Partial atomic charges of amino acids in proteins

Using a semiempirical quantum mechanical procedure (FCPAC) we have calculated the partial atomic charges of amino acids from 494 high-resolution protein structures. To analyze the influence of the protein's environment, we considered each residue under two conditions: either as the center of a tripeptide with PDB structure geometry (free) or as the center of 13-16 amino acid clusters extracted from the PDB structure (buried). The partial atomic charges from residues in helices and in sheets were separated. The FCPAC partial atomic charges of the Cbeta and Calpha of most residues correlate with their helix propensity, positively for Cbeta and negatively for Calpha (r2 = 0.76 and 0.6, respectively). The main consequence of burying residues in proteins is the polarization of the backbone C=O bond, which is more pronounced in helices than in sheets. The average shift of the oxygen partial charges that results from burying is -0.120 in helix and -0.084 in sheet with the charge of the proton as unit. Linear correlations are found between the average NMR chemical shifts and the average FCPAC partial charges of Calpha (r2 = 0.8-0.85), N (r3 = 0.67-0.72), and Cbeta (r2 = 0.62) atoms. Correlations for helix and beta-sheet FCPAC partial charges show parallel regressions, suggesting that the charge variations due to burying in proteins differentiate between the dihedral angle effects and the polarization of backbone atoms.     

A C-H triplebond O hydrogen bond stabilized polypeptide chain reversal motif at the C terminus of helices in proteins

The serendipitous observation of a C-H cdots, three dots, centered O hydrogen bond mediated polypeptide chain reversal in synthetic peptide helices has led to a search for the occurrence of a similar motif in protein structures. From a dataset of 634 proteins, 1304 helices terminating in a Schellman motif have been examined. The C-H triplebond O interaction between the T-4 C(alpha)H and T+1 Cz doublebond O group (C triplebond O< or =3.5A) becomes possible only when the T+1 residue adopts an extended beta conformation (T is defined as the helix terminating residue adopting an alpha(L) conformation). In all, 111 examples of this chain reversal motif have been identified and the compositional and conformational preferences at positions T-4, T, and T+1 determined. A marked preference for residues like Ser, Glu and Gln is observed at T-4 position with the motif being further stabilized by the formation of a side-chain-backbone O triplebond H-N hydrogen bond involving the side-chain of residue T-4 and the N-H group of residue T+3. In as many as 57 examples, the segment following the helix was extended with three to four successive residues in beta conformation. In a majority of these cases, the succeeding beta strand lies approximately antiparallel with the helix, suggesting that the backbone C-H triplebond O interactions may provide a means of registering helices and strands in an antiparallel orientation. Two examples were identified in which extended registry was detected with two sets of C-H cdots, three dots, centered O hydrogen bonds between (T-4) C(alpha)H triplebond O (T+1) and (T-8) C(alpha)H triplebondC doublebond O (T+3).     

Structural analysis of peptide helices containing centrally positioned lactic acid residues

The effect of insertion of lactic acid (Lac) residues into peptide helices has been probed using specifically designed sequences. The crystal structures of 11-residue and 14-residue depsipeptides Boc-Val-Val-Ala-Leu-Val-Lac-Leu-Aib-Val-Ala-Leu-OMe (1) and Boc-Val-Ala-Leu-Aib-Val-Ala-Leu-Val-Lac-Leu-Aib-Val-Ala-Leu-OMe (3), containing centrally positioned Lac residues, have been determined. The structure of an 11-residue peptide Boc-Val-Ala-Leu-Aib-Val-Ala-Leu-Aib-Val-Ala-Leu-OMe (2), analog of a which is an amide previously determined Lac-containing depsipeptide, Boc-Val-Ala-Leu-Aib-Val-Lac-Leu-Aib-Val-Ala-Leu-OMe I. L. Karle, C. Das, and P. Balaram, Biopolymers, Vol. 59, (2001) pp. 276-289], is also reported. Peptide 1 adopts a helical fold, which is stabilized by mixture of 4-->1 and 5-->1 hydrogen bonds. Peptide 2 adopts a completely alpha-helical conformation stabilized by eight successive 5-->1 hydrogen bonds. Peptide 3 appears to be predominately alpha-helical, with seven 5-->1 hydrogen bonds and three 4-->1 interaction interspersed in the sequence. In the structure of peptide 3 in addition to water molecules in the head-to-tail region, hydration at an internal segment of the helix is also observed. A comparison of five related peptide helices, containing a single Lac residue, reveals that the hydroxy acid can be comfortably accommodated at interior positions in the helix, with the closest C=O...O distances lying between 2.8 and 3.3 A.     

