Test method development to evaluate hot,humid air decontamination of materials contaminated with Bacillus anthracis ∆Sterne and B. thuringiensis Al Hakam spores

Aims

To develop test methods and evaluate the survival of Bacillus anthracis ?Sterne and Bacillus thuringiensis Al Hakam spores after exposure to hot, humid air.

Methods and Results

Spores (>7 logs) of both strains were dried on six different test materials. Response surface methodology was employed to identify the limits of spore survival at optimal test combinations of temperature (60, 68, 77°C), relative humidity (60, 75, 90%) and time (1, 4, 7 days). No spores survived the harshest test run (77°C, 90% r.h., 7 days), while > 6·5 logs of spores survived the mildest test run (60°C, 60% r.h., 1 day). Spores of both strains inoculated on nylon webbing and polypropylene had greater survival rates at 68°C, 75% r.h., 4 days than spores on other materials. Electron microscopy showed no obvious physical damage to spores using hot, humid air, which contrasted with pH‐adjusted bleach decontamination.

Conclusions

Test methods were developed to show that hot, humid air effectively inactivates B. anthracis ?Sterne and B. thuringiensis Al Hakam spores with similar kinetics.

Significance and Impact of the Study

Hot, humid air is a potential alternative to conventional chemical decontamination.     

Postprocessing microflora of commercial attieke (a fermented cassava product) produced in the south of Côte d'Ivoire

The distribution and presence of hygiene indicator and pathogenic micro‐organisms in 375 samples of attieke marketed in Côte d'Ivoire, and their roles in the food poisoning were evaluated. Microbiological analyses were carried out, which included the total viable bacteria, coliforms, Escherichia coli, Staphylococcus aureus, Salmonella, Bacillus spores, fungi and Clostridium perfringens. The results revealed that the viable bacteria counts ranged from 2·2 ± 1·2 × 10⁵ to 3·4 ± 1·4 × 10⁶ CFU g^?1, while the yeasts and the moulds counts ranged, respectively, from 2·4 ± 0·12 × 10⁴ to 9·8 ± 0·4 × 10⁵ CFU g^?1 and 1·3 ± 0·7 × 10¹ to 1·7 ± 0·7 × 10² CFU g^?1. Bacillus subtilis, Bacillus cereus, Staphylococcus aureus, Citrobacter freundi, Enterobacter amnigenus, Citrobacter youngae, Enterobacter aerogenes, Klebsiella pneumoniae, Serratia marcescens, Enterobacter agglomerans and Klebsiella oxytoca were the bacteria isolated, and Rhizopus spp., Mucor spp., Thamnidium spp., Fusarium spp., Moniliella spp. the fungi. Escherichia coli, Clostridium perfringens and Salmonella spp. were not found. The occurrence of some bacteria and fungi illustrate that attieke collected in Côte d'Ivoire markets may act as a reservoir of pathogenic micro‐organisms for human.

Significance and Impact of Study

This study demonstrates the great need to carry out microbiological tests frequently on attieke and even more the need to apply correct HACCP system during the production. Attieke is especially a well‐known product in West Africa; hence, it is extremely important to ensure an adequate microbiological quality to guarantee consumers health. Overall, the study highlighted the need for effective communication on microbiological food risks, proper instruction and supervision in food‐handling procedures, greater education on food safety risks.     

A simple and sensitive method for detection of Bacillus anthracis by loop‐mediated isothermal amplification

Aims: To develop a rapid and simple system for detection of Bacillus anthracis using a loop‐mediated isothermal amplification (LAMP) method and determine the suitability of LAMP for rapid identification of B. anthracis infection. Methods and Results: A specific LAMP assay targeting unique gene sequences in the bacterial chromosome and two virulence plasmids, pXO1 and pXO2, was designed. With this assay, it was possible to detect more than 10 fg of bacterial DNA per reaction and obtain results within 30–40 min under isothermal conditions at 63°C. No cross‐reactivity was observed among Bacillus cereus group and other Bacillus species. Furthermore, in tests using blood specimens from mice inoculated intranasally with B. anthracis spores, the sensitivity of the LAMP assay following DNA extraction methods using a Qiagen DNeasy kit or boiling protocol was examined. Samples prepared by both methods showed almost equivalent sensitivities in LAMP assay. The detection limit was 3·6 CFU per test. Conclusions: The LAMP assay is a simple, rapid and sensitive method for detecting B. anthracis. Significance and Impact of the Study: The LAMP assay combined with boiling extraction could be used as a simple diagnostic method for identification of B. anthracis infection.     

