Liquid phase SPR imaging experiments for biosensors applications

Surface plasmon resonance (SPR) has recently gained attention as a label-free method for the detection of biological molecules binding onto functionalised surfaces. It is one of the most sensitive detection method for monitor variations in the thickness and refractive index in ultra-thin films. Here, the adsorption processes of oligonucleotides onto gold substrates have been investigated in aqueous buffer solution using SPR imaging measurements. The hybridization of a thiol-modified, single stranded oligonucleotide anchored to a gold surface via thiol group, with its complementary sequence has been observed and characterised monitoring the hybridization process by SPR equipment. In situ investigation of smallest changes in SPR imaging measurements dynamically performed in liquid phase in the presence of DNA complementary probes was performed. Infrared spectroscopy and scanning electron microscopy characterisation of the functionalised gold surfaces of the biosensor were compared with the images obtained by SPR experimental apparatus.     

Immobilisation of DNA probes for the development of SPR-based sensing

An immobilisation procedure based on the direct coupling of thiol-derivatised oligonucleotide probes to bare gold sensor surfaces has been used for DNA sensing applications. The instrumentation used relies on surface plasmon resonance (SPR) transduction; in particular the commercially available instruments BIACORE X and SPREETA, have been employed in this study. The performances of the SPR-based DNA sensors resulting from direct coupling of thiol-derivatised DNA probes onto gold chips, have been studied in terms of the main analytical parameters, i.e. selectivity, sensitivity, reproducibility, analysis time, etc. A comparison between the thiol-derivatised immobilisation approach and a reference immobilisation method, based on the coupling of biotinylated oligonucleotide probes onto a streptavidin coated dextran sensor surface, using synthetic complementary oligonucleotides has been discussed. Finally, a denaturation method to obtain ssDNA ready for hybridisation analysis has been applied to polymerase chain reaction (PCR) amplified samples, for the detection of genetically modified organisms (GMOs).     

Detection of TP53 mutation using a portable surface plasmon resonance DNA-based biosensor

A DNA-based surface plasmon resonance (SPR) biosensor has been developed for the detection of TP53 mutation using the inexpensive and commercially available instrument, SPREETA SPR-EVM-BT, from Texas Instruments. A direct immobilisation procedure, based on the coupling of thiol-derivatised oligonucleotide probes (Probe-C6-SH) to bare gold sensor surfaces, was optimized using synthetic oligonucleotides. Hybridisation reactions between the immobilised probe and a short sequence (26 mer) complementary, non-complementary and one-point mutation DNA were then investigated. The main analytical parameters of the sensor system were studied in detail including selectivity, sensitivity, reproducibility and analysis time. Finally, the sensor system was successfully applied to polymerase chain reaction (PCR)-amplified real samples, DNA extracted from both normal, wild-type, (Jurkat) and mutated (Molt 4), carrying the mutation at codon 248 of the TP53 cell lines. The results obtained demonstrate that the DNA-based SPR biosensor was able to distinguish sequences present in the various samples that differ only by one base; and hence, it appears to be a strong candidate technique for the detection of gene mutation.     

A new approach for the detection of DNA sequences in amplified nucleic acids by a surface plasmon resonance biosensor

In this paper, a simple and useful approach for DNA sensing based on surface plasmon resonance (SPR) transduction is reported. A new DNA sample pre-treatment has been optimised to allow fast and simple detection of hybridisation reaction between a target sequence in solution and a probe immobilised on the sensing surface. This pre-treatment consisted in a denaturation procedure of double stranded DNA containing the target sequence and was based on an high temperature treatment (95 degrees C, 5 min) followed by a 1 min incubation with small oligonucleotides. The oligonucleotides are designed to prevent the re-hybridising of the denatured strands, while enabling the target sequence to bind the immobilised probe. The important parameters of the procedure, i.e. incubation time, length and concentration of the oligonucleotides, have been studied in detail. The optimised DNA denaturation procedure has been successfully applied to the detection of amplified DNA with a commercially available SPR biosensor (Biacore X). DNA samples extracted from plant and human blood were tested after amplification by polymerase chain reaction (PCR).     

