Polyelectrolyte complex formation mediated immobilization of chitosan-invertase neoglycoconjugate on pectin-coated chitin

Saccharomyces cerevisiae invertase, chemically modified with chitosan, was immobilized on pectin-coated chitin support via polyelectrolyte complex formation. The yield of immobilized enzyme protein was determined as 85% and the immobilized biocatalyst retained 97% of the initial chitosan-invertase activity. The optimum temperature for invertase was increased by 10 °C and its thermostability was enhanced by about 10 °C after immobilization. The immobilized enzyme was stable against incubation in high ionic strength solutions and was 4-fold more resistant to thermal treatment at 65 °C than the native counterpart. The biocatalyst prepared retained 96 and 95% of the original catalytic activity after ten cycles of reuse and 74 h of continuous operational regime in a packed bed reactor, respectively.     

Immobilization of chitosan-modified invertase on alginate-coated chitin support via polyelectrolyte complex formation

Saccharomyces cerevisiae invertase was chemically modified with chitosan and further immobilized on sodium alginate-coated chitin support. The yield of immobilized protein was determined as 85% and the enzyme retained 97% of the initial chitosan-invertase activity. The optimum temperature for invertase was increased by 10 °C and its thermostability was enhanced by about 9 °C after immobilization. The immobilized enzyme was stable against incubation in high ionic strength solutions and was four-fold more resistant to thermal treatment at 65 °C than the native counterpart. The biocatalyst prepared retained 80% of the original catalytic activity after 50 h under continuous operational regime in a packed bed reactor.     

Immobilized Sclerotinia sclerotiorum invertase to produce invert sugar syrup from industrial beet molasses by product

The fungus Sclerotinia sclerotiorum produces invertase activity during cultivation on many agroindustrial residues. The molasses induced invertase was purified by DEAE-cellulose chromatography. The molecular mass of the purified enzyme was estimated at 48 kDa. Optimal temperature was determined at 60 °C and thermal stability up to 65 °C. The enzyme was stable between pH 2.0 and 8.0; optimum pH was about 5.5. Apparent K_m and V_max for sucrose were estimated to be respectively 5.8 mM and 0.11 μmol/min. The invertase was activated by β-mercaptoethanol. Free enzyme exhibited 80 % of its original activity after two month’s storage at 4 °C and 50 % after 1 week at 25 °C. In order to investigate an industrial application, the enzyme was immobilized on alginate and examined for invert sugar production by molasses hydrolysis in a continuous bioreactor. The yield of immobilized invertase was about 78 % and the activity yield was 59 %. Interestingly the immobilized enzyme hydrolyzed beet molasses consuming nearly all sucrose. It retained all of its initial activity after being used for 4 cycles and about 65 % at the sixth cycle. Regarding productivity; 20 g/l of molasses by-product gave the best invert sugar production 46.21 g/day/100 g substrate related to optimal sucrose conversion of 41.6 %.     

Glucose oxidase immobilization on a novel cellulose acetate-polymethylmethacrylate membrane

Glucose oxidase (GOD) was immobilized on cellulose acetate-polymethylmethacrylate (CA-PMMA) membrane. The immobilized GOD showed better performance as compared to the free enzyme in terms of thermal stability retaining 46% of the original activity at 70 degrees C where the original activity corresponded to that obtained at 20 degrees C. FT-IR and SEM were employed to study the membrane morphology and structure after treatment at 70 degrees C. The pH profile of the immobilized and the free enzyme was found to be similar. A 2.4-fold increase in Km value was observed after immobilization whereas Vmax value was lower for the immobilized GOD. Immobilized glucose oxidase showed improved operational stability by maintaining 33% of the initial activity after 35 cycles of repeated use and was found to retain 94% of activity after 1 month storage period. Improved resistance against urea denaturation was achieved and the immobilized glucose oxidase retained 50% of the activity without urea in the presence of 5M urea whereas free enzyme retained only 8% activity.     

