Arundo donax L. reed: new perspectives for pulping and bleaching. 5. Ozone-based TCF bleaching of organosolv pulps

Three selected alkali-based organosolv pulps (alkali-sulfite-anthraquinone-methanol (ASAM), alkali-anthraquinone-methanol (organocell) and ethanol-soda) from agrofibre crop giant reed (Arundo donax L.) were bleached by an ozone-based TCF (totally chlorine- free) bleaching sequence AZE(R)QP (where A is an acidic pulp pre-treatment, Z is an ozone stage, (E(R)) is an alkaline extraction in the presence of reducing agent, Q is a pulp chelating, P is a hydrogen peroxide stage) without oxygen pre-bleaching, and compared with a conventional kraft pulp used as a reference. The different response on bleaching conditions within each bleaching stage was noted for all tested pulps. The pulp bleachability, in terms of brightness improvement or lignin removal per unit of applied chemicals, was found higher for the organocell pulp. The ASAM and ethanol-soda pulps showed the highest bleaching selectivity, expressed by viscosity loss per unit of lignin removed or brightness improved. The overall bleaching results of organosolv pulps were superior to kraft.     

Bleach boosting and direct brightening by multiple xylanase treatments during peroxide bleaching of kraft pulps

The effects of multiple xylanase treatments were assessed during the peroxide bleaching of three pulps: Douglas-fir (kraft); Western hemlock (oxygen delignified kraft); and trembling Aspen (kraft). The addition of a xylanase treatment stage, either before or after the peroxide bleaching stage(s), resulted in the enhanced brightening of all pulps. A higher brightness was achieved using two enzyme treatments, one before and one after the peroxide stage(s). Both bleach boosting and direct brightening seemed to contribute to the enhancement of the peroxide bleaching. Compared to xylanase prebleaching, xylanase posttreatment of peroxide bleached pulps solubilized less lignin and chromophores and made smaller amounts of these materials alkaline soluble. Nevertheless, the final brightness achieved by xylanase posttreatment was similar or superior to that achieved with xylanase prebleaching of the corresponding unbleached pulps. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 54: 312-318, 1997.     

Xylanases in bleaching: From an idea to the industry

Abstract: The utilization of hemicellulases in bleaching of kraft (sulphate) pulp is considered as one of the most important new large-scale industrial applications of enzymes. This is partly due to the great potential of an environmentally safe method. This method has in a short period also proven to be economically realistic. The main enzymes needed in the enzyme-aided bleaching have been shown to belong to the group of endo-/gb-xylanases. Xylanases act mainly on the relocated, reprecipitated xylan on the surface of the pulp fibres. Enzymatic hydrolysis of this specific type of xylan renders the structure of the fibres more permeable. The hydrolysis of xylan or mannan in the inner fibre layers may also enhance the bleachability. In practical process conditions, properties of the enzymes such as substrate specificity and the pH and temperature optima are of utmost importance. The benefits obtained by enzymes are dependent on the chemical bleaching sequence used as well as on the residual lignin content of pulp. The main goals in the enzyme-aided bleaching of kraft pulps have been the reduction of consumption of chlorine chemicals in the bleaching process and consequently lowering the AOX of the effluents. Enzymes have been applied as a pretreatment both in conventional (C/D)EDED and in ECF (elementary chlorine-free) bleaching sequences. In the production of TCF (totally chlorine-free) pulps, enzymes have also been successfully used for increasing the brightness of pulp.     

Comparison of different fungal enzymes for bleaching high-quality paper pulps

Wild and recombinant hydrolases and oxidoreductases with a potential interest for environmentally sound bleaching of high-quality paper pulp (from flax) were incorporated into a totally chlorine free (TCF) sequence that also included a peroxide stage. The ability of feruloyl esterase (from Aspergillus niger) and Mn2+-oxidizing peroxidases (from Phanerochaete chrysosporium and Pleurotus eryngii) to decrease the final lignin content of flax pulp was shown. Laccase from Pycnoporus cinnabarinus (without mediator) also caused a slight improvement of pulp brightness that was increased in the presence of aryl-alcohol oxidase. However, the best results were obtained when the laccase treatment was performed in the presence of a mediator, 1-hydroxybenzotriazol (HBT), enabling strong delignification of pulps. The enzymatic removal of lignin resulted in high-final brightness values that are difficult to attain by chemical bleaching of this type of pulp. A partial inactivation of laccase by HBT was observed but this negative effect was strongly reduced in the presence of pulp. The good results obtained with the same laccase expressed in A. niger at bioreactor scale, revealed the feasibility of using recombinant laccase for bleaching high-quality non-wood pulps in the presence of a mediator.     

