Cholesterol in condensed and fluid phosphatidylcholine monolayers studied by epifluorescence microscopy

Epifluorescence microscopy was used to investigate the effect of cholesterol on monolayers of dipalmitoylphosphatidylcholine (DPPC) and 1 -palmitoyl-2-oleoyl phosphatidylcholine (POPC) at 21 +/- 2 degrees C using 1 mol% 1-palmitoyl-2-[12-[(7-nitro-2-1, 3-benzoxadizole-4-yl)amino]dodecanoyl]phosphatidylcholine (NBD-PC) as a fluorophore. Up to 30 mol% cholesterol in DPPC monolayers decreased the amounts of probe-excluded liquid-condensed (LC) phase at all surface pressures (pi), but did not effect the monolayers of POPC, which remained in the liquid-expanded (LE) phase at all pi. At low pi (2-5 mN/m), 10 mol% or more cholesterol in DPPC induced a lateral phase separation into dark probe-excluded and light probe-rich regions. In POPC monolayers, phase separation was observed at low pi when > or =40 mol% or more cholesterol was present. The lateral phase separation observed with increased cholesterol concentrations in these lipid monolayers may be a result of the segregation of cholesterol-rich domains in ordered fluid phases that preferentially exclude the fluorescent probe. With increasing pi, monolayers could be transformed from a heterogeneous dark and light appearance into a homogeneous fluorescent phase, in a manner that was dependent on pi and cholesterol content. The packing density of the acyl chains may be a determinant in the interaction of cholesterol with phosphatidylcholine (PC), because the transformations in monolayer surface texture were observed in phospholipid (PL)/sterol mixtures having similar molecular areas. At high pi (41 mN/m), elongated crystal-like structures were observed in monolayers containing 80-100 mol% cholesterol, and these structures grew in size when the monolayers were compressed after collapse. This observation could be associated with the segregation and crystallization of cholesterol after monolayer collapse.     

Effect of cholesterol on Ca2+-induced aggregation of liposomes and calcium diphosphatidate membrane traversal

Sonicated cholesterol-phosphatidylcholine (PC) liposomes containing 4 mol % phosphatidic acid (PA) aggregate in 10 mM Ca2+, slowly at low molar fractions of cholesterol (up to 30%) and 15 times faster at higher concentrations; the inflection point is at ca. 35 mol % bilayer cholesterol. O-[[(Methoxyethoxy)ethoxy]ethyl]cholesterol (OH-blocked cholesterol) does not give this rate enhancement. If PC is replaced by diether PC (CO groups abolished), cholesterol does not accelerate aggregation at concentrations in the bilayer below 50 mol %. No change in Ca2+-induced aggregation rates was observed if the ester CO groups of the bridge-forming PA only were replaced by CH2 (diether PA) in liposomes containing PC and cholesterol. PA-mediated Ca2+ membrane traversal seems to be accelerated by the addition of cholesterol to the PC-PA membrane, but analysis shows that the effect is due to the bilayer condensation effect of cholesterol resulting in an increase in the surface concentration of PA and that membrane cholesterol in fact slightly reduces the rate of Ca(PA)2 traversal; OH-blocked cholesterol, however, increases this rate 3-fold. It appears that lipid OH and CO groups interact, directly or with the mediation of water, in establishing the structure of the membrane "hydrogen belts", i.e., the strata containing those hydrogen-bond donors and acceptors. Cholesterol hydroxyl above 33 mol % (saturation of a 2:1 PC/cholesterol complex?) causes a restructuring of the hydrogen belts that facilitates membrane-water-membrane dehydration, the prerequisite for liposome aggregation by trans-Ca(PA)2 formation. On the other hand, the formation of the dehydrated cis-Ca(PA)2 complex that precedes Ca2+ membrane traversal is not accelerated by presence of the cholesterol hydroxyl group.     