Real-time loop-mediated isothermal amplification assay for rapid and sensitive detection of anthrax spores in spiked soil and talcum powder

Loop-mediated isothermal amplification (LAMP) assay is a powerful and innovative gene amplification technique that specifically amplifies the target gene under isothermal conditions with a high degree of sensitivity, rapidity and specificity. The major advantage of the LAMP assay is monitoring of amplified products without the requirement of any sophisticated equipment. In the present study a real time LAMP assay was employed for rapid and real time detection of Bacillus anthracis spores spiked in 0.1 g of soil and talcum powder ranging from 2 to 10⁷ spores. DNA was isolated from spiked soil and talcum powder using PBS containing 1% Triton X-100, and heat treatment. Isolated DNA was used as template for LAMP and PCR. LAMP amplification was obtained in 60 min under isothermal condition at 63°C by employing a set of six primers targeting the pag gene of B. anthracis. The detection limit of LAMP assay in soil and talcum powder was found to be as low as 5 spores, compared to 10³ spores and 10⁴ spores by PCR in talcum powder and soil, respectively. The findings suggest that LAMP is a more rapid and sensitive assay than PCR for detecting anthrax spores, additionally the methodology to prepare DNA from spiked samples is simple, rapid and cost effective.     

An evaluation of commercial DNA extraction kits for the isolation of bacterial spore DNA from soil

Aims: To evaluate six commercial DNA extraction kits for their ability to isolate PCR‐quality DNA from Bacillus spores in various soil samples. Methods and Results: Three soils were inoculated with various amounts of Bacillus cereus spores to simulate an outbreak or intentional release of the threat agent Bacillus anthracis. DNA was isolated from soil samples using six commercial DNA extraction kits. Extraction and purification efficiencies were assessed using a duplex real‐time PCR assay that included an internal positive control. The FastDNA^® SPIN kit for Soil showed the highest DNA extraction yield, while the E.Z.N.A.^® Soil DNA and PowerSoil^® DNA Isolation kits showed the highest efficiencies in removing PCR inhibitors from loam soil extracts. Conclusions: The results of this study suggest that commercially available extraction kits can be used to extract PCR‐quality DNA from bacterial spores in soil. The selection of an appropriate extraction kit should depend on the characteristics of the soil sample and the intended downstream application. Significance and Impact of the Study: The results of this study aid in the selection of an appropriate DNA extraction kit for a given soil sample. Its application could expedite sample processing for real‐time PCR detection of a pathogen in soil.     

Real-time polymerase chain reaction assay for rapid and sensitive detection of anthrax spores in spiked soil and talcum powder

Real-time polymerase chain reaction (real-time PCR) is a laboratory technique based on PCR. This technique is able to detect sequence-specific PCR products as they accumulate in “real time” during the PCR amplification, and also to quantify the number of substrates present in the initial PCR mixture before amplification begins. In the present study, real-time PCR assay was employed for rapid and real-time detection of Bacillus anthracis spores spiked in 0.1 g of soil and talcum powder ranging from 5 to 10⁷ spores. DNA was isolated from spiked soil and talcum powder, using PBS containing 1 % Triton-X-100, followed by heat treatment. The isolated DNA was used as template for real-time PCR and PCR. Real-time PCR amplification was obtained in 60 min under the annealing condition at 60°C by employing primers targeting the pag gene of B. anthracis. In the present study, the detection limit of real-time PCR assay in soil was 10³ spores and10² spores in talcum powder, respectively, whereas PCR could detect 10⁴ spores in soil and 10³ spores in talcum powder, respectively.     

