Type II restriction endonuclease R.Eco29kI is a member of the GIY-YIG nuclease superfamily

Background

The majority of experimentally determined crystal structures of Type II restriction endonucleases (REases) exhibit a common PD-(D/E)XK fold. Crystal structures have been also determined for single representatives of two other folds: PLD (R.BfiI) and half-pipe (R.PabI), and bioinformatics analyses supported by mutagenesis suggested that some REases belong to the HNH fold. Our previous bioinformatic analysis suggested that REase R.Eco29kI shares sequence similarities with one more unrelated nuclease superfamily, GIY-YIG, however so far no experimental data were available to support this prediction. The determination of a crystal structure of the GIY-YIG domain of homing endonuclease I-TevI provided a template for modeling of R.Eco29kI and prompted us to validate the model experimentally.

Results

Using protein fold-recognition methods we generated a new alignment between R.Eco29kI and I-TevI, which suggested a reassignment of one of the putative catalytic residues. A theoretical model of R.Eco29kI was constructed to illustrate its predicted three-dimensional fold and organization of the active site, comprising amino acid residues Y49, Y76, R104, H108, E142, and N154. A series of mutants was constructed to generate amino acid substitutions of selected residues (Y49A, R104A, H108F, E142A and N154L) and the mutant proteins were examined for their ability to bind the DNA containing the Eco29kI site 5'-CCGCGG-3' and to catalyze the cleavage reaction. Experimental data reveal that residues Y49, R104, E142, H108, and N154 are important for the nuclease activity of R.Eco29kI, while H108 and N154 are also important for specific DNA binding by this enzyme.

Conclusion

Substitutions of residues Y49, R104, H108, E142 and N154 predicted by the model to be a part of the active site lead to mutant proteins with strong defects in the REase activity. These results are in very good agreement with the structural model presented in this work and with our prediction that R.Eco29kI belongs to the GIY-YIG superfamily of nucleases. Our study provides the first experimental evidence for a Type IIP REase that does not belong to the PD-(D/E)XK or HNH superfamilies of nucleases, and is instead a member of the unrelated GIY-YIG superfamily.     

The monomeric GIY-YIG homing endonuclease I-BmoI uses a molecular anchor and a flexible tether to sequentially nick DNA

The GIY-YIG nuclease domain is found within protein scaffolds that participate in diverse cellular pathways and contains a single active site that hydrolyzes DNA by a one-metal ion mechanism. GIY-YIG homing endonucleases (GIY-HEs) are two-domain proteins with N-terminal GIY-YIG nuclease domains connected to C-terminal DNA-binding and they are thought to function as monomers. Using I-BmoI as a model GIY-HE, we test mechanisms by which the single active site is used to generate a double-strand break. We show that I-BmoI is partially disordered in the absence of substrate, and that the GIY-YIG domain alone has weak affinity for DNA. Significantly, we show that I-BmoI functions as a monomer at all steps of the reaction pathway and does not transiently dimerize or use sequential transesterification reactions to cleave substrate. Our results are consistent with the I-BmoI DNA-binding domain acting as a molecular anchor to tether the GIY-YIG domain to substrate, permitting rotation of the GIY-YIG domain to sequentially nick each DNA strand. These data highlight the mechanistic differences between monomeric GIY-HEs and dimeric or tetrameric GIY-YIG restriction enzymes, and they have implications for the use of the GIY-YIG domain in genome-editing applications.     

