The Role of Negative Charge in the Delivery of Quantum Dots to Neurons

Despite our extensive knowledge of the structure of negatively charged cell surface proteoglycans and sialoglycoconjugates in the brain, we have little understanding of how their negative charge contributes to brain function. We have previously shown that intensely photoluminescent 9-nm diameter quantum dots (QDs) with a CdSe core, a ZnS shell, and a negatively charged compact molecular ligand coating (CL4) selectively target neurons rather than glia. We now provide an explanation for this selective neuronal delivery. In this study, we compared three zwitterionic QD coatings differing only in their regions of positive or negative charge, as well as a positively charged (NH₂) polyethylene glycol (PEG) coat, for their ability to deliver the cell-membrane-penetrating chaperone lipopeptide JB577 (WG(Palmitoyl)VKIKKP₉G₂H₆) to individual cells in neonatal rat hippocampal slices. We confirm both that preferential uptake in neurons, and the lack of uptake in glia, is strongly associated with having a region of greater negative charge on the QD coating. In addition, the role of negatively charged chondroitin sulfate of the extracellular matrix (ECM) in restricting uptake was further suggested by digesting neonatal rat hippocampal slices with chondroitinase ABC and showing increased uptake of QDs by oligodendrocytes. Treatment still did not affect uptake in astrocytes or microglia. Finally, the future potential of using QDs as vehicles for trafficking proteins into cells continues to show promise, as we show that by administering a histidine-tagged green fluorescent protein (eGFP-His₆) to hippocampal slices, we can observe neuronal uptake of GFP.     

Turn‐off–on chemiluminescence determination of cyanide

A flow injection chemiluminescence (FI–CL) method was developed for the determination of cyanide (CN⁻) based on the recovered CL signal by Cu²⁺ inhibiting a glutathione (GSH)‐capped CdTe quantum dot (QD) and hydrogen peroxide system. In an alkaline medium, strong CL signals were observed from the reaction of CdTe QDs and H₂O₂, and addition of Cu²⁺ could cause significant CL inhibition of the CdTe QDs–H₂O₂ system. In the presence of CN⁻, Cu²⁺ can be removed from the surface of CdTe QDs via the formation of particularly stable [Cu(CN)_n]^(n‐1)– species, and the CL signal of the CdTe QDs–H₂O₂ system was efficiently recovered. Thus, the CL signals of CdTe QDs–H₂O₂ system were turned off and turned on by the addition of Cu²⁺ and CN⁻, respectively. Further, the results showed that among the tested ions, only CN⁻ could recover the CL signal, which suggested that the CdTe QDs–H₂O₂–Cu²⁺ CL system had highly selectivity for CN⁻. Under optimum conditions, the CL intensity and the concentration of CN⁻ show a good linear relationship in the range 0.0–650.0 ng/mL (R² = 0.9996). The limit of detection for CN⁻ was 6.0 ng/mL (3σ). This method has been applied to detect CN⁻ in river water and industrial wastewater with satisfactory results. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced chemiluminescence of the fluorescein–KIO4 system by CdTe quantum dots for determination of catechol

In this paper, a novel chemiluminescence (CL) system was introduced based on the use of CdTe quantum dots (QDs) with the mixture solutions of fluorescein and potassium periodate (KIO₄) in alkaline medium. The CL signal of an ultra‐weak system was strongly enhanced in the presence of QDs. The application of CdTe QDs–fluorescein–KIO₄ system is reported for the first time. It was found that catechol had a diminishing effect on the CL reaction. Under optimal experimental conditions, CL intensity decreased linearly in a 1 to 100 μM catechol concentration range, with a 0.18 μM detection limit. A possible reaction mechanism was proposed according to the results of kinetic analyses, CL spectra, ultraviolet–visible and fluorescence spectra. The results pointed to an efficient energy transfer between the CL energy donor CdTe QDs and acceptor fluorescein. Finally, the CL method was successfully applied to the determination of catechol in environmental water samples.     

