Stabilizing and destabilizing clusters in the hydrophobic core of long two-stranded alpha-helical coiled-coils

Detailed sequence analyses of the hydrophobic core residues of two long two-stranded alpha-helical coiled-coils that differ dramatically in sequence, function, and length were performed (tropomyosin of 284 residues and the coiled-coil domain of the myosin rod of 1086 residues). Three types of regions were present in the hydrophobic core of both proteins: stabilizing clusters and destabilizing clusters, defined as three or more consecutive core residues of either stabilizing (Leu, Ile, Val, Met, Phe, and Tyr) or destabilizing (Gly, Ala, Cys, Ser, Thr, Asn, Gln, Asp, Glu, His, Arg, Lys, and Trp) residues, and intervening regions that consist of both stabilizing and destabilizing residues in the hydrophobic core but no clusters. Subsequently, we designed a series of two-stranded coiled-coils to determine what defines a destabilizing cluster and varied the length of the destabilizing cluster from 3 to 7 residues to determine the length effect of the destabilizing cluster on protein stability. The results showed a dramatic destabilization, caused by a single Leu to Ala substitution, on formation of a 3-residue destabilizing cluster (DeltaT(m) of 17-21 degrees C) regardless of the stability of the coiled-coil. Any further substitution of Leu to Ala that increased the size of the destabilizing cluster to 5 or 7 hydrophobic core residues in length had little effect on stability (DeltaT(m) of 1.4-2.8 degrees C). These results suggested that the contribution of Leu to protein stability is context-dependent on whether the hydrophobe is in a stabilizing cluster or its proximity to neighboring destabilizing and stabilizing clusters.     

Packing and hydrophobicity effects on protein folding and stability: effects of beta-branched amino acids, valine and isoleucine, on the formation and stability of two-stranded alpha-helical coiled coils/leucine zippers.

The aim of this study was to examine the differences between hydrophobicity and packing effects in specifying the three-dimensional structure and stability of proteins when mutating hydrophobes in the hydrophobic core. In DNA-binding proteins (leucine zippers), Leu residues are conserved at positions "d," and beta-branched amino acids, Ile and Val, often occur at positions "a" in the hydrophobic core. In order to discern what effect this selective distribution of hydrophobes has on the formation and stability of two-stranded alpha-helical coiled coils/leucine zippers, three Val or three Ile residues were simultaneously substituted for Leu at either positions "a" (9, 16, and 23) or "d" (12, 19, and 26) in both chains of a model coiled coil. The stability of the resulting coiled coils was monitored by CD in the presence of Gdn.HCl. The results of the mutations of Ile to Val at either positions "a" or "d" in the reduced or oxidized coiled coils showed a significant hydrophobic effect with the additional methylene group in Ile stabilizing the coiled coil (delta delta G values range from 0.45 to 0.88 kcal/mol/mutation). The results of mutations of Leu to Ile or Val at positions "a" in the reduced or oxidized coiled coils showed a significant packing effect in stabilizing the coiled coil (delta delta G values range from 0.59 to 1.03 kcal/mol/mutation). Our results also indicate the subtle control hydrophobic packing can have not only on protein stability but on the conformation adopted by the amphipathic alpha-helices. These structural findings correlate with the observation that in DNA-binding proteins, the conserved Leu residues at positions "d" are generally less tolerant of amino acid substitutions than the hydrophobic residues at positions "a."     

Design, synthesis and structural characterization of model heterodimeric coiled-coil proteins.

