Effect of Rhamnolipid (Biosurfactant) Structure on Solubilization and Biodegradation of n-Alkanes

A study to quantify the effect of rhamnolipid biosurfactant structure on the degradation of alkanes by a variety of Pseudomonas isolates was conducted. Two dirhamnolipids were studied, a methyl ester form (dR-Me) and an acid form (dR-A). These rhamnolipids have different properties with respect to interfacial tension, solubility, and charge. For example, the interfacial tension between hexadecane and water was decreased to <0.1 dyne/cm by the dR-Me but was only decreased to 5 dyne/cm by the dR-A. Solubilization and biodegradation of two alkanes in different physical states, liquid and solid, were determined at dirhamnolipid concentrations ranging from 0.01 to 0.1 mM (7 to 70 mg/liter). The dR-Me markedly enhanced hexadecane (liquid) and octadecane (solid) degradation by seven different Pseudomonas strains. For an eighth strain tested, which exhibited extremely high cell surface hydrophobicity, hexadecane degradation was enhanced but octadecane degradation was inhibited. The dR-A also enhanced hexadecane degradation by all degraders but did so more modestly than the dR-Me. For octadecane, the dR-A only enhanced degradation by strains with low cell surface hydrophobicity.     

Rhamnolipid stimulates uptake of hydrophobic compounds by Pseudomonas aeruginosa

The biodegradation of hexadecane by five biosurfactant-producing bacterial strains (Pseudomonas aeruginosa UG2, Acinetobacter calcoaceticus RAG1, Rhodococcus erythropolis DSM 43066, R. erythropolis ATCC 19558, and strain BCG112) was determined in the presence and absence of exogenously added biosurfactants. The degradation of hexadecane by P. aeruginosa was stimulated only by the rhamnolipid biosurfactant produced by the same organism. This rhamnolipid did not stimulate the biodegradation of hexadecane by the four other strains to the same extent, nor was degradation of hexadecane by these strains stimulated by addition of their own biosurfactants. This suggests that P. aeruginosa has a mode of hexadecane uptake different from those of the other organisms. Rhamnolipid also enhanced the rate of epoxidation of the aliphatic hydrocarbon alpha,omega-tetradecadiene by a cell suspension of P. aeruginosa. Furthermore, the uptake of the hydrophobic probe 1-naphthylphenylamine by cells of P. aeruginosa was enhanced by rhamnolipid, as indicated by stopped-flow fluorescence experiments. Rhamnolipid did not stimulate the uptake rate of this probe in de-energized cells. These results indicate that an energy-dependent system is present in P. aeruginosa strain UG2 that mediates fast uptake of hydrophobic compounds in the presence of rhamnolipid.     

Rhamnolipid (biosurfactant) effects on cell aggregation and biodegradation of residual hexadecane under saturated flow conditions.

The objective of this research was to evaluate the effect of low concentrations of a rhamnolipid biosurfactant on the in situ biodegradation of hydrocarbon entrapped in a porous matrix. Experiments were performed with sand-packed columns under saturated flow conditions with hexadecane as a model hydrocarbon. Application of biosurfactant concentrations greater than the CMC (the concentration at which the surfactant molecules spontaneously form micelles or vesicles [0.03 mM]) resulted primarily in the mobilization of hexadecane entrapped within the sand matrix. In contrast, application of biosurfactant concentrations less than the CMC enhanced the in situ mineralization of entrapped hexadecane; however, this effect was dependent on the choice of bacterial isolate. The two Pseudomonas isolates tested, R4 and ATCC 15524, were used because they exhibit different patterns of biodegradation of hexadecane, and they also differed in their physical response to rhamnolipid addition. ATCC 15524 cells formed extensive multicell aggregates in the presence of rhamnolipid while R4 cells were unaffected. This behavior did not affect the ability of the biosurfactant to enhance the biodegradation of hexadecane in well-mixed soil slurry systems but had a large affect on the extent of entrapped hexadecane biodegradation in the sand-packed-column system that was used in this study.     