Dual effects of single-walled carbon nanotubes coupled with near-infrared radiation on <Emphasis Type="Italic">Bacillus anthracis</Emphasis> spores: inactivates spores and stimulates the germination of surviving spores

Background

Bacillus anthracis is a pathogen that causes life-threatening disease--anthrax. B. anthracis spores are highly resistant to extreme temperatures and harsh chemicals. Inactivation of B. anthracis spores is important to ensure the environmental safety and public health. The 2001 bioterrorism attack involving anthrax spores has brought acute public attention and triggered extensive research on inactivation of B. anthracis spores. Single-walled carbon nanotubes (SWCNTs) as a class of emerging nanomaterial have been reported as a strong antimicrobial agent. In addition, continuous near infrared (NIR) radiation on SWCNTs induces excessive local heating which can enhance SWCNTs’ antimicrobial effect. In this study, we investigated the effects of SWCNTs coupled with NIR treatment on Bacillus anthracis spores.

Results and discussion

The results showed that the treatment of 10 μg/mL SWCNTs coupled with 20 min NIR significantly improved the antimicrobial effect by doubling the percentage of viable spore number reduction compared with SWCNTs alone treatment (88% vs. 42%). At the same time, SWCNTs-NIR treatment activated the germination of surviving spores and their dipicolinic acid (DPA) release during germination. The results suggested the dual effect of SWCNTs-NIR treatment on B. anthracis spores: enhanced the sporicidal effect and stimulated the germination of surviving spores. Molecular level examination showed that SWCNTs-NIR increased the expression levels (>2-fold) in 3 out of 6 germination related genes tested in this study, which was correlated to the activated germination and DPA release. SWCNTs-NIR treatment either induced or inhibited the expression of 3 regulatory genes detected in this study. When the NIR treatment time was 5 or 25 min, there were 3 out of 7 virulence related genes that showed significant decrease on expression levels (>2 fold decrease).

Conclusions

The results of this study demonstrated the dual effect of SWCNTs-NIR treatment on B. anthracis spores, which enhanced the sporicidal effect and stimulated the germination of surviving spores. SWCNTs-NIR treatment also altered the expression of germination, regulatory, and virulence-related genes in B. anthracis.

     

Bacillus anthracis spore interactions with mammalian cells: Relationship between germination state and the outcome of in vitro

Background  

During inhalational anthrax, internalization of Bacillus anthracis spores by host cells within the lung is believed to be a key step for initiating the transition from the localized to disseminated stages of infection. Despite compelling in vivo evidence that spores remain dormant within the bronchioalveolar spaces of the lungs, and germinate only after uptake into host cells, most in vitro studies of infection have been conducted under conditions that promote rapid germination of spores within the culture medium.     

Combined effects of spray‐drying conditions and postdrying storage time and temperature on Salmonella choleraesuis and Salmonella typhimurium survival when inoculated in liquid porcine plasma

The objective of this study was to determine the effectiveness of the spray‐drying process on the inactivation of Salmonella choleraesuis and Salmonella typhimurium spiked in liquid porcine plasma and to test the additive effect of immediate postdrying storage. Commercial spray‐dried porcine plasma was sterilized by irradiation and then reconstituted (1:9) with sterile water. Aliquots of reconstituted plasma were inoculated with either S. choleraesuis or S. typhimurium, subjected to spray‐drying at an inlet temperature of 200°C and an outlet temperature of either 71 or 80°C, and each spray‐drying temperature combinations were subjected to either 0, 30 or 60 s of residence time (RT) as a simulation of residence time typical of commercial dryers. Spray‐dried samples were stored at either 4·0 ± 3·0°C or 23·0 ± 0·3°C for 15 days. Bacterial counts of each Salmonella spp., were completed for all samples. For both Salmonella spp., spray‐drying at both outlet temperatures reduced bacterial counts about 3 logs at RT 0 s, while there was about a 5·5 log reduction at RT 60 s. Storage of all dried samples at either 4·0 ± 3·0°C or 23·0 ± 0·3°C for 15 days eliminate all detectable bacterial counts of both Salmonella spp.

