Cellulase Complex of the Fungus Chrysosporium lucknowense: Isolation and Characterization of Endoglucanases and Cellobiohydrolases

Using different chromatographic techniques, eight cellulolytic enzymes were isolated from the culture broth of a mutant strain of Chrysosporium lucknowense: six endoglucanases (EG: 25 kD, pI 4.0; 28 kD, pI 5.7; 44 kD, pI 6.0; 47 kD, pI 5.7; 51 kD, pI 4.8; 60 kD, pI 3.7) and two cellobiohydrolases (CBH I, 65 kD, pI 4.5; CBH II, 42 kD, pI 4.2). Some of the isolated cellulases were classified into known families of glycoside hydrolases: Cel6A (CBH II), Cel7A (CBH I), Cel12A (EG28), Cel45A (EG25). It was shown that EG44 and EG51 are two different forms of one enzyme. EG44 seems to be a catalytic module of an intact EG51 without a cellulose-binding module. All the enzymes had pH optimum of activity in the acidic range (at pH 4.5-6.0), whereas EG25 and EG47 retained 55-60% of the maximum activity at pH 8.5. Substrate specificity of the purified cellulases against carboxymethylcellulose (CMC), beta-glucan, Avicel, xylan, xyloglucan, laminarin, and p-nitrophenyl-beta-D-cellobioside was studied. EG44 and EG51 were characterized by the highest CMCase activity (59 and 52 U/mg protein). EG28 had the lowest CMCase activity (11 U/mg) amongst the endoglucanases; however, this enzyme displayed the highest activity against beta-glucan (125 U/mg). Only EG51 and CBH I were characterized by high adsorption ability on Avicel cellulose (98-99%). Kinetics of Avicel hydrolysis by the isolated cellulases in the presence of purified beta-glucosidase from Aspergillus japonicus was studied. The hydrolytic efficiency of cellulases (estimated as glucose yield after a 7-day reaction) decreased in the following order: CBH I, EG60, CBH II, EG51, EG47, EG25, EG28, EG44.     

Inhibition of enzymatic hydrolysis by residual lignins from softwood--study of enzyme binding and inactivation on lignin-rich surface

Lignin-derived inhibition is a major obstacle restricting the enzymatic hydrolysis of cell wall polysaccharides especially with softwood lignocellulosics. Enzyme adsorption on lignin is suggested to contribute to the inhibitory effect of lignin. The interaction of cellulases with softwood lignin was studied in the present work with commercial Trichoderma reesei cellulases (Celluclast) and lignin-rich residues isolated from steam pretreated softwood (SPS) by enzymatic and acid hydrolysis. Both lignin preparations inhibited the hydrolysis of microcrystalline cellulose (Avicel) and adsorbed the major cellulases present in the commercial cellulase mixture. The adsorption phenomenon was studied at low temperature (4°C) and at the typical hydrolysis temperature (45°C) by following activities of free and lignin-bound enzymes. Severe inactivation of the lignin-bound enzymes was observed at 45°C, however at 4°C the enzymes retained well their activity. Furthermore, SDS-PAGE analysis of the lignin-bound enzymes indicated that very strong interactions form between the residue and the enzymes at 45°C, because the enzymes were not released from the residue in the electrophoresis. These results suggest that heat-induced denaturation may take place on the surface of softwood lignin at the hydrolysis temperature.     

Cellulases of Penicillium verruculosum

Nine major cellulolytic enzymes were isolated from a culture broth of a mutant strain of the fungus Penicillium verruculosum: five endo-1, 4-β-glucanases (EGs) having molecular masses 25, 33, 39, 52, and 70 kDa, and four cellobiohydrolases (CBHs: 50, 55, 60, and 66 kDa). Based on amino acid similarities of short sequenced fragments and peptide mass fingerprinting, the isolated enzymes were preliminary classified into different families of glycoside hydrolases: Cel5A (EG IIa, 39 kDa), Cel5B (EG IIb, 33 kDa), Cel6A (CBH II, two forms: 50 and 60 kDa), Cel7A (CBH I: 55 and 66 kDa), Cel7B (EG I: 52 and 70 kDa). The 25 kDa enzyme was identical to the previously isolated Cel12A (EG III). The family assignment was further confirmed by the studies of the substrate specificity of the purified enzymes. High-molecular-weight forms of the Cel6A, Cel7A, and Cel7B were found to possess a cellulose-binding module (CBM), while the catalytically active low-molecular-weight forms of the enzymes, as well as other cellulases, lacked the CBM. Properties of the isolated enzymes, such as substrate specificity toward different polysaccharides and synthetic glycosides, effect of pH and temperature on the enzyme activity and stability, adsorption on Avicel cellulose and kinetics of its hydrolysis, were investigated.     

