Hydrophobic forces drive spontaneous membrane insertion of the bacteriophage Pf3 coat protein without topological control

Bacterial integral inner membrane proteins are either translocated across the lipid bilayer using an energy-driven enzyme, such as the Sec translocase, or they might interact directly with the membrane due to hydrophobic forces. We report that the single-spanning Pf3 coat protein is spontaneously inserted into the membrane of Escherichia coli and requires the electrical component of the membrane potential (DeltaPsi) to translocate its N-terminal region. This results in a final N(out)C(in) orientation of the protein in the cytoplasmic membrane, due the potential-driven translocation of the aspartyl residue at position 18 in the hydrophilic N-terminal tail. Uncharged protein tails are only translocated when the hydrophobic transmembrane region of the protein has been extended. An extended transmembrane anchor allows membrane insertion in the absence of an electrochemical membrane potential, but also causes the loss of a strict determination of the topology.     

The translocation of negatively charged residues across the membrane is driven by the electrochemical potential: evidence for an electrophoresis-like membrane transfer mechanism.

The role of the membrane electrochemical potential in the translocation of acidic and basic residues across the membrane was investigated with the M13 procoat protein, which has a short periplasmic loop, and leader peptidase, which has an extended periplasmically located N-terminal tail. For both proteins we find that the membrane potential promotes membrane transfer only when negatively charged residues are present within the translocated domain. When these residues are substituted by uncharged amino acids, the proteins insert into the membrane independently of the potential. In contrast, when a positively charged residue is present within the N-terminal tail of leader peptidase, the potential impedes translocation of the tail domain. However, an impediment was not observed in the case of the procoat protein, where positively charged residues in the central loop are translocated even in the presence of the membrane potential. Intriguingly, several of the negatively charged procoat proteins required the SecA and SecY proteins for optimal translocation. The studies reported here provide insights into the role of the potential in membrane protein assembly and suggest that electrophoresis can play an important role in controlling membrane topology.     

Competition between neighboring topogenic signals during membrane protein insertion into the ER

To better define the mechanism of membrane protein insertion into the membrane of the endoplasmic reticulum, we measured the kinetics of translocation across microsomal membranes of the N-terminal lumenal tail and the lumenal domain following the second transmembrane segment (TM2) in the multispanning mouse protein Cig30. In the wild-type protein, the N-terminal tail translocates across the membrane before the downstream lumenal domain. Addition of positively charged residues to the N-terminal tail dramatically slows down its translocation and allows the downstream lumenal domain to translocate at the same time as or even before the N-tail. When TM2 is deleted, or when the loop between TM1 and TM2 is lengthened, addition of positively charged residues to the N-terminal tail causes TM1 to adopt an orientation with its N-terminal end in the cytoplasm. We suggest that the topology of the TM1-TM2 region of Cig30 depends on a competition between TM1 and TM2 such that the transmembrane segment that inserts first into the ER membrane determines the final topology.     

Membrane biogenesis of subunit II of cytochrome bo oxidase: contrasting requirements for insertion of N-terminal and C-terminal domains

The membrane assembly of the respiratory complexes requires the membrane insertases Oxa1 in mitochondria and YidC in bacteria. Oxa1 is responsible for the insertion of the mitochondrial cytochrome c oxidase subunit II (CoxII). Here, we investigated whether YidC, the bacterial Oxa1 homolog, plays a crucial role in the assembly of the bacterial subunit II (CyoA) of cytochrome bo oxidase. CyoA spans the membrane twice and is made with a cleavable signal peptide. We find that translocation of the short N-terminal domain of CyoA is YidC-dependent. In contrast, both the SecA/SecYEG complex and YidC are required for translocation of the large C-terminal domain. By studying the N-terminal domain of CyoA alone, we find that translocation is unaffected when SecE is depleted, suggesting that the YidC insertase on its own catalyzes membrane insertion of the N-terminal region of CyoA. Strikingly, we find that the translocation of the N-terminal domain is a prerequisite for translocation of the C-terminal domain in the full-length CyoA protein because translocation of the large C-terminal domain alone in a truncated CyoA derivative was observed in the absence of YidC. This work shows that the distinct domains of CyoA have different translocation requirements (YidC only and Sec/YidC) and confirms that the membrane biogenesis of subunit II of cytochrome oxidase in bacteria and mitochondria have conserved features.     

Distinct domains of an oligotopic membrane protein are Sec-dependent and Sec-independent for membrane insertion.

