Structural analysis of the HIV-1 gp120 V3 loop: application to the HIV-Haiti isolates

The model describing the structure and conformational preferences of the HIV-Haiti V3 loop in the geometric spaces of Cartesian coordinates and dihedral angles was generated in terms of NMR spectroscopy data published in literature. To this end, the following successive steps were put into effect: (i) the NMR-based 3D structure for the HIV-Haiti V3 loop in water was built by computer modeling methods; (ii) the conformations of its irregular segments were analyzed and the secondary structure elements identified; and (iii) to reveal a common structural motifs in the HIV-Haiti V3 loop regardless of its environment variability, the simulated structure was collated with the one deciphered previously for the HIV-Haiti V3 loop in a water/trifluoroethanol (TFE) mixed solvent. As a result, the HIV-Haiti V3 loop was found to offer the highly variable fragment of gp120 sensitive to its environment whose changes trigger the large-scale structural rearrangements, bringing in substantial altering the secondary and tertiary structures of this functionally important site of the virus envelope. In spite of this fact, over half of amino acid residues that reside, for the most part, in the functionally important regions of the gp120 protein and may present promising targets for AIDS drug researches, were shown to preserve their conformational states in the structures under review. In particular, the register of these amino acids holds Asn-25 that is critical for the virus binding with primary cell receptor CD4 as well as Arg-3 that is critical for utilization of CCR5 co-receptor and heparan sulfate proteoglycans. The conservative structural motif embracing one of the potential sites of the gp120 N-linked glycosylation was detected, which seems to be a promising target for the HIV-1 drug design. The implications are discussed in conjunction with the literature data on the biological activity of the individual amino acids for the HIV-1 gp120 V3 loop.     

Determining the invariant structure elements of the HIV-1 variable V3 loops: insight into the HIV-MN and HIV-Haiti isolates

The computer approaches that combined the 3D protein structure modeling with the mathematical statistics methods were used to compute the NMR-based 3D structures of the HIV-1 gp120 V3 loop for the HIV-MN and HIV-Haiti isolates in water as well as to compare their conformational characteristics with the purpose of determining the structure elements common for the two virus modifications. As a result, the variability of the amino acid sequence was found to stimulate the considerable structural rearrangements of the V3 loop. However, despite this fact, one functionally crucial stretch of V3 and a greater portion of its residues were shown to preserve the conformations in the viral strains of interest. To reveal the structural motifs and individual amino acids giving rise to the close conformations in the HIV-MN and HIV-Haiti V3 loops regardless of the sequence and environment variability, the simulated structures were collated with those deciphered previously in terms of NMR data in a water/trifluoroethanol mixed solvent. The structure elements and single residues of V3 residing in its biologically significant sites and keeping the conformations in all of the cases at question are considered to be the promising targets for anti-AIDS drugs studies. In this context, the structurally inflexible motifs of V3 presenting the weak units in the virus protection system may be utilized as the most convenient landing-places for molecular docking of the V3 loop and ligand structures followed by selecting chemical compounds suitable as a basis for the design of safe and effective antiviral agents.     

Determination of structurally conservative amino acids of the HIV-1 protein gp120 V3 loop as promising targets for drug design by protein engineering approaches

Based on the published NMR spectroscopy data, three-dimensional structures of the HIV-1 gp120 protein V3 loop were obtained by computer modeling in the viral strains HIV-Haiti and HIV-MN. In both cases, the secondary structure elements and conformations of irregular stretches were determined for the fragment representing the principal antigenic determinant of the virus, as well as determinants of the cellular tropism and syncytium formation. Notwithstanding the high variability of the amino acid sequence of gp120 protein, more than 50% of the V3 loop residues retained their conformations in the different HIV-1 virions. The combined analysis of the findings and the literature data on the biological activity of the individual residues of the HIV-1 V3 loop resulted in identification of its structurally conservative amino acids, which seem to be promising targets for antiviral drug design by protein engineering approaches.     

