Maintenance of plasmids in HU and 1HF mutants of Escherichia coli

Summary Complementation and sequencing analyses revealed that the hopD mutants, which could not support stable maintenance of mini-F plasmids (Niki et al. 1988), had mutations in the hupB gene, and that the hopD410 mutation was an ochre mutation at the 5th Gln position of HU-1. Maintenance and stability of various plasmids, mini-P1 plasmids, mini-F plasmids, and oriC plasmids, were studied in the hupA and hupB mutants (HU mutants), and himA and hip mutants (IHF mutants). Mini-P1 plasmids and mini-F plasmids could not be introduced into the hupA-hupB double deletion mutant. Replication of mini-F plasmids was partially inhibited in the hupB mutants, including the hupB and hopD(hupB) mutants, whereas replication of oriC plasmids was not significantly affected even in the hupA-hupB double deletion mutant. The mini-P1 plasmid was slightly unstable in the himA-hip mutant, whereas the mini-F plasmid was stable.     

Possible involvement of the ugpA gene product in the stable maintenance of mini-F plasmid in Escherichia coli

Summary The seg-3 mutant Escherichia coli does not support the maintenance of mini-F plasmid at 42° C. We cloned the chromosomal DNA segment of the wild-type strain W3110 that complements the Seg^– phenotype of this mutant. Cleavage mapping of this segment showed that it was derived from the 76-min region of the E. coli chromosome map. Complementation tests using plasmids carrying subcloned DNA segments suggested that the seg-3 mutant carried two mutations that additively affected the maintenance of mini-F plasmid; one was in the ugpA gene and the other was presumably in the rpoH gene. We generated a disrupted ugpA null mutant and found that the mini-F plasmid was unstable in this ugpA null mutant even at 30° C. This suggests that the ugpA gene product is required for the stable maintenance of mini-F plasmid.     

Plasmid-mediated lethality and plasmid multimer formation in an Escherichia coli recBC sbcBC mutant. Involvement of RecF recombination pathway genes

Apparent plasmid instability, i.e. progressive plasmid loss in a bacterial culture growing in the absence of selection for the plasmid, in an Escherichia coli recBC sbcBC mutant was investigated with two different ColE1 derivatives (pMB9 and pBR322) and a mini-F plasmid. The instability was most striking for pMB9 and much less, but still significant, for pBR322 and the mini-F. It was also dependent upon a subset of the genes involved in the RecF recombination pathway: in addition to the previously reported recA, recF and recJ mutations, a recO and a recQ mutation showed a total and a partial suppression, respectively, of the instability. Other recF-family mutations, recN and ruv, were without such an effect. Population analyses of the recBC sbcBC strain carrying pMB9 or the mini-F, as carried out by plating and Coulter counting, revealed marked loss of viability in plasmid-carrying cells, strongly implicating plasmid-mediated cell death in the apparent defect in plasmid maintenance. Analysis of intracellular plasmid DNA by pulsed-field gel electrophoresis combined with the in-agarose cell lysis technique showed that the instability was associated with the formation of plasmid multimers, with a good correlation between the degree of the instability and the amount of the multimers. The multimer formation was also dependent on the same subset of the RecF pathway genes as in the instability phenomenon. These results strongly suggest that the lethality is somehow caused by the multimer formation. Various DNase treatments of cell lysates showed that such multimers of pMB9 DNA comprised molecules of exonuclease-sensitive and exonuclease-resistant types. It was inferred that the former class, which showed electrophoretic mobilities corresponding to plain linear duplexes of approximately 200 x 10(3) to 2200 x 10(3) base-pairs, represented linear multimers possibly carrying circular structures at one end. The latter class, which remained in the origin, was thought to consist of circular multimers and/or linear multimers protected by circular structures at both ends against exonucleolytic attack.     