Binding characteristics of Trichoderma reesei cellulases on untreated, ammonia fiber expansion (AFEX), and dilute-acid pretreated lignocellulosic biomass

Studying the binding properties of cellulases to lignocellulosic substrates is critical to achieving a fundamental understanding of plant cell wall saccharification. Lignin auto-fluorescence and degradation products formed during pretreatment impede accurate quantification of individual glycosyl hydrolases (GH) binding to pretreated cell walls. A high-throughput fast protein liquid chromatography (HT-FPLC)-based method has been developed to quantify cellobiohydrolase I (CBH I or Cel7A), cellobiohydrolase II (CBH II or Cel6A), and endoglucanase I (EG I or Cel7B) present in hydrolyzates of untreated, ammonia fiber expansion (AFEX), and dilute-acid pretreated corn stover (CS). This method can accurately quantify individual enzymes present in complex binary and ternary protein mixtures without interference from plant cell wall-derived components. The binding isotherms for CBH I, CBH II, and EG I were obtained after incubation for 2 h at 4 °C. Both AFEX and dilute acid pretreatment resulted in increased cellulase binding compared with untreated CS. Cooperative binding of CBH I and/or CBH II in the presence of EG I was observed only for AFEX treated CS. Competitive binding between enzymes was found for certain other enzyme-substrate combinations over the protein loading range tested (i.e., 25-450 mg/g glucan). Langmuir single-site adsorption model was fitted to the binding isotherm data to estimate total available binding sites E(bm) (mg/g glucan) and association constant K(a) (L/mg). Our results clearly demonstrate that the characteristics of cellulase binding depend not only on the enzyme GH family but also on the type of pretreatment method employed.     

Identification and purification of the main components of cellulases from a mutant strain of Trichoderma viride T 100-14

A new mutant strain of fungus Trichoderma viride T 100-14 was cultivated on 1% microcrystalline cellulose (Avicel) for 120h and the resulting culture filtrate was prepared for protein identification and purification. To identify the predominant catalytic components, cellulases were separated by an adapted two-dimensional electrophoresis technique. The apparent major spots were identified by high performance liquid chromatography electrospray ionization mass (HPLC-ESI-MS). Seven of the components were previously known, i.e., the endoglucanases Cel7B (EG I), Cel12A (EG III), Cel61A (EG IV), the cellobiohydrolases Cel7A (CBH I), Cel6A (CBH II), Cel6B (CBH IIb) and the beta-glucosidase. The seven major components in the fermentation broth of T. viride T 100-14 probably constitute the essential enzymes for crystalline cellulose hydrolysis and they were further purified to electrophoretic homogeneity by a series of chromatography column. Hydrolysis studies of the purified elements revealed that three of the cellulases were classified as cellobiohydrolases due to their main activities on p-nitrophenyl-beta-d-cellobioside (pNPC). Three of the cellulases, with the abilities of hydrolyzing both carboxymethyl-cellulose (CMC) and Avicel indicate their endoglucanase activities. It deserved noting that the beta-glucosidase from the T 100-14 displayed an extremely high activity on p-nitrophenyl-beta-D-glycopyranoside (pNPG), which suggested it was a good candidate for the conversion of cellobiose to glucose.     

The conserved terminal region of Trichoderma reesei cellulases forms a strong antigenic epitope for polyclonal antibodies.

The specificity of polyclonal antibodies (Pab) raised against Trichoderma reesei cellulases has been studied. cDNAs lacking regions coding for certain functional domains were produced by preparing series of 3'-end deletions from the cDNAs for two cellobiohydrolases, CBH I and CBH II, and an endoglucanase, EG I. The proteins coded by the full length cDNAs and the truncated proteins coded by the deleted cDNAs were expressed in yeast Saccharomyces cerevisiae, under the control of the ADC1 promoter. Each polyclonal antiserum showed cross-reactivity with other cellulases. Pabs for CBH I and CBH II both recognized EG I. Pab for EG I strongly recognized both CBH I and CBH II. By analyzing the truncated proteins, we found that these antibodies were almost entirely directed against the conserved tail of the cellulase enzymes.     