We report the design and synthesis of model heterodimeric coiled-coil proteins and the packing contribution of interchain hetero-hydrophobic side-chains to coiled-coil stability. The heterodimeric coiled-coils are obtained by oxidizing two 35-residue polypeptide chains, each containing a cysteine residue at position 2 and differing in amino acid sequences in the hydrophobic positions ("a" and "d") responsible for the formation and stabilization of the coiled-coil. In each peptide, a single Ala residue was substituted for Leu at position "a" or "d". The formation and stability of heterodimeric coiled-coils were investigated by circular dichroism studies in the presence and absence of guanidine hydrochloride and compared to the corresponding homodimeric coiled-coils. The coiled-coil proteins with an Ala substitution at position "a" were less stable than those with an Ala substitution at position "d" in both the homodimeric (Ala-Ala interchain interactions) and heterodimeric (Leu-Ala interchain interactions ) coiled-coils. The 70-residue disulfide bridged peptides (homo- and heterodimeric coiled-coils) can be readily separated by reversed-phase chromatography (RPC) even though they have identical amino acid compositions as well as in the hydrophobic "a" and "d" positions. The elution of the 70-residue peptides prior to their corresponding 35-residue monomers suggests that these proteins are retaining a large portion of their coiled-coil structure during RPC at pH2 and their retention behavior correlates with protein stability.     

Effect of chain length on coiled-coil stability: decreasing stability with increasing chain length

The de novo design and biophysical characterization of three series of two-stranded alpha-helical coiled coils with different chain lengths are described. Our goal was to examine how increasing chain length would affect protein folding and stability when one or more heptad repeat(s) of K-A-E-A-L-E-G (gabcdef) was inserted into the central region of different coiled-coil host proteins. This heptad was designed to maintain the continuous 3-4 hydrophobic repeat of the coiled-coil host and introduce an Ala and Leu residue in the hydrophobic core at the a and d position, respectively, and a pair of stabilizing interchain ionic i to i' + 5 (g to e') interactions per heptad inserted. The secondary structures of the three series of disulfide-bridged polypeptides were studied by CD spectroscopy and their stabilities determined by chemical and thermal denaturation. The results showed that successive insertions of this heptad systematically decreased the stability of all the coiled coils studied regardless of the overall initial stability of the host coiled coil. These observations are in contrast to the generally accepted implication that the folding and stability of coiled coils are enhanced with increasing chain length. Our results imply that, in these examples where an Ala and Leu hydrophobic residue were introduced into the coiled-coil core per inserted heptad, there was still insufficient stability to overcome unfavorable entropy associated with chain length extension, even though the inserted heptad contained the most stabilizing hydrophobic residue (Leu) at position d and stabilizing ionic attractions.     

Effects of side-chain characteristics on stability and oligomerization state of a de novo-designed model coiled-coil: 20 amino acid substitutions in position "d"

We describe the de novo design and biophysical characterization of a model coiled-coil protein in which we have systematically substituted 20 different amino acid residues in the central "d" position. The model protein consists of two identical 38 residue polypeptide chains covalently linked at their N termini via a disulfide bridge. The hydrophobic core contained Val and Ile residues at positions "a" and Leu residues at positions "d". This core allowed for the formation of both two-stranded and three-stranded coiled-coils in benign buffer, depending on the substitution at position "d". The structure of each analog was analyzed by CD spectroscopy and their relative stability determined by chemical denaturation using GdnHCI (all analogs denatured from the two-stranded state). The oligomeric state(s) was determined by high-performance size-exclusion chromatography and sedimentation equilibrium analysis in benign medium. Our results showed a thermodynamic stability order (in order of decreasing stability) of: Leu, Met, Ile, Tyr, Phe, Val, Gln, Ala, Trp, Asn, His, Thr, Lys, Ser, Asp, Glu, Arg, Orn, and Gly. The Pro analog prevented coiled-coil formation. The overall stability range was 7.4 kcal/mol from the lowest to the highest analog, indicating the importance of the hydrophobic core and the dramatic effect a single substitution in the core can have upon the stability of the protein fold. In general, the side-chain contribution to the level of stability correlated with side-chain hydrophobicity. Molecular modelling studies, however, showed that packing effects could explain deviations from a direct correlation. In regards to oligomerization state, eight analogs demonstrated the ability to populate exclusively one oligomerization state in benign buffer (0.1 M KCl, 0.05 M K(2)PO(4)(pH 7)). Ile and Val (the beta-branched residues) induced the three-stranded oligomerization state, whereas Tyr, Lys, Arg, Orn, Glu and Asp induced the two-stranded state. Asn, Gln, Ser, Ala, Gly, Phe, Leu, Met and Trp analogs were indiscriminate and populated two-stranded and three-stranded states. Comparison of these results with similar substitutions in position "a" highlights the positional effects of individual residues in defining the stability and numbers of polypeptide chains occurring in a coiled-coil structure. Overall, these results in conjunction with other work now generate a relative thermodynamic stability scale for 19 naturally occurring amino acid residues in either an "a" or "d" position of a two-stranded coiled-coil. Thus, these results will aid in the de novo design of new coiled-coil structures, a better understanding of their structure/function relationships and the design of algorithms to predict the presence of coiled-coils within native protein sequences.     