Phosphatidylcholine and cholesterol inhibit phosphatidate-mediated calcium traversal of liposomal bilayers

Rates of phosphatidic acid- (PA-) mediated Ca2+-traversal are maximal in 'passive bilayers' void of lipid CO and OH groups: dietherphosphatidylcholine (diether-PC) or OH-blocked cholesterol liposomes. Phosphatidylcholine (PC) as bilayer matrix causes 99% inhibition, while 45 mol% cholesterol in passive bilayers inhibits by about 70%. Possibly, the absence of CO and OH groups causes a dehydration of the 'hydrogen belts', i.e., the membrane strata occupied by hydrogen bond acceptors (CO of phospholipids) and donors (OH of cholesterol, sphingosine) and thereby facilitates the formation of dehydrated Ca(PA)2, the ionophoric vehicle; or (our preferred explanation) PC engages in a (non-ionophoric) Ca(PA X PC) complex and thus reduces the concentration of the ionophore, while cholesterol competes with Ca2+ for the CO groups of phosphatidic acid by hydrogen-bonding. The Ca2+-traversal rates realized in bilayers with modified hydrogen belts lend support to the speculation that a Ca(PA)2 ferry may be of physiological importance, e.g., in membranes (such as myelin) containing much ether phospholipid (plasmalogen); and that Ca2+-membrane association and traversal may be controlled by the composition of the hydrogen belts.     

Effect of lipid composition upon fusion of liposomes with Sendai virus membranes

How the lipid composition of liposomes determines their ability to fuse with Sendai virus membranes was tested. Liposomes were made of compositions designed to test postulated mechanisms of membrane fusion that require specific lipids. Fusion does not require the presence of lipids that can form micelles such as gangliosides or lipids that can undergo lamellar to hexagonal phase transitions such as phosphatidylethanolamine (PE), nor is a phosphatidylinositol (PI) to phosphatidic acid (PA) conversion required, since fusion occurs with liposomes containing phosphatidylcholine (PC) and any one of many different negatively charged lipids such as gangliosides, phosphatidylserine (PS), phosphatidylglycerol, dicetyl phosphate, PI, or PA. A negatively charged lipid is required since fusion does not occur with neutral liposomes containing PC and a neutral lipid such as globoside, sphingomyelin, or PE. Fusion of Sendai virus membranes with liposomes that contain PC and PS does not require Ca2+, so an anhydrous complex with Ca2+ or a Ca2+-induced lateral phase separation is not required although the possibility remains that viral binding causes a lateral phase separation. Sendai virus membranes can fuse with liposomes containing only PS, so a packing defect between domains of two different lipids is not required. The concentration of PS required for fusion to occur is approximately 10-fold higher than that required for ganglioside GD1a, which has been shown to act as a Sendai virus receptor. When cholesterol is added as a third lipid to liposomes containing PC and GD1a, the amount of fusion decreases if the GD1a concentration is low.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interaction of synthetic peptides of apolipoprotein C-II and lipoprotein lipase at monomolecular lipid films

The triacylglycerol hydrolyase and phospholipase A1 activities of bovine milk lipoprotein lipase toward long-chain fatty acyl ester substrates were investigated with monomolecular lipid films containing trioleoylglycerol and phosphatidylcholine. In a monolayer of egg phosphatidylcholine containing 3 mol% [14C]trioleoylglycerol, and in the presence of apolipoprotein C-II, a 79 amino acid activator protein for lipoprotein lipase, enzyme activity was maximal at a surface pressure of 21-22 mN X m-1 (37 mumol oleic acid released/h per mg enzyme); enzyme activity was enhanced 9-fold by apolipoprotein C-II. At surface pressures between 22 and 30 mN X m-1, lipoprotein lipase activity decreased over a broad range and was nearly zero at 30 mN X m-1. Apolipoprotein C-II and the synthetic fragments of the activator protein containing residues 56-79, 51-79 and 44-79 were equally effective at 20 mN X m-1 in enhancing lipoprotein lipase catalysis. However, at surface pressures between 25 and 29 mN X m-1, only apolipoprotein C-II and the phospholipid-associating fragment containing residues 44-79 enhanced enzyme catalysis. The effect of apolipoprotein C-II and synthetic peptides on the phospholipase A1 activity of lipoprotein lipase was examined in sphingomyelin:cholesterol (2:1) monolayers containing 5 mol% di[14C]myristoylphosphatidylcholine. At 22 mN X m-1, apolipoprotein C-II and the synthetic fragments containing residues 44-79 or 56-79 enhanced lipoprotein lipase activity (70-80 nmol/h per mg enzyme). In contrast to trioleoylglycerol hydrolysis, the synthetic fragments were not as effective as apolipoprotein C-II enhancing enzyme activity towards di[14C]myristoylphosphatidylcholine at higher surface pressures. We conclude that the minimal amino acid sequence of apolipoprotein C-II required for activation of lipoprotein lipase is dependent both on the lipid substrate and the packing density of the monolayer.     