Coupling of a DNA piezoelectric biosensor and polymerase chain reaction to detect apolipoprotein E polymorphisms

In this paper we report the coupling of the Polymerase Chain Reaction (PCR) with a piezoelectric biosensor to detect a point mutation in a human gene. Biotinylated 23-mer probes were immobilised on the streptavidin coated gold surface of a quartz crystal; streptavidin was covalently bound to the thiol/dextran modified gold surface. The hybridisation of the immobilised probes with a short sequence (23 mer) complementary, non-complementary and mismatched DNA was investigated: the device was able to distinguish the different synthetic oligonucleotides. Many cycles of measurements can be performed on the same crystal surface regenerating the single strand of DNA with 1 mM of HCl. The same hybridisation reaction was then performed using real samples of human DNA extracted from blood and amplified by PCR, following a standard procedure for genetic detection of the polymorphism of the apolipoprotein E (apoE) gene. The procedure was able to distinguish the sequences present in the different samples, which differ only in one base: in this way it was possible distinguish between different groups of genotypes with apoE typing. Experiments with 'blank' samples confirmed the absence of adsorption or non-specific effects on the quartz crystal treated with the reported procedure.     

DNA microdevice for electrochemical detection of Escherichia coli 0157:H7 molecular markers

An electrochemical DNA sensor based on the hybridization recognition of a single-stranded DNA (ssDNA) probe immobilized onto a gold electrode to its complementary ssDNA is presented. The DNA probe is bound on gold surface electrode by using self-assembled monolayer (SAM) technology. An optimized mixed SAM with a blocking molecule preventing the nonspecific adsorption on the electrode surface has been prepared. In this paper, a DNA biosensor is designed by means of the immobilization of a single stranded DNA probe on an electrochemical transducer surface to recognize specifically Escherichia coli (E. coli) 0157:H7 complementary target DNA sequence via cyclic voltammetry experiments. The 21 mer DNA probe including a C6 alkanethiol group at the 5' phosphate end has been synthesized to form the SAM onto the gold surface through the gold sulfur bond. The goal of this paper has been to design, characterise and optimise an electrochemical DNA sensor. In order to investigate the oligonucleotide probe immobilization and the hybridization detection, experiments with different concentration of DNA and mismatch sequences have been performed. This microdevice has demonstrated the suitability of oligonucleotide Self-assembled monolayers (SAMs) on gold as immobilization method. The DNA probes deposited on gold surface have been functional and able to detect changes in bases sequence in a 21-mer oligonucleotide.     

DNA immobilisation procedures for surface plasmon resonance imaging (SPRI) based microarray systems

Two different surface chemistries have been studied for the development of surface plasmon resonance imaging (SPRI) based DNA microarray affinity sensors: (1) 11-mercaptoundecanoic acid-poly(ethylenimine) (MUA-PEI) and (2) dextran procedures. The MUA-PEI method consists of assembling a multilayer on the basis of electrostatic interactions formed with: 11-mercaptoundecanoic acid (MUA), poly(ethylenimine) (PEI) and extravidin layers. The dextran procedure involves assembling a multilayer formed with 11-mercaptoundecanol, dextran and streptavidin layers, which are linked by covalent bonds. The oligonucleotide probes are immobilised onto the sensor surface as spots forming a matrix 14x14, which is spotted by a robot, while the target sequences are free in solution. The system allows the interaction (hybridisation) monitoring, in real-time and in parallel, of unlabeled oligonucleotide solution targets to oligonucleotide probes immobilised on a 196 spots matrix. Using oligonucleotides as probes and targets, both functionalised surfaces have been evaluated in view of their application to the diagnosis of gene mutations involved in human diseases. In particular, we demonstrate the ability to detect, in parallel, several mutations causing human cystic fibrosis (CF), which lie within exon 10 of the human cystic fibrosis transmembrane conductance regulator (CFTR) gene. The immobilised probes were complementary to sequences corresponding the mutant or wild type alleles. Two deletions of three bases (DeltaF508 and DeltaI507) and four single nucleotide polymorphisms (M470V, Q493X, V520F and 1716 G>A) were investigated. In both functionalised surfaces, the system showed the capacity to discriminate normal and mutant sequences differing by a single base.     

Detection and kinetic studies of triplex formation by oligodeoxynucleotides using real-time biomolecular interaction analysis (BIA).

Real-time biomolecular interaction analysis (BIA) has been applied to triplex formation between oligodeoxynucleotides. 5'-Biotinylated oligonucleotides were immobilised on the streptavidin-coated surface of a biosensor chip and subsequently hybridised to their complementary strand. Sequence-specific triplex formation was observed when a suitable third-strand oligopyrimidine was injected over the surface-bound duplex. In addition, a single-stranded oligonucleotide immobilised on the chip surface was able to capture a DNA duplex by triplex recognition. The presence of spermine increases the rate of association between the third strand and immobilised duplex, but at elevated spermine concentrations non-specific association is observed. A preliminary kinetic analysis of triplex formation at pH 5.2 by an 11mer third strand containing thymine, cytosine and uracil is reported. Values for the association and dissociation rate constants were determined to be (1.9 +/- 0.2) x 10(3) M-1 s-1 and (8.1 +/- 1.9) x 10(-5) s-1, respectively.     