Helix packing of leucine-rich peptides: a parallel leucine ladder in the structure of Boc-Aib-Leu-Aib-Aib-Leu-Leu-Leu-Aib-Leu-Aib-OMe.

The packing of peptide helices in crystals of the leucine-rich decapeptide Boc-Aib-Leu-Aib-Aib-Leu-Leu-Leu-Aib-Leu-Aib-OMe provides an example of ladder-like leucylleucyl interactions between neighboring molecules. The peptide molecule forms a helix with five 5----1 hydrogen bonds and two 4----1 hydrogen bonds near the C terminus. Three head-to-tail NH ... O = C hydrogen bonds between helices form continuous columns of helices in the crystal. The helicial columns associate in an antiparallel fashion, except for the association of Leu ... Leu side chains, which occurs along the diagonal of the cell where the peptide helices are parallel. The peptide, with formula C56H102N10O13, crystallizes in space group P2(1)2(1)2(1) with Z = 4 and cell parameters a = 16.774(3) A, b = 20.032(3) A and c = 20.117(3) A; overall agreement factor R = 10.7% for 2014 data with magnitude of F(obs) greater than 3 sigma (F); resolution 1.0 A.     

Helix packing motif common to the crystal structures of two undecapeptides containing dehydrophenylalanine residues: implications for the de novo design of helical bundle super secondary structural modules

De novo designed peptide based super secondary structures are expected to provide scaffolds for the incorporation of functional sites as in proteins. Self-association of peptide helices of similar screw sense, mediated by weak interactions, has been probed by the crystal structure determination of two closely related peptides: Ac-Gly1-Ala2-Delta Phe3-Leu4-Val5-DeltaPhe6-Leu7-Val8-DeltaPhe9-Ala10-Gly11-NH2 (I) and Ac-Gly1-Ala2-DeltaPhe3-Leu4-Ala5-DeltaPhe6-Leu7-Ala8-DeltaPhe9-Ala10-Gly11-NH2 (II). The crystal structures determined to atomic resolution and refined to R factors 8.12 and 4.01%, respectively, reveal right-handed 3(10)-helical conformations for both peptides. CD has also revealed the preferential formation of right-handed 3(10)-helical conformations for both molecules. Our aim was to critically analyze the packing of the helices in the solid state with a view to elicit clues for the design of super secondary structural motifs such as two, three, and four helical bundles based on helix-helix interactions. An important finding is that a packing motif could be identified common to both the structures, in which a given peptide helix is surrounded by six other helices reminiscent of transmembrane seven helical bundles. The outer helices are oriented either parallel or antiparallel to the central helix. The helices interact laterally through a combination of N--H...O, C--H...O, and C--H...pi hydrogen bonds. Layers of interacting leucine residues are seen in both peptide crystal structures. The packing of the peptide helices in the solid state appears to provide valuable leads for the design of super secondary structural modules such as two, three, or four helix bundles by connecting adjacent antiparallel helices through suitable linkers such as tetraglycine segments.     

The role of carbon-donor hydrogen bonds in stabilizing tryptophan conformations

Although most side-chain torsion angles correspond to low-energy rotameric positions, deviations occur with significant frequency. One striking example arises in Trp residues, which have an important role in stabilizing protein structures because of their size and mixed hydrophobic/hydrophilic character. Ten percent of Trp side-chains have unexplained conformations with chi(2) near 0 degrees instead of the expected 90 degrees. The current work is a structural and energetic analysis of these conformations. It is shown that many Trp residues with these orientations are stabilized by three-center carbon-donor hydrogen bonds of the form C-H...X...H-C, where X is a polar hydrogen-bond acceptor in the environment of the side-chain. The bridging hydrogen bonds occur both within the Trp side-chain and between the side-chain and the local protein backbone. Free energy maps of an isolated Trp residue in an explicit water environment show a minimum corresponding to the off-rotamer peak observed in the crystallographic data. Bridging carbon-donor hydrogen bonds are also shown to stabilize on-rotamer Trp conformations, and similar bridging hydrogen bonds also stabilize some off-rotamer Asp conformations. The present results suggest a previously unrecognized role for three-center carbon-donor hydrogen bonds in protein structures and support the view that the off-rotamer Trp side-chain orientations are real rather than artifacts of crystallographic refinements. Certain of the off-rotamer Trp conformations appear to have a functional role.     