Tetrameric restriction enzymes: expansion to the GIY-YIG nuclease family

The GIY-YIG nuclease domain was originally identified in homing endonucleases and enzymes involved in DNA repair and recombination. Many of the GIY-YIG family enzymes are functional as monomers. We show here that the Cfr42I restriction endonuclease which belongs to the GIY-YIG family and recognizes the symmetric sequence 5′-CCGC/GG-3′ (‘/’ indicates the cleavage site) is a tetramer in solution. Moreover, biochemical and kinetic studies provided here demonstrate that the Cfr42I tetramer is catalytically active only upon simultaneous binding of two copies of its recognition sequence. In that respect Cfr42I resembles the homotetrameric Type IIF restriction enzymes that belong to the distinct PD-(E/D)XK nuclease superfamily. Unlike the PD-(E/D)XK enzymes, the GIY-YIG nuclease Cfr42I accommodates an extremely wide selection of metal-ion cofactors, including Mg²⁺, Mn²⁺, Co²⁺, Zn²⁺, Ni²⁺, Cu²⁺ and Ca²⁺. To our knowledge, Cfr42I is the first tetrameric GIY-YIG family enzyme. Similar structural arrangement and phenotypes displayed by restriction enzymes of the PD-(E/D)XK and GIY-YIG nuclease families point to the functional significance of tetramerization.     

Type II restriction endonuclease R.Hpy188I belongs to the GIY-YIG nuclease superfamily,but exhibits an unusual active site

Background  

Catalytic domains of Type II restriction endonucleases (REases) belong to a few unrelated three-dimensional folds. While the PD-(D/E)XK fold is most common among these enzymes, crystal structures have been also determined for single representatives of two other folds: PLD (R.BfiI) and half-pipe (R.PabI). Bioinformatics analyses supported by mutagenesis experiments suggested that some REases belong to the HNH fold (e.g. R.KpnI), and that a small group represented by R.Eco29kI belongs to the GIY-YIG fold. However, for a large fraction of REases with known sequences, the three-dimensional fold and the architecture of the active site remain unknown, mostly due to extreme sequence divergence that hampers detection of homology to enzymes with known folds.     

Divalent metal ion differentially regulates the sequential nicking reactions of the GIY-YIG homing endonuclease I-BmoI

Homing endonucleases are site-specific DNA endonucleases that function as mobile genetic elements by introducing double-strand breaks or nicks at defined locations. Of the major families of homing endonucleases, the modular GIY-YIG endonucleases are least understood in terms of mechanism. The GIY-YIG homing endonuclease I-BmoI generates a double-strand break by sequential nicking reactions during which the single active site of the GIY-YIG nuclease domain must undergo a substantial reorganization. Here, we show that divalent metal ion plays a significant role in regulating the two independent nicking reactions by I-BmoI. Rate constant determination for each nicking reaction revealed that limiting divalent metal ion has a greater impact on the second strand than the first strand nicking reaction. We also show that substrate mutations within the I-BmoI cleavage site can modulate the first strand nicking reaction over a 314-fold range. Additionally, in-gel DNA footprinting with mutant substrates and modeling of an I-BmoI-substrate complex suggest that amino acid contacts to a critical GC-2 base pair are required to induce a bottom-strand distortion that likely directs conformational changes for reaction progress. Collectively, our data implies mechanistic roles for divalent metal ion and substrate bases, suggesting that divalent metal ion facilitates the re-positioning of the GIY-YIG nuclease domain between sequential nicking reactions.     

Identification of a single HNH active site in type IIS restriction endonuclease Eco31I

Type IIS restriction endonuclease Eco31I is a "short-distance cutter", which cleaves DNA strands close to its recognition sequence, 5'-GGTCTC(1/5). Previously, it has been proposed that related endonucleases recognizing a common sequence core GTCTC possess two active sites for cleavage of both strands in the DNA substrate. Here, we present bioinformatic identification and experimental evidence for a single nuclease active site. We identified a short region of homology between Eco31I and HNH nucleases, constructed a three-dimensional model of the putative catalytic domain and validated our predictions by random and site-specific mutagenesis. The restriction mechanism of Eco31I is suggested by analogy to the mechanisms of phage T4 endonuclease VII and homing endonuclease I-PpoI. We propose that residues D311 and N334 coordinate the cofactor. H312 acts as a general base-activating water molecule for the nucleophilic attack. K337 together with R340 and D345 are located in close proximity to the active center and are essential for correct folding of catalytic motif, while D345 together with R264 and D273 could be directly involved in DNA binding. We also predict that the Eco31I catalytic domain contains a putative Zn-binding site, which is essential for its structural integrity. Our results suggest that the HNH-like active site is involved in the cleavage of both strands in the DNA substrate. On the other hand, analysis of site-specific mutants in the region, previously suggested to harbor the second active site, revealed its irrelevance to the nuclease activity. Thus, our data argue against the earlier prediction and indicate the presence of a single conserved active site in type IIS restriction endonucleases that recognize common sequence core GTCTC.     