Epifluorescence microscopic studies of monolayers containing mixtures of dioleoyl- and dipalmitoylphosphatidylcholines.

Monolayers of dipalmitoylphosphatidylcholine (DPPC), dioleoylphosphatidylcholine (DOPC), and some mixtures of these lipids were investigated using an epifluorescence microscopic surface balance. Monolayers were visualized at 23 +/- 1 degree C through the fluorescence of 1 mol% of two different fluorescent probes, 1-palmitoyl-2-(12-[(7-nitro-2-1,3-benzoxadizole-4- yl)amino]dodecanoyl)phosphatidylcholine (NBD-PC), which partitions into the liquid expanded (LE) or disordered lipid phase and 3,3'-dioctadecyloxacarbocyanine perchlorate (DiO-C18), which preferentially associates with the liquid condensed (LC) phase or lipid with ordered chains. LC domains were observed in pure DPPC monolayers at relatively low surface pressures (pi), and these domains grew with increasing surface pressure. Only liquid expanded phase was observed in pure DOPC monolayers up to the point of monolayer collapse. In monolayers containing 29:70:1, 49:50:1, and 69:30:1 (mol/mol/mol) of DPPC:DOPC:probe the domains of LC phase were smaller than those seen in DPPC monolayers at equivalent surface pressures. Quantitative analysis of the visual fields shown by the mixed monolayers showed a distribution of sizes of condensed domains at any given pi. At pi = 30 mN m-1, liquid-expanded, or fluid, regions occupied more than 70% of the total monolayer area in all three mixtures studied, whereas DPPC monolayers were more than 75% condensed or solid at that pressure. For monolayers of DPPC:DOPC:NBD-PC 49:50:1 and 69:30:1 the average domain size and the percentage of the total area covered with LC, or rigid, areas increased to a maximum at pi around 35 mN m-1 followed by a decrease at higher pi.(ABSTRACT TRUNCATED AT 250 WORDS)     

Pulmonary surfactant protein A interacts with gel-like regions in monolayers of pulmonary surfactant lipid extract

Epifluorescence microscopy was used to investigate the interaction of pulmonary surfactant protein A (SP-A) with spread monolayers of porcine surfactant lipid extract (PSLE) containing 1 mol % fluorescent probe (NBD-PC) spread on a saline subphase (145 mM NaCl, 5 mM Tris-HCl, pH 6.9) containing 0, 0.13, or 0.16 microg/ml SP-A and 0, 1.64, or 5 mM CaCl(2). In the absence of SP-A, no differences were noted in PSLE monolayers in the absence or presence of Ca(2+). Circular probe-excluded (dark) domains were observed against a fluorescent background at low surface pressures (pi approximately 5 mN/m) and the domains grew in size with increasing pi. Above 25 mN/m, the domain size decreased with increasing pi. The amount of observable dark phase was maximal at 18% of the total film area at pi approximately 25 mN/m, then decreased to approximately 3% at pi approximately 40 mN/m. The addition of 0.16 microg/ml SP-A with 0 or 1.64 mM Ca(2+) in the subphase caused an aggregation of dark domains into a loose network, and the total amount of dark phase was increased to approximately 25% between pi of 10-28 mN/m. Monolayer features in the presence of 5 mM Ca(2+) and SP-A were not substantially different from those spread in the absence of SP-A, likely due to a self-association and aggregation of SP-A in the presence of higher concentrations of Ca(2+). PSLE films were spread on a subphase containing 0.16 microg/ml SP-A with covalently bound Texas Red (TR-SP-A). In the absence of Ca(2+), TR-SP-A associated with the reorganized dark phase (as seen with the lipid probe). The presence of 5 mM Ca(2+) resulted in an appearance of TR-SP-A in the fluid phase and of aggregates at the fluid/gel phase boundaries of the monolayers. This study suggests that SP-A associates with PSLE monolayers, particularly with condensed or solid phase lipid, and results in some reorganization of rigid phase lipid in surfactant monolayers.     