Comprehensive study of interaction between biocompatible PEG‐InP/ZnS QDs and bovine serum albumin

Polyethylene glycol (PEG) surface modified biocompatible InP/ZnS quantum dots (QDs) act as a potential alternative for conventional carcinogenic cadmium‐based quantum dots for in vivo and in vitro studies. Comprehensively, we studied the interaction between a model protein bovine serum albumin (BSA) and PEGylated toxic free InP/ZnS QDs using various spectroscopic tools such as absorption, fluorescence quenching, time resolved and synchronous fluorescence spectroscopic measurements. These studies principally show that tryptophan (Trp) residues of BSA have preferable binding affinity towards PEG‐InP/ZnS QDs surface and a blue shift in Trp fluorescence emission is a signature of conformational changes in its hydrophobic microenvironment. Photoluminescence (PL) intensity of Trp is quenched by ground state complex formation (static quenching) at room temperature. However, InP/ZnS@BSA conjugates become unstable with increasing temperature and PL intensity of Trp is quenched via dynamic quenching by PEG‐InP/ZnS QDs. Experimentally determined thermodynamic parameters for these conjugates have shown spontaneity, entropy driven and exothermic nature of bio‐conjugation. The calculated binding affinity (n ? 1, Hill coefficient) suggest that the affinity of InP/ZnS QDs for a BSA protein is not dependent on whether or not other BSA proteins are already bound to the QD surface. Energy transfer efficiency (E), Trp residue to InP/ZnS QDs distances and energy transfer rate (k_T) were all obtained from FÖrster resonance energy.     

CdTe1‐xSex/Cd0.5Zn0.5S core/shell quantum dots: core composition and property

Alloy CdTe_1‐xSe_x quantum dots (QDs) have been fabricated by an organic route using Cd, Te and Se precursors in a mixture of trioctylamine and octadecylphosphonic acid at 280 °C. The variation of photoluminescence (PL) peak wavelength of the CdTe_1‐xSe_x QDs compared with CdTe QDs confirmed the formation of an alloy structure. The Se component drastically affected the stability of CdTe_1‐xSe_x QDs. A Cd_0.5Zn_0.5S shell coating on CdTe_1‐xSe_x cores was carried out using oleic acid as a capping agent. CdTe_1‐xSe_x/Cd_0.5Zn_0.5S core/shell QDs revealed dark red PL while a yellow PL peak was observed for the CdTe_1‐xSe_x cores. The PL efficiency of the core/shell QDs was drastically increased (less than 1% for the cores and up to 65% for the core/shell QDs). The stability of QDs in various buffer solutions was investigated. Core/shell QDs can be used for biological applications because of their high stability, tunable PL and high PL efficiency. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of ethanol using permanganate–CdS quantum dot chemiluminescence system

A novel and highly sensitive chemiluminescence (CL) method for the determination of ethanol was developed based on the CdS quantum dots (QDs)–permanganate system. It was found that KMnO₄ could directly oxidize CdS QDs in acidic media resulting in relatively high CL emission. A possible mechanism was proposed for this reaction based on UV/Vis absorption, fluorescence and the generated CL emission spectra. However, it was observed that ethanol had a remarkable inhibition effect on this system. This effect was exploited in the determination of ethanol within the concentration range 12–300 µg/L, with detection at 4.3 µg/L. In order to evaluate the capability of presented method, it was satisfactorily utilized in the determination of alcohol in real samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence of the luminol–potassium periodate system enhanced by TGA–capped CdTe quantum dots for the determination of theophylline

The chemiluminescence (CL) behaviour of the luminol–potassium periodate system enhanced by CdTe quantum dots capped with thioglycolic acid (TGA–CdTe QDs) was studied using kinetic experiments, CL spectra, UV–vis absorption spectra and fluorescence spectra. The production of oxygen‐containing reactant intermediates (O₂^?? and OH^?) in the present CL system was verified by CL. The possible CL mechanism was discussed in detail. Furthermore, theophylline (THP) was determined based on its enhancement of the CL intensity of the CdTe QDs–luminol–potassium periodate system coupled with a flow‐injection technique. Under these optimized conditions, the linear range was found to be from 1.0 × 10^?8 to 1.0 × 10^?5 g/mL with a detection limit of 2.8 × 10^?9 g/mL (3σ). The recoveries for the determination of THP in tablets were from 98.2 to 99.6%.     