Changes in the structural composition of hardwood kraft pulp during bleaching

The possibility of using xylanase preparations for hydrolyzing hemicelluloses in a non-bleached kraft pulp in order to facilitate its bleaching was studied. The effects of enzymatic preparations of fungal and bacterial origins were examined, and the optimal conditions for xylanase activity were determined. UV spectroscopy demonstrated that the treatment of kraft pulp with enzymatic preparations containing xylanase facilitated the subsequent removal of lignin and increased the brightness by 5%. The effect of enzymatic treatment was retained in the case of peroxide bleaching. The enzymatic preparations studied are promising for the development of chlorine-free pulp bleaching technologies.     

Biological bleaching of chemical pulps

Use of biotechnology in pulp bleaching has attracted considerable attention and achieved interesting results in recent years. Enzymes of the hemicellulolytic type, particularly xylan-attacking enzymes, xylanases are now used commercially in the mills for pulp treatment and subsequent incorporation into bleach sequences. The aims of the enzymatic treatment depend on the actual mill conditions and may be related to environmental demands, reduction of chemical costs or maintenance or even improvement of product quality. The use of oxidative enzymes from white-rot fungi, that can directly attack lignin, is a second-generation approach, which could produce larger chemical savings than xylanase but has not yet been developed to the full scale. It is being studied in several laboratories in Canada, Japan, the U.S.A. and Europe. Certain white-rot fungi can delignify kraft pulps increasing their brightness and their responsiveness to brightening with chemicals. The fungal treatments are too slow but the enzyme manganese peroxidase and laccase can also delignify pulps and enzymatic processes are likely to be easier to optimize and apply than the fungal treatments. Development work on laccase and manganese peroxidase continues. This article presents an overview of developments in the application of hemicellulase enzymes, lignin-oxidizing enzymes and white-rot fungi in bleaching of chemical pulps. The basic enzymology involved and the present knowledge of the mechanisms of the action of enzymes as well as the practical results and advantages obtained on the laboratory and industrial scale are discussed.     

Xylanase-induced reduction of chlorine dioxide consumption during elemental chlorine-free bleaching of different pulp types

The potential of crude xylanase from Thermomyces lanuginosus and Xylanase P (a commercial xylanase) was evaluated in bleaching of various paper pulp types. Xylanases released chromophores and reducing sugars and decreased kappa number of pulps. Chlorine-bleached, alkali-extracted bagasse and post-oxygen kraft pulps, pretreated with enzymes, gained over 5 brightness points over controls. Biobleaching of soda-aq pulp with Xylanase P produced chlorine dioxide savings of up to 30% or 4.5 kg chlorine dioxide t^–1 pulp.     

Change in composition of structural components of leaf cellulose sulfate during fermentation bleaching by xylanases

The possibility of the use of xylanase preparations for hydrolysing hemicelluloses in a non-bleached kraft pulp in order to facilitate its bleaching was studied. The effects of enzymatic preparations of the fungal and bacterial origins were examined, and the optimal conditions for xylanase activity were determined. UV spectroscopy demonstrated that the treatment of kraft pulp with the enzymatic preparations containing xylanase facilitated the subsequent removal of lignin and increased the brightness by 5%. The effect of enzymatic treatment was retained in the case of peroxide bleaching. The enzymatic preparations studied are promising for the development of chlorine-free pulp bleaching technologies.     