Covalent binding of enzymes to synthetic membranes containing acrylamide units, using formaldehyde

Synthetic membranes containing 10% acrylamide units were subjected to activation with formaldehyde at pH 7.5 and 45 degrees C. Trypsin, invertase, and urease were bound to this activated membrane and the kinetic properties of immobilized enzymes were studied. The permeability of the membrane for distilled water manifests certain differences depending on the enzyme bound. The membranes with immobilized enzymes stored at 4 degrees C in a moist state showed no change in their activity for 6 months. The membrane with immobilized invertase has preserved its activity even after 20 operations with 2% sucrose solution at 25 degrees C. The proposed method of binding enzymes to synthetic membranes containing acrylamide groups, through the introduction of N-hydroxymethyl groups, possesses several advantages with respect to the activation of the membrane in a one-step reaction with cheap and accessible reagent, high operative stability of the immobilized enzymes, no danger of bacterial rotting, and long shelf life of the membrane.     

Glutaraldehyde activation of polymer Nylon-6 for lipase immobilization: enzyme characteristics and stability

An extracellular alkaline lipase of a thermo tolerant Bacillus coagulans BTS-3 was immobilized onto glutaraldehyde activated Nylon-6 by covalent binding. Under optimum conditions, the immobilization yielded a protein loading of 228 microg/g of Nylon-6. Immobilized enzyme showed maximum activity at a temperature of 55 degrees C and pH 7.5. The enzyme was stable between pH 7.5-9.5. It retained 88% of its original activity at 55 degrees C for 2h and also retained 85% of its original activity after eight cycles of hydrolysis of p-NPP. Kinetic parameters Km and Vmax were found to be 4mM and 10 micromol/min/ml, respectively. The influence of organic solvents on the catalytic activity of immobilized enzyme was also evaluated. The bound lipase showed enhanced activity when exposed to n-heptane. The substrate specificity of immobilized enzyme revealed more efficient hydrolysis of higher carbon length (C-16) ester than other ones.     

Immobilization of invertase onto poly(3-methylthienyl methacrylate)/poly(3-thiopheneacetic acid) matrix

A novel immobilization matrix, poly(3-methylthienyl methacrylate)–poly(3-thiopheneacetic acid) (PMTM–PTAA), was synthesized and used for the covalent immobilization of Saccharomyces cerevisiae invertase to produce invert sugar. The immobilization resulted in 87% immobilization efficiency. Optimum conditions for activity were not affected by immobilization and the optimum pH and temperature for both free and immobilized enzyme were found to be 4.5 and 55 °C, respectively. However, immobilized invertase was more stable at high pH and temperatures. The kinetic parameters for free and immobilized invertase were also determined using the Lineweaver–Burk plot. The K_m values were 35 and 38 mM for free and immobilized enzyme, respectively. The V_max values were 29 and 24 mg glucose/mg enzyme min for free and immobilized enzyme, respectively. Immobilized enzyme could be used for the production of glucose and fructose from sucrose since it retained almost all the initial activity for a month in storage and retained the whole activity in repeated 50 batch reactions.     

Enhanced thermostability of silica-immobilized lipase from Bacillus coagulans BTS-3 and synthesis of ethyl propionate

A lipase from the thermophilic isolate Bacillus coagulans BTS-3 was produced and purified. The enzyme was purified 40-fold to homogeneity by ammonium sulfate precipitation and DEAE-Sepharose column chromatography. Its molecular weight was 31 kDa on SDS-PAGE. The purified lipase was immobilized on silica and its binding efficiency was found to be 60%. The enzyme took 60 min to bind maximally onto the support. The pH and temperature optima of immobilized lipase were same as those of the free enzyme, i.e. 8.5 and 55 degrees C, respectively. The immobilized enzyme had shown marked thermostability on the elevated temperatures of 55, 60, 65 and 70 degrees C. The immobilized enzyme was reused for eigth cycles as it retained almost 80% of its activity. The catalytic activity of immobilized enzyme was enhanced in n-hexane and ethanol. The immobilized enzyme when used for esterification of ethanol and propionic acid showed 96% conversion in n-hexane in 12 h at 55 degrees C.     