Rhamnolipid Stimulates Uptake of Hydrophobic Compounds by Pseudomonas aeruginosa

The biodegradation of hexadecane by five biosurfactant-producing bacterial strains (Pseudomonas aeruginosa UG2, Acinetobacter calcoaceticus RAG1, Rhodococcus erythropolis DSM 43066, R. erythropolis ATCC 19558, and strain BCG112) was determined in the presence and absence of exogenously added biosurfactants. The degradation of hexadecane by P. aeruginosa was stimulated only by the rhamnolipid biosurfactant produced by the same organism. This rhamnolipid did not stimulate the biodegradation of hexadecane by the four other strains to the same extent, nor was degradation of hexadecane by these strains stimulated by addition of their own biosurfactants. This suggests that P. aeruginosa has a mode of hexadecane uptake different from those of the other organisms. Rhamnolipid also enhanced the rate of epoxidation of the aliphatic hydrocarbon α,ω-tetradecadiene by a cell suspension of P. aeruginosa. Furthermore, the uptake of the hydrophobic probe 1-naphthylphenylamine by cells of P. aeruginosa was enhanced by rhamnolipid, as indicated by stopped-flow fluorescence experiments. Rhamnolipid did not stimulate the uptake rate of this probe in de-energized cells. These results indicate that an energy-dependent system is present in P. aeruginosa strain UG2 that mediates fast uptake of hydrophobic compounds in the presence of rhamnolipid.     

Enhanced octadecane dispersion and biodegradation by a Pseudomonas rhamnolipid surfactant (biosurfactant).

A microbial surfactant (biosurfactant) was investigated for its potential to enhance bioavailability and, hence, the biodegradation of octadecane. The rhamnolipid biosurfactant used in this study was extracted from culture supernatants after growth of Pseudomonas aeruginosa ATCC 9027 in phosphate-limited proteose peptone-glucose-ammonium salts medium. Dispersion of octadecane in aqueous solutions was dramatically enhanced by 300 mg of the rhamnolipid biosurfactant per liter, increasing by a factor of more than 4 orders of magnitude, from 0.009 to > 250 mg/liter. The relative enhancement of octadecane dispersion was much greater at low rhamnolipid concentrations than at high concentrations. Rhamnolipid-enhanced octadecane dispersion was found to be dependent on pH and shaking speed. Biodegradation experiments done with an initial octadecane concentration of 1,500 mg/liter showed that 20% of the octadecane was mineralized in 84 h in the presence of 300 mg of rhamnolipid per liter, compared with only 5% octadecane mineralization when no surfactant was present. These results indicate that rhamnolipids may have potential for facilitating the bioremediation of sites contaminated with hydrocarbons having limited water solubility.     

Hydrophobicity of Bacillus and Clostridium spores.

The hydrophobicities of spores and vegetative cells of several species of the genera Bacillus and Clostridium were measured by using the bacterial adherence to hexadecane assay and hydrophobic interaction chromatography. Although spore hydrophobicity varied among species and strains, the spores of each organism were more hydrophobic than the vegetative cells. The relative hydrophobicities determined by the two methods generally agreed. Sporulation media and conditions appeared to have little effect on spore hydrophobicity. However, exposure of spore suspensions to heat treatment caused a considerable increase in spore hydrophobicity. The hydrophobic nature of Bacillus and Clostridium spores suggests that hydrophobic interactions may play a role in the adhesion of these spores to surfaces.     

Hydrophobicity of Bacillus and Clostridium spores

The hydrophobicities of spores and vegetative cells of several species of the genera Bacillus and Clostridium were measured by using the bacterial adherence to hexadecane assay and hydrophobic interaction chromatography. Although spore hydrophobicity varied among species and strains, the spores of each organism were more hydrophobic than the vegetative cells. The relative hydrophobicities determined by the two methods generally agreed. Sporulation media and conditions appeared to have little effect on spore hydrophobicity. However, exposure of spore suspensions to heat treatment caused a considerable increase in spore hydrophobicity. The hydrophobic nature of Bacillus and Clostridium spores suggests that hydrophobic interactions may play a role in the adhesion of these spores to surfaces.     

Effect of rhamnolipid on biodegradation of hydrocarbons in non-aqueous-phase liquid (NAPL)

Aliphatic and aromatic hydrocarbons are environmental pollutants of serious concern. Their bioavailability is the major limiting factor that makes the bioremediation process slow. Therefore, the present study focuses on biodegradation of non-aqueous-phase liquids (NAPL) by a halophilic consortium (Pseudomonas aeruginosa and Escherichia fergusonii) in presence of rhamnolipid as well as a rhamnolipid-producing Pseudomonas aeruginosa AMB AS7. The study was performed in microcosms, and the residual hydrocarbons after degradation were estimated by gas chromatography. It was found that the degradation of hydrocarbons in NAPL was more in presence of rhamnolipid in comparison with their biotic controls. However, among NAPL, the degradation of phenanthrene (37.5%) and octadecane (47.8%) was found to be more by co-culture of halophilic consortium and rhamnolipid-producing P. aeruginosa AMB AS7. Denaturing gradient gel electrophoresis was performed to determine the viability of different bacterial strains (halophilic and rhamnolipid-producing bacterial strain). Besides, the results also revealed that during NAPL degradation, the cell surface hydrophobicity (CSH) of halophilic consortium increased from 9.12% to 69.55% when added with 100 mg/L of rhamnolipid, whereas CSH of rhamnolipid-producing P. aeruginosa AMB AS7 was constant at 31.9%, even though it produced about 271.8 mg/L of rhamnolipid.     

