Nanomolar detection of hydrogen peroxide at a new polynuclear cluster of tin pentacyanonitrosylferrate nanoparticle-modified carbon ceramic electrode

This work describes a new electrochemical sensor for hydrogen peroxide based on tin pentacyanonitrosylferrate (SnPCNF)-modified carbon ceramic electrode (CCE). The modified electrode was constructed by using a sol-gel technique involving two steps: construction of CCE containing metallic tin (Sn) powder and then electrochemical creation of SnPCNF film on the surface of CCE. The modified electrode was characterized by energy-dispersive X-ray, Fourier transform infrared, scanning electron microscopy, and cyclic voltammetry (CV) techniques. The charge transfer coefficient (α) and charge transfer rate constant (k_s) for the modifying film were calculated. The electrocatalytic activity of the modified electrode toward the reduction of hydrogen peroxide was studied by CV and chronoamperometry. A linear calibration curve was obtained over the hydrogen peroxide concentration range of 0.5 to 69.4 μM using a hydrodynamic amperometric technique. The limit of detection (for a signal-to-noise ratio of 3) and sensitivity were found to be 92 nM and 0.89 μA/μM, respectively. Furthermore, the diffusion coefficient of hydrogen peroxide (D) and catalytic rate constant (k_cat) were calculated.     

Determination of nanomolar uric and ascorbic acids using enlarged gold nanoparticles modified electrode

Individual and simultaneous determination of 50 nM uric acid (UA) and ascorbic acid (AA) using enlarged, citrate-stabilized gold nanoparticles (AuNPs) self-assembled to 2,5-dimercapto-1,3,4-thiadiazole (DMT) monolayer modified Au (Au/DMT) electrode by an amperometric method is described for the first time. Self-assembly of AuNPs on the electrode surface was confirmed by atomic force microscopy (AFM), attenuated total reflectance FT-IR and diffuse reflectance spectral measurements. The electron transfer reaction (ETR) of [Fe(CN)₆]^3−/4− was blocked at Au/DMT electrode, whereas it was restored with a peak separation of 200 mV after the attachment of AuNPs on the Au/DMT (Au/DMT/AuNPs) electrode, which was confirmed from the ETR of the [Fe(CN)₆]^3−/4− redox couple. When the self-assembled AuNPs were enlarged by hydroxylamine seeding, the ETR of [Fe(CN)₆]^3−/4− was improved significantly with a peak separation of 100 mV. Tapping mode AFM showed that the average size of the enlarged-AuNPs (E-AuNPs) was 50-70 nm. The E-AuNPs modified electrode catalyzes the oxidation of AA and UA, separates their voltammetric signals by 200 mV, and has excellent sensitivity towards AA and UA with a detection limit of 50 nM. The practical application of the modified electrode was demonstrated by measuring the concentration of UA in blood serum and urine.     

Electrochemical behaviors of amino acids at multiwall carbon nanotubes and Cu2O modified carbon paste electrode

A carbon paste electrode modified with multiwall carbon nanotubes and copper(I) oxide (MWCNT-Cu₂O CPME) was fabricated, and the electrochemical behaviors of 19 kinds of natural amino acids at this modified electrode were studied. The experimental results showed that the various kinds of amino acids without any derivatization displayed obvious oxidation current responses at the modified electrode. It was also found that the current response values of amino acids were dependent mainly on pH values of buffer solutions. The phenomenon could be explained by the fact that the amino acids suffered complexation or electrocatalytic oxidation processes under different pH values. Six kinds of amino acids (arginine, tryptophan, histidine, threonine, serine, and tyrosine), which performed high-oxidation current responses in alkaline buffers, were selected to be detected simultaneously by capillary zone electrophoresis coupled with amperometric detection (CZE-AD). These amino acids could be perfectly separated within 20 min, and their detection limits were as low as 10⁻⁷ or 10⁻⁸ mol L⁻¹ magnitude (signal/noise ratio = 3). The above results demonstrated that MWCNT-Cu₂O CPME could be successfully employed as an electrochemical sensor for amino acids with some advantages of convenient preparation, high sensitivity, and good repeatability.     