Hydrolysis of concentrated sucrose syrups by invertase immobilized on anion exchanger waste cotton thread.

Yeast invertase was immobilized on polyethyleneimine-coated cotton thread by adsorption followed by crosslinking with glutaraldehyde. The thread-bound invertase was used as an easily retrievable system for the hydrolysis of 80% w/v commercial sucrose syrups. The immobilized enzyme was stable for over 90 days to a temperature of 50 degrees C, only when stored in 80% sucrose solution. Above this temperature, inactivation of enzyme was observed. The cotton threads were used in a batch reactor for hydrolysis of sucrose in about 30 batches carried out over a period of 50 days without loss in activity. The threads could also be used in a packed bed reactor (1.51) for 97% hydrolysis of 80% sucrose syrups at 50 degrees C at a rate of about 360 kg per month for a period of 3 months.     

Immobilization of the exo-maltohexaohydrolase by the irradiation method

Exomaltohexaohydrolase (E.C.3.2.1.98) was immobilized by radiocopolymerization of some synthetic monomers which were mixed in various combinations. Irradiation was carried out while the mixture of monomers and enzymes was frozen in petroleum ether-dry-ice bath. Recovery of the immobilized enzyme was 44-75%.The optimum pH of the enzyme slightly shifted to the acidic side. The pH stability was improved remarkably by immobilization. The enzyme was stable retaining more than 90% of its original activity in the range pH 4-11. The optimum reaction temperature of the enzyme increased about 2 degrees C. Heat stability was also improved by immobilization, and that the enzyme retained about 40% of its original activity after treatment at 75 degrees C for 15 min. The immobilized enzyme was stable to the repeated use of 20 cycles. The K(m) value of the enzyme for short-chain amylose was almost the same as that of native enzyme. When soluble starch was used as the substrate, the K(m), value of the enzyme was three times as large as that of native enzyme. Effects of various metal ions and inhibitors on the immobilized enzyme were also studied compared to the native enzyme.     

Immobilization of endo-polygalacturonase from Aspergillus ustus on silica gel

Endo-polygalacturonase from Aspergillus ustus when immobilized on to modified silica gel retained 28% of its original activity. The immobilized enzyme could be re-used through 10 cycles of reaction with almost 90% retention of its original activity. It had increased thermostability over its soluble form: the half-life of the soluble enzyme at 40 °C was less than 10 h whereas the immobilized enzyme retained 82% of its activity after 10 h at 40 °C. Similarly, at 50 °C the half-life of the soluble enzyme was 30 min whereas that of the immobilized enzyme was 5 h.     

Immobilization of urease on vermiculite

Urease (EC 3.5.1.5) of high activity was obtained when the enzyme was immobilized on vermiculite crosslinked with 2.5% glutaraldehyde in chilled EDTA-phosphate buffer (pH 5.5). The highest activity of the immobilized enzyme was at 65°C and pH 6.5 while the optimum temperature for free urease was found to be 25°C. The thermal stability of immobilized urease was observed to be much better than that of the free urease. When stored at 4°C, urease immobilized on vermiculite retained 69 to 81% of its activity after 60 days and 61 to 75% of its original activity was retained after 4 repeated uses.     

The effect of lead on the calcium-handling capacity of rat heart mitochondria.