Perpetuating the homing endonuclease life cycle: identification of mutations that modulate and change I-TevI cleavage preference

Homing endonucleases are sequence-tolerant DNA endonucleases that act as mobile genetic elements. The ability of homing endonucleases to cleave substrates with multiple nucleotide substitutions suggests a high degree of adaptability in that changing or modulating cleavage preference would require relatively few amino acid substitutions. Here, using directed evolution experiments with the GIY-YIG homing endonuclease I-TevI that targets the thymidylate synthase gene of phage T4, we readily isolated variants that dramatically broadened I-TevI cleavage preference, as well as variants that fine-tuned cleavage preference. By combining substitutions, we observed an ∼10 000-fold improvement in cleavage on some substrates not cleaved by the wild-type enzyme, correlating with a decrease in readout of information content at the cleavage site. Strikingly, we were able to change the cleavage preference of I-TevI to that of the isoschizomer I-BmoI which targets a different cleavage site in the thymidylate synthase gene, recapitulating the evolution of cleavage preference in this family of homing endonucleases. Our results define a strategy to isolate GIY-YIG nuclease domains with distinct cleavage preferences, and provide insight into how homing endonucleases may escape a dead-end life cycle in a population of saturated target sites by promoting transposition to different target sites.     

Domain organization and functional analysis of type IIS restriction endonuclease Eco31I

Type IIS restriction endonuclease Eco31I harbors a single HNH active site and cleaves both DNA strands close to its recognition sequence, 5'-GGTCTC(1/5). A two-domain organization of Eco31I was determined by limited proteolysis. Analysis of proteolytic fragments revealed that the N-terminal domain of Eco31I is responsible for the specific DNA binding, while the C-terminal domain contains the HNH nuclease-like active site. Gel-shift and gel-filtration experiments revealed that a monomer of the N-terminal domain of Eco31I is able to bind a single copy of cognate DNA. However, in contrast to other studied type IIS enzymes, the isolated catalytic domain of Eco31I was inactive. Steady-state and transient kinetic analysis of Eco31I reactions was inconsistent with dimerization of Eco31I on DNA. Thus, we propose that Eco31I interacts with individual copies of its recognition sequence in its monomeric form and presumably remains a monomer as it cleaves both strands of double-stranded DNA. The domain organization and reaction mechanism established for Eco31I should be common for a group of evolutionary related type IIS restriction endonucleases Alw26I, BsaI, BsmAI, BsmBI and Esp3I that recognize DNA sequences bearing the common pentanucleotide 5'-GTCTC.     

Iterative database searches demonstrate that glycoside hydrolase families 27, 31, 36 and 66 share a common evolutionary origin with family 13

A catalytic sequence motif PDX10-30(E/D)XK is found in many restriction enzymes. On the basis of sequence similarities and mapping of the conserved residues to the crystal structure of NgoMIV we suggest that residues D160, K182, R186, R188 and E195 contribute to the catalytic/DNA binding site of the Ecl18kI restriction endonuclease. Mutational analysis confirms the functional significance of the conserved residues of Ecl18kI. Therefore, we conclude that the active site motif 159VDX21KX12E of Ecl18kI differs from the canonical PDX10-30(E/D)XK motif characteristic for most of the restriction enzymes. Moreover, we propose that two subfamilies of endonucleases Ecl18kI/PspGI/EcoRII and Cfr10I/Bse634I/NgoMIV, specific, respectively, for CCNGG/CCWGG and RCCGGY/GCCGGC sites, share conserved active site architecture and DNA binding elements.     