Hydrogen bonds with pi-acceptors in proteins: frequencies and role in stabilizing local 3D structures

A comprehensive structural analysis of X--H...pi hydrogen bonding in proteins is performed based on 592 published high-resolution crystal structures (< or = 1.6 A). All potential donors and acceptors are considered, including acidic C--H groups. The sample contains 1311 putative X--H...pi hydrogen bonds with N--H, O--H or S--H donors, that is about one per 10.8 aromatic residues. By far the most efficient pi-acceptor is the side-chain of Trp, which accepts one X--H...pi hydrogen bond per 5.7 residues. The focus of the analysis is on recurrent structural patterns involving regular secondary structure elements. Numerous examples are found where peptide X--H...pi interactions are functional in stabilization of helix termini, strand ends, strand edges, beta-bulges and regular turns. Side-chain X--H...pi hydrogen bonds are formed in considerable numbers in alpha-helices and beta-sheets. Geometrical data on various types of X--H...pi hydrogen bonds are given.     

Strong and weak hydrogen bonds in the protein-ligand interface

The characteristics of N--H...O, O--H...O, and C--H...O hydrogen bonds and other weak intermolecular interactions are analyzed in a large and diverse group of 251 protein-ligand complexes using a new computer program that was developed in-house for this purpose. The interactions examined in the present study are those which occur in the active sites, defined here as a sphere of 10 A radius around the ligand. Notably, N--H...O and O--H...O bonds tend towards linearity. Multifurcated interactions are especially common, especially multifurcated acceptors, and the average degree of furcation is 2.6 hydrogen bonds per furcated acceptor. A significant aspect of this study is that we have been able to assess the reliability of hydrogen bond geometry as a function of crystallographic resolution. Thresholds of 2.3 and 2.0 A are established for strong and weak hydrogen bonds, below which hydrogen bond geometries may be safely considered for detailed analysis. Interactions involving water as donor or acceptor, and C--H...O bonds with Gly and Tyr as donors are ubiquitous in the active site. A similar trend was observed in an external test set of 233 protein-ligand complexes belonging to the kinase family. Weaker interactions like X--H...pi (X = C, N, O) and those involving halogen atoms as electrophiles or nucleophiles have also been studied. We conclude that the strong and weak hydrogen bonds are ubiquitous in protein-ligand recognition, and that with suitable computational tools very large numbers of strong and weak intermolecular interactions in the ligand-protein interface may be analyzed reliably. Results confirm earlier trends reported previously by us but the extended nature of the present data set mean that the observed trends are more reliable.     

Equilibrium hydrogen exchange reveals extensive hydrogen bonded secondary structure in the on-pathway intermediate of Im7

The four-helical immunity protein Im7 folds through an on-pathway intermediate that has a specific, but partially misfolded, hydrophobic core. In order to gain further insight into the structure of this species, we have identified the backbone hydrogen bonds formed in the ensemble by measuring the amide exchange rates (under EX2 conditions) of the wild-type protein and a variant, I72V. In this mutant the intermediate is significantly destabilised relative to the unfolded state (deltadeltaG(ui) = 4.4 kJ/mol) but the native state is only slightly destabilised (deltadeltaG(nu) = 1.8 kJ/mol) at 10 degrees C in 2H2O, pH* 7.0 containing 0.4 M Na2SO4, consistent with the view that this residue forms significant non-native stabilising interactions in the intermediate state. Comparison of the hydrogen exchange rates of the two proteins, therefore, enables the state from which hydrogen exchange occurs to be identified. The data show that amides in helices I, II and IV in both proteins exchange slowly with a free energy similar to that associated with global unfolding, suggesting that these helices form highly protected hydrogen-bonded helical structure in the intermediate. By contrast, amides in helix III exchange rapidly in both proteins. Importantly, the rate of exchange of amides in helix III are slowed substantially in the Im7* variant, I72V, compared with the wild-type protein, whilst other amides exchange more rapidly in the mutant protein, in accord with the kinetics of folding/unfolding measured using chevron analysis. These data demonstrate, therefore, that local fluctuations do not dominate the exchange mechanism and confirm that helix III does not form stable secondary structure in the intermediate. By combining these results with previously obtained Phi-values, we show that the on-pathway folding intermediate of Im7 contains extensive, stable hydrogen-bonded structure in helices I, II and IV, and that this structure is stabilised by both native and non-native interactions involving amino acid side-chains in these helices.     