The 1,4-beta-D-glucan glucanohydrolases from Phanerochaete chrysosporium. Re-assessment of their significance in cellulose degradation mechanisms.

A physico-chemical, functional and structural characterization, including partial sequence data, of three major 1,4-beta-D-glucan glucanohydrolases (EC. 3.2.1.4) isolated from the culture filtrate of the white-rot fungus Phanerochaete chrysosporium, shows that all three enzymes belong to a single family of cellulases. EG44, pI 4.3, (named after its apparent molecular mass in kDa), shows a clear homology with Schizopyllum commune Endoglucanase I (EGI); whereas EG38, pI 4.9, (named in the same manner) is related more closely to Trichoderma reesei (Trichoderma longibrachiatum) Endoglucanase III (EGIII). EG36, pI 5.6-5.7, is probably an EG38 protein lacking its cellulose binding domain. Strong synergistic action is induced by the enzymes acting in concert with cellobiohydrolases (CBHI and CBHII) from the same organism, indicating a highly effective enzymatic system for cellulose degradation. Controlled proteolysis with papain has allowed a so far unique cleavage of endoglucanases EG44 and EG38 into two domains: a core protein, which virtually lacks the capacity to absorb onto microcrystal-line cellulose but retains full catalytic activity against carboxymethyl cellulose and low molecular weight soluble substrates; and a peptide fragment corresponding to the cellulose binding domain. The latter appears to be of paramount significance in the mechanisms involved in the hydrolysis of microcrystalline cellulose.     

Hydrolysis of microcrystalline cellulose by cellobiohydrolase I and endoglucanase II from Trichoderma reesei: adsorption, sugar production pattern, and synergism of the enzymes

Microcrystalline cellulose (10 g/L Avicel) was hydrolysed by two major cellulases, cellobiohydrolase I (CBH I) and endoglucanase II (EG II), of Trichoderma reesei. Two types of experiments were performed, and in both cases the enzymes were added alone and together, in equimolar mixtures. In time course studies the reaction time was varied between 3 min and 48 h at constant temperature (40 degrees C) and enzyme loading (0.16 micromol/g Avicel). In isotherm studies the enzyme loading was varied in the range of 0.08-2.56 micromol/g at 4 degrees C and 90 min. Adsorption of the enzymes and production of soluble sugars were followed by FPLC and HPLC, respectively. Adsorption started quickly (50% of maximum achieved after 3 min) but was not completed before 60-90 min. For CBH I a linear relationship was observed between the production of soluble sugars and adsorption, showing that the average activity of the bound CBH I molecules does not change with increasing saturation. For EG II the corresponding curve levelled off which is explained by initial hydrolysis of loose ends on Avicel. The enzymes competed for binding sites, binding of EG II was considerably affected by CBH I, especially at high concentration. CBH I produced more soluble sugars than EG II, except at conversions below 1%. At 40 degrees C when the enzymes were added together they produced 27-45% more soluble sugars than the sum of what they produced alone, i.e. synergistic action was observed (the final conversion after 48 h of hydrolysis was 3, 6, and 13% for EG II, CBH I, and their mixture, respectively). At 4 degrees C, on the other hand, when the conversion was below 2.5%, almost no synergism could be observed. Molar proportions of the produced sugars were rather stable for CBH I (11-15%, 82-89%, and <6% for glucose, cellobiose, and cellotriose, respectively), while it varied considerably with both time and enzyme concentration for EG II. The observed stable but high glucose to cellobiose ratio for CBH I indicates that the processivity for this enzyme is not perfect. EG II produced significant amounts of glucose, cellobiose, and cellotriose, which are not the expected products of a typical endoglucanase activity on a solid substrate. We explain this by hypothesizing that EG II may show processivity due to its extended substrate binding site and the presence of its cellulose binding domain.     

