Lethality of rep recB and rep recC double mutants of Escherichia coli

A rep mutation in combination with a recB or a recC mutation renders Escherichia coli non-viable. This conclusion is based on the following lines of evidence: (i) double mutants cannot be constructed by P1 transduction; (ii) induction of the λ Gam protein, which inactivates most of the RecBCD activities, is lethal in rep mutants; (iii) rep recBts recCts mutants are not viable at high temperature. The reasons for a requirement for the RecBCD enzyme in rep strains were investigated. Initiation of chromosome replication, elongation and chromosomal segregation do not seem impaired in the rep recBts recCts mutant at the non-permissive temperature. The viability of other rep derivatives was tested. rep recA recD triple mutants are not viable, whereas rep recD and rep recA double mutants are. Inactivation of both exoV activity and recBC -dependent homologous recombination is therefore responsible for the non-viability of rep recBC strains. However, sbcA and sbcB mutations, which render recBC mutants recombination proficient, do not restore viability of rep recBC mutants, indicating that recombination via the RecF or the RecE pathways cannot functionally replace RecBCD-mediated recombination. The specific requirement for RecBCD suggests the occurrence of double-strand DNA breaks in rep strains. Additional arguments in favour of the presence of DNA lesions in rep mutants are as follows: (i) expression of SOS repair functions delays lethality of rep derivatives after inactivation of RecBCD; (ii) sensitivity of rep strains to ultraviolet light is increased by partial inactivation of RecBCD. A model for the recovery of cells from double-strand breaks in rep mutants is discussed.     

The rep mutation. VI. Purification and properties of the Escherichia coli rep protein, DNA helicase III.

The protein product of the rep gene of Escherichia coli is required for the replication of certain bacteriophage genomes (phi X174, fd, P2) and for the normal replication of E. coli DNA. We have used a specialized transducing phage, lambda p rep+, which complements the defect of rep mutants, to identify the rep protein. The rep protein has been purified from cells infected with lambda p rep+ phage; it has a molecular weight of about 70 000 and appears similar to the protein found in normal cells. Stimulation of phi X174 replicative form DNA synthesis in vitro was observed when highly purified rep protein was supplied to a cell extract derived from phi X-infected E. coli rep cells and supplemented with replicative form DNA. The purified protein has a single-stranded DNA-dependent ATPase activity and is capable of sensitizing duplex DNA to nucleases specific for single-stranded DNA. For this reason we propose the enzyme be called DNA helicase III. We infer that the rep protein uses the energy of hydrolysis of ATP to separate the strands of duplex DNA; the E. coli DNA binding protein need not be present. The rep3 mutant appeared to make a limited amount of active rep protein.     

Adeno-associated virus rep protein synthesis during productive infection.

Adeno-associated virus (AAV) Rep proteins mediate viral DNA replication and can regulate expression from AAV genes. We studied the kinetics of synthesis of the four Rep proteins, Rep78, Rep68, Rep52, and Rep40, during infection of human 293 or KB cells with AAV and helper adenovirus by in vivo labeling with [35S]methionine, immunoprecipitation, and immunoblotting analyses. Rep78 and Rep52 were readily detected concomitantly with detection of viral monomer duplex DNA replicating about 10 to 12 h after infection, and Rep68 and Rep40 were detected 2 h later. Rep78 and Rep52 were more abundant than Rep68 and Rep40 owing to a higher synthesis rate throughout the infectious cycle. In some experiments, very low levels of Rep78 could be detected as early as 4 h after infection. The synthesis rates of Rep proteins were maximal between 14 and 24 h and then decreased later after infection. Isotopic pulse-chase experiments showed that each of the Rep proteins was synthesized independently and was stable for at least 15 h. A slower-migrating, modified form of Rep78 was identified late after infection. AAV capsid protein synthesis was detected at 10 to 12 h after infection and also exhibited synthesis kinetics similar to those of the Rep proteins. AAV DNA replication showed at least two clearly defined stages. Bulk duplex replicating DNA accumulation began around 10 to 12 h and reached a maximum level at about 20 h when Rep and capsid protein synthesis was maximal. Progeny single-stranded DNA accumulation began about 12 to 13 h, but most of this DNA accumulated after 24 h when Rep and capsid protein synthesis had decreased.     

Location of rep and inc sequences in the F secondary replicon

Miniplasmids derived by deletion of DNA from the F plasmid secondary replicon have been tested for the ability to replicate and to express incompatibility with the IncFI plasmid, ColV3-K30. The results demonstrate that the minimal rep region of the secondary replicon lies within a 1.9-kb sequence (33.7F-35.6F kb), and that an inc region, presumably involved in replication control, is present in a 0.45-kb portion of the rep region (33.7F-34.15F kb). In addition, the secondary replicon was found not to require DNA polymerase I activity.     

