Aqueous polymer two-phase systems formed by new thermoseparating polymers

A set of new polymers that can be used as phase forming components in aqueous two-phase systems is presented. All polymers studied have thermoseparating properties i.e. form one separate polymer enriched phase and one aqueous solution when heated above the critical temperature. This property makes the polymers attractive alternatives to the polymers used in traditional aqueous two-phase systems such as poly(ethylene glycol) (PEG) and dextran. The thermal phase separation simplifies recycling of the polymers, thus making the aqueous two-phase systems more cost efficient and suitable for use in large scale. Thermoseparating polymers studied have been copolymers of ethylene oxide and propylene oxide (EO-PO), poly (N-isopropylacrylamide) (poly-NIPAM), poly vinyl caprolactam (poly-VCL) and copolymers of N-isopropylacrylamide and vinyl caprolactam with vinyl imidazole (poly(NIPAM-VI) and poly(VCL-VI), respectively). In addition, the copolymer poly(NIPAM-VI) has the property to be uncharged at pH above 7.0 and positively charged at lower pH. This allows the partitioning of protein to be directed by changing the pH in the system instead of the traditional addition of salt to direct the partitioning. Hydrophobically modified EO-PO copolymer (HM-(EO-PO)) with alkyl groups (C₁₄) at both ends forms two-phase system with for example poly(NIPAM-VI). The phase diagram for poly(NIPAM-VI)/HM-(EO-PO) was determined and the model proteins lysozyme and BSA were partitioned in this system. For BSA in poly(NIPAM-VI)/HM-(EO-PO) system a change in pH from 8.0 to 5.4 results in a change of partition coefficient from K=0.8 to K=5.1, i.e. BSA could be transferred from the HM-(EO-PO) phase to the poly(NIPAM-VI) phase. BSA partitioning in poly(NIPAM-VI)/HM-(EO-PO) system allows quantitative BSA recovery, and recoveries of poly(NIPAM-VI) and HM-(EO-PO) were 53% and 92%, respectively, after the thermoseparation step.     

The effect of KSCN on the partition of proteins in polyethylene glycol/(NH4)2SO4 aqueous two-phase system

The effect of potassium thiocyanate on the partitioning of lysozyme and BSA in polyethylene glycol 2000/ammonium sulfate aqueous two-phase system has been investigated. As a result of the addition of potassium thiocyanate to the PEG/ammonium sulfate system, the PEG/mixed salts aqueous two-phase system was formed. It was found that the potassium thiocyanate could alter the pH difference between the two phases, and, thus, influence the partition coefficients of the differently charged proteins. The relationship between partition coefficient of the proteins and pH difference between two phases has been discussed. It was proposed that the pH difference between two phases could be employed as the measurement of electrostatic driving force for the partitioning of charged proteins in polyethylene 2000/ammonium sulfate aqueous two-phase system.     

牛血清白蛋白在聚乙二醇/葡聚糖双水相体系中分配特性的研究

采用考马斯亮蓝G250染色法测得室温下BSA在PEG/dextran双水相体系中的分配系数。以BSA在PEG/dextran体系的下相富集为目标,研究了PEG的分子量、浓度、dextran浓度以及所加入中性盐的种类与浓度、体系pH诸因素对其分配特性的影响。实验结果表明,在PEG4000/dextran体系中,采用PEG质量分数9%-dextran质量分数9%的浓度组成,同时在pH=7.0,NaC l浓度为0.2 mol.L-1或pH6.0,NaC l浓度为0.34 mol.L-1的工艺条件下萃取BSA均可达最小分配系数,其值为0.014。     

Thermoseparating water/polymer system: a novel one-polymer aqueous two-phase system for protein purification