Nickel(II)-baicalein complex modified multiwall carbon nanotube paste electrode and its electrocatalytic oxidation toward glycine

A modified electrode, nickel(II)-baicalein complex modified multiwall carbon nanotube paste electrode (Ni(II)-BA-MWCNT-PE), has been fabricated by electrodepositing Ni(II)-BA complex on the surface of MWCNT-PE in alkaline solution. The Ni(II)-BA-MWCNT-PE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni(II)-BA-carbon paste electrode (CPE). It also shows better electrocatalytic activity toward the oxidation of glycine than Ni(II)-MWCNT-PE. Kinetic parameters such as the electron transfer coefficient α, rate constant k_s of the electrode reaction, the diffusion coefficient D of glycine, and the catalytic rate constant k_cat of the catalytic reaction are determined. Moreover, the catalytic currents present linear dependence on the concentration of glycine from 20 μM to 1.0 mM by amperometry. The detection limit and sensitivity are 9.2 μM and 3.92 μA mM⁻¹, respectively. The modified electrode for glycine determination is of the property of simple preparation, fast response, and good stability.     

A nanocomposite/crude extract enzyme-based xanthine biosensor

A novel amperometric biosensor for xanthine was developed based on covalent immobilization of crude xanthine oxidase (XOD) extracted from bovine milk onto a hybrid nanocomposite film via glutaraldehyde. Toward the preparation of the film, a stable colloids solution of core–shell Fe₃O₄/polyaniline nanoparticles (PANI/Fe₃O₄ NPs) was dispersed in solution containing chitosan (CHT) and H₂PtCl₆ and electrodeposited over the surface of a carbon paste electrode (CPE) in one step. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrophotometry, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) were used for characterization of the electrode surface. The developed biosensor (XOD/CHT/Pt NPs/PANI/Fe₃O₄/CPE) was employed for determination of xanthine based on amperometric detection of hydrogen peroxide (H₂O₂) reduction at –0.35 V (vs. Ag/AgCl). The biosensor exhibited a fast response time to xanthine within 8 s and a linear working concentration range from 0.2 to 36.0 μM (R² = 0.997) with a detection limit of 0.1 μM (signal/noise [S/N] = 3). The sensitivity of the biosensor was 13.58 μA μM⁻¹ cm⁻². The apparent Michaelis–Menten (K_m) value for xanthine was found to be 4.7 μM. The fabricated biosensor was successfully applied for measurement of fish and chicken meat freshness, which was in agreement with the standard method at the 95% confidence level.     

Fabrication of polyphenol biosensor based on laccase immobilized on copper nanoparticles/chitosan/multiwalled carbon nanotubes/polyaniline-modified gold electrode

A high-performance amperometric polyphenol biosensor was developed, based on covalent immobilization of Ganoderma sp. laccase onto copper nanoparticles (CuNP's)/chitosan (CHIT)/carboxylated multiwalled carbon nanotube (cMWCNT)/polyaniline (PANI)-modified gold (Au) electrode. The CuNP's and cMWCNT had a synergistic electrocatalytic effect in the matrix of CHIT. The biosensor showed optimum response at pH 6.0 (0.1 M acetate buffer) and 35 °C, when operated at 50 mV s⁻¹. The biosensor exhibited excellent sensitivity (the detection limit was down to 0.156 μM for guaiacol), fast response time (less than 4 s) and wide linear range (from 1 to 500 μM). Analytical recovery of added guaiacol was 96.40-98.46%. Within batch and between batch coefficients of variation were <2.6% and <5.3%, respectively. The enzyme electrode was used 300 times over a period of 7 months, when stored at 4 °C.     