Trichoderma reesei cellulases in the bleaching of kraft pulp

In this work the effects of individual purified cellulases of Trichoderma reesei were studied in the enzyme-aided bleaching of kraft pulps. The cellobiohydrolases I and II, when used alone, had no positive effect on the bleachability of kraft pulps. The endoglucanase I (EG I), however, acted on pulp similarly to xylanases and with an enzyme dosage of 0.1 mg/g a clear increase in pulp brightness could be observed. Due to the unspecificity of this enzyme, the viscosity of the pulp was simultaneously decreased. Of the cellulases, EG II was clearly most detrimental in reducing the pulp viscosity. Hence, the action of purified cellulases of T. reesei on pulp as a substrate differs profoundly, and all cellulases are not detrimental to the pulp properties. Correspondence to: J. Buchert     

Positive and negative aspects of soda/anthraquinone pulping of hardwoods

The positive aspects of the non-sulfur soda/anthraquinone (SAQ) process are mostly tied to improved energy efficiency while lower pulp brightness after bleaching is its most significant drawback. A credible method that quantifies bleachability as well as an approach that solves the problem for SAQ pulps from hardwoods will be described. A straight line correlation (R2=0.904) was obtained between O2 kappa number and final light absorption coefficient (LAC) value after standardized OD0EpD1 bleaching of nine hardwood kraft pulps from three laboratories and one pulp mill. The bleachability of pulps from four different soda processes catalyzed by anthraquinone (AQ) and 2-methylanthraquinone (MAQ) was compared to that of conventional kraft pulps by comparing O2 kappa number decrease and final LAC values. It was observed that a mild hot water pre-hydrolysis improved the bleachability of SAQ pulps to a level equal to that of kraft.     

Impact of hexenuronic acids on xylanase-aided bio-bleaching of chemical pulps

Hexenuronic acids (HexA) of hemicellulosic heteroxylan were shown to play important role in brightness development of chemical pulps during xylanase-aided bio-bleaching. Industrial wood (eucalypt) kraft pulp and a few non-wood (giant reed) organosolv pulps were pre-treated with commercial xylanase preparations (endo-1,4-β-xylanase activity; EC 3.2.1.8) and bleached by simplified bleaching sequence. The HexA performance was examined and compared with control (enzyme-free) samples. The xylanase-assisted direct brightening effect, noted immediately after an enzymatic stage, was proved to be caused by exclusive HexA removal with solubilized HexA-carrying xylooligosaccharide fractions. Aldohexa- and aldopentahexenuronic acids (Xyl₅-HexA and Xyl₄-HexA) were found as predominant oligosaccharides, accounting for up to 65% of total acidic oligomers in enzymatic hydrolyzates. A strong positive correlation (R² = 0.91) was established between further brightness improvement of xylanase-treated pulps during subsequent chemical bleaching (bleach boosting) and the content of HexA. This underlined the role of HexA as one of the key factors in definition of final brightness of bio-bleached pulps, determining to a large extent the bleaching efficiency of xylanase application as a whole.     

Mutagenic properties of spent bleaching liquors from sulphite pulps and a comparison with kraft pulp bleaching liquors

Parameters influencing the mutagenic properties of spent bleaching liquors from sulphite pulps have been studied. In addition a comparison has been made between the properties of spent liquors from sulphite and kraft pulp bleaching. In the sulphite process the cooking base had no influence on the mutagenicity of the chlorination stage. In contrast, removing the extractives before chlorination especially for dissolving pulp resulted in an increase in mutagenic activity. The mutagenicity decreased significantly after substituting 40% of the chlorine with chlorine dioxide. Sequential addition of chlorine and chlorine dioxide resulted in higher activity than simultaneous or premixed chlorination as observed for liquors from kraft pulp. Increasing the pH of the extracts or addition of sulphur dioxide decreased the mutagenicity. Expressed as 10(7) revertants per kappa number and ton pulp the mutagenicity varied between 10 and 40 for sulphite pulp while the corresponding figures for kraft pulp were 100-225.     