In this study we show that proteins can be partitioned and separated in a novel aqueous two-phase system composed of only one polymer in water solution. This system represents an attractive alternative to traditional two-phase systems which uses either two polymers (e.g., PEG/dextran) or one polymer in high-salt concentration (e.g., PEG/salt). The polymer in the new system is a linear random copolymer composed of ethylene oxide and propylene oxide groups which has been hydrophobically modified with myristyl groups (C(14)H(29)) at both ends (HM-EOPO). This polymer thermoseparates in water, with a cloud point at 14 degrees C. The HM-EOPO polymer forms an aqueous two-phase system with a top phase composed of almost 100% water and a bottom phase composed of 5-9% HM-EOPO in water when separated at 17-30 degrees C. The copolymer is self-associating and forms micellar-like structures with a CMC at 12 microM (0.01%). The partitioning behavior of three proteins (lysozyme, bovine serum albumin, and apolipoprotein A-1) in water/HM-EOPO two-phase systems has been studied, as well as the effect of various ions, pH, and temperature on protein partitioning. The amphiphilic protein apolipoprotein A-1 was strongly partitioned to the HM-EOPO-rich phase within a broad-temperature range. The partitioning of hydrophobic proteins can be directed with addition of salt. Below the isoelectric point (pI) BSA was partitioned to the HM-EOPO-rich phase and above the pI to the water phase when NaClO(4)was added to the system. Lysozyme was directed to the HM-EOPO phase with NaClO(4), and to the water phase with Na-phosphate. The possibility to direct protein partitioning between water and copolymer phases shows that this system can be used for protein separations. This was tested on purification of apolipoprotein A-1 from human plasma and Escherichia coli extract. Apolipoprotein A-1 could be recovered in the HM-EOPO-rich phase and the majority of contaminating proteins in the water phase. By adding a new water/buffer phase at higher pH and with 100 mM NaClO(4), and raising the temperature for separation, the apolipoprotein A-1 could be back-extracted from the HM-EOPO phase into the new water phase. This novel system has a strong potential for use in biotechnical extractions as it uses only one polymer and can be operated at moderate temperatures and salt concentrations and furthermore, the copolymer can be recovered.     

Purification and aqueous two-phase partitioning properties of recombinant Vitreoscilla hemoglobin.

Soluble recombinant Vitreoscilla hemoglobin was purified from E. coli lysate by sequential two-phase extraction techniques. Extraction of lysate containing VHb in PEG/dextran gave a 3.6-fold increase in VHb purity in the PEG-rich phase via a size exclusion mechanism. Further extraction of the recovered PEG phase in PEG/sodium sulfate gave an additional 2.0-fold increase in purity in the PEG-rich phase due to an electrostatic mechanism. Final extraction of the PEG phase in PEG/magnesium sulfate gave an additional 1.3-fold increase in VHb purity in the magnesium sulfate-rich phase. The final yield from the extractive purification was 47% with purity of VHb estimated to be greater than 95%. Yields from the sulfate salt extractions are essentially quantitative due to the extreme partitioning behavior of VHb in these systems. VHb partition coefficients as large as 46 in PEG/sodium sulfate and as small as 0.06 in PEG/magnesium sulfate were observed. Similar small partition coefficients were obtained with PEG/manganese sulfate extractions. This dramatic effect of divalent cation content on the partition coefficient of VHb in PEG/sulfate salt systems was investigated by pH and magnesium ion titration experiments. Results show the effect to be largest and nearly constant for pH values greater than 6.0 and diminished at lower pH values. A model based on magnesium ion binding to negatively charged amino acids is shown to correlate with the data well. Based on model formulation and the partitioning behavior of contaminant proteins, the observed effect is expected to be applicable to other proteins.     

Determinants of liposome partitioning in aqueous two-phase systems: Evaluation by means of a factorial design

This article evaluates the influence of five parameters on liposome partitioning in aqueous two-phase systems (ATPSs), composed of poly(ethyleneglycol) (PEG)/dextran (Dx), using the factorial experimental design together with a multiple regression. Mathematical models to quantify the influence of these parameters, individually and/or jointly, on liposome partitioning in ATPS were developed. The models were statistically tested and verified by experimentation. This approach was then used to define the conditions for the preferential accumulation of liposomes in the top PEG-rich phase. The models predicted a significant effect of liposome surface charge, PEG molecular weight, phase-forming polymer concentration, and phosphate ion concentration on the partition behavior of liposomes. For negatively charged liposomes, it was found that the smaller the molecular weight of PEG and polymer concentration and the larger the phosphate ion concentration, the greater the partition coefficient of the liposomes. No significant effect of pH, at the range of 6-8, on liposome partitioning was noted. This approach has led to the development of an optimal two-phase system where 90% of negatively charged liposomes accumulated in the PEG phase. In addition to the general scientific value of this research, it has a technological importance as ATPSs may be useful for removing the unentrapped drug from liposomes during their preparation for pharmaceutical applications. (c) 1996 John Wiley & Sons, Inc.     