Leader peptidase of Escherichia coli spans the plasma membrane twice with its amino terminus on the periplasmic surface of the membrane and its large carboxyl-terminal domain protruding into the periplasm. To monitor the transfer of the amino terminus of leader peptidase to the periplasm, we have constructed a fusion protein between the 18-residue amino-terminal periplasmic domain of Pf3 bacteriophage coat protein and the beginning of leader peptidase. We find that neither the SecA or SecY proteins nor a transmembrane electrochemical potential is required for insertion of the amino terminus, while the transfer of the carboxyl-terminal domain of leader peptidase has these requirements. The first 35 residues of leader peptidase, which include the first hydrophobic domain and the carboxyl-terminal positively charged cluster, are sufficient to insert the amino terminus. When positively charged residues are introduced before the first transmembrane segment, translocation of the amino terminus is abolished. These studies in protein membrane topogenesis, showing that there are different requirements for amino and carboxyl termini insertion, indicate that multiple mechanisms exist even within the same protein.     

Chloroplast YidC homolog Albino3 can functionally complement the bacterial YidC depletion strain and promote membrane insertion of both bacterial and chloroplast thylakoid proteins

A new component of the bacterial translocation machinery, YidC, has been identified that specializes in the integration of membrane proteins. YidC is homologous to the mitochondrial Oxa1p and the chloroplast Alb3, which functions in a novel pathway for the insertion of membrane proteins from the mitochondrial matrix and chloroplast stroma, respectively. We find that Alb3 can functionally complement the Escherichia coli YidC depletion strain and promote the membrane insertion of the M13 procoat and leader peptidase that were previously shown to depend on the bacterial YidC for membrane translocation. In addition, the chloroplast Alb3 that is expressed in bacteria is essential for the insertion of chloroplast cpSecE protein into the bacterial inner membrane. Surprisingly, Alb3 is not required for the insertion of cpSecE into the thylakoid membrane. These results underscore the importance of Oxa1p homologs for membrane protein insertion in bacteria and demonstrate that the requirement for Oxa1p homologs is different in the bacterial and thylakoid membrane systems.     

Directionality in protein translocation across membranes: the N-tail phenomenon

Protein translocation normally starts from an N-terminal signal peptide and proceeds in an N-to-C-terminal direction. However, in certain integral membrane proteins an N-terminal tail is translocated even though it is not preceded by a signal peptide. In eukaryotic cells this process involves the normal Sec-machinery. In contrast, recent studies in Escherichia coli show that translocation of such N-terminal tails occurs by a mechanism that does not appear to involve the Sec proteins and is most efficient for short tails lacking positively charged residues. These novel observations suggest that the Sec-machinery has an inherent N-to-C-terminal directionality and cannot work 'in reverse'.     

Insertion of the mannitol permease into the membrane of Escherichia coli. Possible involvement of an N-terminal amphiphilic sequence

The in vivo membrane assembly of the mannitol permease, the mannitol Enzyme II (IImtl) of the Escherichia coli phosphotransferase system, has been studied employing molecular genetic approaches. Removal of the N-terminal amphiphilic leader of the permease and replacement with a short hydrophobic sequence resulted in an inactive protein unable to transport mannitol into the cell or catalyze either phosphoenol-pyruvate-dependent or mannitol 1-phosphate-dependent mannitol phosphorylation in vitro. The altered protein (68 kDa) was quantitatively cleaved by an endogenous protease to a membrane-associated 39-kDa fragment and a soluble 28-kDa fragment as revealed by Western blot analyses. Overproduction of the wild-type plasmid-encoded protein also led to cleavage, but repression of the synthesis of the plasmid-encoded enzyme by inclusion of glucose in the growth medium prevented cleavage. Several mtlA-phoA gene fusions encoding fused proteins with N-terminal regions derived from the mannitol permease and C-terminal regions derived from the mature portion of alkaline phosphatase were constructed. In the first fusion protein, F13, the N-terminal 13-aminoacyl residue amphiphilic leader sequence of the mannitol permease replaced the hydrophobic leader sequence of alkaline phosphatase. The resultant fusion protein was inefficiently translocated across the cytoplasmic membrane and became peripherally associated with both the inner and outer membranes, presumably via the noncleavable N-terminal amphiphilic sequence. The second fusion protein, F53, in which the N-terminal 53 residues of the mannitol permease were fused to alkaline phosphatase, was efficiently translocated across the cytoplasmic membrane and was largely found anchored to the inner membrane with the catalytic domain of alkaline phosphatase facing the periplasm. This 53-aminoacyl residue sequence included the amphiphilic leader sequence and a single hydrophobic, potentially transmembrane, segment. Analyses of other MtlA-PhoA fusion proteins led to the suggestion that internal amphiphilic segments may function to facilitate initiation of polypeptide trans-membrane translocation. The dependence of IImtl insertion on the N-terminal amphiphilic leader sequence was substantiated employing site-specific mutagenesis. The N-terminal sequence of the native permease is Met-Ser-Ser-Asp-Ile-Lys-Ile-Lys-Val-Gln-Ser-Phe-Gly.... The following point mutants were isolated, sequenced, and examined regarding the effects of the mutations on insertion of IImtl into the membrane: 1) S3P; 2) D4P; 3) D4L; 4) D4R; 5) D4H; 6) I5N; 7) K6P; and 8) K8P.(ABSTRACT TRUNCATED AT 400 WORDS)     