Conformation of the HIV-1 gp120 V3 loop. Structure functional analysis of the HIV-Haiti viral strain

The structural model describing the conformational preferences of the HIV-Haiti gp120 V3 loop in geometric space of dihedral angles was generated in terms of NMR spectroscopy data using the methods of computer modeling. The elements of secondary structure anti conformations of irregular stretches were deciphered for the fragment making the virus principal neutralizing determinant as well as the determinants of cell tropism and syncytium formation. The structurally conserved amino acids of the HIV-1 V3 loop, that may present the forward-looking targets for AIDS drug design, were identified based on the combined analysis of the results obtained with those derived previously. In particular, it was demonstrated that the register of these amino acids comprises Asn-25 critical for virus binding with primary cell receptor CD4 as well as Arg-3 critical for utilization of CCR5 coreceptor and heparan sulfate proteoglycan syndecans. The results obtained are discussed in conjunction with the literature data on the biological activity of individual amino acid residues of the HIV-1 gpl20 V3 loop.     

The Influence of N-Linked Glycans on the Molecular Dynamics of the HIV-1 gp120 V3 Loop

N-linked glycans attached to specific amino acids of the gp120 envelope trimer of a HIV virion can modulate the binding affinity of gp120 to CD4, influence coreceptor tropism, and play an important role in neutralising antibody responses. Because of the challenges associated with crystallising fully glycosylated proteins, most structural investigations have focused on describing the features of a non-glycosylated HIV-1 gp120 protein. Here, we use a computational approach to determine the influence of N-linked glycans on the dynamics of the HIV-1 gp120 protein and, in particular, the V3 loop. We compare the conformational dynamics of a non-glycosylated gp120 structure to that of two glycosylated gp120 structures, one with a single, and a second with five, covalently linked high-mannose glycans. Our findings provide a clear illustration of the significant effect that N-linked glycosylation has on the temporal and spatial properties of the underlying protein structure. We find that glycans surrounding the V3 loop modulate its dynamics, conferring to the loop a marked propensity towards a more narrow conformation relative to its non-glycosylated counterpart. The conformational effect on the V3 loop provides further support for the suggestion that N-linked glycosylation plays a role in determining HIV-1 coreceptor tropism.     

Modeling of the 3D structure of the HIV-Haiti immunodominant epitope

The 3D structure for the HIV-Haiti immunodominant epitope was computed in terms of NMR spectroscopy data using the theoretical procedure including a probabilistic approach in conjunction with molecular mechanics algorithms and quantum chemical methods. The immunogenic crown of the virus protein gp120 was shown to form in solution a prevalent conformation whose geometric parameters match the double beta-turn IV-IV. Two structures observed in crystal were found in the ensemble of the best-energy conformations of the HIV-Haiti principal neutralizing epitope. From a comparison of simulated structures with those computed previously for the HIV-Thailand and HIV-MN isolates, it was concluded that the immunogenic tip of gp120 gives rise to similar spatial backbone forms in different HIV-1 strains but has some inherent conformational flexibility of its individual amino acid residues. The differences in local fragment structures revealed in three isolates of HIV-1 are supposed to be important for the specificity of its binding with neutralizing antibodies.     

Dual spatial folds and different local structures of the HIV-1 immunogenic crown in various virus isolates

Local and global structural properties of the HIV-1 principal neutralizing epitope were studied in terms of NMR spectroscopy data reported in literature for the HIV-Haiti and HIV-RF isolates. To this effect, the NMR-based method comprising a probabilistic model of protein conformation in conjunction with the molecular mechanics and quantum chemical computations was used for determining the ensembles of conformers matching the NMR requirements and energy criteria. As a matter of record, the high resolution 3D structure models were constructed for the HIV-Haiti and HIV-RF immunogenic crowns, and their geometric parameters were collated with the ones of conformers derived previously for describing the conformational features of immunogenic tip of gp120 from Thailand and MN HIV-1 strains. The HIV-1 neutralization site was demonstrated to constitute in water solution highly flexible system sensitive to its environment. This inference is completely valid for the geometric space of dihedral angles where statistically significant differences in local structures of simulated conformers have been found for all virus isolates of interest. In spite of this fact, the stretch analyzed was shown to manifest a certain conservatism in the space of atomic coordinates, building up in four HIV-1 isolates two spatial folds similar to those observed in crystal for the V3 loop peptides bound to different neutralizing Fabs. The results are discussed in the light of literature data on HIV-1 neutralizing epitope structure.     