Kraft Pulp Bleaching and Delignification by Dikaryons and Monokaryons of Trametes versicolor

The ability of 10 dikaryotic and 20 monokaryotic strains of Trametes (Coriolus) versicolor to bleach and delignify hardwood and softwood kraft pulps was assessed. A dikaryon (52P) and two of its mating-compatible monokaryons (52J and 52D) derived via protoplasting were compared. All three regularly bleached hardwood kraft pulp more than 20 brightness points (International Standards Organization) in 5 days and softwood kraft pulp the same amount in 12 days. Delignification (kappa number reduction) by the dikaryon and the monokaryons was similar, but the growth of the monokaryons was slower. Insoluble dark pigments were commonly found in the mycelium, medium, and pulp of the dikaryon only. Laccase and manganese peroxidase (MnP) but not lignin peroxidase activities were secreted during bleaching by all three strains. Their laccase and MnP isozyme patterns were compared on native gels. No segregation of isozyme bands between the monokaryons was found. Hardwood kraft pulp appeared to adsorb several laccase isozyme bands. One MnP isozyme (pI, 3.2) was secreted in the presence of pulp by all three strains, but a second (pI, 4.9) was produced only by 52P. A lower level of soluble MnP activity in one monokaryon (52D) was associated with reduced bleaching ability and a lower level of methanol production. Since monokaryon 52J bleached pulp better than its parent dikaryon 52P, especially per unit of biomass, this genetically simpler monokaryon will be the preferred subject for further genetic manipulation and improvement of fungal pulp biological bleaching.     

Investigation of hydroxamic acids as laccase-mediators for pulp bleaching

A number of hydroxamic acids have been synthesized and investigated as laccase-mediators for pulp bleaching. As compared with N-hydroxyacetanilide (NHA), one of the most effective laccase-mediators reported so far, N-(4-cyanophenyl)acetohydroxamic acid (NCPA), resulted in the highest brightness and lowest kappa number of hardwood kraft pulp of all the laccase-mediators studied. The bleaching efficacy of a laccase/7-cyano-4-hydroxy-2H-1,4-benzoxazin-3-one system was also comparable with that of a laccase/NHA system. A laccase/NCPA system was further studied for the bleaching of unbleached softwood kraft pulp. The effects of pulp consistency, laccase dosage, NCPA dosage, incubation time, and oxygen pressure on the bleaching efficacy of a laccase/NCPA system were studied.     

Prebleaching of kraft pulp with full-length and truncated forms of a thermostable modular xylanase from Rhodothermus marinus

Full-length and truncated forms of a modular thermostable xylanase (EC 3.2.1.8., glycoside hydrolase family 10) were used in bleaching sequences of hardwood and softwood kraft pulps. Enzymatic treatment led to brightness gains of all pulps but the result depended on the pulp source. The presence of the additional domains in the full-length enzyme (including carbohydrate-binding modules) did not improve the bleaching process. No significant change in viscosity was seen after enzyme treatments indicating an unaffected pulp fibre length.     

Biokraft pulping of European black pine with Ceriporiopsis subvermispora

European black pine (Pinus nigra Arn.) chips were treated with the white-rot fungus Ceriporiopsis subvermispora for periods ranging from 20 to 100 days. The effects of pretreatment on the chemical composition of wood and kraft pulping were investigated. The results showed that fungal pretreatment reduced the lignin and extractive content of wood chips. Also, weight losses occurred. Kappa number, viscosity, and reject ratio of biokraft pulps decreased. Biokraft pulps gave better response to beating, which led to significant energy saving during refining. The tear index, burst index, and tensile index of biokraft pulps were found to be lower than those of kraft pulps. However, the tensile index and burst index of 20-day biotreated and unbeaten pulp was higher than those of kraft pulp. Also, the tear index of 20-day biotreated and beaten pulp was higher than that of kraft pulp. The brightness of biokraft pulps decreased irregularly with increasing incubation time.     