Simultaneous determination of catecholamines, uric acid and ascorbic acid at physiological levels using poly(N-methylpyrrole)/Pd-nanoclusters sensor

An interesting electrochemical sensor has been constructed by the electrodeposition of palladium nanoclusters (Pd_nano) on poly(N-methylpyrrole) (PMPy) film-coated platinum (Pt) electrode. Cyclic voltammetry, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy were used to characterize the properties of the modified electrode. It was demonstrated that the electroactivity of the modified electrode depends strongly on the electrosynthesis conditions of the PMPy film and Pd_nano. Moreover, the modified electrode exhibits strong electrocatalytic activity toward the oxidation of a mixture of dopamine (DA), ascorbic acid (AA), and uric acid (UA) with obvious reduction of overpotentials. The simultaneous analysis of this mixture at conventional (Pt, gold [Au], and glassy carbon) electrodes usually struggles. However, three well-resolved oxidation peaks for AA, DA, and UA with large peak separations allow this modified electrode to individually or simultaneously analyze AA, DA, and UA by using differential pulse voltammetry (DPV) with good stability, sensitivity, and selectivity. This sensor is also ideal for the simultaneous analysis of AA, UA and either of epinephrine (E), norepinephrine (NE) or l-DOPA. Additionally, the sensor shows strong electrocatalytic activity towards acetaminophen (ACOP) and other organic compounds. The calibration curves for AA, DA, and UA were obtained in the ranges of 0.05 to 1 mM, 0.1 to 10 μM, and 0.5 to 20 μM, respectively. The detection limits (signal/noise [S/N] = 3) were 7 μM, 12 nM, and 27 nM for AA, DA, and UA, respectively. The practical application of the modified electrode was demonstrated by measuring the concentrations of AA, DA, and UA in injection sample, human serum, and human urine samples, respectively, with satisfactory results. The reliability and stability of the modified electrode gave a good possibility for applying the technique to routine analysis of AA, DA, and UA in clinical tests.     

Mixed-valency with cyanides as terminal ligands: Diruthenium(III,II) complexes with the 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine bridge and variable co-ligands (CN vs. bpy or NH3)

New diruthenium complexes (PPN)₄[(NC)₄Ru(μ-bptz)Ru(CN)₄], (PPN)₄1, and [(bpy)₂Ru(μ-bptz)Ru(CN)₄], 2, (PPN⁺ = bis(triphenylphospine)iminium; bptz = 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine; bpy = 2,2′-bipyridine), were synthesised and characterised by spectroscopic and electrochemical techniques. The comproportionation constant K_c = 10^7.0 of the mixed-valent species [(NC)₄Ru(μ-bptz)Ru(CN)₄]³⁻ as obtained by oxidation of 1⁴⁻ in CH₃CN is much lower than the K_c = 10^15.0 previously detected for [(H₃N)₄Ru(bptz)Ru(NH₃)₄]⁵⁺, reflecting the competition between CN⁻ and bptz for the π-electron density of the metals. Comparison with several other bptz-bridged diruthenium(II,III) complexes reveals an approximate correlation between K_c and the diminishing effective π acceptor capacity of the ancillary terminal ligands. In addition to the intense MLCT absorption at λ_max = 624 nm, the main IVCT (intervalence charge transfer) band of 1³⁻ was detected by spectroelectrochemistry at λ_max = 1695 nm (in CH₃CN; ε = 3200 M⁻¹ cm⁻¹). The experimental band width at half-height, Δν_1/2 = 2700 cm⁻¹, is slightly smaller than the theoretical value Δν_1/2 = 3660 cm⁻¹, calculated from the Hush approximation for Class II mixed-valent species. In agreement with comparatively moderate metal-metal coupling, the mixed-valent intermediate 1³⁻ was found to be EPR silent even at 4 K. The unsymmetrical mixed-valent complex [(bpy)₂Ru^II(μ-bptz)Ru^III(CN)₄]⁺, obtained in situ by bromine oxidation of 2 in CH₃CN/H₂O, displays a broad NIR absorption originating from an IVCT transition at λ_max = 1075 nm (ε ≈ 1000 M⁻¹ cm⁻¹, Δν_1/2 ≈ 4000 cm⁻¹). In addition, the lifetime of the excited-state of the mononuclear precursor complex [Ru(bptz)(CN)₄]²⁻ was measured in H₂O by laser flash photolysis; the obtained value of τ = 19.6 ns reveals that bptz induces a metal-to-ligand electronic delocalisation effect intermediate between that induced by bpy and bpz (bpz = 2,2′-bipyrazine) in analogous tetracyanoruthenium complexes.     