1. Glucose 6-phosphate dehydrogenase (D-glucose 6-phosphate-NADP+ oxidoreductase, EC 1.1.1.49) from baker's yeast (Saccharomyces cerevisiae) was immobilized on CNBr-activated Sepharose 4B with retention of about 3% of enzyme activity. This uncharged preparation was stable for up to 4 months when stored in borate buffer, pH7.6, at 4 degrees C. 2. Stable enzyme preparations with negative or positive overall charge were made by adding valine or ethylenediamine to the CNBr-activated Sepharose 4B 30min after addition of the enzyme. 3. These three immobilized enzyme preparations retained 40-60% of their activity after 15 min at 50 degrees C. The soluble enzyme is inactivated by these conditions. 4. The soluble enzyme lost 45 and 100% of its activity on incubation for 3h at pH6 and 10 respectively. The three immobilized-enzyme preparations were completely stable over this entire pH range. 5. The pH optimum of the positively and negatively charged immobilized-enzyme preparations were about 8 and 9 respectively. The soluble enzyme and the uncharged immobilized enzyme had an optimum pH at about 8.5 6. Glucose 6-phosphate dehydrogenase immobilized on CNBr-activated Sephadex G-25 was unstable, as was enzyme attached to CNBr-activated Sepharose 4B to which glycine, asparitic acid, valine or ethylenediamine was added at the same time as the enzyme.     

Immobilization of Amaranthus leaf oxalate oxidase on alkylamine glass

A membrane bound oxalate oxidase from leaves of Amaranthus spionsus has been partially purified and immobilized on alkylamine glass with a yield of 9.2 mg protein/g support. The enzyme retained 99.4% of initial activity of free enzyme after immobilization. There was no change in the optimum pH (3.5) and Vmax but the temperature for maximum activity was slightly decreased (35 degrees C) and energy of activation (Ea) and Km for oxalate were increased after immobilization. The immobilized enzyme preparation was stable for 6 months, when stored in distilled water at 4 degrees C. Presence of Cl- did not affect the activity of immobilized enzyme.     

Purification of a moderate thermotolerant Bacillus coagulans BTS1 lipase and its properties in a hydro-gel system

An alkaline thermotolerant lipase of Bacillus coagulans BTS1 was successively purified by ammonium sulfate precipitation and DEAE anion exchange chromatography. The purified lipase immobilized in alginate beads showed an optimal activity at pH 7.5 and 55 degrees C. A pH of 5.0 or 10.0 completely quenched the activity of immobilized lipase. The alginate-bound lipase retained its activity following exposure to most of the organic solvents including amines, alkanes and alcohols. Chloride salt of Al3+, Co2+, Mg2+ and NH4+ modulated the lipase activity of alginate-immobilized enzyme. The alginate entrapped lipase showed a preferentially high activity towards p-nitrophenyl palmitate (C: 16) and activity of matrix increased following exposure to SDS. Moreover, the immobilized lipase retained more than 50% of its activity after 3rd cycle of reuse.     

Characteristics of yeast invertase immobilized on porous cellulose beads.

Invertase from Candida utilis was immobilized on porous cellulose beads by an ionic-quanidino bond. The immobilized invertase showed optimum activity between pH 4.0 and 5.4, while the free enzyme had a sharp optimum at pH 4.1. Both temperature profiles were fairly similar up to 55 degrees C. However, above this temperature the immobilized enzyme was more stable than the free enzyme. From the temperature data, the activation energies were found to be 7,322 and 4,052 cal/g mol for the free and the immobilized enzyme, respectively. Candida invertase shows characteristics of substrate inhibition. Both the Km and Ki for the free and the immobilized enzymes were determined. The apparent Ki for the immobilized invertase was much higher than the Ki of the free enzyme, suggesting a diffusion effect. Immobilized invertase molecules deep in the pores only see sucrose concentrations much less than the bulk concentrations. Immobilization, thus, offers certain processing advantages in this regard.     

