Peptide arrays on cellulose support: SPOT synthesis, a time and cost efficient method for synthesis of large numbers of peptides in a parallel and addressable fashion

Peptide synthesis on cellulose using SPOT technology allows the parallel synthesis of large numbers of addressable peptides in small amounts. In addition, the cost per peptide is less than 1% of peptides synthesized conventionally on resin. The SPOT method follows standard fluorenyl-methoxy-carbonyl chemistry on conventional cellulose sheets, and can utilize more than 600 different building blocks. The procedure involves three phases: preparation of the cellulose membrane, stepwise coupling of the amino acids and cleavage of the side-chain protection groups. If necessary, peptides can be cleaved from the membrane for assays performed using soluble peptides. These features make this method an excellent tool for screening large numbers of peptides for many different purposes. Potential applications range from simple binding assays, to more sophisticated enzyme assays and studies with living microbes or cells. The time required to complete the protocol depends on the number and length of the peptides. For example, 400 9-mer peptides can be synthesized within 6 days.     

A novel approach to identifying beta-secretase inhibitors: bis-statine peptide mimetics discovered using structure and spot synthesis

Beta-secretase 1 (BACE1) is an aspartic protease believed to play a critical role in Alzheimer's disease. Inhibitors of this enzyme have been designed by incorporating the non-cleavable hydroxyethylene and statine isosteres into peptides corresponding to BACE1 substrate sequences. We sought to develop new methods to quickly characterize and optimize inhibitors based on the statine core. Minimal sequence requirements for binding were first established using both crystallography and peptide spot synthesis. These shortened peptide inhibitors were then optimized by using spot synthesis to perform iterative cycles of substitution and deletion. The present study resulted in the identification of novel "bis-statine" inhibitors shown by crystallography to have a unique binding mode. Our results demonstrate the application of peptide spot synthesis as an effective method for enhancing peptidomimetic drug discovery.     

Mapping of synergistic components of weakly interacting protein-protein motifs using arrays of paired peptides

Protein-protein recognition usually involves multiple interactions among different motifs that are scattered over protein surfaces. To identify such weak interactions, we have developed a novel double peptide synthesis (DS) method. This method allows us to map protein-protein interactions that involve two linear dis- continuous components from a polypeptide by the use of spatially addressable synergistic pairs of synthetic peptides. The DS procedure is based on the "SPOT" membrane-bound peptide synthesis technique, but to synthesize a mixture of two peptides, it uses both Fmoc (N-(9-fluorenyl)methoxycarbonyl))-alanine and Alloc-alanine at the first cycle. This allows their selective deprotection by either piperidine or tributyltin/palladium treatment, respectively. Using SPOT DS, we confirmed as a proof of principle that Elk-1 Ser(383) phosphorylation by ERK-2 kinase is stimulated by the presence of the Elk-1-docking domain. SPOT DS can also be used to dissect protein-protein motifs that define phosphatase substrate affinity. Using this technique, we identified three new regions in the insulin receptor that stimulate the dephosphorylation of the receptor by protein-tyrosine phosphatase (PTP) 1B and presumably increase the selectivity of PTP for this substrate. These data demonstrate that the SPOT DS technique allows the identification of non-linear weakly interacting protein motifs, which are an important determinant of protein kinase and phosphatase substrate specificity and of protein-protein interactions in general.     

Synthetic peptide and protein domain arrays prepared by the SPOT technology

The SPOT(trade mark) technology for highly parallel synthesis of peptides on flat surfaces in array type format has evolved into a versatile toolbox for a variety of applications in proteomics such as mapping protein-protein interactions and profiling the substrate specificity of enzymes such as kinases and proteases. Originally developed for the synthesis of short overlapping peptide sequences for mapping antibody epitopes this technology has recently been extended to the synthesis of functional protein domains. This opens up a variety of future applications such as target identification and protein expression profiling.     