Design of highly efficient cellulase mixtures for enzymatic hydrolysis of cellulose

An extremely highly active cellobiohydrolase (CBH IIb or Cel6B) was isolated from Chrysosporium lucknowense UV18-25 culture filtrate. The CBH IIb demonstrated the highest ability for a deep degradation of crystalline cellulose amongst a few cellobiohydrolases tested, including C. lucknowense CBH Ia, Ib, IIa, and Trichoderma reesei CBH I and II. Using purified C. lucknowense enzymes (CBH Ia, Ib, and IIb; endoglucanases II and V; beta-glucosidase, xylanase II), artificial multienzyme mixtures were reconstituted, displaying an extremely high performance in a conversion of different cellulosic substrates (Avicel, cotton, pretreated Douglas fir wood) to glucose. These mixtures were much or notably more effective in hydrolysis of the cellulosic substrates than the crude multienzyme C. lucknowense preparation and other crude cellulase samples produced by T. reesei and Penicillium verruculosum. Highly active cellulases are a key factor in bioconversion of plant lignocellulosic biomass to ethanol as an alternative to fossil fuels.     

Mechanisms of laccase-mediator treatments improving the enzymatic hydrolysis of pre-treated spruce

Background

The recalcitrance of softwood to enzymatic hydrolysis is one of the major bottlenecks hindering its profitable use as a raw material for platform sugars. In softwood, the guaiacyl-type lignin is especially problematic, since it is known to bind hydrolytic enzymes non-specifically, rendering them inactive towards cellulose. One approach to improve hydrolysis yields is the modification of lignin and of cellulose structures by laccase-mediator treatments (LMTs).

Results

LMTs were studied to improve the hydrolysis of steam pre-treated spruce (SPS). Three mediators with three distinct reaction mechanisms (ABTS, HBT, and TEMPO) and one natural mediator (AS, that is, acetosyringone) were tested. Of the studied LMTs, laccase-ABTS treatment improved the degree of hydrolysis by 54%, while acetosyringone and TEMPO increased the hydrolysis yield by 49% and 36%, respectively. On the other hand, laccase-HBT treatment improved the degree of hydrolysis only by 22%, which was in the same order of magnitude as the increase induced by laccase treatment without added mediators (19%). The improvements were due to lignin modification that led to reduced adsorption of endoglucanase Cel5A and cellobiohydrolase Cel7A on lignin. TEMPO was the only mediator that modified cellulose structure by oxidizing hydroxyls at the C6 position to carbonyls and partially further to carboxyls. Oxidation of the reducing end C1 carbonyls was also observed. In contrast to lignin modification, oxidation of cellulose impaired enzymatic hydrolysis.

Conclusions

LMTs, in general, improved the enzymatic hydrolysis of SPS. The mechanism of the improvement was shown to be based on reduced adsorption of the main cellulases on SPS lignin rather than cellulose oxidation. In fact, at higher mediator concentrations the advantage of lignin modification in enzymatic saccharification was overcome by the negative effect of cellulose oxidation. For future applications, it would be beneficial to be able to understand and modify the binding properties of lignin in order to decrease unspecific enzyme binding and thus to increase the mobility, action, and recyclability of the hydrolytic enzymes.

     

Dynamic interaction of Trichoderma reesei cellobiohydrolases Cel6A and Cel7A and cellulose at equilibrium and during hydrolysis

The binding of cellobiohydrolases to cellulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding domains interact with cellulose and with each other and how binding changes during hydrolysis is still needed. In this study we used tritium labeling by reductive methylation to monitor binding of the two Trichoderma reesei cellobiohydrolases, Cel6A and Cel7A (formerly CBHII and CBHI), and their catalytic domains. Measuring hydrolysis by high-performance liquid chromatography and measuring binding by scintillation counting allowed us to correlate activity and binding as a function of the extent of degradation. These experiments showed that the density of bound protein increased with both Cel6A and Cel7A as hydrolysis proceeded, in such a way that the adsorption points moved off the initial binding isotherms. We also compared the affinities of the cellulose-binding domains and the catalytic domains to the affinities of the intact proteins and found that in each case the affinity of the enzyme was determined by the linkage between the catalytic and cellulose-binding domains. Desorption of Cel6A by dilution of the sample showed hysteresis (60 to 70% reversible); in contrast, desorption of Cel7A did not show hysteresis and was more than 90% reversible. These findings showed that the two enzymes differ with respect to the reversibility of binding.     