Biodegradation of hydrocarbons in the presence of cyclodextrins

Aliphatic hydrocarbons are one of the main components of oil contamination. Bioremediation is considered to be a cost-effective treatment option among the conventional treatment methods with bioavailability being the limitation. Chemical surfactants could be used to increase the bioavailability of the hydrocarbons but they showed marked toxicity and environmental pollution. Cyclodextrins are cyclic oligosaccharides which can alter the solubility of the hydrocarbons by incorporating suitably sized hydrophobic molecules into their hydrophobic cavities. This paper focuses on studying the degradation of hydrocarbons by Pseudomonas like species named as Vid1 isolated previously from bilge oil contaminated waters in the presence of cyclodextrins. Among the three cyclodextrins (α, β and γ) tested at different concentrations, 2.5 mM of β-cyclodextrin showed higher amount of biodegradation when n-hexadecane was used as a model hydrocarbon compound. The percentage of residual hexadecane remaining in the 2.5 mM β-cyclodextrin supplied medium at 120 h was found to be 15% in comparison with the biotic control which was 43%. In the next experimental setup, degradation of mixture of hydrocarbons (tetradecane, hexadecane and octadecane) by Vid1 (Pseudomonas like species) was studied at a concentration of 2.5 mM β-cyclodextrin. The residual percentage of tetradecane, hexadecane and octadecane at 120 h was found to be 32, 43 and 61% in comparison with the biotic control 50, 58 and 67%, respectively. Our studies show that among a mixture of hydrocarbons (tetradecane, hexadecane and octadecane) in the presence of β-cyclodextrin, the highest concentration of hydrocarbon degradation was found in tetradecane, hexadecane and octadecane, respectively.     

Cell hydrophobicity of <Emphasis Type="Italic">Pseudomonas</Emphasis> spp. and <Emphasis Type="Italic">Bacillus</Emphasis> spp. bacteria and hydrocarbon biodegradation in the presence of Quillaya saponin

Biodegradation and hydrophobicity of Pseudomonas spp. and Bacillus spp. strains were tested at different concentrations of the biosurfactant Quillaya saponin. A model mixture of hydrocarbon (dodecane and hexadecane) was used for estimating the influence of surfactants on biodegradation. The bacterial adhesion to hydrocarbon method for determination of bacterial cell surface hydrophobicity was exploited. Among the tested bacterial strains the higher hydrophobicity was noticed for Pseudomonas aeruginosa TK. The hydrophobicity of this strain was 84%. The highest hydrocarbon biodegradation was observed for P. aeruginosa TK (49%) and Bacillus subtilis (35%) strains after 7 days of experiments. Generally the addition of Quillaya saponin increased hydrocarbon biodegradation remarkably. The optimal concentration proved to be 80 mg l⁻¹. The degree of hydrocarbon biodegradation was 75% for P. aeruginosa TK after the addition of saponin. However the most significant increase in biodegradation after addition of Quillaya saponin was in the case of P. aeruginosa 25 and Pseudomonas putida (the increase of biodegradation from 21 to 52% and from 31 to 66%, respectively). It is worth mentioning that decrease of hydrophobicity is correlated with the best biodegradation by P. aeruginosa strain. For the remaining strains, no significant hydrophobicity changes in relation to the system without surfactant were noticed.     

Surface hydrophobicity and adherence of Candida to acrylic surfaces

The relationship between cell surface hydrophobicities and adherence capacities to acrylic surfaces was investigated with seven laboratory strains and eighteen clinical isolates of Candida species. C. albicans was less adherent to acrylic surfaces than were other species and hardly adhered to hexadecane, whereas other strains, which had a high affinity to hexadecane, were more adherent to acrylic surfaces. A correlation was observed between the adherence capacities of Candida species to acrylic surfaces and their cell hydrophobicities. When acrylic plates were coated with human whole saliva, the contact angle of the plate became smaller than that of the nontreated plate and adherence of hydrophobic strains decreased, whereas the adherence of C. albicans was not affected.     