Hydrogen peroxide biosensor based on a myoglobin/hydrophilic room temperature ionic liquid film

The composite film based on Nafion and hydrophilic room temperature ionic liquid (RTIL) 1-butyl-3-methyl-imidazolium chloride ([bmim]Cl) was used as an immobilization matrix to entrap myoglobin (Mb). The study of ionic liquid (IL)-Mb interaction by ultraviolet-visible (UV-vis) spectroscopy showed that Mb retains its native conformation in the presence of IL. The immobilized Mb displayed a pair of well-defined cyclic voltammetric peaks with a formal potential (E_o^’) of −0.35 V in a 0.1 M phosphate buffer solution (PBS) of pH 7.0. The immobilized Mb exhibited excellent electrocatalytic response to the reduction of hydrogen peroxide, based on which a mediator-free amperometric biosensor for hydrogen peroxide was designed. The linear range for the determination of hydrogen peroxide was from 1.0 to 180 μM with a detection limit of 0.14 μM at a signal/noise ratio of 3. The apparent Michaelis constant () for the electrocatalytic reaction was 22.6 μM. The stability, repeatability, and selectivity of the sensor were evaluated. The proposed biosensor has a lower detection limit than many other IL-heme protein-based biosensors and is free from common interference in hydrogen peroxide biosensors.     

Electrochemical assay for the determination of nitric oxide metabolites using copper(II) chlorophyllin modified screen printed electrodes

This work presents a novel electrochemical assay for the collective measurement of nitric oxide (NO) and its metabolites nitrite (NO₂⁻) and nitrate (NO₃⁻) in volume miniaturized sample at low cost using copper(II) chlorophyllin (CuCP) modified sensor electrode. Zinc oxide (ZnO) incorporated screen printed carbon electrode (SPCE) was used as a host matrix for the immobilization of CuCP. The morphological changes of the ZnO and CuCP modified electrodes were investigated using scanning electron microscopy. The electrochemical characterization of CuCP–ZnO–SPCE exhibited the characteristic quasi-reversible redox peaks at the potential +0.06 V versus Ag/AgCl. This biosensor electrode showed a wide linear range of response over NO concentrations from 200 nM to 500 μM with a detection limit of 100 nM and sensitivity of 85.4 nA μM⁻¹. Furthermore, NO₂⁻ measurement showed linearity of 100 nM to 1 mM with a detection limit of 100 nM for NO₂⁻ and sensitivity of 96.4 nA μM⁻¹. Then, the concentration of NO₃⁻ was measured after its enzymatic conversion into NO₂⁻. Using this assay, the concentrations of NO, NO₂⁻, and NO₃⁻ present in human plasma samples before and after beetroot supplement were estimated using suitable membrane coated CuCP–ZnO–SPCE and validated with the standard Griess method.     

Role of Phe113 at the distal side of the heme domain of an oxygen-sensor (Ec DOS) in the characterization of the heme environment