The behaviors of metal ions in the CdTe quantum dots–H2O2 chemiluminescence reaction and its sensing application

The behaviors of 15 kinds of metal ions in the thiol‐capped CdTe quantum dots (QDs)–H₂O₂ chemiluminescence (CL) reaction were investigated in detail. The results showed that Ag⁺, Cu²⁺ and Hg²⁺ could inhibit CdTe QDs and H₂O₂ CL reaction. A novel CL method for the selective determination of Ag⁺, Cu²⁺ and Hg²⁺ was developed, based on their inhibition of the reaction of CdTe QDs and H₂O₂. Under the optimal conditions, good linear relationships were realized between the CL intensity and the logarithm of concentrations of Ag⁺, Cu²⁺ and Hg²⁺. The linear ranges were from 2.0 × 10^?6 to 5.0 × 10^?8 mol L^?1 for Ag⁺, from 5.0 × 10^?6 to 7.0 × 10^?8 mol L^?1 for Cu²⁺ and from 2.0 × 10^?5 to 1.0 × 10^?7 mol L^?1 for Hg²⁺, respectively. The limits of detection (S/N = 3) were 3.0 × 10^?8, 4.0 × 10^?8 and 6.7 × 10^?8 mol L^?1 for Ag⁺, Cu²⁺ and Hg²⁺, respectively. A possible mechanism for the inhibition of CdTe QDs and H₂O₂ CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydrothermal synthesis for high‐quality glutathione‐capped CdxZn1 – xSe and CdxZn1 – xSe/ZnS alloyed quantum dots and its application in Hg(II) sensing

High‐quality Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS core/shell quantum dots (QDs) emitting in the violet–green spectral range have been successfully prepared using hydrothermal methods. The obtained aqueous Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs exhibit a tunable photoluminescence (PL) emission (from 433.5 nm to 501.2 nm) and a favorable narrow photoluminescence bandwidth [full width at half maximum (FWHM): 30–42 nm]. After coating with a ZnS shell, the quantum yield increases from 40.2% to 48.1%. These Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were characterized by transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy and Fourier transform infrared (FTIR) spectroscopy. To further understand the alloying mechanism, the growth kinetics of Cd_xZn_{1 – x}Se were investigated through measuring the fluorescence spectra and X‐ray diffraction spectra at different growth intervals. The results demonstrate that the inverted ZnSe/CdSe core/shell structure is formed initially after the injection of Cd²⁺. With further heating, the core/shell structured ZnSe/CdSe is transformed into alloyed Cd_xZn_{1 – x}Se QDs with the diffusion of Cd²⁺ into ZnSe matrices. With increasing the reaction temperature from 100 °C to 180 °C, the duration time of the alloying process decreases from 210 min to 20 min. In addition, the cytotoxicity of Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were investigated. The results indicate that the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs have low cytotoxicity, which makes them a promising probe for cell imaging. Finally, the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs were utilized to ultrasensitively and selectively detect Hg²⁺ ions with a low detection limit (1.8 nM).     

Determination of naphazoline hydrochloride in biological and pharmaceutical samples by a quantum dot‐assisted chemiluminescence system using response‐surface methodology

A simple and highly sensitive chemiluminescence (CL) method is reported for the determination of naphazoline hydrochloride (NH). It was found that the weak CL from the reaction of luminol and KIO₄ in an alkaline medium could be highly amplified by cysteine‐capped cadmium telluride quantum dots (QDs) and the enhanced CL was effectively quenched by NH and this finding was utilized as a basis for the determination of NH. The QDs were synthesized in aqueous medium and characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and UV‐vis and photoluminescence spectroscopy. A possible mechanism was proposed for the CL system based on radical identification experiments, along with CL spectrum of the system. The experimental parameters were optimized by the reliable response surface methodology (RSM). Under the optimized experimental conditions, the proposed method allowed the determination of NH over the range of 5.0 × 10^‐10–2.0 × 10^‐7 mol/L (r² = 0.9993, n = 10). The precision (RSD%) of the method, obtained from five replicate determinations of 2.0 and 150 nmol/L NH, was found to be 1.0% and 1.3%, respectively. The method was successfully applied to the determination of NH in pharmaceutical formulations and human urine and serum samples with results corroborated with the aid of those obtained from a standard method. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of cadmium selenide quantum dots doped by europium and investigation of their chemiluminescence properties and antibacterial activities