Membrane insertion kinetics of a protein domain in vivo. The bacterioopsin n terminus inserts co-translationally.

The pathway by which segments of a polytopic membrane protein are inserted into the membrane has not been resolved in vivo. We have developed an in vivo kinetic assay to examine the insertion pathway of the polytopic protein bacterioopsin, the apoprotein of Halobacterium salinarum bacteriorhodopsin. Strains were constructed that express the bacteriorhodopsin mutants I4C:H(6) and T5C:H(6), which carry a unique Cys in the N-terminal extracellular domain and a polyhistidine tag at the C terminus. Translocation of the N-terminal domain was detected using a membrane-impermeant gel shift reagent to derivatize the Cys residue of nascent radiolabeled molecules. Derivatization was assessed by gel electrophoresis of the fully elongated radiolabeled population. The time required to translocate and fully derivatize the Cys residues of I4C:H(6) and T5C:H(6) is 46 +/- 9 and 61 +/- 6 s, respectively. This is significantly shorter than the elongation times of the proteins, which are 114 +/- 26 and 169 +/- 16 s, respectively. These results establish that translocation of the bacterioopsin N terminus and insertion of the first transmembrane segment occur co-translationally and confirm the use of the assay to monitor the kinetics of polytopic membrane protein insertion in vivo.     

Arginine 357 of SecY is needed for SecA-dependent initiation of preprotein translocation

The Escherichia coli SecYEG complex forms a transmembrane channel for both protein export and membrane protein insertion. Secretory proteins and large periplasmic domains of membrane proteins require for translocation in addition the SecA ATPase. The conserved arginine 357 of SecY is essential for a yet unidentified step in the SecA catalytic cycle. To further dissect its role, we have analysed the requirement for R357 in membrane protein insertion. Although R357 substitutions abolish post-translational translocation, they allow the translocation of periplasmic domains targeted co-translationally by an N-terminal transmembrane segment. We propose that R357 is essential for the initiation of SecA-dependent translocation only.     

In vitro insertion of leader peptidase into Escherichia coli membrane vesicles.

Leader peptidase is an integral protein of the Escherichia coli cytoplasmic membrane whose topology is known. We have taken advantage of this knowledge and available mutants of this enzyme to develop a genetic test for a cell-free protein translocation reaction. We report that leader peptidase inserted into inverted plasma membrane vesicles in its correct transmembrane orientation. We have examined the in vitro membrane assembly characteristics of a variety of leader peptidase mutants and found that domains required for insertion in vivo are also necessary for insertion in vitro. These data demonstrate the physiological validity of the in vitro insertion reaction and strengthen the use of this in vitro protein translocation reaction for the dissection of this complex sorting pathway.     

Novel GFP expression using a short N-terminal polypeptide through the defined twin-arginine translocation (Tat) pathway