Kinetics and thermodynamics of calcium-induced lateral phase separations in phosphatidic acid containing bilayers

The effects of calcium on the mixing of synthetic diacylphosphatidylcholines (PC's) and diacylphosphatidylethanolamines (PE's) with the corresponding phosphatidic acids (PA's) have been examined by high-sensitivity differential scanning calorimetry and by measurements of the fluorescence of labeled PA or PC species in PA-PC bilayers. Calorimetrically derived phase diagrams for dimyristoyl- and dielaidoyl-substituted PA-PC and PA-PE mixtures indicate that these species are readily miscible in the absence of calcium but phase-separate very extensively in the presence of high levels of calcium (30 mM). The limiting solubilities of PA (Ca2+) in liquid-crystalline PC or PE bilayers are less than or equal to 10 and approximately 5 mol %, respectively, while approximately 20 mol % of PC or PE can be introduced into the "cochleate" phase of PA (Ca2+) before a distinct PC-rich (or PE-rich) phase appears. The kinetics of calcium-induced lateral phase separations were examined for dioleoyl- and dielaidoyl-substituted PA-PC unilamellar vesicles labeled with fluorescent (C12-NBD-acyl) PA or PC, whose fluorescence becomes partially quenched upon phase separation. Our results indicate that, for the PA-PC system, lateral phase separation is very rapid (approximately less than 1 s) after calcium addition and develops partially (possibly in only one face of the bilayer) when calcium is present only on one side of the bilayer. Moreover, phase separations can develop at a rate faster than that of vesicle diffusion when calcium is added to dilute suspensions of vesicles, suggesting that interbilayer contacts are not essential to promote phase separations.     

Surface respreading after collapse of monolayers containing major lipids of pulmonary surfactant

Isotherms have been obtained near 37 degrees C for a series of repetitive compressions and expansions of monolayers that contain major components of lung surfactant. The minimum surface tension or maximum surface pressure which could be achieved under conditions of dynamic compression, and the rate of return of lipid from excluded phase to the monolayers were measured. Monolayers of pure 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), or of DPPC plus 10 or 30 mol% of the calcium salt of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol (POPG) (POPG-Ca) achieved very high surface pressures or low surface tensions (near 0 mN m-1), but they showed no return of material from the collapse phases under the test conditions. Monolayers of POPG-Ca alone collapsed at relatively low surface pressures (high surface tensions), but showed good return of material from the collapse phase into the monolayer. Monolayers containing more complex mixtures of lipids (DPPC, phosphatidylglycerol (PG), unsaturated phosphatidylcholine (PC), cholesterol (chol] in ratios similar to those found in surfactant achieved minimum surface tensions intermediate between those of monolayers with less complex compositions. These more complex mixtures showed a better rate of return of lipids from the collapse phases to the monolayer than did simple DPPC-POPG mixtures. 31P-NMR and differential scanning calorimetric investigations of the mixture DPPC/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine(POPC)/POP G/DPPG/chol (10:4:2:1:3) showed that in the bulk phase at 37 degrees C, it was in bilayers in the liquid-crystalline state.     

Calcium diphosphatidate membrane traversal is inhibited by common phospholipids and cholesterol but not by plasmalogen

Phosphatidate-mediated Ca2+ membrane traversal is inhibited by phospholipids (PL) such a phosphatidylcholine (PC), phosphatidylinositol (PI), phosphatidylserine (PS), sphingomyelin and lysoPC, but not by PC-plasmalogen. Kinetics of Ca2+ traversal through a 'passive' bilayer consisting of OH-blocked cholesterol show competition between PC and phosphatidic acid (PA); it appears likely that a Ca(PA.PC) complex is formed which is not a transmembrane ionophore but will reduce the amount of phosphatidic acid available for the formation of the ionophore, Ca(PA)2. PS and PI may inhibit Ca2+-traversal in the same manner by forming Ca(PA.PL) complexes. We suggest that PC-plasmalogen, with one of the Ca2+-chelating ester CO groups missing, cannot engage in calcium cages, i.e., Ca(PA.PL) complexes, and thus does not interfere with Ca(PA)2 formation. Double-reciprocal plotting of Ca2+ traversal rates in cholesterol-containing liposomes vs. calcium concentration suggests that cholesterol inhibits Ca2+ traversal by competing with Ca2+ for PA. The inhibition does not seem to be caused by a restructuring or dehydration of the membrane 'hydrogen belts' affected by cholesterol; most probably, it is due to hydrogen bonding of the cholesterol-OH group to a CO group of PA; this reduces the amount of PA available for the calcium ferry. The inhibition by sphingomyelin and lysoPC may also be explained by their OH group interacting with PA via hydrogen bonding. The pH dependence of Ca2+ traversal suggests that H[Ca(PA)2]- can serve as Ca2+ cross-membrane ferry but that at physiological pH, [Ca(PA)2]2- is the predominant ionophore. In conclusion, the results indicate that Ca2+ traversal is strongly dependent on the structure of the hydrogen belts, i.e., the membrane strata occupied by hydrogen bond acceptors (CO of phospholipids) and donors (OH of cholesterol, sphingosine), and that lipid hydrogen belt structures may regulate storage and passage of Ca2+.     