Using hydroxymethylphenoxy derivates with the SPOT technology to generate peptides with authentic C-termini

The SPOT technology can fulfill most requirements for highly parallel, multiple peptide synthesis of soluble peptides within the upper microgram range. Here, we report on an improved method using hydroxymethylphenoxyacetic acid (HMPA) for 19 amino acids and 4-(4-hydroxymethyl-3-methoxyphenoxy)-butyric acid (HMPB) for proline as acidic labile linkers in SPOT synthesis. Using this approach we could reduce side-chain reactions normally occurring during conventional alkaline peptide cleavage from cellulose membranes. All synthesis steps were adapted to fully-automated SPOT synthesis and therefore represent a time- and cost-saving procedure. Furthermore, the improved cleavage and washing steps resulted in peptides with authentic C-termini in a purity range of 60–95%. Our improved method is ideal for synthesizing many thousand different peptides subsequently used directly for different biological assays requiring authentic C-termini, such as CD8 T-cell epitope screening, vaccine immunization, or tumor imaging.     

SPOT synthesis: reliability of array-based measurement of peptide binding affinity

Peptide arrays prepared by the SPOT synthesis technology have emerged as a proteomic tool to study molecular recognition and identify biologically active peptides. However, it was previously not clear how accurately signal intensities obtained by probing peptide arrays for protein binding really reflect the dissociation constants of the protein-peptide complexes. Using the monoclonal antibody CB4-1 as a model system, we systematically compared dissociation constants of antibody-peptide complexes with signal intensities obtained using the SPOT technology. By analyzing a set of peptides possessing different affinities to the antibody, we determined the strengths of the SPOT screening method. The accuracy of the measured results was improved by taking regional trends in the membrane surface into account. A model based on the mass action law compares well with the experimental results. Interestingly, the applied concentrations of the binding partners do not directly correspond to the effective concentrations in the assay. We show that the SPOT technology is an accurate method for assigning the spots' measured signal intensities to three different binding affinity classes. The dissociation constants of the intermediate region were found to be between pK(dis)=5 and pK(dis)=7. Altering the experimental parameters causes a directed change of this region.     

Studies of substrate-induced conformational changes in human cytomegalovirus protease using optical biosensor technology

The interaction between human cytomegalovirus (HCMV) protease and a peptide substrate was studied using a surface plasmon resonance (SPR)-based biosensor. Immobilization of the enzyme to the sensor chip surface by amine coupling resulted in an active enzyme with a higher catalytic efficiency than the enzyme in solution, primarily due to a lower K(m) value. The interaction between immobilized protease and substrate was characterized by a biphasic SPR signal. Rate constants for the formation of the initial enzyme-substrate complex could be determined from the sensorgrams. Simulated binding curves based on the determined k(cat) and the rate constants indicated that the complex binding signal did not originate from the accumulation of intermediates in the catalytic reaction. By chemical crosslinking of the immobilized HCMV protease, which was shown to limit the enzyme's structural flexibility, it was revealed that the obtained sensorgrams were composed of a signal caused by substrate binding and considerable structural alterations in the immobilized enzyme. Furthermore, HCMV protease was inactivated by chemical crosslinking, indicating that structural flexibility is essential for this enzyme. Parallel experiments with immobilized alpha-chymotrypsin revealed that it does not undergo similar conformational changes on peptide binding and that crosslinking did not inactivate the enzyme. The simultaneous detection of binding and conformational changes using optical biosensor technology is expected to be of importance for further characterization of the enzymatic properties of HCMV protease and for identification of inhibitors of this enzyme. It can also be of use for studies of other flexible proteins.     

Combinatorial solid phase peptide synthesis and bioassays

Solid phase peptide synthesis method, which was introduced by Merrifield in 1963, has spawned the concept of combinatorial chemistry. In this review, we summarize the present technologies of solid phase peptide synthesis (SPPS) that are related to combinatorial chemistry. The conventional methods of peptide library synthesis on polymer support are parallel synthesis, split and mix synthesis and reagent mixture synthesis. Combining surface chemistry with the recent technology of microelectronic semiconductor fabrication system, the peptide microarray synthesis methods on a planar solid support are developed, which leads to spatially addressable peptide library. There are two kinds of peptide microarray synthesis methodologies: pre-synthesized peptide immobilization onto a glass or membrane substrate and in situ peptide synthesis by a photolithography or the SPOT method. This review also discusses the application of peptide libraries for high-throughput bioassays, for example, peptide ligand screening for antibody or cell signaling, enzyme substrate and inhibitor screening as well as other applications.     