Dissecting and Reconstructing Synergism: IN SITU VISUALIZATION OF COOPERATIVITY AMONG CELLULASES*

Cellulose is the most abundant biopolymer and a major reservoir of fixed carbon on earth. Comprehension of the elusive mechanism of its enzymatic degradation represents a fundamental problem at the interface of biology, biotechnology, and materials science. The interdependence of cellulose disintegration and hydrolysis and the synergistic interplay among cellulases is yet poorly understood. Here we report evidence from in situ atomic force microscopy (AFM) that delineates degradation of a polymorphic cellulose substrate as a dynamic cycle of alternating exposure and removal of crystalline fibers. Direct observation shows that chain-end-cleaving cellobiohydrolases (CBH I, CBH II) and an internally chain-cleaving endoglucanase (EG), the major components of cellulase systems, take on distinct roles: EG and CBH II make the cellulose surface accessible for CBH I by removing amorphous-unordered substrate areas, thus exposing otherwise embedded crystalline-ordered nanofibrils of the cellulose. Subsequently, these fibrils are degraded efficiently by CBH I, thereby uncovering new amorphous areas. Without prior action of EG and CBH II, CBH I was poorly active on the cellulosic substrate. This leads to the conclusion that synergism among cellulases is morphology-dependent and governed by the cooperativity between enzymes degrading amorphous regions and those targeting primarily crystalline regions. The surface-disrupting activity of cellulases therefore strongly depends on mesoscopic structural features of the substrate: size and packing of crystalline fibers are key determinants of the overall efficiency of cellulose degradation.     

The 1,4-beta-D-glucan cellobiohydrolases from Phanerochaete chrysosporium. I. A system of synergistically acting enzymes homologous to Trichoderma reesei.

A physico-chemical and structural characterization of three 1,4-beta-D-glucan cellobiohydrolases (EC. 3.2.1.91), isolated from a culture filtrate of the white-rot fungus Phanerochaete chrysosporium, reveals that the cellulolytic enzyme secretion pattern and thus the general degradation strategy for P. chrysosporium is similar to that of Trichoderma reesei. Partial sequence data show that two of the isolated enzymes, i.e., CBHI, pI 3.82 and CBH62, pI 4.85, are homologous with CBHI and EGI from T. reesei; while, the third, i.e., CBH50, pI 4.87, is homologous to T. reesei CBHII. Limited proteolysis with papain cleaved each of the three enzymes into two domains: a core protein which retained full catalytic activity against low molecular weight substrates and a peptide fragment corresponding to the cellulose binding domain, in striking similarity to the structural organization of T. reesei. CBHI and CBH62 have their binding domain located at the C-terminus, whereas in CBH50 it is located at the N-terminus. It is evident that synergistically acting cellobiohydrolases is a general requirement for efficient hydrolysis of crystalline cellulose by cellulolytic fungi.     

The adsorption and enzyme activity profiles of specific Trichoderma reesei cellulase/xylanase components when hydrolyzing steam pretreated corn stover

Recycling of enzymes during biomass conversion is one potential strategy to reduce the cost of the hydrolysis step of cellulosic ethanol production. Devising an efficient enzyme recycling strategy requires a good understanding of how the enzymes adsorb, distribute, and interact with the substrate during hydrolysis. We investigated the interaction of individual Trichoderma reesei enzymes present in a commercial cellulase mixture during the hydrolysis of steam-pretreated corn stover (SPCS). The enzyme profiles were followed using zymograms, gel electrophoresis, enzyme activity assays and mass spectrometry. The adsorption and activity profiles of 6 specific enzymes Cel7A (CBH I), Cel7B (EG I), Cel5A (EG II), Xyn 10 (endo-1,4-β-xylanase III), Xyn 11 (endo-xylanase II), and β-glucosidase were characterized. Initially, each of the enzymes rapidly adsorbed onto the SPCS. However, this was followed by partial desorption to an adsorption equilibrium where the Cel7A, Cel7B, Xyn 10, and β-glucosidase were partially adsorbed to the SPCS and also found free in solution throughout the course of hydrolysis. In contrast, the Cel5A and Xyn 11 components remained primarily free in the supernatant. The Cel7A component also exhibited a partial desorption when the rate of hydrolysis leveled off as evidenced by MUC zymogram and SDS-PAGE. Those cellulase components that did not bind to the substrate were generally less stable and lost their activities within the first 24h when compared to enzymes that were distributed in both the liquid and solid phases. Therefore, to ensure maximum enzyme activity recovery, enzyme recycling seems to be most effective when short-term rounds of hydrolysis are combined with the recovery of enzymes from both the liquid and the solid phases and potentially enzyme supplementation to replenish lost activity.     