Effect of recF, recJ, recN, recO and ruv mutations on ultraviolet survival and genetic recombination in a recD strain of Escherichia coli K12

Summary DNA repair and recombination were investigated in a recD mutant of Escherichia coli which lacked the nuclease activity of the RecBCD enzyme. The resistance of this mutant to ultraviolet (UV) light was shown to be a function of recJ. A recD recJ double mutant was found to be more sensitive to UV radiation than a recB mutant, whereas recD and recJ single mutants were resistant. Recombination in conjugational crosses with Hfr donors was also reduced in recD recJ strains, but the effect was modest in comparison with the sensitivity to UV. Within certain limits, mutations in recF, recN, recO, lexA and ruv did not affect sensitivity to UV and recombination in a recD mutant any more than in a recD ⁺ strain. The possibility that recD and recJ provide overlapping activities, either of which can promote DNA repair and recombination in the absence of the other, is discussed.     

Partitioning of the F plasmid: Overproduction of an essential protein for partition inhibits plasmid maintenance

Summary Multicopy plasmids carrying the sopB gene of the F plasmid inhibit stable inheritance of a coexisting mini-F plasmid. This incompatibility, termed IncG, is found to be caused by excess amounts of the SopB protein, which is essential for accuratepartitioning of plasmid DNA molecules into daughter cells. A sopB-carrying multicopy plasmid that shows the IncG⁺ phenotype was mutagenized in vitro and IncG negative mutant plasmids were isolated. Among these amber and missense mutants of sopB, mutants with a low plasmid copy number and a mutant in the Shine-Dalgarno sequence for translation of the SopB protein were obtained. These results demonstrate that the IncG phenotype is caused by the SopB protein, and that the incompatibility is expressed only when the protein is overproduced. This suggests that the protein must be kept at appropriate concentrations to ensure stable maintenance of the plasmid.     

Synthesis of linear plasmid multimers in Escherichia coli K-12.

Linear plasmid multimers were identified in extracts of recB21 recC22 strains containing derivatives of the ColE1-type plasmids pACYC184 and pBR322. A mutation in sbcB increases the proportion of plasmid DNA as linear multimers. A model to explain this is based on proposed roles of RecBC enzyme and SbcB enzyme (DNA exonuclease I) in preventing two types of rolling-circle DNA synthesis. Support for this hypothesis was obtained by derepressing synthesis of an inhibitor of RecBC enzyme and observing a difference in control of linear multimer synthesis and monomer circle replication. Reinitiation of rolling-circle DNA synthesis was proposed to occur by recA+-dependent and recA+-independent recombination events involving linear multimers. The presence of linear plasmid multimers in recB and recC mutants sheds new light on plasmid recombination frequencies in various mutant strains.     

Involvement of DnaK protein in mini-F plasmid replication: temperature-sensitive seg mutations are located in the dnaK gene

Summary The seg mutants (seg-1 and seg-2) of Escherichia coli cannot support the replication of the F factor and mini-F plasmids at 42°C. We cloned the wild-type E. coli chromosomal DNA fragment complementing the seg-1 and seg-2 mutations and found that both mutations were complemented by the wild-type dnaK gene coding for a heat shock protein. Transduction with phage P1 indicated that the seg-2 mutation is located at about 0.3 min in the region containing the dnaK gene in the order trpR-thrA-seg-2-leuB, consistent with the locus of the dnaK gene. Cloning and sequencing of the dnaK gene of the seg mutants showed that there was one base substitution within the dnaK gene in each mutant causing an amino acid substitution. These results indicate that the seg gene in which the seg-1 and seg-2 mutations occurred is identical to the dnaK gene. The mini-F plasmid pXX325 did not transform a dnaK null mutant to ampicillin resistance at 30°C in contrast to plasmids pBR322, pACYC184 and pSC101, which did. The active dnaK (seg) gene product is therefore essential for replication of the mini-F plasmid at both 30° and 42°C.     