Synthesis and evaluation of fluorobenzoylated di- and tripeptides as inhibitors of cyclooxygenase-2 (COX-2)

A series of fluorobenzoylated di- and tripeptides as potential leads for the development of molecular probes for imaging of COX-2 expression was prepared according to standard Fmoc-based solid-phase peptide synthesis. All peptides were assessed for their COX-2 inhibitory potency and selectivity profile in a fluorescence-based COX binding assay. Within the series of 15 peptides tested, cysteine-containing peptides numbered 7, 8, 11 and 12, respectively, were the most potent COX-2 inhibitors possessing IC(50) values ranging from 5 to 85 μM. Fluorobenzoylated tripeptides 7 and 8 displayed some COX-2 selectivity (COX-2 selectivity index 2.1 and 1.6), whereas fluorobenzoylated dipeptides 11 and 12 were shown not to be COX-2 selective. Fluorbenzoylated tripeptide FB-Phe-Cys-Ser-OH was further used in molecular modeling docking studies to determine the binding mode within the active site of the COX-2 enzyme.     

Hemorphins: substrates and/or inhibitors of dipeptidyl peptidase IV. Hemorphins N-terminus sequence influence on the interaction between hemorphins and DPPIV

Hemorphins are endogenous peptides belonging to the family of "atypical" opioid peptides released from sequentially hydrolyzed hemoglobin. In this paper, we report an inhibitory effect of these peptides on dipeptidyl peptidase IV (DPPIV) activity, known to be involved in regulatory functions such as the activation or inactivation of peptides. The structure activity research revealed that hemorphins N-terminus sequence influences nature of the interaction between hemorphins and DPPIV. Kinetic studies conducted with purified DPPIV demonstrated that hemorphin-7 (H7) constitutes a good substrate (K(cat)/K(m) of 137 mM(-1) s(-1)) for this enzyme but could also act as a selective competitive inhibitor by substrate binding site competition. These blood-derived peptides could represent endogenous regulators of this enzyme activity.     

Determinants of BH3 Binding Specificity for Mcl-1 versus Bcl-xL

Interactions among Bcl-2 family proteins are important for regulating apoptosis. Prosurvival members of the family interact with proapoptotic BH3 (Bcl-2-homology-3)-only members, inhibiting execution of cell death through the mitochondrial pathway. Structurally, this interaction is mediated by binding of the α-helical BH3 region of the proapoptotic proteins to a conserved hydrophobic groove on the prosurvival proteins. Native BH3-only proteins exhibit selectivity in binding prosurvival members, as do small molecules that block these interactions. Understanding the sequence and structural basis of interaction specificity in this family is important, as it may allow the prediction of new Bcl-2 family associations and/or the design of new classes of selective inhibitors to serve as reagents or therapeutics. In this work, we used two complementary techniques—yeast surface display screening from combinatorial peptide libraries and SPOT peptide array analysis—to elucidate specificity determinants for binding to Bcl-x_Lversus Mcl-1, two prominent prosurvival proteins. We screened a randomized library and identified BH3 peptides that bound to either Mcl-1 or Bcl-x_L selectively or to both with high affinity. The peptides competed with native ligands for binding into the conserved hydrophobic groove, as illustrated in detail by a crystal structure of a specific peptide bound to Mcl-1. Mcl-1-selective peptides from the screen were highly specific for binding Mcl-1 in preference to Bcl-x_L, Bcl-2, Bcl-w, and Bfl-1, whereas Bcl-x_L-selective peptides showed some cross-interaction with related proteins Bcl-2 and Bcl-w. Mutational analyses using SPOT arrays revealed the effects of 170 point mutations made in the background of a peptide derived from the BH3 region of Bim, and a simple predictive model constructed using these data explained much of the specificity observed in our Mcl-1 versus Bcl-x_L binders.     