The heme-based oxygen-sensor enzyme from Escherichia coli (Ec DOS) is a heme-regulated phosphodiesterase with activity on cyclic-di-GMP and is composed of an N-terminal heme-bound sensor domain with the PAS structure and a C-terminal functional domain. The activity of Ec DOS is substantially enhanced by the binding of O₂ to the Fe(II)-protoporphyrin IX complex [Fe(II) complex] in the sensor domain. The binding of O₂ to the Fe(II) complex changes the structure of the sensor domain, and this altered structure becomes a signal that is transduced to the functional domain to trigger catalysis. The first step in intra-molecular signal transduction is the binding of O₂ to the Fe(II) complex, and detailed elucidation of this molecular mechanism is thus worthy of exploration. The X-ray crystal structure reveals that Phe113 is located close to the O₂ molecule bound to the Fe(II) complex in the sensor domain. Here, we found that the O₂ association rate constants (>200 × 10⁻³ μM⁻¹ s⁻¹: F113L; 26 × 10⁻³ μM⁻¹ s⁻¹: F113Y) of the Fe(II) complexes of Phe113 mutants were markedly different from that (51 × 10⁻³ μM⁻¹ s⁻¹) of the wild-type enzyme, and auto-oxidation rates (0.00068 min⁻¹: F113L; 0.039 min⁻¹: F113Y) of the Phe113 mutants also differed greatly from that (0.0062 min⁻¹) of the wild-type enzyme. We thus suggest that Phe113, residing near the O₂ molecule, has a critical role in optimizing the Fe(II)-O₂ complex for effective regulation of catalysis by the oxygen-sensor enzyme. Interactions of CO and cyanide anion with the mutant proteins were also studied.     

A lactate biosensor based on lactate dehydrogenase/nictotinamide adenine dinucleotide (oxidized form) immobilized on a conducting polymer/multiwall carbon nanotube composite film

An amperometric lactate biosensor was developed based on a conducting polymer, poly-5,2′-5′,2′′-terthiophene-3′-carboxylic acid (pTTCA), and multiwall carbon nanotube (MWNT) composite on a gold electrode. Lactate dehydrogenase (LDH) and the oxidized form of nicotinamide adenine dinucleotide (NAD⁺) were subsequently immobilized onto the pTTCA/MWNT composite film. The modified electrode was characterized by quartz crystal microbalance (QCM), scanning electron microscopy (SEM), and electrochemical experiments. The detection signal was amplified by the pTTCA/MWNT assembly onto which a sufficient amount of enzyme was immobilized and stabilized by the covalent bond formation between the amine groups of enzyme and the carboxylic acid groups of the pTTCA/MWNT film. Experimental parameters affecting the sensor responses, such as applied potential, pH, and temperature, were assessed and optimized. Analytical performances and dynamic ranges of the sensor were determined, and the results showed that the sensitivity, stability, and reproducibility of the sensor improved significantly using pTTCA/MWNT composite film. The calibration plot was linear (r² = 0.9995) over the range of 5 to 90 μM. The sensitivity was approximately 0.0106 μA/μM, with a detection limit of 1 μM, based on a signal/noise ratio of 3. The applicability of the sensor for the analysis of l-lactate concentration in commercial milk and human serum samples was demonstrated successfully.     

Formation and structural chemistry of the unusual cyanide-bridged dinuclear species [Ru2(NN)2(CN)7] (NN = 2,2′-bipyridine or 1,10-phenanthroline)