Identification of the recR locus of Escherichia coli K-12 and analysis of its role in recombination and DNA repair

Summary A new recombination gene called recR has been identified and located near dnaZ at minute 11 on the current linkage map of Escherichia coli. The gene was detected after transposon mutagenesis of a recB sbcB sbcC strain and screening for insertion mutants that had a reduced efficiency of recombination in Hfr crosses. The recR insertions obtained conferred a recombination deficient and extremely UV sensitive phenotype in both recB recC sbcA and recB recC sbcB sbcC genetic backgrounds. recR derivatives of recBC ⁺ sbc ⁺ strains were proficient in conjugational and transductional recombination but deficient in plasmid recombination and sensitive to UV light. Strains carrying recR insertions combined with mutations uvrA and other rec genes revealed that the gene is involved in a recombinational process of DNA repair that relies also on recF and recO, and possibly recJ, but which is independent of recB, recC and recD. The properties of two other insertions, one located near pyrE and the other near guaA, are discussed in relation to their proximity to recG and xse (the gene for exonuclease VII), respectively.     

Cloning of the lkyB (tolB) gene of Escherichia coli K12 and characterization of its product

Summary The lkyB gene of Escherichia coli K12 has been cloned from the Clarke and Carbon colony bank by selecting a ColE1 plasmid conferring cholic acid resistance to lkyB mutants. The lkyB gene was localized on hybrid plasmid pJC778 by analysis of mutated plasmids generated by Tn5 insertions. Restriction analysis and complementation studies indicated that plasmid pJC778 carried genes nadA, lkyB and sucA which mapped at min 16.5; the lkyB ⁺ allele was dominant over the lkyB207 mutant allele. Analysis of cell envelope proteins from strains carrying plasmids pJC778 (lkyB ⁺), pJC2578 or pJC2579 (lkyB::Tn5), as well as plasmid-coded proteins in a maxicell system, made it likely that the lkyB gene product was a membrane protein of molecular weight 42,000.     

Lambda red-mediated synthesis of plasmid linear multimers in Escherichia coli K12

Summary Expression of the red ⁺ and gam ⁺ genes of bacteriophage in plasmids cloned in Escherichia coli wild-type cells leads to plasmid linear multimer (PLM) formation. In mutants that lack exonuclease I (sbcB sbcC), either of these functions mediates PLM formation. In order to determine whether PLM formation in sbcB sbcC mutants occurs by conservative (break-join) recombination of circular plasmids or by de novo DNA synthesis, thyA sbcB sbcC mutants were transferred from thymine- to 5-bromo-2-deoxyuridine (BUDR)-supplemented medium, concurrently with induction of red ⁺ or gam ⁺ expression, and the density distribution of plasmid molecular species was analyzed. After a period of less than one generation in the BUDR-supplemented medium, most PLM were of heavy/heavy density. Circular plasmids, as well as chromosomal DNA, were of light/light or light/heavy density. These results indicate that Red or Gam activities mediate de novo synthesis of PLM in sbcB sbcC mutants. Examination of plasmid DNA preparations from sbcB sbcC mutants expressing gam ⁺ or red ⁺ reveals the presence of two molecular species that may represent intermediates in the PLM biosynthesis pathway: single-branched circles (-structures) and PLM with single-stranded DNA tails. While Gam-mediated PLM synthesis in sbcB mutants depends on the activity of the RecF pathway genes, Red-mediated PLM synthesis, like Red-mediated recombination, is independent of recA and recF activities. One of the red ⁺ products, protein, suppresses RecA deficiency in plasmid recombination and PLM synthesis in RecBCD^– Exol^– cells. The dependence of PLM synthesis on the RecE, RecF or Red recombination pathways and the dependence of plasmid recombination by these pathways on activities that are required for plasmid replication support the proposal that PLM synthesis and recombination by these pathways are mutually dependent. We propose the hypothesis that DNA double-stranded ends, which are produced in the process of PLM synthesis, are involved in plasmid recombination by the RecE, RecF and Red pathways. Conversely, recombination-dependent priming of DNA synthesis at 3 singles-tranded DNA ends is hypothesized to initiate PLM synthesis on circular plasmid DNA templates.Abbreviations PLM plasmid linear multimers - BUDR 5-bromo-2-deoxyuridine - bp base pair     

Chromosomal genes essential for stable maintenance of the mini-F plasmid in Escherichia coli