Partitioning studies of α-lactalbumin in environmental friendly poly (ethylene glycol)—citrate salt aqueous two phase systems

Aqueous two-phase systems (ATPS) formed by polymer and salt have been utilized to enrich the desired biomolecule into one of the phase with higher yield and purity. The eco-friendly, biodegradable poly ethylene glycol (PEG) and different citrate salts were chosen as ATPS phase components to investigate the partitioning behavior of α-lactalbumin (α-La). System factors and process parameters such as type and concentration of salt, molecular weight and concentration of PEG, pH, temperature and the effect of additives were studied and the results are discussed in detail. PEG 1000–tri-potassium citrate system yields high partition coefficient of 20 with a better yield of 98 % in the top phase. The addition of NaCl as an additive and acidic pH lowers the yield of α-La in the top phase. Influence of phase volume ratio (V _r) on partitioning was studied and found that the partition coefficient remains almost constant along the tie line. High yield was achieved at a V _r of 3.5 at the tie line length of 50.63 (%, w/w).     

Effect of salt additives on protein partition in polyethylene glycol–sodium sulfate aqueous two-phase systems

Partitioning of 15 proteins in polyethylene glycol (PEG)–sodium sulfate aqueous two-phase systems (ATPS) formed by PEG of two different molecular weights, PEG-600 and PEG-8000 in the presence of different buffers at pH 7.4 was studied. The effect of two salt additives (NaCl and NaSCN) on the protein partition behavior was examined. The salt effects on protein partitioning were analyzed by using the Collander solvent regression relationship between the proteins partition coefficients in ATPS with and without salt additives. The results obtained show that the concentration of buffer as well as the presence and concentration of salt additives affects the protein partition behavior. Analysis of ATPS in terms of the differences between the relative hydrophobicity and electrostatic properties of the phases does not explain the protein partition behavior. The differences between protein partitioning in PEG-600–salt and PEG-8000–salt ATPS cannot be explained by the protein size or polymer excluded volume effect. It is suggested that the protein–ion and protein–solvent interactions in the phases of ATPS are primarily important for protein partitioning.     

Genetic engineering of protein-peptide fusions for control of protein partitioning in thermoseparating aqueous two-phase systems

Genetic engineering has been used for the fusion of peptides, with different length and composition, on a protein to study the effect on partitioning in aqueous two-phase systems containing thermoseparating polymers. Peptides containing 2-6 tryptophan residues or tryptophan plus 1-3 lysine or aspartate residues, were fused near the C-terminus of the recombinant protein ZZT0, where Z is a synthetic IgG-binding domain derived from domain B in staphylococcal protein A. The partitioning behavior of the peptides and fusion proteins were studied in an aqueous two-phase system composed of dextran and the thermoseparating ethylene oxide-propylene oxide random copolymer, EO30PO70. The zwitterionic compound beta-alanine was used to reduce the charge-dependent salt effects on partitioning, and to evaluate the contribution to the partition coefficient from the amino acid residues, Trp, Lys, and Asp, respectively. Trp was found to direct the fusion proteins to the EO-PO copolymer phase, while Asp and Lys directed them to the dextran phase. The effect of sodium perchlorate and triethylammonium phosphate on the partitioning of the fusion proteins was also studied. Salt effects were directly proportional to the net charge of the fusion proteins. Sodium perchlorate was found to be 3.5 times more effective in directing positively charged proteins to the EO-PO copolymer phase compared to the effect of triethyl ammonium phosphate on negatively charged proteins. An empirical correlation has been tested where the fusion protein partitioning is a result of independent contributions from unmodified protein, fused peptide, and salt effects. A good agreement with experimental data was obtained which indicates the possibility, by independent measurements of partitioning of target protein and fusion peptide, to approximately predict the fusion protein partitioning.     

Correlations for the partition behavior of proteins in aqueous two-phase systems: effect of overall protein concentration