Clustering of large hydrophobes in the hydrophobic core of two-stranded alpha-helical coiled-coils controls protein folding and stability

The de novo design and biophysical characterization of two 60-residue peptides that dimerize to fold as parallel coiled-coils with different hydrophobic core clustering is described. Our goal was to investigate whether designing coiled-coils with identical hydrophobicity but with different hydrophobic clustering of non-polar core residues (each contained 6 Leu, 3 Ile, and 7 Ala residues in the hydrophobic core) would affect helical content and protein stability. The disulfide-bridged P3 and P2 differed dramatically in alpha-helical structure in benign conditions. P3 with three hydrophobic clusters was 98% alpha-helical, whereas P2 was only 65% alpha-helical. The stability profiles of these two analogs were compared, and the enthalpy and heat capacity changes upon denaturation were determined by measuring the temperature dependence by circular dichroism spectroscopy and confirmed by differential scanning calorimetry. The results showed that P3 assembled into a stable alpha-helical two-stranded coiled-coil and exhibited a native protein-like cooperative two-state transition in thermal melting, chemical denaturation, and calorimetry experiments. Although both peptides have identical inherent hydrophobicity (the hydrophobic burial of identical non-polar residues in equivalent heptad coiled-coil positions), we found that the context dependence of an additional hydrophobic cluster dramatically increased stability of P3 (Delta Tm approximately equal to 18 degrees C and Delta[urea](1/2) approximately equal to 1.5 M) as compared with P2. These results suggested that hydrophobic clustering significantly stabilized the coiled-coil structure and may explain how long fibrous proteins like tropomyosin maintain chain integrity while accommodating polar or charged residues in regions of the protein hydrophobic core.     

A putative signal peptidase recognition site and sequence in eukaryotic and prokaryotic signal peptides

Presecretory signal peptides of 39 proteins from diverse prokaryotic and eukaryotic sources have been compared. Although varying in length and amino acid composition, the labile peptides share a hydrophobic core of approximately 12 amino acids. A positively charged residue (Lys or Arg) usually precedes the hydrophobic core. Core termination is defined by the occurrence of a charged residue, a sequence of residues which may induce a beta-turn in a polypeptide, or an interruption in potential alpha-helix or beta-extended strand structure. The hydrophobic cores contain, by weight average, 37% Leu: 15% Ala: 10% Val: 10% Phe: 7% Ile plus 21% other hydrophobic amino acids arranged in a non-random sequence. Following the hydrophobic cores (aligned by their last residue) a highly non-random and localized distribution of Ala is apparent within the initial eight positions following the core: (formula; see text) Coincident with this observation, Ala-X-Ala is the most frequent sequence preceding signal peptidase cleavage. We propose the existence of a signal peptidase recognition sequence A-X-B with the preferred cleavage site located after the sixth amino acid following the core sequence. Twenty-two of the above 27 underlined Ala residues would participate as A or B in peptidase cleavage. Position A includes the larger aliphatic amino acids, Leu, Val and Ile, as well as the residues already found at B (principally Ala, Gly and Ser). Since a preferred cleavage site can be discerned from carboxyl and not amino terminal alignment of the hydrophobic cores it is proposed that the carboxyl ends are oriented inward toward the lumen of the endoplasmic reticulum where cleavage is thought to occur. This orientation coupled with the predicted beta-turn typically found between the core and the cleavage site implies reverse hairpin insertion of the signal sequence. The structural features which we describe should help identify signal peptides and cleavage sites in presumptive amino acid sequences derived from DNA sequences.     