Biochemical and mutagenic analysis of I-CreII reveals distinct but important roles for both the H-N-H and GIY-YIG motifs

Homing endonucleases typically contain one of four conserved catalytic motifs, and other elements that confer tight DNA binding. I-CreII, which catalyzes homing of the Cr.psbA4 intron, is unusual in containing two potential catalytic motifs, H-N-H and GIY-YIG. Previously, we showed that cleavage by I-CreII leaves ends (2-nt 3′ overhangs) that are characteristic of GIY-YIG endonucleases, yet it has a relaxed metal requirement like H-N-H enzymes. Here we show that I-CreII can bind DNA without an added metal ion, and that it binds as a monomer, akin to GIY-YIG enzymes. Moreover, cleavage of supercoiled DNA, and estimates of strand-specific cleavage rates, suggest that I-CreII uses a sequential cleavage mechanism. Alanine substitution of a number of residues in the GIY-YIG motif, however, did not block cleavage activity, although DNA binding was substantially reduced in several variants. Substitution of conserved histidines in the H-N-H motif resulted in variants that did not promote DNA cleavage, but retained high-affinity DNA binding—thus identifying it as the catalytic motif. Unlike the non-specific H-N-H colicins, however; substitution of the conserved asparagine substantially reduced DNA binding (though not the ability to promote cleavage). These results indicate that, in I-CreII, two catalytic motifs have evolved to play important roles in specific DNA binding. The data also indicate that only the H-N-H motif has retained catalytic ability.     

DNA binding and cleavage by the HNH homing endonuclease I-HmuI

The structure of I-HmuI, which represents the last family of homing endonucleases without a defining crystallographic structure, has been determined in complex with its DNA target. A series of diverse protein structural domains and motifs, contacting sequential stretches of nucleotide bases, are distributed along the DNA target. I-HmuI contains an N-terminal domain with a DNA-binding surface found in the I-PpoI homing endonuclease and an associated HNH/N active site found in the bacterial colicins, and a C-terminal DNA-binding domain previously observed in the I-TevI homing endonuclease. The combination and exchange of these features between protein families indicates that the genetic mobility associated with homing endonucleases extends to the level of independent structural domains. I-HmuI provides an unambiguous structural connection between the His-Cys box endonucleases and the bacterial colicins, supporting the hypothesis that these enzymes diverged from a common ancestral nuclease.     

The nicking homing endonuclease I-BasI is encoded by a group I intron in the DNA polymerase gene of the Bacillus thuringiensis phage Bastille

Here we describe the discovery of a group I intron in the DNA polymerase gene of Bacillus thuringiensis phage Bastille. Although the intron insertion site is identical to that of the Bacillus subtilis phages SPO1 and SP82 introns, the Bastille intron differs from them substantially in primary and secondary structure. Like the SPO1 and SP82 introns, the Bastille intron encodes a nicking DNA endonuclease of the H-N-H family, I-BasI, with a cleavage site identical to that of the SPO1-encoded enzyme I-HmuI. Unlike I-HmuI, which nicks both intron-minus and intron-plus DNA, I-BasI cleaves only intron-minus alleles, which is a characteristic of typical homing endonucleases. Interestingly, the C-terminal portions of these H-N-H phage endonucleases contain a conserved sequence motif, the intron-encoded endonuclease repeat motif (IENR1) that also has been found in endonucleases of the GIY-YIG family, and which likely comprises a small DNA-binding module with a globular ββααβ fold, suggestive of module shuffling between different homing endonuclease families.     

Three-dimensional modeling of the I-TevI homing endonuclease catalytic domain, a GIY-YIG superfamily member, using NMR restraints and Monte Carlo dynamics.