A DNA sensor based on surface plasmon resonance for apoptosis-associated genes detection

A practical and simple DNA sensor based on surface plasmon resonance (SPR) had been developed to determine apoptosis-associated genes, bcl-2 and bax. This SPR sensor was designed on the basis of simultaneous multi-wavelength detection. The complementary sequences of bcl-2 or bax oligonucleotide labeled with biotin were used as the probes. Biotin-avidin system was used to immobilize the bio-DNA on the sensor surface. The assembling processes and conditions for the DNA sensor were examined. The SPR sensor could be used to monitor the process of the immobility of the bio-DNA and DNA hybridization in real-time. The determination range of bcl-2 and bax oligonucleotide (20 bases) were 50-400 ng/mL. The determination range of polymerase chain reaction (PCR) product of bcl-2 (405 bases) was 5-60 ng/mL and PCR product of bax (538 bases) was 5-40 ng/mL. The stability, reversibility and specificity of the DNA sensor were also investigated. It was found from the experiment that the sensor could be applied for a quite long time (about 90 times). The relative standard deviation (R.S.D.) for determination oligonucleotides and PCR products of bcl-2 were 1.2 and 1.3%, respectively. The interference of noncomplementary DNA sequence with the determination of DNA was examined and it was found that noncomplementary 20-mer and 21-mer DNA (p53 and p21) do not affect the determination of bcl-2 or bax. This device could be used to study apoptosis and signal transduction routine genes. The sensor was shown to be of simplicity, sensitivity, selectivity, rapid response and cost effectiveness.     

Quartz crystal microbalance (QCM) affinity biosensor for genetically modified organisms (GMOs) detection

A DNA piezoelectric sensor has been developed for the detection of genetically modified organisms (GMOs). Single stranded DNA (ssDNA) probes were immobilised on the sensor surface of a quartz crystal microbalance (QCM) device and the hybridisation between the immobilised probe and the target complementary sequence in solution was monitored. The probe sequences were internal to the sequence of the 35S promoter (P) and Nos terminator (T), which are inserted sequences in the genome of GMOs regulating the transgene expression. Two different probe immobilisation procedures were applied: (a) a thiol-dextran procedure and (b) a thiol-derivatised probe and blocking thiol procedure. The system has been optimised using synthetic oligonucleotides, which were then applied to samples of plasmidic and genomic DNA isolated from the pBI121 plasmid, certified reference materials (CRM), and real samples amplified by the polymerase chain reaction (PCR). The analytical parameters of the sensor have been investigated (sensitivity, reproducibility, lifetime etc.). The results obtained showed that both immobilisation procedures enabled sensitive and specific detection of GMOs, providing a useful tool for screening analysis in food samples.     

Surface Plasmon Resonance Studies of the Hybridization Behavior of DNA-Modified Gold Nanoparticles with Surface-Attached DNA Probes

Colloidal gold nanoparticles (AuNPs) have been extensively investigated as amplification tags to improve the sensitivity of surface plasmon resonance (SPR) biosensors. When using the so-called AuNP-enhanced SPR technique for DNA detection, the density of single-stranded DNA (ssDNA) on both the AuNPs and planar gold substrates is of crucial importance. Thus, in this work, we carried out a systematical study about the influence of surface ssDNA density onto the hybridization behavior of various DNA-modified AuNPs (DNA-AuNPs) with surface-attached DNA probes by using surface plasmon resonance spectroscopy. The lateral densities of the ssDNA on both the AuNPs and planar gold substrates were controlled by using different lengths of oligo-adenine sequence (OAS) as anchoring group. Besides SPR measurements, the amount of the captured DNA-AuNPs after the hybridization was further identified via atomic force microscope (AFM). SPR and AFM results clearly indicated that a higher ssDNA density on either the AuNPs or the gold substrates would give rise to better hybridization efficiency. Moreover, SPR data showed that the captured DNA-AuNPs could not be removed from SPR sensor surfaces using various dehybridization solutions regardless of surface ssDNA density. Consequently, it is apparent that the hybridization behavior of DNA-AuNPs was different from that of solution-phase ssDNA. Based on these data, we hypothesized that both multiple recognitions and limited accessibility might account for the hybridization of DNA-AuNPs with surface-attached ssDNA probes.