We have isolated mutants of Escherichia coli which do not support stable maintenance of mini-F plasmids (delta ccd rep+ sop+). These host mutations, named hop, were classified into five linkage groups on the E. coli chromosome. Genetic analyses of these hop mutations by Hfr mating and P1 transduction showed their loci on the E. coli genetic map to be as follows: hopA in the gyrB-tnaA region, hopB in the bglB-oriC region, hopD between 8 and 15 min, and hopE in the argA-thyA region. Kinetics of stability of the sop+ and delta sop mini-F plasmids in these hop mutants suggest that the hopA mutants are defective in partitioning of mini-F rather than in plasmid replication. The hopB, hopC, and hopD mutants were partially defective in replication of mini-F. The physical structure of the plasmid DNA was normal in hopA, B, C, and D mutants. Large amounts of linear multimers of plasmid DNA accumulated in mutants of the fifth linkage group (hopE). None of the hop mutations in any linkage group affected the normal growth of cells.     

Recombination-dependent recircularization of linearized pBR322 plasmid DNA following transformation of Escherichia coli

Summary Monomeric pBR322 DNA that had been linearized at its unique SalI site transformed wild-type Escherichia coli with 10² to 10³ times less efficiency than CCC plasmid DNA. Dose-response experiments indicated that a single linear plasmid molecule was sufficient to produce a transformant. Transformation with linearized pBR322 DNA was reduced 10 to 40 fold in recA ^–, recBC ^– or recF ^– backgrounds. In contrast, transformation with CCC DNA was unaffected by the rec status of the host. Transformation with linear pBR322 DNA was increased 3-fold in a DNA ligase-overproducing (lop11) mutant and decreased to a similar degree by transient inactivation of ligase in a ligts7 mutant.A proportion (ranging from about 9% in the wild-type to 42% in a recBC, lop11 mutant) of the transformants obtained with SalI-linearized pBR322 monomeric DNA contained deleted plasmids. Deletion rates were generally higher in rec ^– strains. Dephosphorylation of the termini on linear DNA or the creation of blunt-ended pBR322 molecules (by end-filling the SalI 5 protrusions or by cleavage with PvuII) decreased the transformation frequencywhilst increasing the deletion rate.Linear pBR322 dimeric DNA gave transformation frequencies in recA ⁺ and recA ^– strains that were reduced only 3 to 7 fold respectively relative to frequencies obtained with dimeric CCC DNA. Furthermore, in contrast to transformation with linear monomeric DNA, deletions were not observed.We propose that the majority of transformants arise, not by simple intracellular reannealing and ligation of the two cohesive SelI-termini of a linear molecule, but by intramolecular recombination. Deleted plasmids could be generated therefore during recyclization caused by recombination between short directly repeated sequences within a pBR322 monomer. We suggest that perfectly recircularized monomeric pBR322 molecules, which are found in the majority of transformants, arise primarily by intramolecular recombinational resolution of head-to-tail linear pBR322 dimers. Such linear oligomeric forms are created during preparation of linearized plasmid DNA by annealing of the SalI cohesive termini and constitute a variable proportion of the total molecules present.     

Gene conversion in the Escherichia coli RecF pathway: a successive half crossing-over model.

Summary Gene conversion - apparently non-reciprocal transfer of sequence information between homologous DNA sequences - has been reported in various organisms. Frequent association of gene conversion with reciprocal exchange (crossing-over) of the flanking sequences in meiosis has formed the basis of the current view that gene conversion reflects events at the site of interaction during homologous recombination. In order to analyze mechanisms of gene conversion and homologous recombination in an Escherichia coli strain with an active RecF pathway (recBC sbcBC), we first established in cells of this strain a plasmid carrying two mutant neo genes, each deleted for a different gene segment, in inverted orientation. We then selected kanamycin-resistant plasmids that had reconstituted an intact neo ⁺ gene by homologous recombination. We found that all the neo ⁺ plasmids from these clones belonged to the gene-conversion type in the sense that they carried one neo ⁺ gene and retained one of the mutant neo genes. This apparent gene conversion was, however, only very rarely accompanied by apparent crossing-over of the flanking sequences. This is in contrast to the case in a rec ⁺ strain. or in a strain with an active RecE pathway (recBC sbcA). Our further analyses, especially comparisons with apparent gene conversion in the rec ⁺ strain, led us to propose a mechanism for this biased gene conversion. This successive half crossing-over model proposes that the elementary recombinational process is half crossing;-over in the sense that it generates only one recombinant DNA duplex molecule, and leaves one or two free end(s), out of two parental DNA duplexes. The resulting free end is, the model assumes, recombinogenic and frequently engages in a second round of half crossing-over with the recombinant duplex. The products resulting from such interaction involving two molecules of the plasmid would be classified as belonging to the gene-conversion type without crossing-over. We constructed a dimeric molecule that mimics the intermediate form hypothesized in this model and introduced it into cells. Biased gene conversion products were obtained in this reconstruction experiment. The half crossing-over mechanism can also explain formation of huge linear multimers of bacterial plasmids, the nature of transcribable recombination products in bacterial conjugation, chromosomal gene conversion not accompanied by flanking exchange (like that in yeast mating-type switching), and antigenic variation in microorganisms.     