Crystallisation of simple cyanoruthenate complex anions [Ru(NN)(CN)₄]²⁻ (NN = 2,2′-bipyridine or 1,10-phenanthroline) in the presence of Lewis-acidic cations such as Ln(III) or guanidinium cations results, in addition to the expected [Ru(NN)(CN)₄]²⁻ salts, in the formation of small amounts of salts of the dinuclear species [Ru₂(NN)₂(CN)₇]³⁻. These cyanide-bridged anions have arisen from the combination of two monomer units [Ru(NN)(CN)₄]²⁻ following the loss of one cyanide, presumably as HCN. The crystal structures of [Nd(H₂O)_5.5][Ru₂(bipy)₂(CN)₇] · 11H₂O and [Pr(H₂O)₆][Ru₂(phen)₂(CN)₇] · 9H₂O show that the cyanoruthenate anions form Ru-CN-Ln bridges to the Ln(III) cations, resulting in infinite coordination polymers consisting of fused Ru₂Ln₂(μ-CN)₄ squares and Ru₄Ln₂(μ-CN)₆ hexagons, which alternate to form a one-dimensional chain. In [CH₆N₃]₃[Ru₂(bipy)₂(CN)₇] · 2H₂O in contrast the discrete complex anions are involved in an extensive network of hydrogen-bonding involving terminal cyanide ligands, water molecules, and guanidinium cations. In the [Ru₂(NN)₂(CN)₇]³⁻ anions themselves the two NN ligands are approximately eclipsed, lying on the same side of the central Ru-CN-Ru axis, such that their peripheries are in close contact. Consequently, when NN = 4,4′-^tBu₂-2,2′-bipyridine the steric bulk of the t-butyl groups prevents the formation of the dinuclear anions, and the only product is the simple salt of the monomer, [CH₆N₃]₂[Ru(^tBu₂bipy)(CN)₄] · 2H₂O. We demonstrated by electrospray mass spectrometry that the dinuclear by-product [Ru₂(phen)₂(CN)₇]³⁻ could be formed in significant amounts during the synthesis of monomeric [Ru(phen)(CN)₄]²⁻ if the reaction time was too long or the medium too acidic. In the solid state the luminescence properties of [Ru₂(bipy)₂(CN)₇]³⁻ (as its guanidinium salt) are comparable to those of monomeric [Ru(bipy)(CN)₄]²⁻, with a ³MLCT emission at 581 nm.     

Kinetics study of the substitution reaction of fac-[Fe(CN)2(CO)3I] with PPh3

Substitution reaction of fac-[Fe^II(CN)₂(CO)₃I]⁻ with triphenylphosphine (PPh₃) produced mono phosphine substituted complex cis-cis-[Fe^II(CN)₂(CO)₂(PPh₃)I]⁻. Crystal structure of the product showed that carbonyl positioned trans- to iodide was replaced by PPh₃. The substitution reaction was monitored by quantitative infrared spectroscopic method, and the rate law for the substitution reaction was determined to be rate = k[[Fe^II(CN)₂(CO)₂(PPh₃)I]⁻][PPh₃]. Transition state enthalpy and entropy changes were obtained from Eyring equation k = (k_BT/h)exp(−ΔH^≠/RT + ΔS^≠/R) with ΔH^≠ = 119(4) kJ mol⁻¹ and ΔS^≠ = 102(10) J mol⁻¹ K⁻¹. Positive transition state entropy change suggests that the substitution reaction went through a dissociative pathway.     

Large catalase based bioelectrode for biosensor application

A large catalase (CAT) (Mr ~ 90 kDa), immobilized on multiwalled carbon nanotubes—Nafion^® (MWCNT-NF) matrix and encapsulated with polyethylenimine (PEI) on glassy carbon electrode (GCE), showed a pair of nearly reversible cyclic voltammetric peaks for Fe^(III)/Fe^(II) couple with formal potential of about −0.45 V (vs. Ag/AgCl electrode at pH 7.5). PEI significantly reduced the charge transfer resistance and stabilized the bioelectrode through electrostatic interaction. The electron transfer rate constant and surface coverage of the immobilized CAT were 1.05 ± 0.2 s⁻¹ and 2.1 × 10⁻¹⁰ mol cm⁻², respectively. Studies on electrocatalytic activity and kinetics of GCE/MWCNT-NF/CAT/PEI for hydrogen peroxide (H₂O₂) showed the apparent Michaelis-Menten constant of 3 mM, linear response in the range of 10 μM to 5 mM, response time of ~ 2 s for steady state current, and detection limit of ~ 1 μM. A high operational and storage stability was also demonstrated for the bioelectrode. Hence, the direct electrochemistry of the large catalase and its potential biosensor application have been established through this investigation.     