     

Femtomol SPR detection of DNA-PNA hybridization with the assistance of DNA-guided polyaniline deposition

The inability of surface plasmon resonance (SPR) spectroscopy to detect extremely small refractive index changes has hindered its applications in ultrasensitive DNA analysis. In this study we report a signal amplification strategy that uses DNA-templated polyaniline deposition, suitable for DNA hybridization analysis with charge neutral peptide nucleic acid (PNA) being probes. Under acidic conditions, protonated aniline monomers are adsorbed on DNA backbones through electrostatic interaction. The microenvironment provided by the DNA facilitates oxidative aniline polymerization initialized by H₂O₂ in the presence of horseradish peroxide. Under optimal conditions, the detection limit is lowered from 5 nM for conventional SPR detection to 0.1 pM. The significant sensitivity improvement is attributed to the in-situ polymer chain growth along DNA strands, which introduces drastic refractive index increases. This signal amplification approach does not involve secondary hybridization processes. The detection sensitivity obtained is much better than that of gold nanoparticle-based amplification involving a secondary hybridization process and labeled DNA detection probes.     

Imaging immobilised ssDNA and detecting DNA hybridisation by means of the repelling mode of scanning electrochemical microscopy (SECM)

The supposed repelling mode of scanning electrochemical microscopy (SECM) allows truly label-free electrochemical recognition of the presence and hybridisation of nucleic acids that are immobilised on conducting DNA chips. Basically, the SECM-based detection of single- and double-stranded DNA profits from the electrostatic repulsion between deprotonated phosphate groups at the backbone of the oligonucleotides and a free-diffusing negatively charged redox mediator (e.g. [Fe(CN)(6)](3-/4-)). In electrolytes of proper pH and ionic strength, this coulomb interaction is heavily influencing the diffusion properties of the mediator in the vicinity of the surface-anchored DNA strands. This charge interaction modulates the diffusional mass transport for the charged redox species in the DNA modified regions, and thus locally decreases the positive feedback currents measured with a SECM tip placed within the electrochemical nearfield of the chip surface. This approach was used to study arrays of synthetic 20-base oligonucleotide probes that were immobilised on monolayer-modified gold surfaces. Evidence is provided that the density of probes, the ionic strength of solution and the tip-to-sample distance have a strong impact on the capability of the repelling mode of SECM to visualise probe spots and hybridisation while the concentration of the chosen mediator did not significantly affect detection.     

Label-free detection of 16S ribosomal RNA hybridization on reusable DNA arrays using surface plasmon resonance imaging

In this paper, we describe the detection of bacterial cell-extracted 16S ribosomal RNA (rRNA) using an emerging technology, surface plasmon resonance (SPR) imaging of DNA arrays. Surface plasmon resonance enables detection of molecular interactions on surfaces in response to changes in the index of refraction, therefore eliminating the need for a fluorescent or radioactive label. A variation of the more common SPR techniques, SPR imaging enables detection from multiple probes in a reusable array format. The arrays developed here contain DNA probes (15-21 bases) designed to be complementary to 16S rRNA gene sequences of Escherichia coli and Bacillus subtilis as well as to a highly conserved sequence found in rRNAs from most members of the domain Bacteria. We report species-specific hybridization of cell-extracted total RNA and in vitro transcribed 16S rRNA to oligonucleotide probes on SPR arrays. We tested multiple probe sequences for each species, and found that success or failure of hybridization was dependent upon probe position in the 16S rRNA molecule. It was also determined that one of the probes intended to bind 16S rRNA also bound an unknown protein. The amount of binding to these probes was quantified with SPR imaging. A detection limit of 2 micro g ml-1 was determined for fragmented E. coli total cellular RNA under the experimental conditions used. These results indicate the feasibility of using SPR imaging for 16S rRNA identification and encourage further development of this method for direct detection of other RNA molecules.     

Gold nanoparticle-based detection of genomic DNA targets on microarrays using a novel optical detection system

The development of a nanoparticle-based detection methodology for sensitive and specific DNA-based diagnostic applications is described. The technology utilizes gold nanoparticles derivatized with thiol modified oligonucleotides that are designed to bind complementary DNA targets. A glass surface with arrays of immobilized oligonucleotide capture sequences is used to capture DNA targets, which are then detected via hybridization to the gold nanoparticle probes. Amplification with silver allows for detection and quantitation by measuring evanescent wave induced light scatter with low-cost optical detection systems. Compared to Cy3-based fluorescence, silver amplified gold nanoparticle probes provide for a approximately 1000-fold increase in sensitivity. Furthermore, direct detection of non-amplified genomic DNA from infectious agents is afforded through increased specificity and even identification of single nucleotide polymorphisms (SNP) in human genomic DNA appears feasible.     