Structural Insights into the Affinity of Cel7A Carbohydrate-binding Module for Lignin

The high cost of hydrolytic enzymes impedes the commercial production of lignocellulosic biofuels. High enzyme loadings are required in part due to their non-productive adsorption to lignin, a major component of biomass. Despite numerous studies documenting cellulase adsorption to lignin, few attempts have been made to engineer enzymes to reduce lignin binding. In this work, we used alanine-scanning mutagenesis to elucidate the structural basis for the lignin affinity of Trichoderma reesei Cel7A carbohydrate binding module (CBM). T. reesei Cel7A CBM mutants were produced with a Talaromyces emersonii Cel7A catalytic domain and screened for their binding to cellulose and lignin. Mutation of aromatic and polar residues on the planar face of the CBM greatly decreased binding to both cellulose and lignin, supporting the hypothesis that the cellulose-binding face is also responsible for lignin affinity. Cellulose and lignin affinity of the 31 mutants were highly correlated, although several mutants displayed selective reductions in lignin or cellulose affinity. Four mutants with increased cellulose selectivity (Q2A, H4A, V18A, and P30A) did not exhibit improved hydrolysis of cellulose in the presence of lignin. Further reduction in lignin affinity while maintaining a high level of cellulose affinity is thus necessary to generate an enzyme with improved hydrolysis capability. This work provides insights into the structural underpinnings of lignin affinity, identifies residues amenable to mutation without compromising cellulose affinity, and informs engineering strategies for family one CBMs.     

Studies of the cellulolytic system of Trichoderma reesei QM 9414. Analysis of domain function in two cellobiohydrolases by limited proteolysis

Limited action of papain on the native forms of two cellobiohydrolases (CBH) from Trichoderma reesei (CBH I, 65 kDa, and CBH II, 58 kDa) leads to the isolation of the respective core fragments (56 kDa and 45 kDa) which are fully active on small, soluble substrates, but have a strongly reduced activity (respectively 10% and 50% of the initial value) on microcrystalline cellulose (Avicel). By partial sequencing at the C terminus of the CBH I core and at the N terminus of the CBH II core the papain cleavage sites have been assigned in the primary structures (at about residue 431 and 82 respectively). This limited action of papain on the native enzymes indicates the presence of hinge regions linking the core to these terminal glycopeptides. The latter conserved sequences appear either at the C or N terminus of several cellulolytic enzymes from Trichoderma reesei [Teeri et al. (1987) Gene 51, 43-52]. The specific activities of the intact enzymes and their cores on two forms of insoluble cellulose (crystalline, amorphous) differentiate the CBH I and CBH II in terms of adsorption and catalytic properties. Distinct functions can be attributed to the terminal peptides: for intact CBH II the N-terminal region contributes in the binding onto both cellulose types; the homologous C-terminal peptide in CBH I, however, only affects the interaction with microcrystalline cellulose. It could be inferred that CBH I and its core bind preferentially to crystalline regions. This seems to be corroborated by the results of CBH I/CBH II synergism experiments.     

Lipopeptide produced from <Emphasis Type="Italic">Bacillus</Emphasis> sp. W112 improves the hydrolysis of lignocellulose by specifically reducing non-productive binding of cellulases with and without CBMs

Background

Surfactants have attracted increasing interest for their capability to improve the enzymatic hydrolysis of lignocellulosic biomass. Compared to chemical surfactants, biosurfactants have a broader prospect for industrial applications because they are more environmentally friendly and more effective in some researches. Commercial cellulase preparations are mainly composed of endoglucanases (EGs) and cellobiohydrolases (CBHs) that possess carbohydrate-binding modules (CBMs). However, the effects of lipopeptide-type biosurfactants on enzymatic saccharification of lignocellulose and adsorption behaviors of cellulases with CBMs remain unclear.