Pulmonary surfactant proteins SP-B and SP-C in spread monolayers at the air-water interface: II. Monolayers of pulmonary surfactant protein SP-C and phospholipids.

The interaction of the hydrophobic pulmonary surfactant protein SP-C with dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG) and DPPC:DPPG (7:3, mol:mol) in spread monolayers at the air-water interface has been studied. At low concentrations of SP-C (about 0.5 mol% or 3 weight%protein) the protein-lipid films collapsed at surface pressures of about 70 mN.m-1, comparable to those of the lipids alone. At initial protein concentrations higher than 0.8 mol%, or 4 weight%, the isotherms displayed kinks at surface pressures of about 50 mN.m-1 in addition to the collapse plateaux at the higher pressures. The presence of less than 6 mol%, or 27 weight%, of SP-C in the protein-lipid monolayers gave a positive deviation from ideal behavior of the mean areas in the films. Analyses of the mean areas in the protein-lipid films as functions of the monolayer composition and surface pressure showed that SP-C, associated with some phospholipid (about 8-10 lipid molecules per molecule of SP-C), was squeezed out from the monolayers at surface pressures of about 55 mN.m-1. The results suggest a potential role for SP-C to modify the composition of the monolayer at the air-water interface in the alveoli.     

Phospholipase D activity is regulated by product segregation and the structure formation of phosphatidic acid within model membranes

Phospholipase D from Streptomyces chromofuscus (scPLD) hydrolyzes phosphatidylcholines (PC) to produce choline and phosphatidic acid (PA), a lipid messenger molecule within biological membranes. To scrutinize the influence of membrane structure on scPLD activity, three different substrate-containing monolayers are used as model systems: pure dipalmitoylphosphatidylcholine (DPPC) as well as equimolar mixtures of DPPC/n-hexadecanol (C(16)OH) and DPPC/dipalmitoylglycerol (DPG). The activity of scPLD toward these monolayers is tested by infrared reflection-absorption spectroscopy and exhibits different dependencies on surface pressure. For pure DPPC, the catalytic turnover drastically drops above 20 mN/m. On addition of C(16)OH, this strong decrease starts at 5 mN/m. For the DPPC/DPG system, the reaction yield linearly decreases between 5 and 25 mN/m. The difference in scPLD activity is correlated to the phase state of the monolayers as examined by x-ray diffraction, Brewster angle microscopy, and atomic force microscopy. Because the additives C(16)OH and DPG mediate the miscibility of PC and PA, only a basal activity of scPLD is observed toward the mixed systems at higher surface pressures. At pure DPPC monolayers, scPLD is activated after the segregation of initially formed PA. Furthermore, scPLD is inhibited when the lipids in the PA-rich domains adopt an upright orientation. This phenomenon offers a self-regulating mechanism for the concentration of the second messenger PA within biological membranes.     

Acyl chain-length asymmetry alters the interfacial elastic interactions of phosphatidylcholines.

Phosphatidylcholines (PCs) with stearoyl (18:0) sn-1 chains and variable-length, saturated sn-2 acyl chains were synthesized and investigated using a Langmuir-type film balance. Surface pressure was monitored as a function of lipid molecular area at various constant temperatures between 10 degrees C and 30 degrees C. Over this temperature range, 18:0-10:0 PC displayed only liquid-expanded behavior. In contrast, di-14:0 PC displayed liquid-expanded behavior at 24 degrees C and 30 degrees C, but two-dimensional phase transitions were evident at 20 degrees C, 15 degrees C, and 10 degrees C. The average molecular area of 18:0-10:0 PC was larger than that of liquid-expanded di-14:0 PC at equivalent surface pressures, and the shapes of their liquid expanded isotherms were somewhat dissimilar. Analysis of the elastic moduli of area compressibility (Cs(-1)) as a function of molecular area revealed shallower slopes in the semilog plots of 18:0-10:0 PC compared to di-14:0 PC. At membrane-like surface pressures (e.g., 30 mN/m), 18:0-10:0 PC was 20-25% more elastic (in an in-plane sense) than di-14:0 PC. Other PCs with varying degrees of chain-length asymmetry (18:0-8:0 PC, 18:0-12:0 PC, 18:0-14:0 PC, 18:0-16:0 PC) were also investigated to determine whether the higher in-plane elasticity of fluid-phase 18:0-10:0 PC is a common feature of PCs with asymmetrical chain lengths. Two-dimensional phase transitions in 18:0-14:0 PC and 18:0-16:0 PC prevented meaningful comparison with other fluid-phase PCs at 30 mN/m. However, the Cs(-1) values for fluid-phase 18:0-8:0 PC and 18:0-12:0 PC were similar to that of 18:0-10:0 PC (85-90 mN/m). These values showed chain-length asymmetrical PCs to have 20-25% greater in-plane elasticity than fluid-phase PCs with mono- or diunsaturated acyl chains.     