Nine hydrophobic side chains are key determinants of the thermodynamic stability and oligomerization status of tumour suppressor p53 tetramerization domain.

The contribution of almost each amino acid side chain to the thermodynamic stability of the tetramerization domain (residues 326-353) of human p53 has been quantitated using 25 mutants with single-residue truncations to alanine (or glycine). Truncation of either Leu344 or Leu348 buried at the tetramer interface, but not of any other residue, led to the formation of dimers of moderate stability (8-9 kcal/mol of dimer) instead of tetramers. One-third of the substitutions were moderately destabilizing (<3.9 kcal/mol of tetramer). Truncations of Arg333, Asn345 or Glu349 involved in intermonomer hydrogen bonds, Ala347 at the tetramer interface or Thr329 were more destabilizing (4.1-5.7 kcal/mol). Strongly destabilizing (8.8- 11.7 kcal/mol) substitutions included those of Met340 at the tetramer interface and Phe328, Arg337 and Phe338 involved peripherally in the hydrophobic core. Truncation of any of the three residues involved centrally in the hydrophobic core of each primary dimer either prevented folding (Ile332) or allowed folding only at high protein concentration or low temperature (Leu330 and Phe341). Nine hydrophobic residues per monomer constitute critical determinants for the stability and oligomerization status of this p53 domain.     

Importance of secondary structural specificity determinants in protein folding: insertion of a native beta-sheet sequence into an alpha-helical coiled-coil

To examine how a short secondary structural element derived from a native protein folds when in a different protein environment, we inserted an 11-residue beta-sheet segment (cassette) from human immunoglobulin fold, Fab new, into an alpha-helical coiled-coil host protein (cassette holder). This de novo design protein model, the structural cassette mutagenesis (SCM) model, allows us to study protein folding principles involving both short- and long-range interactions that affect secondary structure stability and conformation. In this study, we address whether the insertion of this beta-sheet cassette into the alpha-helical coiled-coil protein would result in conformational change nucleated by the long-range tertiary stabilization of the coiled-coil, therefore overriding the local propensity of the cassette to form beta-sheet, observed in its native immunoglobulin fold. The results showed that not only did the nucleating helices of the coiled-coil on either end of the cassette fail to nucleate the beta-sheet cassette to fold with an alpha-helical conformation, but also the entire chimeric protein became a random coil. We identified two determinants in this cassette that prevented coiled-coil formation: (1) a tandem dipeptide NN motif at the N-terminal of the beta-sheet cassette, and (2) the hydrophilic Ser residue, which would be buried in the hydrophobic core if the coiled-coil structure were to fold. By amino acid substitution of these helix disruptive residues, that is, either the replacement of the NN motif with high helical propensity Ala residues or the substitution of Ser with Leu to enhance hydrophobicity, we were able to convert the random coil chimeric protein into a fully folded alpha-helical coiled-coil. We hypothesized that this NN motif is a "secondary structural specificity determinant" which is very selective for one type of secondary structure and may prevent neighboring residues from adopting an alternate protein fold. These sequences with secondary structural specificity determinants have very strong local propensity to fold into a specific secondary structure and may affect overall protein folding by acting as a folding initiation site.     

The two-stranded alpha-helical coiled-coil is an ideal model for studying protein stability and subunit interactions.