Significance and Impact of the Study

Safety of raw materials from animal origin like spray‐dried porcine plasma (SDPP) may be a concern for the swine industry. Spray‐drying process and postdrying storage are good inactivation steps to reduce the bacterial load of Salmonella choleraesuis and Salmonella typhimurium. For both Salmonella spp., spray‐drying at 71°C or 80°C outlet temperatures reduced bacterial counts about 3 log at residence time (RT) 0 s, while there was about a 5.5 log reduction at RT 60 s. Storage of all dried samples at either 4.0 ± 3.0°C or 23.0 ± 0.3°C for 15 days was effective for eliminating detectable bacterial counts of both Salmonella spp.     

The Bacillus anthracis chromosome contains four conserved, excision-proficient, putative prophages

Background  

Bacillus anthracis is considered to be a recently emerged clone within the Bacillus cereus sensu lato group. The B. anthracis genome sequence contains four putative lambdoid prophages. We undertook this study in order to understand whether the four prophages are unique to B. anthracis and whether they produce active phages.     

Molecular monitoring of Escherichia coli O157: H7 sterilization rate using qPCR and propidium monoazide treatment

Propidium monoazide is a DNA‐intercalating dye. PMA‐qPCR has been reported as a novel method to detect live bacteria in complex samples. In this study, this method was used to monitor the sterilization effects of UHP, ultrasound and high PEF on Escherichia coli O157:H7. Our results showed that all three sterilization techniques are successful to kill viable E. coli O157:H7 cells under their appropriate conditions. PMA‐qPCR can effectively monitor the amount of DNA released from viable E. coli O157:H7 cells, and the results from PMA‐qPCR were highly consistent with those from plate counting after treatment with UHP, ultrasound and high PEF. The maximal ΔC_t between PMA‐qPCR and qPCR obtained in this study was 10·39 for UHP, 5·76 for ultrasound and 2·30 for high PEF. The maximal sterilization rates monitored by PMA‐qPCR were 99·92% for UHP, 99·99% for ultrasound and 100% for high PEF. Thus, PMA‐qPCR can be used to detect the sterilization effect on food and water supplies after treatment with UHP, ultrasound and high PEF.

Significance and Impact of the Study

The reliable detection of viable foodborne pathogenic bacteria in water and food is of great importance in our daily life. However, the traditional bacteria cultivation‐based methods are time‐consuming and difficult to monitor all viable bacteria because of the limitation of cultivation conditions. This study demonstrated that PMA‐qPCR technique is very effective to monitor viable E. coli O157:H7 after sterilization and will help to monitor the viable bacteria in food and water.     

Investigation of antimicrobial activity of photothermal therapeutic gold/copper sulfide core/shell nanoparticles to bacterial spores and cells

Background

Au/CuS core/shell nanoparticles (NPs) were designed as a new type of transducer agent for photothermal therapy (PTT), with attractive features of easy preparation, low cost and small size for targeting. This paper studied for the first time the intrinsic antimicrobial activity of Au/CuS NPs to B. anthracis spores and cells in addition to its PTT effect.

Results

It was found that Au/CuS NPs were highly efficient in inactivating B. anthracis cells, but not effective to the spores. Treatment with NPs at ~0.83 μM for 30 min achieved a 7 log reduction in viable cells. The antimicrobial effect was both NPs concentration and treatment time dependent. SEM imaging and the efflux of DNA test demonstrated the damage of cell membrane after NPs treatment, yet further research is necessary to fully understand the precise inactivation mechanism.

Conclusions

The Au/CuS NPs had strong antimicrobial activity to B. anthracis cells, which showed a great potential to be an effective antimicrobial agent to bacterial cells.

     

Determination of vertebral heart score in three species of Spider monkey (Ateles fusciceps,A. hybridus and A. paniscus)

Background

The vertebral heart score (VHS) is a method of evaluation of cardiac size well documented in domestic mammals and in other primate species, and the aim of this study was to determine the VHS in three species of Spider monkey.