Nanoparticles of cadmium selenide (CdSe) doped with europium, were synthesized as stabilizing agents using thioglycolic acid ligand. This method is based on the enhancing effect of CdSe quantum dots (QDs) doped with europium on chemiluminescence (CL) emission. This emission was generated by mixing CdSe QDs with manganese (II), iron (II) and chrome (II) sulfates as catalysts in the presence of hydrogen peroxide (H₂O₂). The structural characteristics and morphology of these nanoparticles were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, X‐ray pattern and dynamic light scattering methods. The CdSe QDs doped with europium were used as the sensitizer in a luminol?hydrogen peroxide CL system. The sensitized CdSe QDs were analyzed for antibacterial activity against Gram‐positive or Gram‐negative bacteria. The results showed that the CdSe QDs are effective against all the studied bacteria, effectiveness was especially higher for Bacillus subtilis.     

Quantitative study of [Tyr10]nociceptin/orphanin FQ (1-11) at NOP receptors in rat periaqueductal gray and expressed NOP receptors in HEK293 cells

AimThe nociceptin/orphanin FQ (N/OFQ) peptide (NOP) receptor was reported to be functionally heterogeneous. We investigated if [Tyr¹⁰]N/OFQ(1-11), a peptide ligand reported to selectively bind to the high affinity site of ¹²⁵I-[Tyr¹⁴]N/OFQ in rodent brains, can be a tool for revealing the NOP receptor heterogeneity. We have previously founded an NOP receptor subset insensitive to Ro 64-6198 and (+)-5a Compound, two non-peptide NOP agonists, in rat ventrolateral periaqueductal gray (vlPAG) neurons. Here, we examined if [Tyr¹⁰]N/OFQ(1-11) differentiated (+)-5a Compound-sensitive and -insensitive vlPAG neurons. Certain mu-opioid (MOP) receptor ligands highly competing with [Tyr¹⁰]N/OFQ(1-11) in binding studies also showed high affinity at expressed heteromeric NOP–MOP receptors. We also examined if [Tyr¹⁰]N/OFQ(1-11) distinguished heteromeric NOP–MOP receptors from homomeric NOP receptors.Main methodsThe NOP receptor activity was evaluated by G-protein coupled inwardly rectifying potassium (GIRK) currents in rat vlPAG slices, and by inhibition of cAMP accumulation in HEK293 cells expressing NOP receptors or co-expressing NOP and MOP receptors.Key findingsIn vlPAG neurons, [Tyr¹⁰]N/OFQ(1-11), like N/OFQ, induced GIRK currents through NOP receptors. It was less potent (EC₅₀: 8.98 μM) but equi-efficacious as N/OFQ. [Tyr¹⁰]N/OFQ(1-11) displayed different pharmacological profiles as (+)-5a Compound, and was effective in both (+)-5a Compound-sensitive and -insensitive neurons. In NOP-expressing HEK293 cells and NOP- and MOP-co-expressing cells, [Tyr¹⁰]N/OFQ(1-11) displayed similar concentration–response curves in decreasing cAMP accumulation.Significance[Tyr¹⁰]N/OFQ(1-11) is an NOP full agonist and less potent than N/OFQ. However, it can neither reveal the functional heterogeneity of NOP receptors in vlPAG neurons nor differentiate heteromeric NOP–MOP and homomeric NOP receptors.     

The role of calcium-independent phospholipase A2 in cardiolipin remodeling in the spontaneously hypertensive heart failure rat heart

Cardiolipin (CL) is an essential phospholipid component of the inner mitochondrial membrane. In the mammalian heart, the functional form of CL is tetralinoleoyl CL [(18:2)₄CL]. A decrease in (18:2)₄CL content, which is believed to negatively impact mitochondrial energetics, occurs in heart failure (HF) and other mitochondrial diseases. Presumably, (18:2)₄CL is generated by remodeling nascent CL in a series of deacylation-reacylation cycles; however, our overall understanding of CL remodeling is not yet complete. Herein, we present a novel cell culture method for investigating CL remodeling in myocytes isolated from Spontaneously Hypertensive HF rat hearts. Further, we use this method to examine the role of calcium-independent phospholipase A₂ (iPLA₂) in CL remodeling in both HF and nonHF cardiomyocytes. Our results show that 18:2 incorporation into (18:2)₄CL is: a) performed singly with respect to each fatty acyl moiety, b) attenuated in HF relative to nonHF, and c) partially sensitive to iPLA₂ inhibition by bromoenol lactone. These results suggest that CL remodeling occurs in a step-wise manner, that compromised 18:2 incorporation contributes to a reduction in (18:2)₄CL in the failing rat heart, and that mitochondrial iPLA₂ plays a role in the remodeling of CL''s acyl composition.     