The recF-dependent endonuclease from Escherichia coli K12. Formation and resolution of pBR322 DNA multimers

Summary The instability of supercoiled pBR322 DNA obtained from different cells has been investigated. Partially purified plasmid DNA species from rec ⁺, recA and recBC sbcB cells are converted in vitro first to relaxed and then to linear molecules. The recA and recBC sbcB cells produce the best conditions for the monomerization of the pBR322 DNA and the stable maintenance of plasmids. The supercoiled pBR322 DNA from the recBC sbcB recF144 cells has been isolated preferentially in multimeric from (circular oligomers). These DNA forms are not converted to plasmid monomers and are converted to linear molecules three-fold slower than the monomer linearization in the case of the recBC sbcB cells.On the other hand, incubation of the pure pBR322 DNA with the recF-dependent protein Z (Krivonogov and Novitskaja 1982) results in the ATP-independent conversion of supercoiled plasmid DNA to relaxed and linear molecules. These results demonstrate an endonuclease activity of the recF-controlled protein Z, which may be involved in general recA-dependent recombination and formation of the pBR322 monomers in the cell.The results also show that the recF144 mutation in recBC sbcB recF and recF cells leads to the absence of detectable amounts of a 49,000 molecular weight protein.     

Roles of Escherichia coli heat shock proteins DnaK, DnaJ and GrpE in mini-F plasmid replication

Summary A subset of Escherichia coli heat shock proteins, DnaK, DnaJ and GrpE were shown to be required for replication of mini-F plasmid. Strains of E. coli K12 carrying a missense mutation or deletion in the dnaK, dnaJ, or grpE gene were virtually unable to be transformed by mini-F DNA at the temperature (30° C) that permits cell growth. When excess amounts of the replication initiator protein (repE gene product) of mini-F were provided by means of a multicopy plasmid carrying repE, these mutant bacteria became capable of supporting mini-F replication under the same conditions. However, the copy number of a high copy number mini-F plasmid was reduced in these mutant bacteria as compared with the wild type in the presence of excess RepE protein. Furthermore, mini-F plasmid mutants that produce altered initiator protein and exhibit a very high copy number were able to replicate in strains deficient in any of the above heat shock proteins. These results indicate that the subset of heat shock proteins (DnaK, DnaJ and GrpE) play essential roles that help the functioning of the RepE initiator protein in mini-F DNA replication.     

Different UmuC requirements for generation of different kinds of UV-induced mutations in Escherichia coli

An Escherichia coli strain bearing the dnaQ49 mutation, which results in a defective s subunit of DNA polymerase III, and carrying the lexA71 mutation, which causes derepression of the SOS regulon, is totally unable to maintain high-copy-number plasmids containing the umuDC operon. The strain is also unable to maintain the pAN4 plasmid containing a partial deletion of the umuD gene but retaining the wild-type umuC gene. These results suggest that a high cellular level of UmuC is exceptionally harmful to the defective DNA polymerase III of the dnaQ49 mutant. We have used this finding as a basis for selection of new plasmid umuC mutants. The properties of two such mutants, bearing the umuC61 or umuC95 mutation, are described in detail. In the umuC122:: Tn 5 strain harbouring the mutant plasmids, UV-induced mutagenesis is severely decreased compared to that observed with the parental umuDC ⁺ plasmid. Interestingly, while the frequency of UV-induced GC AT transitions is greatly reduced, the frequency of AT TA transversions is not affected. Both mutant plasmids bear frameshift mutations within the same run of seven A residues present in umuC ⁺; in umuC61 the run is shortened to six A whereas in umuC95 is lengthened to eight A. We have found in both umuC61 and umuC95 that translation is partially restored to the proper reading frame. We propose that under conditions of limiting amounts of UmuC, the protein preferentially facilitates processing of only some kinds of UV-induced lesions.     