Conformational preferences of the HIV-1 principal neutralizing determinant

The model describing the conformational properties of the HIV-1 principal neutralizing determinant in the geometric space of dihedrals was generated in terms of NMR spectroscopy data published in literature. To gain an object in view, the following successive steps were put into effect: (i) the NMR-based local structures for the HIV(MN) V3 loop were determined in water and in a mixed water/trifluoroethanol (TFE) solvent (7:3), (ii) in either case, the conformations of its irregular segments were analyzed and the secondary structure elements identified, (iii) to appreciate the degree of conformational mobility of the stretch of interest, the simulated structures were compared with each other, (iv) to detect the amino acids retaining their conformations inside the diverse HIV-1 isolates, the structures computed were collated with the one derived previously for the V3 loop from Thailand isolate, and (v) as a matter of record, the structurally rigid residues, that may present the forward-looking targets for AIDS drug researches, were revealed. Summing up the principal results arising from these studies, the following conclusions were drawn: I. The HIV(MN) V3 loop offers the highly mobile fragment of gp120 sensitive to its environment whose changes trigger the large-scale structural reforms, bringing in substantial altering the secondary structure of this functionally important site of the virus envelope. II. In water, it exhibits extended site 1-14 separated by double beta-turn 15-20 with unordered region 21-35. III. Adding the TFE gives rise to destruction of the regular structure in the V3 loop N-terminal, stimulates the formation of 3(10)-helix in site 24-31, and affects also its central region 20-25 forming the HIV-1 immunogenic crown. IV. Regardless of statistically significant differences between local structures of the HIV(MN) V3 loop in water and in water/TFE solution, over one-third of residues keeps their conformational states; the register of these amino acids comprises Asn-25 critical for virus binding with primary cell receptor CD4 as well as Arg-3 critical for utilization of CCR5 coreceptor. V. There are no conserved structural motifs within the V3 loops from Minnesota and Thailand HIV-1 strains. However, perceptible portion of amino acids (more than 35%), including those appearing in the functionally important regions of gp120, holds the values of dihedral angles in which case. The implications are discussed in conjunction with the data on the experimental observations for the HIV-1 principal neutralizing determinant.     

Computer modeling of promising inhibitors of the HIV-1 subtype A replication as a framework for the rational anti-AIDS drug design

The model of the structural complex of cyclophilin B belonging to the immunophilins family with the HIV-1 subtype A V3 loop presenting the principal neutralizing determinant of the virus gp120 envelope protein as well as determinants of cell tropism and syncytium formation was generated by molecular docking methods. Based on the conformational and energy characteristics of the built complex, computer-aided design of the polypeptide able to block effectively the functionally crucial V3 segments was implemented. Analysis of the results obtained in this study and literature data suggests that the generated molecule represents a promising pharmacological substance, which may be used as the basis structure for realization of the protein engineering projects aimed to develop effective drugs for anti-AIDS therapy.     

Study on conformational homology of the HIV-1 gp120 protein V3 loop. Structural analysis of the HIV-RF and HIV-thailand viral strains

Based on NMR spectroscopy data, conformation of the HIV-RF gp120 protein V3 loop giving rise to the virus principal neutralizing determinant and also determinants of cell tropism and syncytium formation was calculated by computer modeling approaches. Elements of the HIV-RF V3 loop secondary structure and conformational states of its irregular stretches were determined. The calculated structure was compared with the conformation of the homologous stretch of the HIV-Thailand protein gp120 V3 loop, and structural elements preserved in the two viral strains were identified. Conservative elements of the HIV-1 V3 loop structure are considered to be promising targets for deriving chemically modified forms of this loop with the enhanced immunogenicity and cross-reactivity of neutralizing antibodies and also for creation of effective antiviral drugs on this base.     

Structure and Dynamics of the gp120 V3 Loop That Confers Noncompetitive Resistance in R5 HIV-1JR-FL to Maraviroc