Phage display screening for peptidic chitinase inhibitors

A phage display library with disulfide-cyclized peptides was screened for peptides binding to chitinases from Serratia marcescens. One of those peptides was found to efficiently inhibit chitinase A and two others were inhibitors of chitinase B. Complete substitutional analysis of all three peptides using cellulose-bound peptide spot synthesis revealed key interaction positions and allowed optimization of the chitinase B inhibitory peptides towards higher affinity, with inhibitory constants in the lower nanomolar range. Inhibition by all peptides proved to be competitive and highly specific for the chitinase used to select them, as shown with a series of chitinases from different organisms.     

Spot arrays on modified glass surfaces for efficient SPOT synthesis and on-chip bioassay of peptides.

To make SPOT synthesis of peptides and their assays on glass surfaces more convenient, a simple method for making spot arrays on a slide glass was designed through patterning with a photoresist and perfluorination followed by amination with various silane compounds and polymers. With these spot-arrayed glass surfaces, we could measure the coupling completion of each Fmoc amino acid on the glass surface by direct fluorescence analysis after fluorescence-labeling the amino groups on the surface of each spot. Then we synthesized several types of decapeptides and HPQ-pentapeptides on the spot-arrayed glasses and identified the optimal surface condition for stepwise peptide coupling and on-chip bioassay. After optimizing the surface conditions, we synthesized a model library of biotin-Gly-Ala-P(1)-Gly (P(1): one of 19 amino acids) and successfully replicated the well-known alpha-chymotrypsin subsite specificities through Cy5-streptavidin binding to the remaining biotin on the surface after the enzymatic digestion.     

Using peptide arrays to define nuclear carrier binding sites on nucleoporins

In the peptide SPOT array technique, an array of different peptides are synthesized on, and covalently linked to, cellulose membranes. In one usage of this technique, these peptides are screened in an overlay assay to determine which short sequence(s) contains a binding site for an interacting protein. By preparing overlapping peptides that cover the entire sequence of a protein, all of the binding domains on the protein for a second protein can be identified. We have utilized the peptide SPOT array technique to identify the short amino acid sequences within nuclear pore complex proteins (also known as nucleoporins or Nups) that bind the nuclear carrier importin-beta. Crystallization studies by others have indicated that nuclear carriers such as importin-beta bind to phenylalanine-glycine (FG) repeats present in numerous copies in the sequences of a family of nucleoporins. Consistent with this, we found that most (but not all) of the Nup binding sites for importin-beta identified by this technique contain Fx, FG, FxFG, FxFx, or GLFG sequences, although not all such sequences bound importin-beta. Peptide SPOT array substitution studies confirmed a crucial role for the phenylalanine in FG repeats and identified a lysine residue flanking some repeats that is crucial for importin-beta binding to those repeats. In addition to these expected binding sequences for importin-beta, we found multiple instances of a peptide lacking a canonical FG repeat that strongly bound importin-beta, indicating that additional Nup sequences may form binding sites for importin-beta.     

The binding specificity of OppA determines the selectivity of the oligopeptide ATP-binding cassette transporter

The purification and functional reconstitution of a five-component oligopeptide ATP-binding cassette transporter with a remarkably wide substrate specificity are described. High-affinity peptide uptake was dependent on liganded substrate-binding protein OppA, which interacts with the translocator OppBCDF with higher affinity than unliganded OppA. Transport screening with combinatorial peptide libraries revealed that (i) the Opp transporter is not selective with respect to amino acid side chains of the transported peptides; (ii) any peptide that can bind to OppA is transported via Opp, including very long peptides up to 35 residues long; and (iii) the binding specificity of OppA largely determines the overall transport selectivity.     