Self cloning in Micromonospora olivasterospora of fms genes for fortimicin A (astromicin) biosynthesis.

Summary We have cloned the seven genes that are responsible for biosynthesis of the antibiotic fortimicin A (FTM A) using a recently developed self-cloning system that employs the plasmid vector pMO116 for Micromonospora olivasterospora. Five chimeric plasmids that restored FTM A production in M. olivasterospora mutants blocked at different biosynthetic steps were isolated by shotgun cloning. Secondary transformation using other non-producing mutants showed that two additional FTM A biosynthetic genes were included on these plasmids, and that at least four of the genes were clustered. Interestingly AN38-1, a non-producing mutant that had a defect in dehydroxylation of a precursor of FTM A, was complemented by the DNA fragment containing a neomycin resistance gene that had been cloned from a neomycin-producing strain (Micromonospora sp. FTM A non-producing strain) in the course of constructing the plasmid vector pM0116. These results clearly show that this novel gene cloning system in Micromonospora is of practical use.     

Plasmid-mediated control of nodulation in Rhizobium trifolii

The nodulation ability was effectively eliminated from different Rhizobium trifolii strains incubated at elevated temperature (urkowski and Lorkiewicz, 1978). Non-nodulating (Nod^-) mutants were stable and no reversion of Nod^- to Nod⁺ phenotype was observed. Strains R. trifolii 24 and T12 which showed a high percentage of elimination of nodulation ability were examined in detail. Two plasmids were detected in strain 24 using neutral and alkaline sucrose gradient centrifugation of plasmid preparations. Molecular weights of the plasmids pWZ1 and pWZ2 were 460 Mdal and 190 Mdal, respectively. Rhizobium lysates labeled with ³H-thymidine and ultracentrifuged in caesium chloride — ethidium bromide gradients demonstrated a 40% reduction of the plasmid DNA content in R. trifolii 24 Nod^- mutants in comparison with the nodulating wild type strain 24. It was found further that non-nodulation of mutants 24 Nod^- was due to the absence of plasmid pWZ2. Sucrose gradient data also demonstrated that strain T12 contained two plasmids with molecular weights corresponding to those of pWZ1 and pWZ2, respectively. In Nod^- mutant clones derived from strain T12, pWZ2 plasmid was missing.Non Standard Abbreviations CCC covalently closed circular - OC open cirucular - Sarkosyl sodium N-lauroylsarcosinate     

Interdependence and nodule specificity of cis-acting regulatory elements in the soybean leghemoglobin lbc3 and N23 gene promoters

Summary A composite plasmid comprising the mini-F and pBR322 replicons was found to inhibit cell growth of a host with conditional mutations in dnaA and rnh under restrictive conditions, where the normal initiation of replication from oriC was inactivated, but the alternative replication initiation from oriK was active. It was further shown that the composite plasrnid inhibited stable DNA replication (SDR) which occurs constitutively in cells mutant for rnh. Neither pBR322 nor mini-F alone produced these inhibitory effects. Deletion analyses revealed that the mini-F segment responsible for the inhibition of both processes was the promoter region of the sopA gene which had been cloned into a site upstream of the bla gene on pBR322 in such an orientation as to cause overexpression of bla. Inserting the promoter of the Escherichia coli lac gene into the same site had the same effect. Introduction of a deletion and a frameshift mutation into bla abolished the inhibition. Thus, the inhibition of growth and SDR appear to be due to overproduction of the bla gene product, -lactamase.