Maraviroc, an (HIV-1) entry inhibitor, binds to CCR5 and efficiently prevents R5 human immunodeficiency virus type 1 (HIV-1) from using CCR5 as a coreceptor for entry into CD4⁺ cells. However, HIV-1 can elude maraviroc by using the drug-bound form of CCR5 as a coreceptor. This property is known as noncompetitive resistance. HIV-1_V3-M5 derived from HIV-1_JR-FLan is a noncompetitive-resistant virus that contains five mutations (I304V/F312W/T314A/E317D/I318V) in the gp120 V3 loop alone. To obtain genetic and structural insights into maraviroc resistance in HIV-1, we performed here mutagenesis and computer-assisted structural study. A series of site-directed mutagenesis experiments demonstrated that combinations of V3 mutations are required for HIV-1_JR-FLan to replicate in the presence of 1 µM maraviroc, and that a T199K mutation in the C2 region increases viral fitness in combination with V3 mutations. Molecular dynamic (MD) simulations of the gp120 outer domain V3 loop with or without the five mutations showed that the V3 mutations induced (i) changes in V3 configuration on the gp120 outer domain, (ii) reduction of an anti-parallel β-sheet in the V3 stem region, (iii) reduction in fluctuations of the V3 tip and stem regions, and (iv) a shift of the fluctuation site at the V3 base region. These results suggest that the HIV-1 gp120 V3 mutations that confer maraviroc resistance alter structure and dynamics of the V3 loop on the gp120 outer domain, and enable interactions between gp120 and the drug-bound form of CCR5.     

Structural analysis of the envelope gp120 V3 loop for some HIV-1 variants circulating in the countries of Eastern Europe

The V3 loop on gp120 from human immunodeficiency virus type 1 (HIV-1) is a focus of many research groups involved in anti-AIDS drug development because this region of the protein is a principal target for neutralizing antibodies and a major determinant for cell tropism and syncytium formation. In this study, the nucleotide sequences of the env gene region coding the V3 loop were determined by DNA sequencing methods for four novel HIV-1 strains that circulate in the countries of Eastern Europe, such as Russia, Belarus, Ukraine, etc. Based on the empirical data obtained, the 3D structures of the V3 loops associated with these viral modifications were generated by computer modeling and then compared to discover similarities in the spatial arrangement of this functionally important site of gp120. Despite the HIV-1 genetic variety, several regions of the V3 loop that contain residues critical for cell tropism were shown to be structurally invariant, which may explain its exceptional role in a co-receptor usage. These data together with those on the biological activity of the V3 individual residues clearly show that these conserved structural motifs of gp120 represent potential HIV-1 weak points most suitable for therapeutic intervention.     

Molecular Recognition of CCR5 by an HIV-1 gp120 V3 Loop

The binding of protein HIV-1 gp120 to coreceptors CCR5 or CXCR4 is a key step of the HIV-1 entry to the host cell, and is predominantly mediated through the V3 loop fragment of HIV-1 gp120. In the present work, we delineate the molecular recognition of chemokine receptor CCR5 by a dual tropic HIV-1 gp120 V3 loop, using a comprehensive set of computational tools predominantly based on molecular dynamics simulations and free energy calculations. We report, what is to our knowledge, the first complete HIV-1 gp120 V3 loop : CCR5 complex structure, which includes the whole V3 loop and the N-terminus of CCR5, and exhibits exceptional agreement with previous experimental findings. The computationally derived structure sheds light into the functional role of HIV-1 gp120 V3 loop and CCR5 residues associated with the HIV-1 coreceptor activity, and provides insights into the HIV-1 coreceptor selectivity and the blocking mechanism of HIV-1 gp120 by maraviroc. By comparing the binding of the specific dual tropic HIV-1 gp120 V3 loop with CCR5 and CXCR4, we observe that the HIV-1 gp120 V3 loop residues 13–21, which include the tip, share nearly identical structural and energetic properties in complex with both coreceptors. This result paves the way for the design of dual CCR5/CXCR4 targeted peptides as novel potential anti-AIDS therapeutics.     

Crystal structure of a human rhinovirus that displays part of the HIV-1 V3 loop and induces neutralizing antibodies against HIV-1

We report the 2.7 A resolution structure of a chimeric rhinovirus, MN-III-2, that displays part of the HIV-1 gp120 V3 loop and elicits HIV-neutralizing antibodies. The V3 loop insert is dominated by two type I beta turns. The structures of two adjacent tripeptides resemble those of analogous segments in three Fab/V3 loop peptide complexes. Although two of the three corresponding antibodies bind and neutralize MN-III-2 well, only one of the three can bind without significant rearrangement. These results suggest that the V3 loop insert: (1) can share some local conformational similarity to V3 loop sequences presented on different structural frameworks; (2) must be able to adopt multiple conformations, even in a relatively constrained environment; and (3) may mimic the conformational variability of the epitope on HIV-1, increasing the likelihood of eliciting appropriate neutralizing immune responses.     