Methods

In this retrospective study, right lateral radiographs of thirty clinically well animals were reviewed and VHS determined. The species included were Ateles fusciceps (n=17), Ateles hybridus (n=8) and Ateles paniscus (n=5).

Results

The VHS was found to vary between species and was 9.73±0.81 for A. fusciceps, 10.53±0.37 for A. hybridus and 10.45±0.27 for A. paniscus.

Conclusions

The observed values appear consistent with values determined for other primate species. There was statistically significant variation noted between species, and so VHS should be considered species‐specific in this genus. The values determined may be of benefit in objectively evaluating cardiac size in the species investigated.     

Procurement of spore‐free Bacillus anthracis for molecular typing outside of BSL3 environment

Aims: To (i) develop a protocol that would eliminate or greatly reduce sporulation within Bacillus anthracis vegetative cells, and (ii) harvest an adequate number of cells and sufficient DNA suitable for molecular methods including Riboprint^® analysis and pulse field gel electrophoresis (PFGE). Methods and Results: Seven strains of B. anthracis (Ames, French B2, Heluky, Kruger, Pasteur, Sterne, and Vollum) were grown at 37, 42 and 45°C under normal air, enhanced CO₂, microaerophilic, and anaerobic conditions on solid media and subcultured in two broths with and without supplements. The bacterial cells were centrifuged and washed. Slides made from the cell pellets were stained with Malachite Green and observed for the presence of spores. Cell preparations were subjected to 80°C for 30 min and processed for and analysed by either Riboprinter^® or PFGE. Multiple pellets of each strain were processed, stained, placed onto solid culture media, incubated for 7 days and observed for growth. The cell preparations yielded clear and reproducible results with both molecular methods. None of the cell preparations yielded growth on the culture media. Conclusions: This method eliminated viable spores in cell preparations of B. anthracis, yet still allowed the growth of vegetative cells to provide sufficient DNA suitable for analysis by Riboprinter^® and PFGE. Significance and Impact of the Study: This method will provide safe cell preparations, prevent instrument contamination, and may be useful for other aerobic and anaerobic spore‐formers.     

High production of poly(3‐hydroxybutyrate) from a wild Bacillus megaterium Bolivian strain

Aim

Taking into account that a novel strain of Bacillus megaterium was isolated from Uyuni salt lake (Bolivia) in a previous work, the objectives of this new study were to determine the maximal Poly‐3‐hydroxybutyrate production potential of B. megaterium strain uyuni S29 in an industrial conventional media, the possibility that the strain accumulates different types of polyhydroxyalkanoates, the cellular morphology during the biosynthesis process and the characterization of the produced biopolymers.

Methods and Results

The micro‐organism was first tested in a 3‐L bioreactor obtaining a high specific growth rate of 1·64 h^?1. A second fed‐batch experiment was carried out in shaking flasks, reaching up to 70% PHB of cell dry mass. The biosynthesized polymers were extracted by two different extraction procedures and characterized. The results showed that all of them were PHB with thermal properties different to the conventional PHB. The micrographs taken by TEM show the different cell morphology during the fermentation process.

Conclusions

In this previous study, the strain not only grew properly in the industrial conditions proposed without spore formation, but also produced and accumulated a large content of PHB, never reached before for its genus. Therefore, if the culture conditions can be optimized, the biopolymer production could be increased.

Significance and Impact of the Study

The impact of the study has related to the area of the biomaterials and their production. The study provides new data related to the high production of PHB from the wild novel strain B. megaterium uyuni S29, the highest polymer accumulation for the genus Bacillus without spores formation.     