We have designed de novo a two-stranded alpha-helical coiled-coil which consists of two identical 35-residue polypeptide chains arranged in a parallel and in-register alignment. Their structure is stabilized by interchain hydrophobic interactions from hydrophobes at positions "a" and "d" of a repeating heptad sequence. The formation and stability of the coiled-coil is dependent on peptide concentration due to the monomer-dimer equilibrium. In contrast, that coiled-coil containing an inter-helical disulfide bond does not show any concentration dependence in the guanidine hydrochloride denaturation experiments as expected. Replacement of one large hydrophobic Leu residue in each chain with Ala significantly decreases coiled-coil stability in both the reduced and oxidized coiled-coils [decreases in transition midpoint of 1.6M (2.3-0.7) and 2.4M (5.3-2.9), respectively]. A large pH dependence on coiled-coil stability is observed over the pH range 4 to 7 (transition midpoints at pH 4, 5, 5.5, 6 and 7 were 3.8, 3.2, 2.0, 1.2 and 0.7M, respectively). The increasing stability with decreasing pH correlates with the protonation of the Glu acid side-chains and reduction of intrachain repulsions between Glu-Glu side-chains in positions i, i + 3 or i, i + 4 along each alpha-helix of the coiled-coil. In addition, coiled-coil stability increases with increasing ionic strength.     

Optimization of aromatic side chain size complementarity in the hydrophobic core of a designed coiled-coil.

The coiled-coil structure plays an important roles, especially in protein assembly. Previously we constructed AAB-type heterotrimeric coiled-coils by manipulating the packing in the hydrophobic core using Trp and Ala residues, where one Trp and two Ala residues were placed in the hydrophobic core instead of three Ile residues. To optimize the packing complementarity in the hydrophobic core, we investigated the effects of introducing various aromatic amino acids on the formation of an AAB-type heterotrimeric coiled-coil, by circular dichroism, thermal stability, and nuclear magnetic resonance (NMR) studies. We found that the Phe residue was more suitable for heterotrimeric coiled-coil formation than the Trp residue, when combined with two Ala residues, whereas the Tyr and His residues did not induce the coiled-coil structure efficiently.     

Helix capping interactions stabilize the N-terminus of the kinesin neck coiled-coil

In an effort to understand how specific structural features within the kinesin neck, a region of the heavy chain located between the catalytic core and stalk domains, may contribute to motor processivity (an ability to remain attached to the microtubule filament), we have prepared several synthetic peptides corresponding to the neck region of human conventional kinesin and determined their secondary structure content and stability by CD spectroscopy. Our results show that the coiled-coil dimerization domain within the human kinesin neck region corresponds to residues 337 to 369 in solution, and thus is in excellent agreement with the recent X-ray crystallographic structures of rat brain kinesin. Further, we show that the first and last heptads of this region are absolutely critical for creating the high stability and association of the dimeric structure. Interestingly, addition of the 7 N-terminal neck-linker residues (330-336) to the coiled-coil domain significantly increased its stability (Delta GdnHCl midpoint of 1 M or an increase of approximately 1.5 kcal/mol), indicating that a strong structural link exists between the neck-linker and coiled-coil region. Subsequent high-resolution structural analysis of the residues located at the junction of the neck-linker and coiled-coil revealed the presence of the two helix capping motifs, the capping box (a reciprocal interaction of Thr 336 with Gln 339) and the hydrophobic staple (a hydrophobic packing interaction of Leu 335 with Trp 340). Substitution of Leu 335 and Thr 336 (the capping residues) with Gly completely eliminated the increased stability of the coiled-coil region observed in the presence of the neck-linker residues. Correspondingly, substitution of Trp 340, the first hydrophobic core d position residue of the coiled-coil, with an Ala residue resulted in a greater than expected decrease in stability and helicity of the coiled-coil structure. Subsequent analysis of the X-ray structure and substitution analysis of Lys 341 revealed that Trp 340 makes an important interchain hydrophobic interaction with Lys 341 of the opposite chain. Taken together these results reveal that a set of strong intra- and inter-chain interactions made up of the helix "capping box," "hydrophobic staple," and the newly identified "Leu-Trp-Lys sandwich" motifs stabilize the kinesin neck coiled-coil structure, thus preventing it from fraying and unfolding.     