Relation between Candida maltosa Hydrophobicity and Hydrocarbon Biodegradation

Summary The growth of Candida maltosa on hydrocarbons (dodecane and hexadecane) was influenced by adding various natural and synthetic surfactants. Microbial adhesion to the hydrocarbon was used to measure the surface cell hydrophobicity of the yeast, which in the presence of a synthetic surfactant correlated with the degree of hydrocarbon biodegradation. Non-ionic surfactants caused the highest degree of hydrocarbon biodegradation corresponding the lowest hydrophobicity. A different correlation was observed with natural surfactants, of which saponin was the most effective for hydrocarbon biodegradation, though the concentration of this surfactant had no influence on surface cell hydrophobicity.     

Yeast and bacteria cell hydrophobicity and hydrocarbon biodegradation in the presence of natural surfactants: rhamnolipides and saponins

This study concerns the relation between hydrocarbon biodegradation in the presence of natural surfactants and cell hydrophobicity resulting from the use of these surfactants. The relative capabilities of two bacterial strains (Pseudomonas aeruginosa and Bacillus subtilis) and two yeast strains (Candida maltosa, Yarrowia lipolytica) were investigated. The selected microorganisms were tested separately and in combination in order to achieve the optimal degrading performance. The surface cell hydrophobicity of microorganisms and the degree of hydrocarbon biodegradation were measured. The microbial adhesion to the hydrocarbon (MATH) test was used to denote the surface cell hydrophobicity of the microbial species. The results indicate the correlation between the modification of the surface cell and the degree of hydrocarbon biodegradation; however results for bacteria differ from that obtained for yeast strains. Saponins, as the surfactant, was more effective than rhamnolipides during hydrocarbon biodegradation, though the concentration of this surfactant has no significant influence on the surface cell hydrophobicity.     

Cell-surface hydrophobicity of adherent oral bacteria

Adherent bacteria were released from the surfaces of four freshly extracted teeth by mild sonic oscillation, and screened for cell-surface hydrophobicity on the basis of their ability to adhere to hexadecane. Of the 103 tooth isolates examined, 82 adhered to the test hydrocarbon. Hydrophobic bacteria could similarly be isolated from the stainless steel dental matrix bands following brief incubation in the mouth of a volunteer; 30 of 52 isolates examined adhered to hexadecane. Among those strains which adhered to hexadecane, streptococci were the most frequent type isolated. Various other morphological types were also observed, including cocci, bacilli, coryneforms, and filamentous bacteria. The high overall proportion of hydrophobic bacteria found in this study (72%) suggests that cell-surface hydrophobicity may play a role in adherence of certain oral species to the tooth surface.     

Diversity of bacterial strains degrading hexadecane in relation to the mode of substrate uptake

The relative distribution of the modes of hydrocarbon uptake, used by bacteria of the environment for the degradation of long-chain alkanes, has been evaluated. The first mode of uptake, direct interfacial accession, involves contact of cells with hydrocarbon droplets. In the second mode, biosurfactant-mediated transfer, cell contact takes place with hydrocarbons emulsified or solubilized by biosurfactants. Sixty-one strains growing on hexadecane were isolated from polluted and non-polluted soils and identified. The majority (61%) belonged to the Corynebacterium-Mycobacterium-Nocardia group. Criteria selected for characterizing hexadecane uptake were cell hydrophobicity, interfacial and surface tensions and production of glycolipidic extracellular biosurfactants. These properties were determined in flask cultures on an insoluble (hexadecane) and on a soluble (glycerol or succinate) carbon source for a subset of 23 representative strains. Exclusive direct interfacial uptake was utilized by 47% of studied strains. A large proportion of strains (53%) produced biosurfactants. The data on cellular hydrophobicity suggested the existence of two distinct alkane transfer mechanisms in this group. Accordingly, tentative assignments of biosurfactant-mediated micellar transfer were made for 11% of the isolated strains, and of biosurfactant-enhanced interfacial uptake for 42%.     