GLTP-fold interaction with planar phosphatidylcholine surfaces is synergistically stimulated by phosphatidic acid and phosphatidylethanolamine

Among amphitropic proteins, human glycolipid transfer protein (GLTP) forms a structurally-unique fold that translocates on/off membranes to specifically transfer glycolipids. Phosphatidylcholine (PC) bilayers with curvature-induced packing stress stimulate much faster glycolipid intervesicular transfer than nonstressed PC bilayers raising questions about planar cytosol-facing biomembranes being viable sites for GLTP interaction. Herein, GLTP-mediated desorption kinetics of fluorescent glycolipid (tetramethyl-boron dipyrromethene (BODIPY)-label) from lipid monolayers are assessed using a novel microfluidics-based surface balance that monitors lipid lateral packing while simultaneously acquiring surface fluorescence data. At biomembrane-like packing (30–35 mN/m), GLTP uptake of BODIPY-glycolipid from POPC monolayers was nearly nonexistent but could be induced by reducing surface pressure to mirror packing in curvature-stressed bilayers. In contrast, 1-palmitoyl-2-oleoyl-phosphatidylethanolamine (POPE) matrices supported robust BODIPY-glycolipid uptake by GLTP at both high and low surface pressures. Unexpectedly, negatively-charged cytosol-facing lipids, i.e., phosphatidic acid and phosphatidylserine, also supported BODIPY-glycolipid uptake by GLTP at high surface pressure. Remarkably, including both 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphate (5 mol%) and POPE (15 mol%) in POPC synergistically activated GLTP at high surface pressure. Our study shows that matrix lipid headgroup composition, rather than molecular packing per se, is a key regulator of GLTP-fold function while demonstrating the novel capabilities of the microfluidics-based film balance for investigating protein-membrane interfacial interactions.     

Pulmonary surfactant proteins SP-B and SP-C in spread monolayers at the air-water interface: III. Proteins SP-B plus SP-C with phospholipids in spread monolayers.

Spread binary monolayers of surfactant-associated proteins SP-B and SP-C were formed at the air-water interface. Surface pressure measurements showed no interactions between the hydrophobic proteins. The effects of a mixture of SP-B plus SP-C (2:1, w/w) on the properties of monolayers of dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG), and DPPC:DPPG (7:3, mol:mol) were studied. During compression of ternary and quaternary films, containing less than 0.4 mol% or 5 weight% total protein, the proteins were not squeezed out and appeared to remain associated with the film until collapse at surface pressures of about 65-70 mN.m-1. At initial concentrations of total protein of about 0.9 mol% or 10 weight%, exclusion of protein-lipid complexes was observed at 40-50 mN.m-1. Larger amounts of phospholipid were removed by proteins from (SP-B:SP-C)/DPPG films than from (SP-B:SP-C)/DPPC ones. Separate squeeze-out of SP-B (or SP-B plus DPPC) at about 40 mN.m-1, followed by exclusion of SP-C (or SP-C plus DPPC) at about 50 mN.m-1, was observed in (SP-B:SP-C)/DPPC films. This led to a conclusion that there was independent behavior of SP-B and SP-C in (SP-B:SP-C)/DPPC monolayers. The quaternary (SP-B:SP-C)/(DPPC:DPPG) films showed qualitatively similar process of squeeze-out of the proteins. In the ternary mixtures of SP-B plus SP-C with DPPG separate exclusion of SP-B was not detected; rather, the data was consistent with exclusion of a (SP-B:SP-C)/DPPG complex at about 50 mN.m-1.(ABSTRACT TRUNCATED AT 250 WORDS)     

Phosphatidylcholine acyl unsaturation modulates the decrease in interfacial elasticity induced by cholesterol.