The effect of protein concentration in partitioning in PEG/salt aqueous two-phase systems has been investigated. PEG 4000/phosphate systems in the presence of 0% w/w and 8.8% w/w NaCl have been evaluated using amyloglucosidase, subtilisin, and trypsin inhibitor. Also, a PEG 4000/phosphate system with 3% w/w NaCl was used for alpha-amylase. The concentration of the protein in each of the phases affected its partition behavior. The pattern for the individual proteins was dependent on their physicochemical properties. In the top phase, maximum protein concentration was determined mainly by a steric exclusion effect of PEG, and hydrophobic interaction between PEG and proteins. In the bottom phase, maximum concentration was determined mainly by a salting-out effect of the salts present. As the ionic strength was increased in the systems the concentration in the top phase increased for all proteins. In the bottom phase an increase in ionic strength increased the salting-out effect. Amyloglucosidase had a very low maximum concentration in the PEG-rich top phase which was probably due to its large size (steric exclusion) and low hydrophobicity, and a high concentration in the salt-rich bottom phase due to its high hydrophilicity. In the case of subtilisin and trypsin inhibitor, their high concentrations in the top phase were due to their hydrophobic nature (hydrophobic interaction with PEG) and small size (negligible steric exclusion). The maximum concentration in the bottom phase for trypsin inhibitor was lower than that of subtilisin which was probably due to its higher hydrophobicity and, hence, a stronger salting-out effect. The protein concentration in each of the two phases was correlated with a "saturation"-type equation. The partition coefficient could be satisfactorily predicted, as a function of the overall protein concentration, by the ratio between the "saturation" equations of the two individual phases. Better correlations were obtained when an empirical sigmoidal Boltzmann equation was fitted to the data, since in virtually all cases the partition coefficient is constant at low protein concentration (true partitioning) and changes to a different constant value at a high overall protein concentration. (c) 1996 John Wiley & Sons, Inc.     

Aqueous two-phase extraction for protein recovery from corn extracts

Corn has been used as an expression host for several recombinant proteins with potential for large-scale production. Cost-effective downstream initial recovery, separation and concentration remain a challenge. Aqueous two-phase (ATP) partitioning has been used to recover and concentrate proteins from fermentation broths and offers advantages for integration of those steps with biomass removal. To examine the applicability of ATP partitioning to recombinant protein purification from corn endosperm and germ, ATP system parameters including poly(ethylene glycol) (PEG) molecular weight (MW), phase-forming salt, tie line length (TLL), and pH were manipulated to control partitioning of extracted native proteins from each fraction. Moderate PEG MW, reduction of phase ratio, and added NaCl effected complete recovery of the hydrophobic model protein lysozyme in the top phase with ca. 5x enrichment and illustrates a favorable match of recombinant protein characteristics, expression host, and separation method. Furthermore, integration of protein extraction with the partitioning reduced the load of contaminating host proteins relative to the more traditional separate steps of extraction followed by partitioning. Performance of the integrated partitioning was hindered by endosperm solids loading, whereas for germ, which has ca. 35x higher aqueous soluble protein, the limit was protein solubility. For more hydrophilic model proteins (the model being cytochrome c), effective separation required further reduction of PEG MW to effect more partitioning of host proteins to the top phase and enrichment of the model protein in the lower phase. The combination of PEG MW of 1450 with 8.5 wt.% NaCl addition (Na(2)SO(4) as the phase-forming salt) provided for complete recovery of cytochrome c in the lower phase with enrichment of 9x (germ) and 5x (endosperm). As a result of lower-phase recovery, the advantage of simultaneous removal of solids is lost. The lower solubility of native endosperm proteins results in higher purity for the same enrichment.     

Correlation for the partition behavior of proteins in aqueous two-phase systems: effect of surface hydrophobicity and charge

Correlations to describe the effect of surface hydrophobicity and charge of proteins with their partition coefficient in aqueous two-phase systems were investigated. Polyethylene glycol (PEG) 4000/phosphate, sulfate, citrate, and dextran systems in the presence of low (0.6% w/w) and high (8.8% w/w) levels of NaCl were selected for a systematic study of 12 proteins. The surface hydrophobicity of the proteins was measured by ammonium sulfate precipitation as the inverse of their solubility. The hydrophobicity values measured correlated well with the partition coefficients, K, obtained in the PEG/salt systems at high concentration of NaCl (r = 0.92-0.93). In PEG/citrate systems the partition coefficient correlated well with protein hydrophobicity at low and high concentrations of NaCl (r = 0.81 and 0.93, respectively). The PEG/citrate system also had a higher hydrophobic resolution than other systems to exploit differences in the protein's hydrophobicity. The surface charge and charge density of the proteins was determined over a range of pH (3-9) by electrophoretic titration curves; PEG/salt systems did not discriminate well between proteins of different charge or charge density. In the absence of NaCl, K decreased slightly with increased positive charge. At high NaCl concentration, K increased as a function of positive charge. This suggested that the PEG-rich top phase became more negative as the concentration of NaCl in the systems increased and, therefore, attracted the positively charged proteins. The effect of charge was more important in PEG/dextran systems at low concentrations of NaCl. In the PEG/dextran systems at lower concentration of NaCl, molecular weight appeared to be the prime determinant of partition, whereas no clear effect of molecular weight could be found in PEG/salt systems.     