Structural requirements for and consequences of an antiviral porphyrin binding to the V3 loop of the human immunodeficiency virus (HIV-1) envelope glycoprotein gp120

Several porphyrin derivatives were reported to have anti-HIV-1 activity. Among them, meso-teta(4-carboxyphenyl)porphine (MYCPP) and other carboxyphenyl derivatives were the most potent inhibitors (EC₅₀ < 0.7 μM). MTCPP bound to the HIV-1 enveloope glycoprotein gp120 and to full-length V3 loop peptides corresponding to several HIV-1 isolates but not to other peptides from gp120+gp41. However, it remained possible that MTCPP bound to HIV-1 envelop glycoprotein gp120 and to full-length V3 loop peptides corresponding to several HIV-1 isolates but not to other peptides from gp120+gp41. However, it remained possible that MTCPP bound to regions on gp120 which cannot be mimicked by peptides. Further characterization of the binding domain for MTCPP is important for understanding the antiviral activity of porphyrins and for the design of anit-HIV-1 drugs interfering with functions of the virus envelope. Results presented here show that: (i) deletion of the V3 loop from the gp120 sequence resulted in drastically diminished MTCPP binding, suggesting that the V3 loop is the dominant if not the only target site on gp120; (ii) this site was only partially mimicked by full-length V3 loop peptides; (iii) MTCPP binding to the gp120 V3 loop elicited allosteric effects resulting in decreased accessibility of the CD4 receptor binding site; (iv) the binding site for MTCPP lies within the central portion of the V3 loop (KSIHIGPGRAFY for the HIV-1 subtype B consensus sequence) and does not involve directly the GPG apex of the loop. These results may help in designing antiviral compounds with improved activity.     

Atomic insight into the CD4 binding-induced conformational changes in HIV-1 gp120

The entry of HIV-1 into a target cell requires gp120 and receptor CD4 as well as coreceptor CCR5/CXCR4 recognition events associated with conformational changes of the involved proteins. The binding of CD4 to gp120 is the initiation step of the whole process involving structural rearrangements that are crucial for subsequent pathways. Despite the wealth of knowledge about the gp120/CD4 interactions, details of the conformational changes occurring at this stage remain elusive. We have performed molecular dynamics simulations in explicit solvent based on the gp120/CD4/CD4i crystal structure in conjunction with modeled V3 and V4 loops to gain insight into the dynamics of the binding process. Three differentiated interaction modes between CD4 and gp120 were found, which involve electrostatics, hydrogen bond and van der Waals networks. A "binding funnel" model is proposed based on the dynamical nature of the binding interface together with a CD4-attraction gradient centered in gp120 at the CD4-Phe43-binding cavity. Distinct dynamical behaviors of free and CD4-bound gp120 were monitored, which likely represent the ground and pre-fusogenic states, respectively. The transition between these states revealed concerted motions in gp120 leading to: i) loop contractions around the CD4-Phe43-insertion cavity; ii) stabilization of the four-stranded "bridging sheet" structure; and iii) translocation and clustering of the V3 loop and the bridging sheet leading to the formation of the coreceptor binding site. Our results provide new insight into the dynamic of the underlying molecular recognition mechanism that complements the biochemical and structural studies.     

Immunophilins and HIV-1 V3 Loop For Structure-Based Anti-AIDS Drug Design

Abstract

The model of the structural complex of cyclophilin A (CycA) belonging to the immunophilins family with the HIV-MN gpl20 V3 loop was generated, and the computer-aided design of the immunophilin-derived peptide able to mask the biologically crucial V3 segments was implemented.

To this end, the following problems were solved: (i) the NMR-based conformational analysis of the HIV-MN V3 loop was put into effect, and its low energy structure fitting the input experimental observations was determined; (ii) molecular docking of this V3 structure with the X-ray conformation of CycA was carried out, and the energy refining the simulated structural complex was performed; (iii) the matrix of inter-atomic distances for the amino acids of the molecules forming part of the built over-molecular ensemble was computed, the types of interactions responsible for its stabilization were analyzed, and the CycA stretch, which accounts for the binding to V3, was identified; (iv) the most probable 3D structure for this stretch in the unbound state was predicted, and its collation with the X-ray structure for the corresponding site of CycA was performed; (v) the potential energy function and its constituents were studied for the structural complex generated by molecular docking of the V3 loop with the CycA peptide offering the virtual molecule that imitates the CycA segment, making a key contribution to the interactions of the native protein with the HIV-1 principal neutralizing determinant; (vi) as a result of the studies above, the designed molecule was shown to be capable of the efficacious blockading the functionally crucial V3 sites; and (vii) based on the joint analysis of the evidence obtained previously and in the present study, the composition of the peptide cocktail presenting the promising anti-AIDS pharmacological substance was developed.