Results

In this study, we found that Bacillus sp. W112 could produce a lipopeptide-type biosurfactant from untreated biomass, such as wheat bran and Jerusalem artichoke tuber. The lipopeptide could enhance the enzymatic hydrolysis of dilute acid pretreated Giant Juncao grass (DA-GJG) by fungal and bacterial enzymes. The enhancement increased over a range of temperatures from 30 to 50 °C. Lipopeptide was shown to be more effective in promoting DA-GJG saccharification than chemical surfactants at low dosages, with a best stimulatory degree of 20.8% at 2% loading of the substrates (w/w). Lipopeptide increased the thermostability of EG and CBH in commercial cellulase cocktails. Moreover, the dual effects of lipopeptide on the adsorption behaviors of cellulases were found. It specifically lowered the non-productive binding of cellulases to lignin and increased the binding of cellulases to cellulose. In addition, we investigated the influence of lipopeptide on the adsorption behaviors of CBHs with CBMs for the first time. Our results showed that lipopeptide reduced the adsorption of CBM-deleted CBH to DA-GJG to a greater extent than that of intact CBH while the non-productive binding of intact CBH to lignin was reduced more, indicating that lipopeptide decreased the binding of CBMs onto lignin but not their combination with cellulose.

Conclusions

In this study, we found that lipopeptide from Bacillus sp. W112 promoted the enzymatic hydrolysis of DA-GJG at relative low loadings. The stimulatory effect could be attributed to increasing the cellulase thermostability, reducing non-productive adsorption of cellulases with CBMs caused by lignin and enhancing the binding of cellulases to cellulose.

     

New Effective Method for Analysis of the Component Composition of Enzyme Complexes from <Emphasis Type="Italic">Trichoderma reesei</Emphasis>

A method for analysis of the component composition of multienzyme complexes secreted by the filamentous fungus Trichoderma reesei was developed. The method is based on chromatofocusing followed by further identification of protein fractions according to their substrate specificity and molecular characteristics of the proteins. The method allows identifying practically all known cellulases and hemicellulases of T. reesei: endoglucanase I (EG I), EG II, EG III, cellobiohydrolase I (CBH I), CBH II, xylanase I (XYL I), XYL II, beta-xylosidase, alpha-L-arabinofuranosidase, acetyl xylan esterase, mannanase, alpha-galactosidase, xyloglucanase, polygalacturonase, and exo-beta-1,3-glucosidase. The component composition of several laboratory and commercial T. reesei preparations was studied and the content of the individual enzymes in these preparations was quantified. The influence of fermentation conditions on the component composition of secreted enzyme complexes was revealed. The characteristic features of enzyme preparations obtained in "cellulase" and "xylanase" fermentation conditions are shown.     

Mode of action of cellulases on dyed cotton with a reactive dye

Cotton woven fabrics which were previously dyed with a reactive dye were treated with a commercial cellulase preparation. Dyeing with a reactive dye for cotton apparently inhibited the weight loss activity and saccharification activity of cellulase. In addition, dyed cotton was treated with highly purified cellulases which were exo-type cellulases (Cellobiohydrolase I (CBH I) and Cellobiohydrolase II (CBH II)) and endo-type cellulase (Endoglucanase II (EG II)). Exo-type cellulases were inhibited more than endo-type cellulase by dyeing in the case of saccharification activity. CBH I was severely inhibited by dyeing as compared with CBH II or EG II from the viewpoint of morphological changes in the fiber surface. Dyes on the cellulose substrates severely influenced CBH I in spite of the rare modification, because CBH I hydrolyzed cellulose with true-processive action. The change in the activity of each cellulase component on dyed cotton can affect the synergistic action of cellulases.     

Binding and reversibility of Thermobifida fusca Cel5A,Cel6B,and Cel48A and their respective catalytic domains to bacterial microcrystalline cellulose

The binding and reversibility of Thermobifida fusca intact Cel5A, Cel5B, and Cel48A and their corresponding catalytic domains (CDs) to bacterial microcrystalline cellulose (BMCC) were studied at 5 degrees C. The binding of the intact cellulases and of corresponding CDs to BMCC was irreversible in all regions: Langmuir binding (region I), interstice penetration (region II), and interstice saturation (region III). The three cellulose binding domains (CBMs) bind reversibly in "region I" although their respective CDs do not. The irreversible binding of these enzymes in the Langmuir region does not satisfy the Langmuir assumption; however, the overall fit of the Interstice Saturation model, which includes binding in MBCC interstices as well as on the freely accessible surface (Jung et al., 2002a) is good. The main limitation of the model is that it does not explicitly address a mechanism for forming the enzyme-substrate complex within the active site of the CDs.