Universality and structure of the N-end rule

Our previous work has shown that, in the yeast Saccharomyces cerevisiae, any of the eight stabilizing amino-terminal residues confers a long (greater than 20 h) half-life on a test protein beta-galactosidase (beta gal), whereas 12 destabilizing amino-terminal residues confer on beta gal half-lives from less than 3 min to 30 min. We now show that an analogous single-residue code (the N-end rule) operates in an in vitro system derived from mammalian reticulocytes. We also show that the N-end rule has a hierarchical structure. Specifically, amino-terminal Glu and Asp (and also Cys in reticulocytes) are secondary destabilizing residues in that they are destabilizing through their ability to be conjugated to primary destabilizing residues such as Arg. Amino-terminal Gln and Asn are tertiary destabilizing residues in that they are destabilizing through their ability to be converted, via selective deamidation, into secondary destabilizing residues Glu and Asp. Furthermore, in reticulocytes, distinct types of the N-end-recognizing activity are shown to be specific for three classes of primary destabilizing residues: basic (Arg, Lys, His), bulky hydrophobic (Phe, Leu, Trp, Tyr), and small uncharged (Ala, Ser, Thr). Features of the N-end rule in reticulocytes suggest that the exact form of the N-end rule may depend on the cell's physiological state, thereby providing a mechanism for selective destruction of preexisting proteins upon cell differentiation.     

Molecular dynamics guided study of salt bridge length dependence in both fluorinated and non-fluorinated parallel dimeric coiled-coils

The alpha-helical coiled-coil is one of the most common oligomerization motifs found in both native and engineered proteins. To better understand the stability and dynamics of the coiled-coil motifs, including those modified by fluorination, several fluorinated and nonfluorinated parallel dimeric coiled-coil protein structures were designed and modeled. We also attempt to investigate how changing the length and geometry of the important stabilizing salt bridges influences the coiled-coil protein structure. Molecular dynamics (MD) and free energy simulations with AMBER used a particle mesh Ewald treatment of the electrostatics in explicit TIP3P solvent with balanced force field treatments. Preliminary studies with legacy force fields (ff94, ff96, and ff99) show a profound instability of the coiled-coil structures in short MD simulation. Significantly, better behavior is evident with the more balanced ff99SB and ff03 protein force fields. Overall, the results suggest that the coiled-coil structures can readily accommodate the larger acidic arginine or S-2,7-diaminoheptanedoic acid mutants in the salt bridge, whereas substitution of the smaller L-ornithine residue leads to rapid disruption of the coiled-coil structure on the MD simulation time scale. This structural distortion of the secondary structure allows both the formation of large hydration pockets proximal to the charged groups and within the hydrophobic core. Moreover, the increased structural fluctuations and movement lead to a decrease in the water occupancy lifetimes in the hydration pockets. In contrast, analysis of the hydration in the stable dimeric coiled-coils shows high occupancy water sites along the backbone residues with no water occupancy in the hydrophobic core, although transitory water interactions with the salt bridge residues are evident. The simulations of the fluorinated coiled-coils suggest that in some cases fluorination electrostatically stabilizes the intermolecular coiled-coil salt bridges. Structural analyses also reveal different side chain rotamer preferences for leucine when compared with 5,5,5,5',5',5'-hexafluoroleucine mutants. These observed differences in the side chain rotamer populations suggest differential changes in the side chain conformational entropy upon coiled-coil formation when the protein is fluorinated. The free energy of hydration of the isolated 5,5,5,5',5',5'-hexafluoroleucine amino acid is calculated to be 1.1 kcal/mol less stable than leucine; this hydrophobic penalty in the monomer may provide a driving force for coiled-coil dimer formation. Estimation of the ellipticity at 222 nm from a series of snapshots from the MD simulations with DicroCalc shows distinct increases in the ellipticity when the coiled-coil is fluorinated, which suggests that the helicity in the folded coiled-coils is greater when fluorinated.     