Electrolyte effects on the intervalence transition within discrete binuclear cyano-bridged complexes. An estimation of activation free energy from static, optical and electrochemical data

A study of the metal-to-metal charge-transfer (MMCT) transition within the binuclear cyano-bridged complexes cis-[L¹³Co^III(μ-NC)Fe^II(CN)₅]⁻ (L¹³ = 12-methyl-1,4,7,10-tetraazacyclotridecan-12-amine), trans-[L¹⁴Co^III(μ-NC)Fe^II(CN)₅]⁻ (L¹⁴ = 6-methyl-1,4,8,11-tetraazacyclotetradecan-6-amine) and trans-[L¹⁵Co^III(μ-NC)Fe^II(CN)₅]⁻ (L¹⁵ = 10-methyl-1,4,8,12-tetraazacyclopentadecan-10-amine) has been carried out in electrolyte solutions at varying concentrations. Using these data, as well as the reaction free energies obtained from electrochemical measurements, the reorganisation and activation free energies for the forward and reverse thermal electron-transfer processes have been estimated. The changes of these parameters with the electrolyte concentration, as well as those of the energy of the maximum MMCT band and the reaction free energy, are mainly due to ion-pairing effects.     

Structure and mechanism of a cysteine sulfinate desulfinase engineered on the aspartate aminotransferase scaffold

The joint substitution of three active-site residues in Escherichia colil-aspartate aminotransferase increases the ratio of l-cysteine sulfinate desulfinase to transaminase activity 10⁵-fold. This change in reaction specificity results from combining a tyrosine-shift double mutation (Y214Q/R280Y) with a non-conservative substitution of a substrate-binding residue (I33Q). Tyr214 hydrogen bonds with O3 of the cofactor and is close to Arg374 which binds the α-carboxylate group of the substrate; Arg280 interacts with the distal carboxylate group of the substrate; and Ile33 is part of the hydrophobic patch near the entrance to the active site, presumably participating in the domain closure essential for the transamination reaction. In the triple-mutant enzyme, k_cat′ for desulfination of l-cysteine sulfinate increased to 0.5 s^− 1 (from 0.05 s^− 1 in wild-type enzyme), whereas k_cat′ for transamination of the same substrate was reduced from 510 s^− 1 to 0.05 s^− 1. Similarly, k_cat′ for β-decarboxylation of l-aspartate increased from < 0.0001 s^− 1 to 0.07 s^− 1, whereas k_cat′ for transamination was reduced from 530 s^− 1 to 0.13 s^− 1. l-Aspartate aminotransferase had thus been converted into an l-cysteine sulfinate desulfinase that catalyzes transamination and l-aspartate β-decarboxylation as side reactions. The X-ray structures of the engineered l-cysteine sulfinate desulfinase in its pyridoxal-5′-phosphate and pyridoxamine-5′-phosphate form or liganded with a covalent coenzyme-substrate adduct identified the subtle structural changes that suffice for generating desulfinase activity and concomitantly abolishing transaminase activity toward dicarboxylic amino acids. Apparently, the triple mutation impairs the domain closure thus favoring reprotonation of alternative acceptor sites in coenzyme-substrate intermediates by bulk water.     

Electrochemical DNA biosensor based on silver nanoparticles/poly(3-(3-pyridyl) acrylic acid)/carbon nanotubes modified electrode

In this work, we present an electrochemical DNA sensor based on silver nanoparticles/poly(trans-3-(3-pyridyl) acrylic acid) (PPAA)/multiwalled carbon nanotubes with carboxyl groups (MWCNTs-COOH) modified glassy carbon electrode (GCE). The polymer film was electropolymerized onto MWCNTs-COOH modified electrode by cyclic voltammetry (CV), and then silver nanoparticles were electrodeposited on the surface of PPAA/MWCNTs-COOH composite film. Thiol group end single-stranded DNA (HS-ssDNA) probe was easily covalently linked onto the surface of silver nanoparticles through a 5′ thiol linker. The DNA hybridization events were monitored based on the signal of the intercalated adriamycin by differential pulse voltammetry (DPV). Based on the response of adriamycin, only the complementary oligonucleotides gave an obvious current signal compared with the three-base mismatched and noncomplementary oligonucleotides. Under the optimal conditions, the increase of reduction peak current of adriamycin was linear with the logarithm of the concentration of the complementary oligonucleotides from 9.0 × 10⁻¹² to 9.0 × 10⁻⁹ M with a detection limit of 3.2 × 10⁻¹² M. In addition, this DNA sensor exhibited an excellent reproducibility and stability during DNA hybridization assay.     