Nucleotide sequence of the rep gene of staphylococcal plasmid pCW7

Previous heteroduplex mapping studies showed that staphylococcal plasmid pCW7 belongs to the pT181 family of small antibiotic resistance plasmids which replicate by a rolling-circle mechanism. Replication in each case is initiated at the plasmid origin (ori) by a plasmid-encoded protein. Rep, which makes a sequence-specific single-stranded nick to form a covalent Rep-ori replication intermediate. A comparison of sequencing results for the repN gene of pCW7 with data for the products of five other homologous rep genes allows a prediction to be made of the segments of the primary structure of Rep which are likely to be responsible for plasmid-specific recognition of the ori region by each Rep protein.     

用rep—PCR技术研究中国花生根瘤菌的多样性

采用细菌基因组重复序列ＰＣＲ技术（简称ｒｅｐＰＣＲ）中常用的ＲＥＰＰＣＲ和ＥＲＩＣＰＣＲ,对从中国１１个省、市的２３个点、２４个花生品种采集的根瘤中分离的５９株花生根瘤菌Ｂｒａｄｙｒｈｉｚｏｂｉｕｍｓｐ．（Ａｒａｃｈｉｓ）进行多样性研究,同时对来自国外的６株花生根瘤菌及１４株参比慢生根瘤菌也进行了比较。得到的低相似性结果表明中国花生根瘤菌基因组存在显著的多样性。ＲＥＰＰＣＲ揭示,在相似性５０％上分为１１个群,而ＥＲＩＣＰＣＲ却得到２４个分群。这两种结果对菌株的分群有差异,暗示这两种短重复序列在慢生根瘤菌基因组中的分布的不同。没有发现菌株间基因组的多样性分布与花生品种、地理来源之间的必然联系。将两者电泳图谱结合并分析,得到介于上述两者间的结果。此结果进一步反映了菌株基因组间存在的多样性。同时还表明ｒｅｐＰＣＲ不仅是研究生物多样性的快速简便方法,还可应用于菌株的鉴别和生态学研究。     

The Nucleotide Sequence of the rep Gene of Cyanobacterial Plasmid pSM1

The nucleotide sequence was established for the rep gene of plasmid pSM1 isolated from cyanobacteriumPlectonema boryanum CALU 465. Both nucleotide sequence and the encoded amino acid sequences showed 98% homology to the corresponding sequences of small plasmids pPF1, pGL3, pPBS1, pBLX, and pPB1. An active center was identified in the replicative protein sequences.     

The adeno-associated virus rep gene suppresses herpes simplex virus-induced DNA amplification.

Herpes simplex virus (HSV) induces within the host cell genome DNA amplification which can be suppressed by coinfection with adeno-associated virus (AAV). To characterize the AAV functions mediating this effect, cloned AAV type 2 wild-type or mutant genomes were transfected into simian virus 40 (SV40)-transformed hamster cells together with the six HSV replication genes (encoding UL5, UL8, major DNA-binding protein, DNA polymerase, UL42, and UL52) which together are necessary and sufficient for the induction of SV40 DNA amplification (R. Heilbronn and H. zur Hausen, J. Virol. 63:3683-3692, 1989). The AAV rep gene was identified as being responsible for the complete inhibition of HSV-induced SV40 DNA amplification. Likewise, rep inhibited origin-dependent HSV replication. rep neither killed the transfected host cells nor interfered with gene expression from the cotransfected amplification genes. This points to a specific interference with HSV-induced DNA amplification.     

The nucleotide sequence of the rep gene of cyanobacterial plasmid pSM1

The nucleotide sequence was established for the rep gene of plasmid pSM1 isolated from cyanobacterium Plectonema boryanum CALU 465. Both nucleotide sequence and the encoded amino acid sequences showed 98% homology to the corresponding sequences of small plasmids pPF1, pGL3, pPBS1, pBLX, and pPB1. An active center was identified in the replicative protein sequences.     

The rep region of pR plasmid regulates the expression of SOS system

Summary By using an artificial hybrid between phage and the pR plasmid, we have shown that the rep region of the pR plasmid encodes a function which regulates the expression of the muc genes (plasmid genes that are under the negative control of lexA and responsible for an increased rate of spontaneous mutagenesis and resistance to UV and chemicals). Expression of the muc genes was monitored by a fusion between the muc promoter and the lacZ structural gene. When E. coli cells containing such a fusion are infected by the hybrid pR phasmid, -galactosidase activity is enhanced, indicating that pR encodes an antagonist of lexA. By deletion mapping we have located the gene encoding the antagonist of lexA (bat) in the rep region of the plasmid. The bat gene product can also antagonize the cI repressor as shown by the observation that pR phasmids are virulent on a homoimmune lysogen. We have exploited this latter property to carry out genetic and functional analysis of the bat region. This region is organized as a classical operon where the expression of the bat structural gene is negatively regulated by a repressor gene that encodes a proteic product.