Helix packing moments reveal diversity and conservation in membrane protein structure

Helical membrane proteins are more tightly packed and the packing interactions are more diverse than those found in helical soluble proteins. Based on a linear correlation between amino acid packing values and interhelical propensity, we propose the concept of a helix packing moment to predict the orientation of helices in helical membrane proteins and membrane protein complexes. We show that the helix packing moment correlates with the helix interfaces of helix dimers of single pass membrane proteins of known structure. Helix packing moments are also shown to help identify the packing interfaces in membrane proteins with multiple transmembrane helices, where a single helix can have multiple contact surfaces. Analyses are described on class A G protein-coupled receptors (GPCRs) with seven transmembrane helices. We show that the helix packing moments are conserved across the class A family of GPCRs and correspond to key structural contacts in rhodopsin. These contacts are distinct from the highly conserved signature motifs of GPCRs and have not previously been recognized. The specific amino acid types involved in these contacts, however, are not necessarily conserved between subfamilies of GPCRs, indicating that the same protein architecture can be supported by a diverse set of interactions. In GPCRs, as well as membrane channels and transporters, amino acid residues with small side-chains (Gly, Ala, Ser, Cys) allow tight helix packing by mediating strong van der Waals interactions between helices. Closely packed helices, in turn, facilitate interhelical hydrogen bonding of both weakly polar (Ser, Thr, Cys) and strongly polar (Asn, Gln, Glu, Asp, His, Arg, Lys) amino acid residues. We propose the use of the helix packing moment as a complementary tool to the helical hydrophobic moment in the analysis of transmembrane sequences.     

Characterization of the backbone geometry of protein native state structures

We present a simple method for analyzing the geometry of noncovalent residue-residue interactions stabilizing the protein structure, which takes into account the constraints on the local backbone geometry. We find that the principal geometrical constraints are amino acid aspecific and are associated with hydrogen bond formation in helices and sheets. In contrast, amino acid residues in nonhelical and nonextended conformations, which make noncovalent interactions stabilizing the protein tertiary structure, display greater flexibility. We apply the method to an analysis of the packing of helices in helical bundle proteins requiring an efficient packing of amino acid side-chains of the interacting helices.     

3(10)-helices in proteins are parahelices

The 3(10)-helix is characterized by having at least two consecutive hydrogen bonds between the main-chain carbonyl oxygen of residue i and the main-chain amide hydrogen of residue i + 3. The helical parameters--pitch, residues per turn, radius, and root mean square deviation (rmsd) from the best-fit helix--were determined by using the HELFIT program. All 3(10)-helices were classified as regular or irregular based on rmsd/(N - 1)1/2 where N is the helix length. For both there are systematic, position-specific shifts in the backbone dihedral angles. The average phi, psi shift systematically from approximately -58 degrees, approximately -32 degrees to approximately -90 degrees, approximately -4 degrees for helices 5, 6, and 7 residues long. The same general pattern is seen for helices, N = 8 and 9; however, in N = 9, the trend is repeated with residues 6, 7, and 8 approximately repeating the phi, psi of residues 2, 3, and 4. The residues per turn and radius of regular 3(10)-helices decrease with increasing length of helix, while the helix pitch and rise per residue increase. That is, regular 3(10)-helices become thinner and longer as N increases from 5 to 8. The fraction of regular 3(10)-helices decreases linearly with helix length. All longer helices, N > or = 9 are irregular. Energy minimizations show that regular helices become less stable with increasing helix length. These findings indicate that the definition of 3(10)-helices in terms of average, uniform dihedral angles is not appropriate and that it is inherently unstable for a polypeptide to form an extended, regular 3(10)-helix. The 3(10)-helices observed in proteins are better referred to parahelices.     

Helix propensities of the amino acids measured in alanine-based peptides without helix-stabilizing side-chain interactions.

Helix propensities of the amino acids have been measured in alanine-based peptides in the absence of helix-stabilizing side-chain interactions. Fifty-eight peptides have been studied. A modified form of the Lifson-Roig theory for the helix-coil transition, which includes helix capping (Doig AJ, Chakrabartty A, Klingler TM, Baldwin RL, 1994, Biochemistry 33:3396-3403), was used to analyze the results. Substitutions were made at various positions of homologous helical peptides. Helix-capping interactions were found to contribute to helix stability, even when the substitution site was not at the end of the peptide. Analysis of our data with the original Lifson-Roig theory, which neglects capping effects, does not produce as good a fit to the experimental data as does analysis with the modified Lifson-Roig theory. At 0 degrees C, Ala is a strong helix former, Leu and Arg are helix-indifferent, and all other amino acids are helix breakers of varying severity. Because Ala has a small side chain that cannot interact significantly with other side chains, helix formation by Ala is stabilized predominantly by the backbone ("peptide H-bonds"). The implication for protein folding is that formation of peptide H-bonds can largely offset the unfavorable entropy change caused by fixing the peptide backbone. The helix propensities of most amino acids oppose folding; consequently, the majority of isolated helices derived from proteins are unstable, unless specific side-chain interactions stabilize them.     