SYNTHESIS AND IN VITRO AND IN VIVO EVALUATION OF [11C]METHYL-BIII277CL FOR IMAGING THE PCP-BINDING SITE OF THE NMDA RECEPTOR BY PET

ABSTRACT

A new benzomorphane derivative, [¹¹C]methyl-BIII277CL, was evaluated as a potential radiotracer for visualizing the PCP-binding site of the N-methyl-D-aspartate (NMDA) receptor by positron emission tomography (PET). Methyl-BIII277CL was prepared by reacting the desmethyl compound (BIII277CL) with dimethylsulfate. The pharmacological profile of methyl-BIII277CL was determined by in vitro receptor-screening assays. At a concentration of 100?nM, methyl-BIII277CL showed a significant interaction with the PCP-binding site of the NMDA receptor (79% inhibition of specific binding) and the σ1-binding site (46% inhibition). In displacement assays using mice cortical membranes, methyl-BIII277CL displayed a high affinity at the PCP-binding site of the NMDA receptor (K_i = 49 ± 14?nmol/L) and a 130-fold lower interaction with the σ1-binding site (K_i = 6.35 ± 0.26?µmol/L). For saturation experiments and in vivo studies, methyl-BIII277CL was radiolabeled with ¹¹C at the O-position of the desmethyl precursor (BIII277CL) using [¹¹C]methyliodide with a specific activity of 35–70?GBq/µmol at the end of synthesis (EOS). In saturation assays using rat whole brain membranes [¹¹C]methyl-BIII277CL showed a K_d of 6 ± 1?nmol/L and a B_max of 670 ± 154?fmol/mg protein. Biodistribution and PET studies in rats and pigs, however, indicated a lack of specific binding and unfavorable pharmacokinetics. Kinetic modeling using the 1-tissue compartment model demonstrated for [¹¹C]methyl-BIII277CL a low distribution volume (D_v = 0.98?mL/mL_tissue) and very high values for the kinetic parameters K₁ and k₂ (K₁ = 0.36?mL/mL_tissue/min and k₂ = 0.37?min^?1) in pig cortex. [¹¹C]methyl-BIII277CL, due to the lack of specificity in vivo, may not be a candidate for imaging the PCP-binding site of the NMDA receptor.     

Liquid–liquid extraction of antimicrobial peptide P34 by aqueous two-phase and micellar systems

Antimicrobial peptide P34 is a promising biopreservative for utilization in the food industry. In this work, aqueous biphasic systems (ABS) and aqueous biphasic micellar systems (ABMS) were studied as prestep for purification of peptide P34. The ABS was prepared with polyethylene glycol (PEG) and inorganic salts and the ABMS with Triton X-114 was chosen as the phase-forming surfactant. Results indicate that peptide P34 partitions preferentially to PEG-rich phase and extraction with ammonium sulfate [(NH₄)₂SO₄], yielding a 75% recovery of the antimicrobial activity, specific activity of 1,530 antimicrobial units per mg of protein, and purification fold of 2.48. Protein partition coefficient and partition coefficient for the biological activity with (NH₄)₂SO₄ system were 0.48 and 64, respectively. Addition of sodium chloride did not affect recovery, but decreased protein amount in the PEG-rich phase, indicating a higher partition of biomolecules. ABMS did not yield good recovery of antimicrobial activity. Purification fold using PEG–(NH₄)₂SO₄ and 1.0?mol l^?1 sodium chloride was twice higher than that obtained by conventional protocol, indicating a successful utilization of ABS as a step for purification of peptide P34.     