Gamma-phage lysin PlyG sequence-based synthetic peptides coupled with Qdot-nanocrystals are useful for developing detection methods for Bacillus anthracis by using its surrogates, B. anthracis-Sterne and B. cereus-4342

Background  

Previous reports of site-directed deletion analysis on gamma (γ)-phage lysin protein (PlyG) have demonstrated that removal of a short amino acid sequence in the C-terminal region encompassing a 10-amino acid motif (190LKMTADFILQ199) abrogates its binding activity specific to the cell wall of Bacillus anthracis. Whether short synthetic peptides representing the10-amino acid PlyG putative binding motif flanked by surrounding N- and C-terminal residues also selectively bind to the bacterial cell wall has not been evaluated. If such peptides do demonstrate selective binding to the cell wall, they could serve as bio-probes towards developing detection technologies for B. anthracis. Furthermore, by using B. anthracis (Sterne, 34F2), an animal vaccine and B. cereus-4342, a γ-phage susceptible rare strain as surrogates of B. anthracis, development of proof-of-concepts for B. anthracis are feasible.     

Wet and dry density of Bacillus anthracis and other Bacillus species

Aims: To determine the wet and dry density of spores of Bacillus anthracis and compare these values with the densities of other Bacillus species grown and sporulated under similar conditions. Methods and Results: We prepared and studied spores from several Bacillus species, including four virulent and three attenuated strains of B. anthracis, two Bacillus species commonly used to simulate B. anthracis (Bacillus atrophaeus and Bacillus subtilis) and four close neighbours (Bacillus cereus, Bacillus megaterium, Bacillus thuringiensis and Bacillus stearothermophilus), using identical media, protocols and instruments. We determined the wet densities of all spores by measuring their buoyant density in gradients of Percoll and their dry density in gradients of two organic solvents, one of high and the other of low chemical density. The wet density of different strains of B. anthracis fell into two different groups. One group comprised strains of B. anthracis producing spores with densities between 1·162 and 1·165 g ml^?1 and the other group included strains whose spores showed higher density values between 1·174 and 1·186 g ml^?1. Both Bacillus atrophaeus and B. subtilis were denser than all the B. anthracis spores studied. Interestingly and in spite of the significant differences in wet density, the dry densities of all spore species and strains were similar. In addition, we correlated the spore density with spore volume derived from measurements made by electron microscopy analysis. There was a strong correlation (R² = 0·95) between density and volume for the spores of all strains and species studied. Conclusions: The data presented here indicate that the two commonly used simulants of B. anthracis, B. atrophaeus and B. subtilis were considerably denser and smaller than all B. anthracis spores studied and hence, these simulants could behave aerodynamically different than B. anthracis. Bacillus thuringiensis had spore density and volume within the range observed for the various strains of B. anthracis. The clear correlation between wet density and volume of the B. anthracis spores suggest that mass differences among spore strains may be because of different amounts of water contained within wet dormant spores. Significance and Impact of the Study: Spores of nonvirulent Bacillus species are often used as simulants in the development and testing of countermeasures for biodefense against B. anthracis. The similarities and difference in density and volume that we found should assist in the selection of simulants that better resemble properties of B. anthracis and, thus more accurately represent the performance of countermeasures against this threat agent where spore density, size, volume, mass or related properties are relevant.     

The Bacillus anthracis cholesterol-dependent cytolysin, Anthrolysin O, kills human neutrophils, monocytes and macrophages

Background  

Bacillus anthracis is an animal and human pathogen whose virulence is characterized by lethal and edema toxin, as well as a poly-glutamic acid capsule. In addition to these well characterized toxins, B. anthracis secretes several proteases and phospholipases, and a newly described toxin of the cholesterol-dependent cytolysin (CDC) family, Anthrolysin O (ALO).     

DNA sequence conservation between the Bacillus anthracis pXO2 plasmid and genomic sequence from closely related bacteria

Background  

Complete sequencing and annotation of the 96.2 kb Bacillus anthracis plasmid, pXO2, predicted 85 open reading frames (ORFs). Bacillus cereus and Bacillus thuringiensis isolates that ranged in genomic similarity to B. anthracis, as determined by amplified fragment length polymorphism (AFLP) analysis, were examined by PCR for the presence of sequences similar to 47 pXO2 ORFs.