Deconstructing the DGAT1 Enzyme: Membrane Interactions at Substrate Binding Sites

Diacylglycerol acyltransferase 1 (DGAT1) is a key enzyme in the triacylglyceride synthesis pathway. Bovine DGAT1 is an endoplasmic reticulum membrane-bound protein associated with the regulation of fat content in milk and meat. The aim of this study was to evaluate the interaction of DGAT1 peptides corresponding to putative substrate binding sites with different types of model membranes. Whilst these peptides are predicted to be located in an extramembranous loop of the membrane-bound protein, their hydrophobic substrates are membrane-bound molecules. In this study, peptides corresponding to the binding sites of the two substrates involved in the reaction were examined in the presence of model membranes in order to probe potential interactions between them that might influence the subsequent binding of the substrates. Whilst the conformation of one of the peptides changed upon binding several types of micelles regardless of their surface charge, suggesting binding to hydrophobic domains, the other peptide bound strongly to negatively-charged model membranes. This binding was accompanied by a change in conformation, and produced leakage of the liposome-entrapped dye calcein. The different hydrophobic and electrostatic interactions observed suggest the peptides may be involved in the interactions of the enzyme with membrane surfaces, facilitating access of the catalytic histidine to the triacylglycerol substrates.     

New opioid affinity labels containing maleoyl moiety

Opioid receptor binding properties and pharmacological profiles of novel peptides containing maleoyl function were determined in order to develop new affinity labels. Based on the enkephalin structure peptide ligands were synthesized and tested. Both in in vitro receptor binding experiments and pharmacological studies, all ligands showed agonist character with relatively high affinity (Ki values in the nanomolar range) and good to moderate selectivity. Replacement of Gly2 in the enkephalin frame with D-Ala led to higher affinities with a small decrease in selectivity. The longer peptide chains resulted in compounds with high percentage (up to 86%) of irreversible binding. The selectivity pattern of the ligands is in good agreement with the data obtained from the pharmacological assays (guinea pig ileum and mouse vas deferens bioassays). The newly synthesized peptides could be used in further studies in order to determine more detailed characteristics of the ligand-receptor interaction.     

P141-T A New Array Format for Protein Kinase Substrate Determination

Peptide arrays are useful tools to characterize antibodies, enzyme substrates or sequence specificities of interaction partners with given peptide sequences (e.g., SH2, SH3, MH2 and other domains). Here we present a new method¹ that allows production of hundreds of identical peptide arrays from a single synthesis run on modified, individual cellulose-disks. The disks are dissolved in the acid cleavage-mixture after synthesis and the resulting solutions of peptide-cellulose-conjugates are then spotted onto multiple slides by conventional spotting techniques. As application example we show results obtained with arrays of kinase substrate libraries and various consensus sequences of known kinase targets. These arrays can be used with different detection methods to profile known and unknown kinases for their substrate specificity.The new arrays are derived from the the well known SPOT method² but offer several major improvements: A smaller volume of sample (only 100 μL) is needed for incubation, and a high number of identical copies of the arrays enables large scale, parallel screening experiments. The cost of an individual array is considerably lower than that of a SPOT membrane. Unlike DNA hybridization, protein-protein interactions frequently suffer from low binding affinities. The new cellulose substrate with peptides linked to it generates a three dimensional scaffold on the array support with a peptide loading exceeding that of a monolayer by a factor of 100. The high peptide density of the spots should be advantageous to identify protein-interaction sites, even if their binding constants are low.

Figure 1

Open in a separate window     

A study to assess the cross‐reactivity of cellulose membrane‐bound peptides with detection systems: an analysis at the amino acid level

The growing demand for binding assays to study protein–protein interaction can be addressed by peptide array‐based methods. The SPOT technique is a widespread peptide‐array technology, which is able to distinguish semi‐quantitatively the binding affinities of peptides to defined protein targets within one array. The quality of an assay system used for probing peptide arrays depends on the well‐balanced combination of screening and read‐out methods. The former address the steady‐state of analyte capture, whereas the latter provide the means to detect captured analyte. In all cases, however, false‐positive results can occur when challenging a peptide array with analyte or detecting captured analyte with label conjugates. Little is known about the cross‐reactivity of peptides with the detection agents. Here, we describe at the amino acid level the potential of (i) 5‐(and 6)‐carboxytetramethylrhodamine (5(6)‐TAMRA), (ii) fluoresceinisothiocyanate in form of the peptide‐bound fluorescein‐substituted thiourea derivative (FITC), and (iii) biotin/streptavidin‐POD to cross‐react with individual amino acids in a peptide sequence. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.