Enzymatic preparation of streptavidin-immobilized hydrogel using a phenolated linear poly(ethylene glycol)

Hybrid gels constructed from proteins and polymers have attracted a wide range of attention in the field of biomedicine and bioengineering. We report herein the enzymatic preparation of polymer–protein hybrid hydrogels composed of terminally bis-functionalized linear poly(ethylene glycol) (PEG) and streptavidin (SA). PEG was conjugated with tyramine to introduce terminal phenolic hydroxyl (Ph-OH) groups. A peptide tag containing a tyrosine residue (G₄Y-tag) was genetically introduced at the C-terminus of SA. The Ph-OH-modified PEG and G₄Y-tagged SA (SA-G₄Y) were treated by horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H₂O₂) to yield (PEG-Ph-OH)–(SA-G₄Y) hybrid gels. Biotinylated enhanced green fluorescent protein (biotin-EGFP) was selectively captured in the obtained hybrid gels, indicating that SA-G₄Y retained its biological function. The amount of biotin-EGFP immobilized in the hybrid gels depended on the concentration of SA-G₄Y. In addition, biotinylated bacterial alkaline phosphatase (biotin-BAP) was immobilized in the hybrid gel. The immobilized biotin-BAP exhibited more than 95% of the initial activity after 5 rounds of recycling. The results suggest the facile functionalization of the hybrid gel with a variety of biotinylated functional molecules.     

Relationship between conformation and physicochemical properties of polypeptides. I. Synthesis of homo- and co-oligopeptides by the liquid-phase method

The synthesis of the following oligo- and co-oligopeptides by the liquid-phase method is described: (L -Met)₁₅ (I), [L -Glu(OBzl)]₂₀ (II), (L -Val)₈-Gly (IV), (L -Ile)₈-Gly (V), (L -Ile)₄-Gly-(L -Ile)₄ (VI), (L -Ile)₄-Pro-(L -Ile)₄ (VII), (L -Met)₅-L -Pro-(L -Met)₅ (VIII), [L -Glu(OBzl)]₇-L -Pro-[L -Glu(OBzl)]₇ (IX). The oligomers are covalently bound to bifunctional polyethylene glycol (PEG) and monofunctional PEG-M of M_r 5 × 10³?2 × 10⁴. Analytical controls were carried out after each step of synthesis in order to ensure quantitative coupling yields. All products could be obtained in high purity as indicated by amino acid analysis, thin-layer chromatography and chiroptical methods. The solubility of the oligomers was strongly enhanced by the presence of the C-terminal PEG group, enabling conformational investigations in a variety of solvents. A significant relationship between conformation and physicochemical properties of the oligopeptides was observed. Oligomers with tendencies to adopt α-helical (I, II) or unordered structures (VI–IX) showed no pronounced change in solubility or coupling kinetics during chain elongation, whereas the onset of a β-structure (IV, V) was paralleled by a drastic decrease in solubility and reactivity of the terminal amino groups. Most notably, the insertion of a proline or glycine in the middle of a β-forming peptide chain (VI, VII) resulted in a considerable increase in solubility compared to the corresponding homo-oligomers. The impact of the conformational properties of a peptide chain on strategic considerations of peptide synthesis in solution is delineated.     

Evaluation of lophine derivatives as L‐012 (luminol analog)‐dependent chemiluminescence enhancers for measuring horseradish peroxidase and H2O2

8‐Amino‐5‐chloro‐7‐phenylpyrido[3,4‐d]pyridazine‐1,4(2H,3H)dione (L‐012) was recently synthesized as a new chemiluminescence (CL) probe; the light intensity and the sensitivity of L‐012 are higher than those of other CL probes such as luminol. Previously, our group developed four lophine‐based CL enhancers of the horseradish peroxidase (HRP)‐catalyzed CL oxidation of luminol, namely 2‐(4‐hydroxyphenyl)‐4,5‐diphenylimidazole (HDI), 2‐(4‐hydroxyphenyl)‐4,5‐di(2‐pyridyl)imidazole (HPI), 4‐(4,5‐diphenyl‐1H‐imidazol‐2‐yl)phenylboronic acid (DPA), and 4‐[4,5‐di(2‐pyridyl)‐1H‐imidazol‐2‐yl]phenylboronic acid (DPPA), and showed that DPPA was suitable for the photographic detection of HRP. In this study, we replaced luminol with L‐012 and evaluated these as L‐012‐dependent CL enhancers. In addition, to detect HRP and/or H₂O₂ with higher sensitivity, each detection condition for the L‐012–HRP–H₂O₂ enhanced CL was optimized. All the derivatives enhanced the L‐012‐dependent CL as well as luminol CL; HPI generated the highest enhanced luminescence. Under optimized conditions for HRP detection, the detection limit of HRP was 0.08 fmol. By contrast, the detection limit of HRP with the enhanced L‐012‐dependent CL using 4‐iodophenol, which is a common enhancer of luminol CL, was 1.1 fmol. With regard to H₂O₂ detection, the detection limits for enhanced CL with HPI and 4‐iodophenol were 0.29 and 1.5 pmol, respectively. Therefore, it is demonstrated that HPI is the most superior L‐012‐dependent CL enhancer. Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.     