Escherichia coli is frequently used as a convenient host organism for soluble recombinant protein expression. However, additional strategies are needed for proteins with complex folding characteristics. Here, we suggested that the acidic, neutral, and alkaline isoelectric point (pI) range curves correspond to the channels of the E. coli type-II cytoplasmic membrane translocation (periplasmic translocation) pathways of twin-arginine translocation (Tat), Yid, and general secretory pathway (Sec), respectively, for unfolded and folded target proteins by examining the characteristic pI values of the N-termini of the signal sequences or the leader sequences, matching with the known diameter of the translocation channels, and analyzing the N-terminal pI value of the signal sequences of the Tat substrates. To confirm these proposed translocation pathways, we investigated the soluble expression of the folded green fluorescent protein (GFP) with short N-terminal polypeptides exhibiting pI and hydrophilicity separately or collectively. This, in turn, revealed the existence of an anchor function with a specific directionality based on the N-terminal pI value (termed as N-terminal pI-specific directionality) and distinguished the presence of the E. coli type-II cytoplasmic membrane translocation pathways of Tat, Yid, and Sec for the unfolded and folded target proteins. We concluded that the pI value and hydrophilicity of the short N-terminal polypeptide, and the total translational efficiency of the target proteins based on the ΔGRNA value of the N-terminal coding regions are important factors for promoting more efficient translocation (secretion) through the largest diameter of the Tat channel. These results show that the short N-terminal polypeptide could substitute for the Tat signal sequence with improved efficiency.     

Polarity and Charge of the Periplasmic Loop Determine the YidC and Sec Translocase Requirement for the M13 Procoat Lep Protein

During membrane biogenesis, the M13 procoat protein is inserted into the lipid bilayer in a strictly YidC-dependent manner with both the hydrophobic signal sequence and the membrane anchor sequence promoting translocation of the periplasmic loop via a hairpin mechanism. Here, we find that the translocase requirements can be altered for PClep in a predictable manner by changing the polarity and charge of the peptide region that is translocated across the membrane. When the polarity of the translocated peptide region is lowered and the charged residues in this region are removed, translocation of this loop region occurs largely by a YidC- and Sec-independent mechanism. When the polarity is increased to that of the wild-type procoat protein, the YidC insertase is essential for translocation. Further increasing the polarity, by adding charged residues, switches the insertion pathway to a YidC/Sec mechanism. Conversely, we find that increasing the hydrophobicity of the transmembrane segments of PClep can decrease the translocase requirement for translocation of the peptide chain. This study provides a framework to understand why the YidC and Sec machineries exist in parallel and demonstrates that the YidC insertase has a limited capacity to translocate a peptide chain on its own.     

Translocation can drive the unfolding of a preprotein domain.

Precursor proteins are believed to have secondary and tertiary structure prior to translocation across the Escherichia coli plasma membrane. We now find that preprotein unfolding during translocation can be driven by the translocation event itself. At certain stages, translocation and unfolding can occur without exogenous energy input. To examine this unfolding reaction, we have prepared proOmpA-Dhfr, a fusion protein of the well studied cytosolic enzyme dihydrofolate reductase (Dhfr) connected to the C-terminus of proOmpA, the precursor form of outer membrane protein A. At an intermediate stage of its in vitro translocation, the N-terminal proOmpA domain has crossed the membrane while the folded Dhfr portion, stabilized by its ligands NADPH and methotrexate, has not. When the ligands are removed from this intermediate, translocation occurs by a two-step process. First, 20-30 amino acid residues of the fusion protein translocate concomitant with unfolding of the Dhfr domain. This reaction requires neither ATP, delta mu H+ nor the SecA subunit of translocase. Strikingly, this translocation accelerates the net unfolding of the Dhfr domain. In a second step, SecA and ATP hydrolysis drive the rapid completion of translocation. Thus energy derived from translocation can drive the unfolding of a substantial protein domain.     

Use of site-directed mutagenesis to define the limits of sequence variation tolerated for processing of the M13 procoat protein by the Escherichia coli leader peptidase.

Leader peptidase cleaves the leader sequence from the amino terminus of newly made membrane and secreted proteins after they have translocated across the membrane. Analysis of a large number of leader sequences has shown that there is a characteristic pattern of small apolar residues at -1 and -3 (with respect to the cleavage site) and a helix-breaking residue adjacent to the central apolar core in the region -4 to -6. The conserved sequence pattern of small amino acids at -1 and -3 around the cleavage site most likely represents the substrate specificity of leader peptidase. We have tested this by generating 60 different mutations in the +1 to -6 domain of the M13 procoat protein. These mutants were analyzed for in vivo and in vitro processing, as well as for protein insertion into the cytoplasmic membrane. We find that in vivo leader peptidase was able to process procoat with an alanine, a serine, a glycine, or a proline residue at -1 and with a serine, a glycine, a threonine, a valine, or a leucine residue at -3. All other alterations at these sites were not processed, in accordance with predictions based on the conserved features of leader peptides. Except for proline and threonine at +1, all other residues at this position were processed by leader peptidase. None of the mutations at -2, -4, or -5 of procoat (apart from proline at -4) completely abolished leader peptidase cleavage in vivo although there were large effects on the kinetics of processing.(ABSTRACT TRUNCATED AT 250 WORDS)     