Using a recent version of the SICHO algorithm for in silico protein folding, we made a blind prediction of the tertiary structure of the N-terminal, independently folded, catalytic domain (CD) of the I-TevI homing endonuclease, a representative of the GIY-YIG superfamily of homing endonucleases. The secondary structure of the I-TevI CD has been determined using NMR spectroscopy, but computational sequence analysis failed to detect any protein of known tertiary structure related to the GIY-YIG nucleases (Kowalski et al., Nucleic Acids Res., 1999, 27, 2115-2125). To provide further insight into the structure-function relationships of all GIY-YIG superfamily members, including the recently described subfamily of type II restriction enzymes (Bujnicki et al., Trends Biochem. Sci., 2000, 26, 9-11), we incorporated the experimentally determined and predicted secondary and tertiary restraints in a reduced (side chain only) protein model, which was minimized by Monte Carlo dynamics and simulated annealing. The subsequently elaborated full atomic model of the I-TevI CD allows the available experimental data to be put into a structural context and suggests that the GIY-YIG domain may dimerize in order to bring together the conserved residues of the active site.     

Homing endonuclease structure and function

Homing endonucleases are encoded by open reading frames that are embedded within group I, group II and archael introns, as well as inteins (intervening sequences that are spliced and excised post-translationally). These enzymes initiate transfer of those elements (and themselves) by generating strand breaks in cognate alleles that lack the intervening sequence, as well as in additional ectopic sites that broaden the range of intron and intein mobility. Homing endonucleases can be divided into several unique families that are remarkable in several respects: they display extremely high DNA-binding specificities which arise from long DNA target sites (14-40 bp), they are tolerant of a variety of sequence variations in these sites, and they display disparate DNA cleavage mechanisms. A significant number of homing endonucleases also act as maturases (highly specific cofactors for the RNA splicing reactions of their cognate introns). Of the known homing group I endonuclease families, two (HNH and His-Cys box enzymes) appear to be diverged from a common ancestral nuclease. While crystal structures of several representatives of the LAGLIDADG endonuclease family have been determined, only structures of single members of the HNH (I-HmuI), His-Cys box (I-PpoI) and GIY-YIG (I-TevI) families have been elucidated. These studies provide an important source of information for structure-function relationships in those families, and are the centerpiece of this review. Finally, homing endonucleases are significant targets for redesign and selection experiments, in hopes of generating novel DNA binding and cutting reagents for a variety of genomic applications.     

Structural parsimony in endonuclease active sites: should the number of homing endonuclease families be redefined?

Homing endonucleases are classified into four families based on active site sequence motifs. Through structural comparisons we have found structural similarities between the endonuclease domain of colicin E9, an H-N-H motif-containing enzyme, and both the non-specific nuclease from Serratia and I-PpoI, a His-Cys box-containing homing endonuclease. Our comparison identifies conservation at the heart of all three enzyme active sites and so argues for a re-classification of H-N-H and His-Cys box homing endonucleases as a single family. We suggest the 'betabetaalpha-Me family' of homing enzymes to reflect the three elements of secondary structure and the metal ion that define the motif.     

102 Genome engineering nucleases derived from GIY-YIG homing endonucleases

Efficient targeted manipulation of complex genomes requires highly specific endonucleases to generate double-strand breaks at defined locations (Bibikova et al., 2003; Bogdanove and Voytas, 2011). The predominantly engineered nucleases, zinc-finger nucleases (ZFNs), and TAL effector nucleases (TALENs) use the catalytic domain of FokI as the nuclease portion. This domain, however, functions as a dimer to nonspecifically cleave DNA meaning that ZFNs and TALENs must be designed in head-to-head pairs to target a desired sequence. To overcome this limitation and expand the toolbox of genome editing reagents, we used the N-terminal catalytic domain and interdomain linker of the monomeric GIY-YIG homing endonuclease I-TevI to create I-TevI-zinc-fingers (Tev-ZFEs), and I-TevI-TAL effectors (Tev-TALs) (Kleinstiver et al. 2012). We also made I-TevI fusions to LAGLIDADGs homing endonucleases (I-Tev-LHEs). All the three fusions showed activity on model substrates on par with ZFNs and TALENs in yeast-based recombination assays. These proof-of-concept experiments demonstrate that the catalytic domain of GIY-YIG homing endonucleases can be targeted to relevant loci by fusing the domain to characterize DNA-binding platforms. Recent efforts have focused on improving the Tev-TAL platform by (1) understanding the spacing requirements between the nuclease cleavage site and the DNA binding site, (2) probing the DNA binding requirements of the I-TevI linker domain, and (3) demonstrating activity in mammalian systems.     