Relationship between Fungal Biomass Production and the Brightening of Hardwood Kraft Pulp by Coriolus versicolor

The white-rot fungus Coriolus versicolor increased the brightness of hardwood kraft pulp by two mechanisms depending on the concentration of available nitrogen. In low-nitrogen conditions, the brightening process was a chemical effect mediated by the fungus, associated with the removal of residual lignin in the pulp; kappa number was used as an indicator of lignin concentration. A five-day treatment in low-nitrogen conditions increased the brightness of hardwood kraft pulp from 36.2 to 54.5%, with a corresponding decrease in kappa number from 12.0 to 8.5, equivalent to a reduction in the lignin concentration from ca. 2.0% (wt/wt) to ca. 1.4% (wt/wt). Under these conditions, we concluded that the brightening of the pulp was a secondary metabolic event initiated after the depletion of available nitrogen. This method of brightening has been described as bleaching or biobleaching. By contrast, in high-nitrogen conditions, the brightening was a physical effect associated with the dilution of the dark pulp fibers by the relatively high levels of brighter fungal mycelium produced. Since this method of brightening was not evidently associated with lignin removal, it cannot be described as bleaching. In pulp samples brightened in high-nitrogen conditions, as brightness increased, there was a corresponding increase in kappa number. This observation was explained by the consumption of potassium permanganate by the fungal mycelium, which interfered with kappa number determinations at high fungal biomass levels.     

The performance of fungal xylan-degrading enzyme preparations in elemental chlorine-free bleaching for Eucalyptus pulp

Cellulase-free xylan-degrading enzyme preparations from Acrophialophora nainiana, Humicola grisea var. thermoidea and two Trichoderma harzianum strains were used as bleaching agents for Eucalyptus kraft pulp, prior to a chlorine dioxide and alkaline bleaching sequence. In comparison to the control sequence (performed without xylanase pretreatment), the sequence incorporating enzyme treatment was more effective. Removal of residual lignin was indicated by a reduction in kappa number. Overall, enzyme preparations from T. harzianum were marginally more effective in reducing pulp viscosity and chlorine chemical consumption and improving the brightness of the kraft pulp. However, the highest reduction in pulp viscosity was mediated by the xylanase preparation from A. nainiana. Xylanase pretreatment compares very favorably with that of chemical pulping. Journal of Industrial Microbiology & Biotechnology (2002) 28, 204–206 DOI: 10.1038/sj/jim/7000227 Received 27 April 2001/ Accepted in revised form 03 November 2001     

Microscopy studies reveal delignification and sterol removal from eucalypt kraft pulps by laccase-HBT

Fungal laccases in the presence of mediators are powerful biocatalysts to degrade lignin. Pycnoporus cinnabarinus laccase and 1-hydroxybenzotriazole (HBT) have been successfully used to delignify eucalypt kraft pulp once integrated in a totally chlorine-free bleaching sequence. Real time delignification of kraft pulp by laccase-HBT was verified in situ by monitoring the loss of lignin autofluorescence during the enzymatic treatment using confocal laser scanning microscopy. The highest delignification of pulp fibers occurred over a very short time-span (5 min). Moreover, we demonstrate the removal of sterols, responsible for pitch deposits in hardwood kraft pulps, as an additional effect of laccase-HBT. Spherical structures between pulp fibers localized by low temperature scanning electron microscopy were removed by laccase-HBT. The use of filipin, a specific stain, revealed the sterol nature of many of these structures. At the end of the enzyme-aided bleaching sequence, the fluorescent sterols-filipin signals were almost completely absent.     

Bleaching of Hardwood Kraft Pulp with Manganese Peroxidase Secreted from Phanerochaete sordida YK-624

In vitro bleaching of an unbleached hardwood kraft pulp was performed with manganese peroxidase (MnP) from the fungus Phanerochaete sordida YK-624. When the kraft pulp was treated with partially purified MnP in the presence of MnSO₄, Tween 80, and sodium malonate with continuous addition of H₂O₂ at 37°C for 24 h, the pulp brightness increased by about 10 points and the kappa number decreased by about 6 points compared with untreated pulp. The pulp brightness was also increased by 43 points to 75.5% by multiple (six) treatments with MnP combined with alkaline extraction. Our results indicate that in vitro degradation of residual lignin in hardwood kraft pulp with MnP is possible.