Peptide design using alpha,beta-dehydro amino acids: from beta-turns to helical hairpins

Incorporation of alpha,beta-dehydrophenylalanine (DeltaPhe) residue in peptides induces folded conformations: beta-turns in short peptides and 3(10)-helices in larger ones. A few exceptions-namely, alpha-helix or flat beta-bend ribbon structures-have also been reported in a few cases. The most favorable conformation of DeltaPhe residues are (phi,psi) approximately (-60 degrees, -30 degrees ), (-60 degrees, 150 degrees ), (80 degrees, 0 degrees ) or their enantiomers. DeltaPhe is an achiral and planar residue. These features have been exploited in designing DeltaPhe zippers and helix-turn-helix motifs. DeltaPhe can be incorporated in both right and left-handed helices. In fact, consecutive occurrence of three or more DeltaPhe amino acids induce left-handed screw sense in peptides containing L-amino acids. Weak interactions involving the DeltaPhe residue play an important role in molecular association. The C--H.O==C hydrogen bond between the DeltaPhe side-chain and backbone carboxyl moiety, pi-pi stacking interactions between DeltaPhe side chains belonging to enantiomeric helices have shown to stabilize folding. The unusual capability of a DeltaPhe ring to form the hub of multicentered interactions namely, a donor in aromatic C--H.pi and C--H.O==C and an acceptor in a CH(3).pi interaction suggests its exploitation in introducing long-range interactions in the folding of supersecondary structures.     

Stereospecific interactions of proline residues in protein structures and complexes

The constrained backbone torsion angle of a proline (Pro) residue has usually been invoked to explain its three-dimensional context in proteins. Here we show that specific interactions involving the pyrrolidine ring atoms also contribute to its location in a given secondary structure and its binding to another molecule. It is adept at participating in two rather non-conventional interactions, C-H...pi and C-H...O. The geometry of interaction between the pyrrolidine and aromatic rings, vis-à-vis the occurrence of the C-H...pi interactions has been elucidated. Some of the secondary structural elements stabilized by Pro-aromatic interactions are beta-turns, where a Pro can interact with an adjacent aromatic residue, and in antiparallel beta-sheet, where a Pro in an edge strand can interact with an aromatic residue in the adjacent strand at a non-hydrogen-bonded site. The C-H groups at the Calpha and Cdelta positions can form strong C-H...O interactions (as seen from the clustering of points) and such interactions involving a Pro residue at C' position relative to an alpha-helix can cap the hydrogen bond forming potentials of the free carbonyl groups at the helix C terminus. Functionally important Pro residues occurring at the binding site of a protein almost invariably engage aromatic residues (with one of them being held by C-H...pi interaction) from the partner molecule in the complex, and such aromatic residues are highly conserved during evolution.     

Competing interactions contributing to alpha-helical stability in aqueous solution.

The stability of a 15-residue peptide has been investigated using CD spectroscopy and molecular simulation techniques. The sequence of the peptide was designed to include key features that are known to stabilize alpha-helices, including ion pairs, helix dipole capping, peptide bond capping, and aromatic interactions. The degree of helicity has been determined experimentally by CD in three solvents (aqueous buffer, methanol, and trifluoroethanol) and at two temperatures. Simulations of the peptide in the aqueous system have been performed over 500 ps at the same two temperatures using a fully explicit solvent model. Consistent with the CD data, the degree of helicity is decreased at the higher temperature. Our analysis of the simulation results has focused on competition between different side-chain/side-chain and side-chain/main-chain interactions, which can, in principle, stabilize the helix. The unfolding in aqueous solution occurs at the amino terminus because the side-chain interactions are insufficient to stabilize both the helix dipole and the peptide hydrogen bonds. Loss of capping of the peptide backbone leads to water insertion within the first peptide hydrogen bond and hence unfolding. In contrast, the carboxy terminus of the alpha-helix is stable in both simulations because the C-terminal lysine residue stabilizes the helix dipole, but at the expense of an ion pair.     