The effect of cholesterol on the interfacial elastic packing interactions of various molecular species of phosphatidylcholines (PCs) has been investigated by using a Langmuir-type film balance and analyzing the elastic area compressibility moduli (Cs(-1)) as a function of average cross-sectional molecular area. Emphasis was on the high surface pressure regions (pi > or = 30 mN/m) which are thought to mimic biomembrane conditions. Increasing levels of cholesterol generally caused the in-plane elasticity of the mixed monolayers to decrease. Yet, the magnitude of the cholesterol-induced changes was markedly dependent upon PC hydrocarbon structure. Among PC species with a saturated sn-1 chain but different sn-2 chain cis unsaturation levels [e.g., myristate (14:0), oleate (18:1delta9(c), linoleate (18:2delta9,12(c), arachidonate (20:4delta5,8,11,14(c), or docosahexenoate (22:6delta4,7,10,13,16,19(c)], the in-plane elasticity moduli of PC species with higher sn-2 unsaturation levels were less affected by high cholesterol mol fractions (e.g., >30 mol %) than were the more saturated PC species. The largest cholesterol-induced decreases in the in-plane elasticity were observed when both chains of PC were saturated (e.g., di-14:0 PC). When both acyl chains were identically unsaturated, the resulting PCs were 20-25% more elastic in the presence of cholesterol than when their sn-1 chains were long and saturated (e.g., palmitate). The mixing of cholesterol with PC was found to diminish the in-plane elasticity of the films beyond what was predicted from the additive behavior of the individual lipid components apportioned by mole and area fraction. Deviations from additivity were greatest for di-14:0 PC and were least for diarachidonoyl PC and didocosahexenoyl PC. In contrast to Cs(-1) analyses, sterol-induced area condensations were relatively unresponsive to subtle structural differences in the PCs at high surface pressures. Cs(-1) versus average area plots also indicated the presence of cholesterol concentration-dependent, low-pressure (<14 mN/m) phase boundaries that became more prominent as PC acyl chain unsaturation increased. Hence, area condensations measured at low surface pressures often do not accurately portray which lipid structural features are important in the lipid-sterol interactions that occur at high membrane-like surface pressures.     

Streptomyces chromofuscus phospholipase D interaction with lipidic activators at the air-water interface

The phospholipase D from Streptomyces chromofuscus (PLDSc) is a soluble enzyme that interacts with membranes to catalyse phosphatidylcholine (PC) transformation. In this work, we focused on the interaction between PLDSc and two lipid activators: a neutral lipid, diacylglycerol (DAG), and an anionic one, phosphatidic acid (PA). DAG is a naturally occurring alcohol, so it is a potent nucleophile for the transphosphatidylation reaction catalysed by PLD. Concerning PA, it is a widely described activator of PLDSc-catalysed hydrolysis of PC. The monolayer technique allowed us to define PLDSc interaction with DAG and PA. In the case of DAG, the results suggest an insertion of PLDSc within the acyl chains of the lipid with an exclusion pressure of approximately 45 mN/m. PLDSc-DAG interaction seemed to occur preferentially with the lipid in the liquid-expanded (LE) phase. PLDSc interaction with PA was found to be more effective at high surface pressures. The overall results obtained with PA show a preferential interaction of the protein with condensed PA domains. No exclusion pressure could be found for PLDSc-PA interaction indicating only superficial interaction with the polar head of this lipid. Brewster angle microscopy (BAM) images were acquired in order to confirm these results and to visualise the patterns induced by PLDSc adsorption.     

Streptomyces chromofuscus phospholipase D interaction with lipidic activators at the air-water interface

The phospholipase D from Streptomyces chromofuscus (PLDSc) is a soluble enzyme that interacts with membranes to catalyse phosphatidylcholine (PC) transformation. In this work, we focused on the interaction between PLDSc and two lipid activators: a neutral lipid, diacylglycerol (DAG), and an anionic one, phosphatidic acid (PA). DAG is a naturally occurring alcohol, so it is a potent nucleophile for the transphosphatidylation reaction catalysed by PLD. Concerning PA, it is a widely described activator of PLDSc-catalysed hydrolysis of PC.The monolayer technique allowed us to define PLDSc interaction with DAG and PA. In the case of DAG, the results suggest an insertion of PLDSc within the acyl chains of the lipid with an exclusion pressure of approximately 45 mN/m. PLDSc-DAG interaction seemed to occur preferentially with the lipid in the liquid-expanded (LE) phase.PLDSc interaction with PA was found to be more effective at high surface pressures. The overall results obtained with PA show a preferential interaction of the protein with condensed PA domains. No exclusion pressure could be found for PLDSc-PA interaction indicating only superficial interaction with the polar head of this lipid. Brewster angle microscopy (BAM) images were acquired in order to confirm these results and to visualise the patterns induced by PLDSc adsorption.     

