic acid (PAA, H₂Sb₂O₆ · nH₂O), having pentavalent antimony species and an interconnected tunnel‐like pyrochlore crystal framework, is a promising high‐capacity energy‐storage material. Fabricating electrochemically reversible PAA electrode materials for alkali‐metal‐ion storage is a challenge and has never been reported due to the extremely poor intrinsic electronic conductivity of PAA associated with the highest oxidation state Sb(V). Combining nanostructure engineering with a conductive‐network construction strategy, here is reported a facile one‐pot synthesis protocol for crafting uniform internal‐void‐containing PAA nano‐octahedra in a composite with nitrogen‐doped reduced graphene oxide nanosheets (PAA?N‐RGO), and for the first time, realizing the reversible storage of both Li⁺ and K⁺ ions in PAA?N‐RGO. Such an architecture, as validated by theoretical calculations and ex/in situ experiments, not only fully takes advantage of the large‐sized tunnel transport pathways (0.37 nm²) of PAA for fast solid‐phase ionic diffusion but also leads to exponentially increased electrical conductivity (3.3 S cm^?1 in PAA?N‐RGO vs 4.8 × 10^?10 S cm^?1 in bare‐PAA) and yields an inside‐out buffer function for accommodating volume expansion. Compared to electrochemically irreversible bare‐PAA, PAA?N‐RGO manifests reversible conversion‐alloying of Sb(V) toward fast and durable Li⁺‐ and K⁺‐ion storage.     

One‐pot synthesis and characterization CdTe:Zn2+ quantum dots and its molecular interaction with calf thymus DNA

Tremendous research efforts have been dedicated to fabricating high‐quality Zn‐doped CdTe quantum dots (QDs) for any potential biomedical applications. In particular, the correlation of issues regarding how QDs interact with DNA is of greatest importance. Herein, a pH‐responsive study of the interactions between CdTe:Zn²⁺ quantum dots with 4 different sizes and calf thymus DNA (ctDNA) was conducted using multispectroscopic techniques and electrochemical investigation. Fluorescence studies revealed that this interaction process is predominantly a static process and groove binding was the main binding mode for CdTe:Zn²⁺ QDs to ctDNA. The calculated negative values of enthalpy (?45.06 kJ mol^?1) and entropy (?133.62 J mol^?1 K^?1) with temperature changes indicated that the hydrogen bonds and van der Waals interactions played major roles in the reaction. Furthermore, circular dichroism spectroscopy and Fourier transform infrared spectrometry analyses indicate that the normal conformation of ctDNA is discombobulated by CdTe:Zn²⁺ QDs. In addition, the electrochemical behavior of the affinity of CdTe:Zn²⁺ QDs for ctDNA agreed well with the results obtained from fluorescence experiments. This study might be meaningful for understanding the molecular binding mechanism of QDs for DNA and provides a basis for QD‐labeled systems.     

Electrochemiluminescence detection of methamphetamine based on a Ru(bpy)32+‐doped silica nanoparticles/Nafion composite film modified electrode

An electrochemiluminescence (ECL) approach for methamphetamine determination was developed based on a glassy carbon electrode modified with a Ru(bpy)₃²⁺‐doped silica nanoparticles/Nafion composite film. The monodispersed nanoparticles, which were about 50 nm in size, were synthesized using the water‐in‐oil microemulsion method. The ECL results revealed that Ru(bpy)₃²⁺ doped in silica nanoparticles retained its original photo‐ and electrochemical properties. The ECL intensity was found to be proportional to methamphetamine concentration over the range from 1.0 × 10^?7 to 1.0 × 10^?5 mol L^?1, and the detection limit was found to be 2.6 × 10^?8 mol L^?1. The proposed ECL approach was used to analyze the methamphetamine content in drugs. Copyright © 2009 John Wiley & Sons, Ltd.     

Scavenging of reactive oxygen species by N‐substituted indole‐2 and 3‐carboxamides

Indole‐2 and 3‐carboxamides (IDs) are proposed to be selective cyclooxygenase inhibitors. Since cyclooxygenase‐1 may be involved in reactive oxygen species (ROS) production, we hypothesize that these indole derivatives have antioxidative properties. We have employed chemiluminescence (CL) and electron spin resonance (ESR) spin trapping to examine this hypothesis. We report here the results of a study of reactivity of 10 selected indole derivatives towards ROS. The following generators of ROS were applied: potassium superoxide (KO₂) as a source of superoxide radicals (O₂^·?), the Fenton reaction (Co‐EDTA/H₂O₂) for hydroxyl radicals (HO^·), and a mixture of alkaline aqueous H₂O₂ and acetonitrile for singlet oxygen (¹O₂). Hydroxyl radicals were detected as 5,5‐dimethyl‐1‐pyrroline‐N‐oxide (DMPO) spin adduct, whereas 2,2,6,6‐tetramethyl‐piperidine (TEMP) was used as a detector of ¹O₂. Using the Fenton reaction, 0.5 mmol/L IDs were found to inhibit DMPO‐?H radical formation in the range 7–37%. Furthermore the tested compounds containing the thiazolyl group also inhibited the ¹O₂‐dependent TEMPO radical, generated in the acetonitrile + H₂O₂ system. About 20% inhibition was obtained in the presence of 0.5 mmol/L IDs. 1 mmol/L IDs caused an approximately 13–70% decrease in the CL sum from the O₂^·? generating system (1 mmol/L). The aim of this paper is to evaluate these indole derivatives as antioxidants and their abilities to scavenge ROS. Copyright © 2004 John Wiley & Sons, Ltd.     