Production of xylobiose from the autohydrolysis explosion liquor of corncob using Thermotoga maritima xylanase B (XynB) immobilized on nickel-chelated Eupergit C

In this study, a thermostable recombinant xylanase B (XynB) from Thermotoga maritima MSB8 was immobilized on nickel-chelated Eupergit C 250L. This immobilized XynB was then used to hydrolyze the autohydrolysis explosion liquor of corncob (AELC) in a packed-bed enzyme reactor for continuous production of xylooligosaccharides, especially xylobiose. When tested in batch hydrolysis of AELC, the immobilized XynB still retained its relative activity of 92.5% after 10 cycles of hydrolysis at 90 degrees C. The immobilized XynB retained 83.6% of its initial hydrolysis activity even after 168 h of hydrolysis reaction at 90 degrees C and demonstrated a half-life time of 577.6 h (24 days) for continuous hydrolysis. HPLC showed that xylobiose (49.8%) and xylose (22.6%) were the main hydrolysis products yielded during continuous hydrolysis. Xylobiose was adsorbed on an activated charcoal column and eluted with a linear gradient of 15% (v/v) ethanol to yield xylobiose with 84.7% of recovery. Also, the purity of xylobiose was up to 97.2% as determined by HPLC. Therefore, the immobilized XynB was suitable for the efficient production of xylobiose from AELC. This is the first report on the immobilization of xylanase for xylobiose production.     

A smart bioconjugate of chymotrypsin

alpha-Chymotrypsin was immobilized on Eudragit S-100 via covalent coupling with 93% retention of proteolytic activity. The conjugate behaved as a smart biocatalyst and functioned as a pH-dependent reversibly soluble-insoluble biocatalyst. The pH optimum of chymotrypsin broadened on immobilization, and the immobilized preparation showed better stability at and above pH 6.5 as compared to the free enzyme. The immobilized enzyme showed a slight shift in the temperature optimum and enhanced thermal stability retaining 70% of its original activity after 1 h of exposure to 40 degrees C as compared to the 25% residual activity for the free enzyme under identical conditions. K(m) and V(max) values did not change on immobilization. Also, the immobilized preparation was quite stable to reuse, it retained almost 85% of its original activity even after a fifth precipitation cycle. UV spectroscopy and circular dichroism were used to probe structural changes in the enzyme upon immobilization.     

Comparative study of stability of soluble and cell wall invertase from Saccharomyces cerevisiae

Yeast Saccharomyces cerevisiae is the most significant source of enzyme invertase. It is mainly used in the food industry as a soluble or immobilized enzyme. The greatest amount of invertase is located in the periplasmic space in yeast. In this work, it was isolated into two forms of enzyme from yeast S. cerevisiae cell, soluble and cell wall invertase (CWI). Both forms of enzyme showed same temperature optimum (60°C), similar pH optimum, and kinetic parameters. The significant difference between these biocatalysts was observed in their thermal stability, stability in urea and methanol solution. At 60°C, CWI had 1.7 times longer half-life than soluble enzyme, while at 70°C CWI showed 8.7 times longer half-life than soluble enzyme. After 2-hr of incubation in 8?M urea solution, soluble invertase and CWI retained 10 and 60% of its initial activity, respectively. During 22?hr of incubation of both enzymes in 30 and 40% methanol, soluble invertase was completely inactivated, while CWI changed its activity within the experimental error. Therefore, soluble invertase and CWI have not shown any substantial difference, but CWI showed better thermal stability and stability in some of the typical protein-denaturing agents.     

Immobilization and characterization of cellulase on concanavalin A (Con A)-layered calcium alginate beads

Cellulase has been immobilized on hybrid concanavalin A (Con A)-layered calcium alginate–starch beads. Immobilized cellulase retained about 82% of its activity. Con A was extracted from jack bean and the obtained crude protein was characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis. The immobilized beads showed high mechanical and storage stability; immobilized cellulase retained 100% and 85% activity at 4°C and 30°C, respectively, over one month. The immobilized cellulase retained about 70% of its activity after five cycles of use. The immobilized cellulase retained 70% activity after 120-min exposure to 60°C, whereas the soluble form only retained about 20%, showing that immobilization improved thermal stability. Surface morphology and elemental analysis of immobilized cellulase were examined using scanning electron microscope equipped with energy-dispersive X-ray. Based on the enzyme stability and reuse, this method of immobilization is both convenient and cheap.