Histone H2A C-terminus regulates chromatin dynamics, remodeling, and histone H1 binding

The tails of histone proteins are central players for all chromatin-mediated processes. Whereas the N-terminal histone tails have been studied extensively, little is known about the function of the H2A C-terminus. Here, we show that the H2A C-terminal tail plays a pivotal role in regulating chromatin structure and dynamics. We find that cells expressing C-terminally truncated H2A show increased stress sensitivity. Moreover, both the complete and the partial deletion of the tail result in increased histone exchange kinetics and nucleosome mobility in vivo and in vitro. Importantly, our experiments reveal that the H2A C-terminus is required for efficient nucleosome translocation by ISWI-type chromatin remodelers and acts as a novel recognition module for linker histone H1. Thus, we suggest that the H2A C-terminal tail has a bipartite function: stabilisation of the nucleosomal core particle, as well as mediation of the protein interactions that control chromatin dynamics and conformation.     

Sec-independent translocation of a 100-residue periplasmic N-terminal tail in the E. coli inner membrane protein proW.

The ProW protein, located in the inner membrane of Escherichia coli, has a very unusual topology with a 100-residue-long N-terminal tail protruding into the periplasmic space. We have studied the mechanism of membrane translocation of the periplasmic tail by analysing ProW-PhoA and ProW-Lep fusion proteins, both in wild-type cells and in cells with an impaired sec machinery. Our results show that the translocation efficiency is not affected by treatments that compromise the SecA and SecY functions, but that translocation is completely blocked by dissipation of the proton motive force or by the introduction of extra positively charged residues into the N-terminal tail. This suggests that the sec machinery can act properly only on domains located on the C-terminal side of a translocation signal, and that the N-terminal tail is driven through the membrane by a mechanism that involves the proton motive force.     

Conditional lethal mutations separate the M13 procoat and Pf3 coat functions of YidC: different YIDC structural requirements for membrane protein insertion

Conditional lethal YidC mutants have been isolated to decipher the role of YidC in the assembly of Sec-dependent and Sec-independent membrane proteins. We now show that the membrane insertion of the Sec-independent M13 procoat-lep protein is inhibited in a short time in a temperature-sensitive mutant when shifted to the nonpermissive temperature. This provides an additional line of evidence that YidC plays a direct role in the insertion of the Sec-independent M13 procoat protein. However, in the temperature-sensitive mutant, the insertion of the Sec-independent Pf3 phage coat protein and the Sec-dependent leader peptidase were not strongly inhibited at the restricted temperatures. Conversely, using a cold-sensitive YidC strain, we find that the membrane insertion of the Sec-independent Pf3 coat protein is blocked, and the Sec-dependent leader peptidase is inhibited at the nonpermissive temperature, whereas the insertion of the M13 procoat protein is nearly normal. These data show that the YidC function for procoat and its function for Pf3 coat and possibly leader peptidase are genetically separable and suggest that the YidC structural requirements are different for the Sec-independent M13 procoat and Pf3 coat phage proteins that insert by different mechanisms.     

Export and localization of N-terminally truncated derivatives of Escherichia coli K-12 outer membrane protein PhoE

To identify export and sorting information in outer membrane protein PhoE of Escherichia coli K-12, a set of deletions was created, resulting in the removal of N-terminal amino acids of the mature protein. Pulse-chase experiments revealed that some mutant proteins were slowly or not at all processed, but there was not correlation between processing rate and the extent of the deletions. The unprocessed precursors were accessible to trypsin in the periplasm showing that processing by leader peptidase rather than translocation is affected by these deletions. The results show that no specific sequences in the N-terminal part of the mature PhoE protein are required for translocation through the inner membrane. The capability of the processed mutant proteins to assemble into the outer membrane was correlated to the exten of the deletions. Thus, mutants which lack up to amino acid residue 14 are normally incorporated into the outer membrane. Larger deletions which removed the first postulated membrane-spanning fragment of the protein affected the efficiency of assembly: in addition to trimers of the protein in the outer membrane, also monomers were detected in the periplasm. If the deletions extended C-terminally to residue 48, only monomeric forms of the proteins were found in the periplasm.