Optimization of bovine serum albumin sorption and recovery by hydrogels

Aqueous two-phase systems are composed of aqueous solutions of either two water-soluble polymers, usually polyethylene glycol (PEG) and dextran (Dx), or a polymer and a salt, usually PEG and phosphate or sulfate. Partitioning of proteins in such systems provides a powerful method for separating and purifying mixtures of biomolecules by extraction. If one of the phase forming polymers is a crosslinked gel, then the solution-controlled gel sorption may be considered as a modification of aqueous two-phase extraction. Since PEG/dextran systems are widely used in aqueous two-phase extraction and dextran gels (Sephadex) are common chromatographic media, we choose a PEG/dextran gel system as a model system in this study. The partitioning behavior of pure bovine serum albumin (BSA) in PEG/dextran gel systems is investigated to see the effects of variations in PEG and NaCl concentrations on the partition coefficient K. By making use of the Box-Wilson experimental design, K is shown to be maximized at 9.8 (%, w/w) PEG and 0.2 M NaCl concentrations, respectively, as 182.     

Aqueous micellar two-phase system composed of hyamine-type hydrophobically modified ethylene oxide and application for cytochrome P450 BM-3 separation

The hydrophobically modified ethylene oxide polymer, HM-EO, was modified with an alkyl halide to prepare a hyamine-type HM-EO, named N-Me-HM-EO, which could be used for forming N-Me-HM-EO/buffer aqueous micellar two-phase system. The critical micelle concentration of N-Me-HM-EO solution and the phase diagrams of N-Me-HM-EO/buffer systems were determined. By using this novel aqueous micellar two-phase system, the separation of cytochrome P450 BM-3 from cell extract was explored. The partitioning behavior of P450 BM-3 in N-Me-HM-EO/buffer systems was measured. The influences of some factors such as total proteins concentration, pH, temperature and salt concentration, on the partitioning coefficients of P450 BM-3 were investigated. Since the micellar aggregates in the N-Me-HM-EO enriched phase were positively charged, it was possible to conduct the proteins with different charges to top or bottom phases by adjusting pH and salt concentration in the system. A separation scheme consisting of two consecutive aqueous two-phase extraction steps was proposed: the first extraction with N-Me-HM-EO/buffer system at pH 8.0, and the second extraction in the same system at pH 6.0. The recovery of P450 BM-3 was 73.3% with the purification factor of 2.5. The results indicated that the aqueous micellar two-phase system composed of hyamine modified polysoap has a promising application for selective separation of biomolecules depending on the enhanced electrostatic interactions between micelles and proteins.     

Protein sorption and recovery by hydrogels using principles of aqueous two-phase extraction

Use of the thermodynamic principles of aqueous two-phase extraction (ATPE) to drive protein into a crosslinked gel is developed as a protein isolation and separation technique, and as a protein loading technique for drug delivery applications. A PEG/dextran gel system was chosen as a model system because PEG/dextran systems are widely used in aqueous two-phase extraction and dextran gels (Sephadex(R)) are common chromatographic media. The effects of polymer concentrations and molecular weights, salts, and pH on the partitioning of ovalbumin matched ATPE heuristics and data trends. Gel partition coefficients (Cgel/Csolution) increased with increasing PEG molecular weight and concentration and decreasing dextran concentration (increased gel swelling). The addition of PEG to the buffer solution yielded partition coefficients more than an order of magnitude greater than those obtained in systems with buffer alone, or added salt. A combined salt/PEG system yielded an additional order of magnitude increase. For example, when ovalbumin solution (2.3 mg/mL) was equilibrated with Sephadex(R) G-50 at pH 6.75, the partition coefficients were 0.13 in buffer, 0.11 in buffer with 0.22M KI, 2.3 in 12 wt% PEG-10,000 and 32.0 in 12 wt% PEG-10, 000 with 0.22M KI. The effect of anions and cations as well as ionic strength and pH on the partitioning of ovalbumin also matched ATPE heuristics. Using the heuristics established above, partition coefficients as high as 80 for bovine serum albumin and protein recoveries over 90% were achieved. In addition, the wide range of partition coefficients that were obtained for different proteins suggests the potential of the technique for separating proteins. Also, ovalbumin sorption capacities in dextran were as high as 450 mg/g dry polymer, and the sorption isotherms were linear over a broad protein concentration range.     