Rhamnolipid-induced removal of lipopolysaccharide from Pseudomonas aeruginosa: effect on cell surface properties and interaction with hydrophobic substrates

Little is known about the interaction of biosurfactants with bacterial cells. Recent work in the area of biodegradation suggests that there are two mechanisms by which biosurfactants enhance the biodegradation of slightly soluble organic compounds. First, biosurfactants can solubilize hydrophobic compounds within micelle structures, effectively increasing the apparent aqueous solubility of the organic compound and its availability for uptake by a cell. Second, biosurfactants can cause the cell surface to become more hydrophobic, thereby increasing the association of the cell with the slightly soluble substrate. Since the second mechanism requires very low levels of added biosurfactant, it is the more intriguing of the two mechanisms from the perspective of enhancing the biodegradation process. This is because, in practical terms, addition of low levels of biosurfactants will be more cost-effective for bioremediation. To successfully optimize the use of biosurfactants in the bioremediation process, their effect on cell surfaces must be understood. We report here that rhamnolipid biosurfactant causes the cell surface of Pseudomonas spp. to become hydrophobic through release of lipopolysaccharide (LPS). In this study, two Pseudomonas aeruginosa strains were grown on glucose and hexadecane to investigate the chemical and structural changes that occur in the presence of a rhamnolipid biosurfactant. Results showed that rhamnolipids caused an overall loss in cellular fatty acid content. Loss of fatty acids was due to release of LPS from the outer membrane, as demonstrated by 2-keto-3-deoxyoctonic acid and sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis and further confirmed by scanning electron microscopy. The amount of LPS loss was found to be dependent on rhamnolipid concentration, but significant loss occurred even at concentrations less than the critical micelle concentration. We conclude that rhamnolipid-induced LPS release is the probable mechanism of enhanced cell surface hydrophobicity.     

Rhamnolipid-Induced Removal of Lipopolysaccharide from Pseudomonas aeruginosa: Effect on Cell Surface Properties and Interaction with Hydrophobic Substrates

Little is known about the interaction of biosurfactants with bacterial cells. Recent work in the area of biodegradation suggests that there are two mechanisms by which biosurfactants enhance the biodegradation of slightly soluble organic compounds. First, biosurfactants can solubilize hydrophobic compounds within micelle structures, effectively increasing the apparent aqueous solubility of the organic compound and its availability for uptake by a cell. Second, biosurfactants can cause the cell surface to become more hydrophobic, thereby increasing the association of the cell with the slightly soluble substrate. Since the second mechanism requires very low levels of added biosurfactant, it is the more intriguing of the two mechanisms from the perspective of enhancing the biodegradation process. This is because, in practical terms, addition of low levels of biosurfactants will be more cost-effective for bioremediation. To successfully optimize the use of biosurfactants in the bioremediation process, their effect on cell surfaces must be understood. We report here that rhamnolipid biosurfactant causes the cell surface of Pseudomonas spp. to become hydrophobic through release of lipopolysaccharide (LPS). In this study, two Pseudomonas aeruginosa strains were grown on glucose and hexadecane to investigate the chemical and structural changes that occur in the presence of a rhamnolipid biosurfactant. Results showed that rhamnolipids caused an overall loss in cellular fatty acid content. Loss of fatty acids was due to release of LPS from the outer membrane, as demonstrated by 2-keto-3-deoxyoctonic acid and sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis and further confirmed by scanning electron microscopy. The amount of LPS loss was found to be dependent on rhamnolipid concentration, but significant loss occurred even at concentrations less than the critical micelle concentration. We conclude that rhamnolipid-induced LPS release is the probable mechanism of enhanced cell surface hydrophobicity.     

Comparison of contact angles and adhesion to hexadecane of urogenital, dairy, and poultry lactobacilli: effect of serial culture passages.

The aim of this study was to examine the hydrophobicities of 23 urogenital, dairy, poultry, and American Type Culture Collection isolates of lactobacilli and to determine the effect on hydrophobicity of serially passaging the strains in liquid medium. To this end, strains were grown after isolation and identification and then serially passaged up to 20 times. Hydrophobicity was assessed through contact angle measurements on lawns of cells by using water, formamide, methylene iodide, 1-bromonaphthalene, and hexadecane as wetting agents and through measurement of their partitioning in a hexadecane-water system. The hydrophobicities of these strains varied widely, with Lactobacillus casei strains being predominantly hydrophilic and L. acidophilus strains being mostly hydrophobic. For some isolates, serial passaging was accompanied by a clear loss of hydrophobic surface properties, whereas for other strains, cultures became heterogeneous in that some cells had already lost their hydrophobic surface properties while others were still hydrophobic. Adhesion of this collection of lactobacilli to hexadecane droplets in microbial adhesion to hexadecane (MATH) tests was driven by their aversion to water rather than by their affinity for hexadecane, as concluded from the fact that hexadecane contact angles were zero for all strains. Furthermore, adhesion of the lactobacilli to hexadecane in MATH tests occurred only when the water contact angle on the cells was above 60 degrees.