Characterization of the cAMP-dependent protein kinase catalytic subunit Cgamma expressed and purified from sf9 cells

The Cgamma and Calpha subunits of the cAMP-dependent protein kinase (PKA) contain 350 amino acids that are highly homologous (83% amino acid sequence), with 91% homology within the catalytic domain (a.a. 40-300). Unlike Cgamma, the Calpha subunit has been readily purified and characterized as a recombinant protein in vitro, in intact cells, and in vivo. This report describes for the first time the expression, purification, and characterization of Cgamma. The expression of active Cgamma was eukaryote-specific, from mammalian and insect cells, but not bacteria. Active recombinant Cgamma was optimally expressed and purified to homogeneity from Sf9 cells with a 273-fold increase in specific activity and a 21% recovery after sequential CM-Sepharose and Sephacryl S-300 chromatography. The specific activity of pure Cgamma was 0.31 and 0.81 U/mg with kemptide and histone as substrates, respectively. Physical characterization showed Cgamma had a lower apparent molecular weight and Stokes radii than Calpha, suggesting differences in tertiary structures. Steady-state kinetics demonstrated that like Calpha and Cbeta, Cgamma phosphorylates substrates requiring basic amino acids at P-3 and P-2. However, Cgamma generally exhibited a lower Km and Vmax than Calpha for peptide substrates tested. Cgamma also exhibited a distinct pseudosubstrate specificity showing inhibition by homogeneous preparations of RIalpha and RIIalpha-subunits, but not by pure recombinant protein kinase inhibitors PKIalpha and PKIbeta, PKA-specific inhibitors. These studies suggest that Cgamma and Calpha exhibit differences in structure and function in vitro, supporting the hypothesis that functionally different C-subunit isozymes could diversify and/or fine-tune cAMP signal transduction downstream of PKA activation.     

Straight-chain non-polar amino acids are good helix-formers in water

For comparison with earlier data on naturally occurring non-polar amino acids (Ala, Leu, Phe, Val, Ile), the comparative helix-forming tendencies have been measured for non-polar amino acid residues that have unbranched side-chains, with an ethyl, propyl or butyl group, and also for methionine. The substitutions are made in a 17-residue alanine-based peptide. The results show that straight-chain non-polar amino acids have high helix-forming tendencies compared to beta-branched non-polar amino acids. Restriction of side-chain conformations in the helix, with a corresponding reduction in conformational entropy, is the likely explanation. There is a small increase in helix-forming tendency as the side-chain increases in length from ethyl to butyl, which suggests that a helix-stabilizing hydrophobic interaction is being detected.     

Registering alpha-helices and beta-strands using backbone C-H...O interactions

The possible occurrence of a novel helix terminating structural motif in proteins involving a stabilizing short C-H...O interaction has been examined using a dataset of 634 non-homologous protein structures (相似文献   

Molecular dissection,tissue localization and Ca2+ binding of the ryanodine receptor of Caenorhabditis elegans

We investigated the possible role of residues at the Ccap position in an alpha-helix on protein stability. A set of 431 protein alpha-helices containing a C'-Gly from the Protein Data Bank (PDB) was analyzed, and the normalized frequencies for finding particular residues at the Ccap position, the average fraction of buried surface area, and the hydrogen bonding patterns of the Ccap residue side-chain were calculated. We found that on average the Ccap position is 70% buried and noted a significant correlation (R=0.8) between the relative burial of this residue and its hydrophobicity as defined by the Gibbs energy of transfer from octanol or cyclohexane to water. Ccap residues with polar side-chains are commonly involved in hydrogen bonding. The hydrogen bonding pattern is such that, the longer side-chains of Glu, Gln, Arg, Lys, His form hydrogen bonds with residues distal (>+/-4) in sequence, while the shorter side-chains of Asp, Asn, Ser, Thr exhibit hydrogen bonds with residues close in sequence (<+/-4), mainly involving backbone atoms. Experimentally we determined the thermodynamic propensities of residues at the Ccap position using the protein ubiquitin as a model system. We observed a large variation in the stability of the ubiquitin variants depending on the nature of the Ccap residue. Furthermore, the measured changes in stability of the ubiquitin variants correlate with the hydrophobicity of the Ccap residue. The experimental results, together with the statistical analysis of protein structures from the PDB, indicate that the key hydrophobic capping interactions between a helical residue (C3 or C4) and a residue outside the helix (C", C3' or C4') are frequently enhanced by the hydrophobic interactions with Ccap residues.