Construction of an overproducing strain,purification, and biochemical characterization of the 6His-Eco29kI restriction endonuclease

We constructed a strain of Escherichia coli overproducing 6His-tagged Eco29kI by placing the coding sequence under control of a strong bacteriophage T5 promoter. The yield of 6His-Eco29kI restriction endonuclease expression could be increased to about 20% of the total cellular protein, but inclusion bodies formed consisting of insoluble 6His-Eco29kI protein. We developed a fast and effective protocol for purification of the homogeneous enzyme from both soluble and insoluble fractions and established their identity by catalytic activity assay. The isolated enzymes were tested for recognition specificity and optimal reaction conditions as a function of NaCl and KCl concentrations, temperature, and pH compared with the native Eco29kI restriction endonuclease. The 6His-tagged enzyme retained the specificity of the native protein but had an altered optimum of its catalytic reaction.     

SegH and Hef: two novel homing endonucleases whose genes replace the mobC and mobE genes in several T4-related phages

T4 contains two groups of genes with similarity to homing endonucleases, the seg-genes (similarity to endonucleases encoded by group I introns) containing GIY-YIG motifs and the mob-genes (similarity to mobile endonucleases) containing H-N-H motifs. The four seg-genes characterized to date encode homing endonucleases with cleavage sites close to their respective gene loci while none of the mob-genes have been shown to cleave DNA. Of 18 phages screened, only T4 was found to have mobC while mobE genes were found in five additional phages. Interestingly, three phages encoded a seg-like gene (hereby called segH) with a GIY-YIG motif in place of mobC. An additional phage has an unrelated gene called hef (homing endonuclease-like function) in place of the mobE gene. The gene products of both novel genes displayed homing endonuclease activity with cleavage site specificity close to their respective genes. In contrast to intron encoded homing endonucleases, both SegH and Hef can cleave their own DNA as well as DNA from phages without the genes. Both segH and mobE (and most likely hef) can home between phages in mixed infections. We discuss why it might be a selective advantage for phage freestanding homing endonucleases to cleave both HEG-containing and HEG-less genomes.     

A comparative structure-function analysis and molecular mechanism of action of endonucleases from Serratia marcescens and Physarum polycephalum

Structural and functional characteristics were compared for wild-type nuclease from Serratia marcescens, which belongs to the family of DNA/RNA nonspecific endonucleases, its mutational forms, and the nuclease I-PpoI from Physarum polycephalum, which is a representative of the Cys-His box-containing subgroup of the superfamily of extremely specific intron-encoded homing DNases. Despite the lack of sequence homology and the overall different topology of the Serratia marcescens and I-PpoI nucleases, their active sites have a remarkable structural similarity. Both of them have a unique magnesium atom in the active site, which is a part of the coordinatively bonded water-magnesium complex involved in their catalytic acts. In the enzyme-substrate complexes, the Mg2+ ion is chelated by an Asp residue, coordinates two oxygen atoms of DNA, and stabilizes the transition state of the phosphate anion and 3'-OH group of the leaving nucleotide. A new mechanism of the phosphodiester bond cleavage, which is common for the Serratia marcescens and I-PpoI nucleases and differs from the known functioning mechanism of the restriction and homing endonucleases, was proposed. It presumes a His residue as a general base for the activation of a non-cluster water molecule at the nucleophilic in line displacement of the 3'-leaving group. A strained metalloenzyme-substrate complex is formed during hydrolysis and relaxes to the initial state after the reaction. The English version of the paper.