Light-dependent phosphate uptake of a submersed macrophyte Myriophyllum spicatum L.

The uptake kinetics of phosphate (Pi) by Myriophyllum spicatum was determined from adsorption and absorption under light and dark conditions. Pi uptake was light dependent and showed saturation following the Michaelis-Menten relation (in light: V = 16.91 × [Pi](1.335 + [Pi]), R² = 0.90, p < 0.001; in the dark: V = 5.13 × [Pi](0.351 + [Pi]), R² = 0.77, p < 0.001). Around 77% of the loss of Pi in the water column was absorbed into the tissue of M. spicatum, and only 23% was adsorbed on the surface of the plant shoots. Our study shows that M. spicatum shoots have a much higher affinity (in light: 3.9 μmol g⁻¹ dw h⁻¹ μM⁻¹; in the dark: 3.7 μmol g⁻¹ dw h⁻¹ μM⁻¹) and V_max (maximum uptake rate, shoot light) for Pi uptake than many other aquatic macrophytes (in light: 0.002-0.23 μmol g⁻¹ dw h⁻¹ μM⁻¹; in the dark: 0.002-0.19 μmol g⁻¹ dw h⁻¹ μM⁻¹), which may provide a competitive advantage over other macrophytes across a wide range of Pi concentrations.     

Nitrogen nutrition of Canna indica: Effects of ammonium versus nitrate on growth, biomass allocation, photosynthesis, nitrate reductase activity and N uptake rates

The effects of inorganic nitrogen (N) source (NH₄⁺, NO₃⁻ or both) on growth, biomass allocation, photosynthesis, N uptake rate, nitrate reductase activity and mineral composition of Canna indica were studied in hydroponic culture. The relative growth rates (0.05-0.06 g g⁻¹ d⁻¹), biomass allocation and plant morphology of C. indica were indifferent to N nutrition. However, NH₄⁺ fed plants had higher concentrations of N in the tissues, lower concentrations of mineral cations and higher contents of chlorophylls in the leaves compared to NO₃⁻ fed plants suggesting a slight advantage of NH₄⁺ nutrition. The NO₃⁻ fed plants had lower light-saturated rates of photosynthesis (22.5 μmol m⁻² s⁻¹) than NH₄⁺ and NH₄⁺/NO₃⁻ fed plants (24.4-25.6 μmol m⁻² s⁻¹) when expressed per unit leaf area, but similar rates when expressed on a chlorophyll basis. Maximum uptake rates (V_max) of NO₃⁻ did not differ between treatments (24-35 μmol N g⁻¹ root DW h⁻¹), but V_max for NH₄⁺ was highest in NH₄⁺ fed plants (81 μmol N g⁻¹ root DW h⁻¹), intermediate in the NH₄NO₃ fed plants (52 μmol N g⁻¹ root DW h⁻¹), and lowest in the NO₃⁻ fed plants (28 μmol N g⁻¹ root DW h⁻¹). Nitrate reductase activity (NRA) was highest in leaves and was induced by NO₃⁻ in the culture solutions corresponding to the pattern seen in fast growing terrestrial species. Plants fed with only NO₃⁻ had high NRA (22 and 8 μmol NO₂⁻ g⁻¹ DW h⁻¹ in leaves and roots, respectively) whereas NRA in NH₄⁺ fed plants was close to zero. Plants supplied with both forms of N had intermediate NRA suggesting that C. indica takes up and assimilate NO₃⁻ in the presence of NH₄⁺. Our results show that C. indica is relatively indifferent to inorganic N source, which together with its high growth rate contributes to explain the occurrence of this species in flooded wetland soils as well as on terrestrial soils. Furthermore, it is concluded that C. indica is suitable for use in different types of constructed wetlands.