The molecules simulated here by molecular modeling methods may become the first representatives of a new class of the chemical compounds (immunophilin-derived peptides) offering the looking-forward basic structures for the design of efficacious and safe antiviral agents.     

Accurate and efficient gp120 V3 loop structure based models for the determination of HIV-1 co-receptor usage

Background  

HIV-1 targets human cells expressing both the CD4 receptor, which binds the viral envelope glycoprotein gp120, as well as either the CCR5 (R5) or CXCR4 (X4) co-receptors, which interact primarily with the third hypervariable loop (V3 loop) of gp120. Determination of HIV-1 affinity for either the R5 or X4 co-receptor on host cells facilitates the inclusion of co-receptor antagonists as a part of patient treatment strategies. A dataset of 1193 distinct gp120 V3 loop peptide sequences (989 R5-utilizing, 204 X4-capable) is utilized to train predictive classifiers based on implementations of random forest, support vector machine, boosted decision tree, and neural network machine learning algorithms. An in silico mutagenesis procedure employing multibody statistical potentials, computational geometry, and threading of variant V3 sequences onto an experimental structure, is used to generate a feature vector representation for each variant whose components measure environmental perturbations at corresponding structural positions.     

3D Structure Model of the Principal Neutralizing Epitope of Minnesota HIV-1 Isolate

Abstract

A hierarchical procedure, using a “bottom-up” strategy and combining (i) a probabilistic approach for estimating all possible starting structures, (ii) restrained molecular mechanics algorithms for preliminary selection of all energetically preferred conformers, as well as (iii) quantum chemical computations for refining their geometry, was used to study the structural properties of the HIV-MN neutralizing epitope in terms of NMR spectroscopy data. As a result, only one of initial structures matching the experimental and theoretical data was found to be well-ground for implementing the function of immunoreactive conformation of the virus immunogenic crown. The geometric parameters of this structure in water solution were shown to correspond to a double β-turn conformation similar to that revealed in crystal for synthetic molecules imitating the central region of the HIV-MN V3 loop. The following conclusion was drawn from the comparative analysis of simulated structure with the one computed previously: the HIV-MN immunogenic tip has some inherent conformational flexibility that manifests at the alterations of hexapeptide environment and leads to the structural transitions changing the local conformation of the stretch of interest but retaining its spatial main chain fold. As a matter of record, the high resolution 3D structure model for the HIV-MN principal neutralization site was constructed, and its geometric parameters were compared with the corresponding characteristics of conformers derived earlier for describing the conformational features of immunogenic tip of gp120 from Thailand HIV-1 isolate.

The results are discussed in the light of literature data on HIV-1 neutralizing epitope structure.     

Interaction of the HIV-1 gp120 viral protein V3 loop with bacterial lipopolysaccharide: a pattern recognition inhibition

HIV-1 represents an elusive target for therapeutic compounds due to its high rate of mutation. Targeting structural patterns instead of a constantly changing specific three-dimensional structure may represent an approach that is less sensitive to viral mutations. The V3 loop of gp120 of HIV-1, which is responsible for binding of viral gp120 to CCR5 or CXCR4 coreceptors, has already been identified as an effective target for the inhibition of viral entry. The peptide derived from the V3 loop of gp120 specifically interacts with the lipid A moiety of LPS, as does the full gp120 protein. NMR analysis of V3 in complex with LPS shows formation of an amphipathic turn. The interaction between LPS and V3 relies on the structural pattern, comprising a combination of hydrophobic and charge interactions, similar to the interaction between antimicrobial peptides and LPS. LPS inhibited binding of gp120 to the surface of target T cells. Nonendotoxic LPS antagonists inhibited viral infection, demonstrating the possibility for the development of an inhibitor of HIV-1 attachment to T cells based on the recognition of a conserved structural pattern.