Highly luminescent S,N co‐doped carbon quantum dots‐sensitized chemiluminescence on luminol–H2O2 system for the determination of ranitidine

S,N co‐doped carbon quantum dots (N,S‐CQDs) with super high quantum yield (79%) were prepared by the hydrothermal method and characterized by transmission electron microscopy, photoluminescence, UV–Vis spectroscopy and Fourier transformed infrared spectroscopy. N,S‐CQDs can enhance the chemiluminescence intensity of a luminol–H₂O₂ system. The possible mechanism of the luminol–H₂O₂–(N,S‐CQDs) was illustrated by using chemiluminescence, photoluminescence and ultraviolet analysis. Ranitidine can quench the chemiluminescence intensity of a luminol–H₂O₂–N,S‐CQDs system. So, a novel flow‐injection chemiluminescence method was designed to determine ranitidine within a linear range of 0.5–50 μg ml^?1 and a detection limit of 0.12 μg ml^?1. The method shows promising application prospects.     

Highly luminescent hybrid SiO2‐coated CdTe quantum dots: synthesis and properties

Novel hybrid SiO₂‐coated CdTe quantum dots (QDs) were created using CdTe QDs coated with a hybrid SiO₂ shell containing Cd²⁺ ions and a sulfur source via a sol–gel process in aqueous solution. Aqueous CdTe QDs with tunable emitting color created through a reaction between cadmium chloride and sodium hydrogen telluride was used as cores for the preparation of hybrid SiO₂‐coated CdTe QDs. In our experiments we found that the surface state of the cores and preparation conditions that affect the formation of the hybrid SiO₂ shell also greatly affect photoluminescence of the hybrid SiO₂‐coated CdTe QDs. The generation of CdS‐like clusters in the vicinity of the CdTe QDs, caused the quantum size effect of the QDs to be greatly reduced, which changes photoluminescence properties of the hybrid QDs fundamentally. Namely, the novel hybrid SiO₂ shell played an important role in generating a series of specific optical properties. In addition, the novel hybrid SiO₂ shell can be created if no CdTe QD is added. In order to gain an insight into the inter structure of the hybrid shell, we characterized the hybrid SiO₂‐coated CdTe QDs using X‐ray diffraction analysis and discuss the formation mechanism of such a hybrid structure. This work is significant because the novel hybrid SiO₂‐coated CdTe QDs with its excellent properties can be used in many applications, such as biolabeling and optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

A simple and sensitive label‐free fluorescence sensing of heparin based on Cdte quantum dots

A rapid, simple and sensitive label‐free fluorescence method was developed for the determination of trace amounts of an important drug, heparin. This new method was based on water‐soluble glutathione‐capped CdTe quantum dots (CdTe QDs) as the luminescent probe. CdTe QDs were prepared according to the published protocol and the sizes of these nanoparticles were verified through transmission electron microscopy (TEM), X‐ray diffraction (XRD) and dynamic light scattering (DLS) with an average particle size of about 7 nm. The fluorescence intensity of glutathione‐capped CdTe QDs increased with increasing heparin concentration. These changes were followed as the analytical signal. Effective variables such as pH, QD concentration and incubation time were optimized. At the optimum conditions, with this optical method, heparin could be measured within the range 10.0–200.0 ng mL^?1 with a low limit of detection, 2.0 ng mL^?1. The constructed fluorescence sensor was also applied successfully for the determination of heparin in human serum. Copyright © 2015 John Wiley & Sons, Ltd.     

µ‐Graphene Crosslinked CsPbI3 Quantum Dots for High Efficiency Solar Cells with Much Improved Stability

All‐inorganic perovskite CsPbI₃ quantum dots (QDs) offer much better stability for photovoltaic applications. Unfortunately, their cell efficiencies are hindered by the low carrier transport efficiency of QD‐assembled films. In addition, agglomeration‐induced phase change of QDs poses another problem for material and device degradation. Herein, the use of µ‐graphene (µGR) to crosslink QDs to form µGR/CsPbI₃ film is demonstrated. It is found that the resultant QDs film provides not only an effective channel for carrier transport, as witnessed by much improved conductivity but also significantly better stability against moisture, humidity, and high temperature stresses. The µGR/CsPbI₃ based solar cell shows increased device performance. More specifically, compared to the solar cell without the µGR treatment, V_OC is improved to 1.18 from 1.16 V, J_SC to 13.59 from 13.17 mA cm^?2, and FF to 72.6 from 68.1%, and overall power conversion efficiency to as high as 11.40 from 10.41%, a 12% increase. In addition, the instability originating from the thermal/moisture‐induced QD agglomeration is also greatly suppressed by the µGR crosslinking. The optimized device retains >98% of its initial efficiency after being stored in N₂ atmosphere for one month. Importantly, under 60% humidity and 100 °C thermal stresses, the µGR/CsPbI₃ devices show much better stability.