A new pair of M13 vectors for selecting either DNA strand of double-digest restriction fragments

The strategy of shotgun cloning with M13 is based on obtaining random fragments used for the rapid accumulation of sequence data. A strategy, however, is sometimes needed for obtaining subcloned sequences preferentially out of a mixture of fragments. Shotgun sequencing experiments have shown that not all DNA fragments are obtained with the same frequency and that the redundant information increases during the last third of a sequencing project. In addition, experiments have shown that particular fragments are obtained more frequently in one orientation, allowing the use of only one of the two DNA strands as a template for M13 shotgun sequencing. Two new M13 vectors, M13mp8 and M13mp9, have been constructed that permit the cloning of the same restriction fragment in both possible orientations. Consequently, each of the two strands becomes a (+) strand in a pair of vectors. The fragments to be cloned are cleaved with two restriction enzymes to produce a fragment with two different ends. The insertion of such a fragment into the vector can occur only in one orientation. Since M13mp8 and M13mp9 have their array of cloning sites in an antiparallel order, either orientation for inserting a double-digest fragment can be selected by the choice of the vector.     

New versatile cloning and sequencing vectors based on bacteriophage M13

A new pair of cloning and sequencing vectors based on bacteriophage M13mp7 has been developed. These vectors (M13tg130 and M13tg131) contain, in addition to the EcoRI, BamHI, HindIII, SmaI, SalI and PstI sites present in other vectors [cf., M13mp8 and M13mp9, Messing and Vieira, Gene 19 (1982) 269-276], unique restriction recognition sequences for the enzymes EcoRV, KpnI, SphI, SstI and XbaI. A restriction site for the enzyme BglII has been incorporated into the polylinker region of one of the vector pair to permit rapid discrimination between the two vectors.     

EcoK selection vectors for shotgun cloning into M13 and deletion mutagenesis.

For shotgun cloning into M13 vectors, a double-stranded cassette of synthetic oligonucleotides containing a SmaI site within the two halves of an EcoK site, has been introduced into the vector M13mp8. Cloning of blunt end DNA into the SmaI site destroys the EcoK site, and recombinants are therefore preferentially selected on transfection into a K strain of E.coli. For deletion mutagenesis using synthetic oligonucleotides, an M13 vector with four copies of the EcoK cassette has been made to facilitate the joining of lacZ or a Factor Xa cleavage site to any protein reading frame.     

New bacteriophage vectors for the large scale production of single stranded insert DNA

SSEV 18 and SSEV 19, derivatives of the bacteriophages M13mp18/19, are new versatile cloning vectors allowing the large scale preparation of single stranded (ss) insert DNA. Replacing the original multiple cloning site by a synthetic 96 bp DNA fragment, a new polylinker region has been introduced containing complementary sequences designed to form a stem structure where single stranded insert fragments can be excised via a 'master restriction' site. The usefulness of such a vector has been demonstrated by the cloning of a 900 bp HindIII fragment derived from the Mycoplasma hyorhinis 23 S rRNA gene. After excision the single stranded insert was labeled isotopically and tested for sensitivity and specificity in detecting homologous sequences in pure DNA or cellular material immobilized on filters.     

Multipurpose vectors for peptide expression on the M13 viral surface.

We have developed a set of three cloning vectors for the expression of polypeptides on the surface of the M13 viral coat. The M13mp8 genome has been engineered for expression of foreign protein sequences near the NH2-terminus of the mature pIII protein, which is present in five copies on the outside of each M13 viral particle. All three of the vectors carry the same two useful restriction sites for directed cloning of inserts in the pIII coding region; in addition, one vector carries the bacterial gene conferring resistance to the antibiotic tetracycline, and another expresses the lacZ' polypeptide that allows functional complementation of beta-galactosidase activity within the host bacterial cell. All of these vectors propagate well in E. coli DH5 alpha F' cells and do not require helper phage. We demonstrate that a bacteriophage, expressing an eleven amino acid epitope (from human c-myc) at the NH2-terminus of pIII in one of our vectors, can be purified from a vast mixture of other M13 phage through panning techniques. In particular, we find that the c-myc-expressing viral particles can be easily recovered from phage mixtures with the biotinylated form of the monoclonal antibody, 9E10, and streptavidin-coated MagneSphere beads.     