Neuronal uptake of nanoformulated superoxide dismutase and attenuation of angiotensin II-dependent hypertension after central administration

Excessive production of superoxide (O₂⁻) in the central nervous system has been widely implicated in the pathogenesis of cardiovascular diseases, including chronic heart failure and hypertension. In an attempt to overcome the failed therapeutic impact of currently available antioxidants in cardiovascular disease, we developed a nanomedicine-based delivery system for the O₂⁻-scavenging enzyme copper/zinc superoxide dismutase (CuZnSOD), in which CuZnSOD protein is electrostatically bound to a poly-l-lysine (PLL₅₀)–polyethylene glycol (PEG) block copolymer to form a CuZnSOD nanozyme. Various formulations of CuZnSOD nanozyme are covalently stabilized by either reducible or nonreducible crosslinked bonds between the PLL₅₀–PEG polymers. Herein, we tested the hypothesis that PLL₅₀–PEG CuZnSOD nanozyme delivers active CuZnSOD protein to neurons and decreases blood pressure in a mouse model of angiotensin II (AngII)-dependent hypertension. As determined by electron paramagnetic resonance spectroscopy, nanozymes retain full SOD enzymatic activity compared to native CuZnSOD protein. Nonreducible CuZnSOD nanozyme delivers active CuZnSOD protein to central neurons in culture (CATH.a neurons) without inducing significant neuronal toxicity. Furthermore, in vivo studies conducted in adult male C57BL/6 mice demonstrate that hypertension established by chronic subcutaneous infusion of AngII is significantly attenuated for up to 7 days after a single intracerebroventricular injection of nonreducible nanozyme. These data indicate the efficacy of nonreducible PLL₅₀–PEG CuZnSOD nanozyme in counteracting excessive O₂⁻ and decreasing blood pressure in AngII-dependent hypertensive mice after central administration. Additionally, this study supports the further development of PLL₅₀–PEG CuZnSOD nanozyme as an antioxidant-based therapeutic option for hypertension.     

Investigation of the role of hydrophilic chain length in amphiphilic perfluoropolyether/poly(ethylene glycol) networks: towards high-performance antifouling coatings

The facile preparation of amphiphilic network coatings having a hydrophobic dimethacryloxy-functionalized perfluoropolyether (PFPE-DMA; M _w = 1500 g mol^?1) crosslinked with hydrophilic monomethacryloxy functionalized poly(ethylene glycol) macromonomers (PEG-MA; M _w = 300, 475, 1100 g mol^?1), intended as non-toxic high-performance marine coatings exhibiting antifouling characteristics is demonstrated. The PFPE-DMA was found to be miscible with the PEG-MA. Photo-cured blends of these materials containing 10 wt% of PEG-MA oligomers did not swell significantly in water. PFPE-DMA crosslinked with the highest molecular weight PEG oligomer (ie PEG1100) deterred settlement (attachment) of algal cells and cypris larvae of barnacles compared to a PFPE control coating. Dynamic mechanical analysis of these networks revealed a flexible material. Preferential segregation of the PEG segments at the polymer/air interface resulted in enhanced antifouling performance. The cured amphiphilic PFPE/PEG films showed decreased advancing and receding contact angles with increasing PEG chain length. In particular, the PFPE/PEG1100 network had a much lower advancing contact angle than static contact angle, suggesting that the PEG1100 segments diffuse to the polymer/water interface quickly. The preferential interfacial aggregation of the larger PEG segments enables the coating surface to have a substantially enhanced resistance to settlement of spores of the green seaweed Ulva, cells of the diatom Navicula and cypris larvae of the barnacle Balanus amphitrite as well as low adhesion of sporelings (young plants) of Ulva, adhesion being lower than to a polydimethyl elastomer, Silastic T2.