Extraction of cephalosporin C from whole broth and separation of desacetyl cephalosporin C by aqueous two-phase partition

Cephalosporin C was extracted from diluted or whole broth by PEG/salt aqueous two-phase systems. Parameters such as PEG molecular weight, salt type, pH, and salt concentration were investigated for finding a suitable extraction system. In PEG 600/ammonium sulfate or phosphate systems, K(c) (partition coefficienct of cephalosporin C) was observed to be larger than 1, with K(d) (partition coefficient of desacetyl cephalosporin C) being smaller than 1. The particular values of these coefficients would imply that the difficult separation of cephalosporin C and desacetyl cephalosporin C could possibly be achieved via the aqueous two-phase extraction. The addition of surfactants, water-miscible solvents, and neutral salts for enhancement of the separation efficiency was also investigated. The addition of surfactants to the system did not affect the separation efficiency substantially. K(c) would increase whereas K(d) decreased as a result of the addition of acetone, MeOH, EtOH, IPA, and n-BuOH. Meanwhile both K(c) and K(d) would decrease whenever neutral salts, NaCl, KCl, Kl, or KSCN, were added. The partitioning behavior of cephalosporin C and desacetyl cephalosporin C in filtered, whole, and different batches of broth was notably quite similar to that of diluted broth. The recovery yield of cephalosporin C in whole broth extraction was observed to be a function of centrifugal force used in phase separation. (c) 1994 John Wiley & Sons, Inc.     

Protein partitioning in weakly charged polymer-surfactant aqueous two-phase systems

The study includes partitioning of proteins in aqueous two-phase systems consisting of the polymer dextran and the non-ionic surfactant C₁₂E₅ (pentaethylene glycol mono-n-dodecyl ether). In this system a micelle-enriched phase is in equilibrium with a polymer-enriched phase. Charges can be introduced into the micelles by the addition of charged surfactants. The charge of the mixed micelles is easily varied in sign and magnitude independently of pH, by the addition of different amounts of negatively charged surfactant, sodium dodecyl sulphate (SDS), or positively charged surfactant dodecyl trimethyl ammonium chloride (DoTAC). A series of water-soluble model proteins (BSA, β-lactoglobulin, myoglobin, cytochrome c and lysozyme), with different net charges at pH 7.1, have been partitioned in non-charged systems and in systems with charged mixed micelles or charged polymer (dextran sulphate). It is shown that partition coefficients for charged proteins in dextran-C₁₂E₅ systems can be strongly affected by addition of charged surfactants (SDS, DoTAC) or polymer (dextran sulphate) and that the effects are directly correlated to protein net charge.     

Partitioning features of bovine trypsin and alpha-chymotrypsin in polyethyleneglycol-sodium citrate aqueous two-phase systems

The partitioning of bovine trypsin and alpha-chymotrypsin--proteases of similar physico-chemical properties--in different polyethyleneglycol/sodium citrate aqueous two-phase systems was investigated. The effect of different factors such as polyethyleneglycol molecular weight, pH, tie line length, temperature and the presence of an inorganic salt on the protein partition coefficient were analysed. Both a decrease in PEG molecular weight and an increase in pH led to a higher partition coefficient for both enzymes. Aqueous two-phase systems formed by PEG of molecular weight 3350 and citrate pH 5.2 showed the best separation capability which was enhanced in presence of sodium chloride 3%. The transfer of both proteins to the top phase was associated with negative enthalpic and entropic changes.     

Partitioning of glycomacropeptide in aqueous two-phase systems

The partition behavior of glycomacropeptide (GMP) was determined in polyethylene glycol (PEG) and sodium citrate aqueous two-phase systems (ATPS). It was found that the partitioning of GMP depends on PEG molar mass, tie line length, pH, NaCl concentration and temperature. The obtained data indicates that GMP is preferentially partitioned into the PEG phase without addition of NaCl at pH 8.0. Larger tie line lengths and higher temperatures favor GMP partition to the PEG phase. Furthermore, it was verified that PEG molar mass and concentration have a slight effect on GMP partition. The increase in the molar mass of PEG induces a reduction of the protein solubility in the top PEG rich phase, being shown that the use of PEG1500 is beneficial for the extraction of GMP. A protein recovery higher than 85% was obtained in the top phase of these systems, clearly demonstrating its suitability as a starting point for the separation of GMP.