Imaging surface plasmon resonance system for screening affinity ligands

A surface plasmon resonance (SPR) system for screening ligands for application in affinity chromatography is described. A combinatorial library of 13 ligands was synthesised, characterised and immobilised to agarose beads and gold SPR devices. Binding and elution behaviour and a range of K(AX) values (10(3) to 10(5) M(-1)) were measured against two target proteins, an insulin analogue (MI3) and a recombinant clotting factor (rFVIIa), in order to create a relational database between the traditional chromatographic format and the new SPR screening system. The SPR transducer surface was fabricated with affinity ligands in a two-dimensional, spatially addressable format, which was durable (>100 cycles) and stable over 6 months. The imaging SPR system comprised a direct optical, CCD-based, instrument capable of imaging the change in refractive index created by biochemical interactions and allowed affinity ligands to be evaluated 15-fold faster with 130-fold less target protein than conventional chromatographic methods. The binding and elution data from both the SPR and chromatographic systems for both target proteins were comparable, with the K(AX) value generating a nearly linear correlation (R(2)=0.875) and a slope bias of approximately 2.5+/-0.25-fold higher for the SPR system. The imaging SPR system has proven capable of screening and evaluating affinity ligands for potential use in the recovery of biopharmaceutical proteins.     

High-throughput SPR sensor for food safety

High-throughput surface plasmon resonance (SPR) biosensor for rapid and parallelized detection of nucleic acids identifying specific bacterial pathogens is reported. The biosensor consists of a high-performance SPR imaging sensor with polarization contrast and internal referencing (refractive index resolution 2 x 10(-7) RIU) and an array of DNA probes microspotted on the surface of the SPR sensor. It is demonstrated that short sequences of nucleic acids (20-23 bases) characteristic for bacterial pathogens such as Brucella abortus, Escherichia coli, and Staphylococcus aureus can be detected at 100 pM levels. Detection of specific DNA or RNA sequences can be performed in less than 15 min by the reported SPR sensor.     

Point mutation detection with the sandwich method employing hydrogel nanospheres by the surface plasmon resonance imaging technique

We propose a surface modification procedure to construct DNA arrays for use in surface plasmon resonance (SPR) imaging studies for the highly sensitive detection of a K-ras point mutation, enhanced with hydrogel nanospheres. A homobifunctional alkane dithiol was adsorbed on Au film to obtain the thiol surface, and ethyleneglycol diglycidylether (EGDE) was reacted to insert the ethyleneglycol moiety, which can suppress nonspecific adsorption during SPR analysis. Then streptavidin (SA) was immobilized on EGDE using tosyl chloride activation. Biotinylated DNA ligands were bound to the SA surface via biotin-SA interaction to fabricate DNA arrays. In SPR analysis, the DNA analyte was exposed on the DNA array and hybridized with the immobilized DNA probes. Subsequently, the hydrogel nanospheres conjugated with DNA probes were bound to the DNA analytes in a sandwich configuration. The DNA-carrying nanospheres led to SPR signal enhancement and enabled us to discriminate a K-ras point mutation in the SPR difference image. The application of DNA-carrying hydrogel nanospheres for SPR imaging assays was a promising technique for high throughput and precise detection of point mutations.     

Streptavidin conjugates with gold nanoparticles for visualization of single DNA interactions on the silicon surface

Applicability of scanning electron microscopy (SEM) for visualization of individual acts of DNA hybridization with oligonucleotide probes has been investigated using gold nanoparticles as a label. DNA or oligonucleotides were labeled with biotin molecules, which were then detected in DNA duplexes using a streptavidin conjugate with gold nanoparticles. Effective imaging of DNA duplexes was possible using the conjugate prepared by covalent binding. The detection limit of the model oligonucleotide of 19 bases was 20 pg.     

Genotyping by allele-specific L-DNA-tagged PCR

We have developed a novel method for typing single-nucleotide polymorphisms (SNPs) that can be applicable to rapid screening. The method involves the fusion of two PCR techniques, allele-specific PCR (AS-PCR) and L-DNA-tagged PCR (LT-PCR), which enables us to label PCR products with sequence-defined tags of mirror-image DNA (L-DNA). PCR products were applied without any purification or denaturation steps to gold surfaces where complementary single-stranded L-DNA was immobilized, and the products were detected with surface plasmon resonance (SPR) imaging. We were able to clearly discriminate 3 genotypes at position 2677 of the MDR1 gene (G/G-homozygote, G/T-heterozygote, and T/T-homozygote) by comparing SPR difference images.