A simple system of cloning in phage M13 and DNA sequencing with terminators

A compilation of techniques for DNA cloning in filamentous phage M13 based vectors for a novice in cloning is presented. It does not require either specialized microbiological facilities, or any specific knowledge in Escherichia coli genetics. The cloning strategy uses only blunt-end ligation into a vector that has been prepared once for several hundred experiments. The first part describes the isolation, preparation and checking of a blunt-ended M13 vector (with M13 mp series vectors as an example), and also the isolation of clonable fragments, transformation of competent cells and preliminary analysis of recombinants. The second part describes procedures and equipment, which enable to sequence recombinant M13 clones by the chain termination procedure of Sanger et al. It includes simplified procedures for the preparation of sequencing gels, and the rules of interpretation of the sequencing ladders. Reference material is added, which includes trouble-shooting guide, E. coli K12 strain list and polylinker sequences for use of mp-series vectors as well as a fully documented cloning and sequencing experiment.     

M13 vectors for selective cloning of sequences specifying initiation of DNA synthesis on single-stranded templates

M13 cloning vectors have been developed for the selection of DNA sequences capable of directing initiation of DNA synthesis on single-stranded templates. These vectors are derived from viable M13 mutants containing large deletions in the region of the complementary strand origin. The deletion mutants are defective in the conversion of viral single strands to the duplex replicative form (SS leads to RF) both in vivo and in vitro, give a reduced phage yield and form turbid plaques. A receptor site for foreign single strand initiation determinants has been introduced into the mutants by the insertion of EcoRI linker sequences at the deletion sites. Specific cloned sequences from bacteriophage G4 RF and from Co1E1 DNA restore a clear plaque type and normal phage growth. Selection of clear-plaque isolates obtained by transfection with RF from one of these vectors, M13 delta E101, carrying inserted Co1E1 HaeIII fragments resulted in the selective cloning of one specific fragment, the HaeIII-E fragment. Insertion of either the H or L strand of the HaeIII-E fragment into the M13 delta E101 viral strand gives a clear plaque phenotype, indicating the presence of initiation determinants on both the H- and L-strands of the Co1E1 HaeIII-E fragment. These cloning vectors provide a new means for the functional dissection of replication origins and for the identification of DNA sequences that determine the enzymatic mechanism of discontinuous synthesis along the length of the bacterial chromosome. The ability to assess initiation capability on the basis of plaque morphology also provides a means for rapid genetic analysis of initiation determinants.     

Improved oligonucleotide site-directed mutagenesis using M13 vectors.

An improved method is described for the construction of mutations in M13 vectors using synthetic oligonucleotides. The DNA is first cloned into a novel M13 vector (based upon M13mp18 or M13mp19), which carries a genetic marker that can be selected against, such as an EcoK or EcoB site, or an amber mutation in an essential phage gene. In this "coupled priming" technique, one primer is used to construct the silent mutation of interest, and a second primer is used to eliminate the selectable marker on the minus strand. After primer extension and ligation, the heteroduplex DNA is transfected into a strain of E. coli which is repair deficient and selects against the plus strand marker. Over 50 mutants have been constructed with this approach, and the yields can be excellent (up to 70%). For the stepwise construction of mutations using separate rounds of mutagenesis, the EcoK and EcoB markers offer a particular advantage over the amber marker. They permit selection in each round, as it is possible to cycle between the two markers. However for construction of multiple mutations over a short region, long synthetic oligonucleotides with multiple mismatches to the template can offer an alternative strategy.     

A direct selection strategy for shotgun cloning and sequencing in the bacteriophage M13.

A new cloning strategy is described which utilizes direct selection of recombinants for shotgun sequencing in the filamentous bacteriophage M13. Direct selection is accomplished by insertional inactivation of the M13 gene X protein, a powerful inhibitor of phage-specific DNA synthesis when overproduced. An extra copy of gene X was inserted into the intergenic region of M13 and placed under the control of the bacteriophage T7 gene 10 promoter and RBS. Random fragments are cloned into the EcoRV cloning site of the new gene X cistron and recombinants are selected in an E. coli male strain producing T7 RNA polymerase. Cloning efficiencies obtained with M13-100 or phosphatase-treated M13mp19 vector are comparable. The direct selection capability of M13-100 was demonstrated to have the following advantages: (a) consistently achieved high ratios of recombinants to religated vector in the libraries, averaging about 500:1 (0.2% background), and (b) the elimination of the need for phosphatase treatment of the vector to reduce background. The direct selection strategy significantly improves the efficiency of shotgun library construction in M13, and should therefore facilitate the cloning aspects of large scale sequencing projects.