Phospholipase C-delta3 binds with high specificity to phosphatidylinositol 4,5-bisphosphate and phosphatidic acid in bilayer membranes.

In order to acquire an understanding of phospholipase C-delta3 (PLC-delta3) action on substrate localized in lipid membrane we have studied the binding of human recombinant PLC-delta3 to large, unilamellar phospholipid vesicles (LUVs). PLC-delta3 bound weakly to vesicles composed of phosphatidylcholine (PtdCho) or PtdCho plus phosphatidylethanolamine (PtdEtn) or phosphatidylinositol (PtdIns). The enzyme bound strongly to LUVs composed of PtdEtn + PtdCho and phosphatidylinositol 4,5-bisphosphate (PtdInsP2). The binding affinity (molar partition coefficient) of PLC-delta3 to PtdEtn + PtdCho + PtdInsP2 vesicles was 7.7 x 105 m-1. High binding of PLC-delta3 was also observed for LUVs composed of phosphatidic acid (PA). Binding of PLC-delta3 to phosphatidylserine (PtdSer) vesicles was less efficient. Calculated molar partition coefficient for binding of PLC-delta3 to PA and PtdSer vesicles was 1.6 x 104 m-1 and 9.4 x 102 m-1, respectively. Presence of PA in the LUVs containing PtdInsP2 considerably enhanced the binding of PLC-delta3 to the phospholipid membrane. Binding of PLC-delta3 to phospholipid vesicles was not dependent on Ca2+ presence. In the liposome assay PA caused a concentration-dependent increase in activity of PLC-delta3. The stimulatory effect of PA on PLC-delta3 was calcium-dependent. At Ca2+ concentrations lower than 1 microm, no effect of PA on the activity of PLC-delta3 was observed. PA enhanced PLC-delta3 activity by increasing the Vmax and lowering Km for PtdInsP2. As the mol fraction of PA increased from 0-40 mol% the enzyme Vmax increased 2.3-fold and Km decreased threefold. Based on the results presented, we assume that PA supports binding of PLC-delta3 to lipid membranes by interaction with the PH domain of the enzyme. The stimulatory effect of PA depends on calcium-dependent interaction with the C2 domain of PLC-delta3. We propose that binding of PLC-delta3 to PA may serve as a mechanism for dynamic membrane association and modulation of PLC-delta3 activity.     

Phase separation is induced by phenothiazine derivatives in phospholipid/sphingomyelin/cholesterol mixtures containing low levels of cholesterol and sphingomyelin

Lipid rafts are membrane structures enriched in cholesterol, sphingomyelin and glycolipids. In majority raft-mimicking model systems high contents of cholesterol and sphingomyelin (approximately 30 mol%) are used. Existence of raft-like structures was, however, reported also in model and natural membranes containing low levels of cholesterol and sphingomyelin. In the present work differential scanning calorimetry and fluorescence spectroscopy with the use of Laurdan probe was employed to demonstrate the existence of phase separation in model systems containing DPPC with addition of 5 mol% or 10 mol% of both cholesterol and sphingomyelin. Additionally, the influence of three phenothiazine derivatives on phase separation in mixed DPPC/cholesterol/sphingomyelin bilayers was investigated. Chlorpromazine, thioridazine and trifluoperazine were able to induce phase separation in DPPC and DPPC/cholesterol/sphingomyelin bilayers in temperatures below lipid main phase transition. However, only trifluoperazine induced phase separation in temperatures close to or above main phase transition. Trifluoperazine also induced phase separation in bilayers composed of egg yolk PC or DOPC mixed with cholesterol and sphingomyelin. We concluded that presence of lipid domains can be observed in model membranes containing low levels of cholesterol and sphingomyelin. Among three phenothiazine derivatives studied, only trifluoperazine was able to induce a permanent phase separation in phosphatidylcholine/cholesterol/sphingomyelin systems.