Transmission of Stability Information through the N-domain of Tropomyosin Is Interrupted by a Stabilizing Mutation (A109L) in the Hydrophobic Core of the Stability Control Region (Residues 97–118)

Tropomyosin (Tm) is an actin-binding, thin filament, two-stranded α-helical coiled-coil critical for muscle contraction and cytoskeletal function. We made the first identification of a stability control region (SCR), residues 97–118, in the Tm sequence that controls overall protein stability but is not required for folding. We also showed that the individual α-helical strands of the coiled-coil are stabilized by Leu-110, whereas the hydrophobic core is destabilized in the SCR by Ala residues at three consecutive d positions. Our hypothesis is that the stabilization of the individual α-helices provides an optimum stability and allows functionally beneficial dynamic motion between the α-helices that is critical for the transmission of stabilizing information along the coiled-coil from the SCR. We prepared three recombinant (rat) Tm(1–131) proteins, including the wild type sequence, a destabilizing mutation L110A, and a stabilizing mutation A109L. These proteins were evaluated by circular dichroism (CD) and differential scanning calorimetry. The single mutation L110A destabilizes the entire Tm(1–131) molecule, showing that the effect of this mutation is transmitted 165 Å along the coiled-coil in the N-terminal direction. The single mutation A109L prevents the SCR from transmitting stabilizing information and separates the coiled-coil into two domains, one that is ∼9 °C more stable than wild type and one that is ∼16 °C less stable. We know of no other example of the substitution of a stabilizing Leu residue in a coiled-coil hydrophobic core position d that causes this dramatic effect. We demonstrate the importance of the SCR in controlling and transmitting the stability signal along this rodlike molecule.     

Design and synthesis of 3alpha-helix peptides forming a cavity for a fluorescent ligand

As a model of receptor protein, a series of 3alpha-helix bundle peptides constructed on a template peptide were designed so as to possess a hydrophobic cavity. The size of cavity was modulated by simple replacements of Leu residues to Ala residues in the hydrophobic core. Binding abilities to 8-anilino-1-naphthalenesulfonic acid (ANS) were estimated by the increase of fluorescence intensity. The peptide having three or four Ala residues in the hydrophobic core remarkably increased the binding ability for ANS, though the peptide having two Ala residues gave an inefficient cavity for ANS. The peptide having six Ala residues decreased the binding ability due to crucial destabilization of the helix bundle structure. This scaffold can be utilized to a receptor model, while further tuning of the sequence is necessary.     

De novo design of a pentameric coiled-coil: decoding the motif for tetramer versus pentamer formation in water-soluble phospholamban.

Water-soluble phospholamban (WSPLB) is a designed, water-soluble analogue of the pentameric membrane protein phospholamban (PLB), which contains the same core and interhelical residues as PLB, with only the solvent-exposed positions mutated. WSPLB contains the same secondary and quaternary structure as PLB. The hydrophobic cores of PLB and WSPLB contain Leu and Ile at the a- and d-positions of a heptad repeat (abcdefg) from residues 31-52, while residues 21-30 are rich in polar amino acids at these positions. While the full-length WSPLB forms pentamers in solution, truncated peptides lacking residues 21-30 are largely tetrameric. Thus, truncation of residues 1-20 promotes a switch from pentamer to tetramer formation. Here, the motifs for WSPLB pentamerization were elucidated by characterizing a series of peptides, which were progressively truncated in this polar 'switch' region. When fully present, the 'switch' region promotes pentamer formation in WSPLB, by destabilizing a more stable tetrameric species which exists in its absence. We find that the burial of hydrogen bonding residues from 21 to 30 drives WSPLB from a tetramer to a pentamer, with direct implications for coiled-coil design.     

Protein destabilization by electrostatic repulsions in the two-stranded alpha-helical coiled-coil/leucine zipper.

The destabilizing effect of electrostatic repulsions on protein stability has been studied by using synthetic two-stranded alpha-helical coiled-coils as a model system. The native coiled-coil consists of two identical 35-residue polypeptide chains with a heptad repeat QgVaGbAcLdQeKf and a Cys residue at position 2 to allow formation of an interchain disulfide bridge. This peptide, designed to contain no intrahelical or interhelical electrostatic interactions, forms a stable coiled-coil structure at 20 degrees C in benign medium (50 mM KCl, 25 mM PO4, pH 7) with a [urea]1/2 value of 6.1 M. Four mutant coiled-coils were designed to contain one or two Glu substitutions for Gln per polypeptide chain. The resulting coiled-coils contained potential i to i' + 5 Glu-Glu interchain repulsions (denoted as peptide E2(15,20)), i to i' + 2 Glu-Glu interchain repulsions (denoted E2(20,22)), or no interchain ionic interactions (denoted E2(13,22) and E1(20)). The stabilities of the coiled-coils were determined by measuring the ellipticities at 222 nm as a function of urea or guanidine hydrochloride concentration at 20 degrees C in the presence and absence of an interchain disulfide bridge. At pH 7, in the presence of urea, the stabilities of E2(13,22) and E2(20,22) were identical suggesting that the potential i to i' + 2 interchain Glu-Glu repulsion in the E2(20,22) coiled-coil does not occur. In contrast, the mutant E2(15,20) is substantially less stable than E2(13,22) or E2(15,20) by 0.9 kcal/mol due to the presence of two i to i' + 5 interchain Glu-Glu repulsions, which destabilize the coiled-coil by 0.45 kcal/mol each. At pH 3 the coiled-coils were found to increase in stability as the number of Glu substitutions were increased. This, combined with reversed-phase HPLC results at pH 7 and pH 2, supports the conclusion that the protonated Glu side chains present at low pH are significantly more hydrophobic than Gln side chains which are in turn more hydrophobic than the ionized Glu side chains present at neutral pH. The protonated Glu residues increase the hydrophobicity of the coiled-coil interface leading to higher coiled-coil stability. The guanidine hydrochloride results at pH 7 show similar stabilities between the native and mutant coiled-coils indicating that guanidine hydrochloride masks electrostatic repulsions due to its ionic nature and that Glu and Gln in the e and g positions of the heptad repeat have very similar effects on coiled-coil stability in the presence of GdnHCl.     

The Alacoil: A very tight,antiparallel coiled-coil of helices

The Alacoil is an antiparallel (rather than the usual parallel) coiled-coil of α-helices with Ala or another small residue in every seventh position, allowing a very close spacing of the helices (7.5–8.5 Å between local helix axes), often over four or five helical turns. It occurs in two distinct types that differ by which position of the heptad repeat is occupied by Ala and by whether the closest points on the backbone of the two helices are aligned or are offset by half a turn. The aligned, or ROP, type has Ala in position “d” of the heptad repeat, which occupies the “tip-to-tip” side of the helix contact where the Cα–Cβ bonds point toward each other. The more common offset, or ferritin, type of Alacoil has Ala in position “a” of the heptad repeat (where the Cα-Cβ bonds lie back-to-back, on the “knuckle-touch” side of the helix contact), and the backbones of the two helices are offset vertically by half a turn. In both forms, successive layers of contact have the Ala first on one and then on the other helix. The Alacoil structure has much in common with the coiled-coils of fibrous proteins or leucine zippers: both are α-helical coiled-coils, with a critical amino acid repeated every seven residues (the Leu or the Ala) and a secondary contact position in between. However, Leu zippers are between aligned, parallel helices (often identical, in dimers), whereas Alacoils are between antiparallel helices, usually offset, and much closer together. The Alacoil, then, could be considered as an “Ala anti-zipper.” Leu zippers have a classic “knobs-into-holes” packing of the Leu side chain into a diamond of four residues on the opposite helix; for Alacoils, the helices are so close together that the Ala methyl group must choose one side of the diamond and pack inside a triangle of residues on the other helix. We have used the ferritin-type Alacoil as the basis for the de novo design of a 66-residue, coiled helix hairpin called “Alacoilin.” Its sequence is: cmSP DQWDKE A AQYDAHA QE FEKKS HRNng TPEA DQYRHM A SQY QAMA QK LKAIA NQLKK Gseter (with “a” heptad positions underlined and nonhelical parts in lowercase), which we will produce and test for both stability and uniqueness of structure.