Pattern of action of Bacillus stearothermophilus neopullulanase on pullulan.

The action of neopullulanase from Bacillus stearothermophilus on many oligosaccharides was tested. The enzyme hydrolyzed not only alpha-(1----4)-glucosidic linkages but also specific alpha-(1----6)-glucosidic linkages of several branched oligosaccharides. When pullulan was used as a substrate, panose, maltose, and glucose, in that order, were produced as final products at a final molar ratio of 3:1:1. According to these results, we proposed a model for the pattern of action of neopullulanase on pullulan as follows. In the first step, the enzyme hydrolyzes only alpha-(1----4)-glucosidic linkages on the nonreducing side of alpha-(1----6) linkages of pullulan and produces panose and several intermediate products composed of some panose units. In the second step, taking 6(2)-O-alpha-(6(3)-O-alpha-glucosyl-maltotriosyl)-maltose as an example of one of the intermediate products, the enzyme hydrolyzes either alpha-(1----4) (the same position as that described above) or alpha-(1----6) linkages and produces panose or 6(3)-O-alpha-glucosyl-maltotriose plus maltose, respectively. In the third step, the alpha-(1----4) linkage of 6(3)-O-alpha-glucosyl-maltotriose is hydrolyzed by the enzyme, and glucose and another panose are produced. To confirm the model of the pattern of action, we extracted intermediate products produced from pullulan by neopullulanase and analyzed the structures by glucoamylase, pullulanase, and neopullulanase analyses. The experimental results supported the above-mentioned model of the pattern of action of neopullulanase on pullulan.     

Purification and Characterization of Thermostable Pullulanase from Bacillus stearothermophilus and Molecular Cloning and Expression of the Gene in Bacillus subtilis

A thermostable pullulanase (alpha-dextrin 6-glucanohydrolase [EC 3.2.1.41]) from a newly isolated Bacillus stearothermophilus strain (TRS128) was purified and characterized. The enzyme hydrolyzed (1-->6)-alpha-d-glucosidic linkages of pullulan to produce maltotriose, and the optimum temperature was 65 degrees C. About 90% of the enzyme activity was retained after treatment at 65 degrees C for 60 min. By using pTB522 as a vector plasmid, the pullulanase gene was cloned and expressed in Bacillus subtilis.     

Catalytic properties of the cloned amylase from Bacillus licheniformis.

A gene encoding a new amylolytic enzyme of Bacillus licheniformis (BLMA) has been cloned, and we characterized the enzyme expressed in Escherichia coli. The genomic DNA of B. licheniformis was double-digested with EcoRI and BamHI and ligated the pBR322. The transformed E. coli was selected by its amylolytic activity, which carries the recombinant plasmid pIJ322 containing a 3.5-kilobase fragment of B. licheniformis DNA. The purified enzyme encoded by pIJ322 was capable of hydrolyzing pullulan and cyclodextrin as well as starch. It was active over a pH range of 6-8 and its optimum temperature was 50 degrees C. The molecular weight of the enzyme was 64,000, and the isoelectric point was 5.4. It degraded soluble starch by cleaving maltose units preferentially but did not attack alpha-1,6-linkage. The enzyme also hydrolyzed pullulan to panose units exclusively. In the presence of glucose, however, it transferred the panosyl moiety to glucose with the formation of alpha-1,6-linkage. The specificity of transferring activity is evident from the result of the maltosyl-transferring reaction which produces isopanose from maltotriose and glucose. The molecular structure of the enzyme deduced from the nucleotide sequence of the clone maintains limited similarity in the conserved regions to the other amylolytic enzymes.     

Physiological and enzymatic characterization of a novel pullulan-degrading thermophilic Bacillus strain 3183

Summary A new thermophilic Bacillus strain 3183 (ATCC 49341) was isolated from hot-spring sediments. The organism grew on pullulan as a carbon source and showed optimum pH and temperature at pH 5.5 and 62° C, respectively, for growth. The strain reduced nitrate to nitrite both aerobically and anaerobically. It produced extracellular thermostable pullulanase and saccharidase activities which degraded pullulan and starch into maltotriose, maltose, and glucose. Medium growth conditions for pullulanase production were optimized. The optimum pH and temperature for pullulanase activity were at pH 6.0 and 75° C, respectively. The enzyme was stable at pH 5.5-7.0 and temperature up to 70° C in the absence of substrate. The K _m for pullulan at pH 6.0 and 75° C was 0.4 mg/ml. The pullulanase activity was stimulated and stabilized by Ca²⁺. It was inhibited by ethylenediaminetetraacetate (EDTA), beta and gamma-cyclodextrins but not by alpha-cyclodextrin and reagents that inhibit essential enzyme SH-groups. Offprint requests to: B. C. Saha     

蜡样芽胞杆菌GXBC-3三个普鲁兰酶基因的表达及其酶学特性

探索获得优良的新型普鲁兰酶基因,丰富普鲁兰酶理论,对实现普鲁兰酶国产化具有重要意义。分析GenBank数据库中蜡样芽胞杆菌假定Ⅰ型、Ⅱ型普鲁兰酶基因序列,从实验室保藏的蜡样芽胞杆菌Bacilluscereus GXBC-3中克隆得到3个普鲁兰酶基因pulA、pulB、pulC,并分别导入大肠杆菌进行胞内诱导表达。纯化重组酶酶学性质研究表明重组酶PulA能水解α-l,6-和α-l,4-糖苷键,为Ⅱ型普鲁兰酶,以普鲁兰糖为底物时,最适反应温度及pH分别为40℃和6.5,比活力为32.89 U/mg;以可溶性淀粉为底物时,最适反应温度及pH分别为50℃和7.0,比活力为25.71 U/mg。重组酶PulB和PulC二者均只能水解α-l,6-糖苷键,为I型普鲁兰酶,以普鲁兰糖为底物时,其最适反应温度及pH分别为45℃、7.0和45℃、6.5,比活力分别为228.54 U/mg和229.65 U/mg。     

A new thermoactive pullulanase from Desulfurococcus mucosus: cloning, sequencing, purification, and characterization of the recombinant enzyme after expression in Bacillus subtilis

The gene encoding a thermoactive pullulanase from the hyperthermophilic anaerobic archaeon Desulfurococcus mucosus (apuA) was cloned in Escherichia coli and sequenced. apuA from D. mucosus showed 45.4% pairwise amino acid identity with the pullulanase from Thermococcus aggregans and contained the four regions conserved among all amylolytic enzymes. apuA encodes a protein of 686 amino acids with a 28-residue signal peptide and has a predicted mass of 74 kDa after signal cleavage. The apuA gene was then expressed in Bacillus subtilis and secreted into the culture fluid. This is one of the first reports on the successful expression and purification of an archaeal amylopullulanase in a Bacillus strain. The purified recombinant enzyme (rapuDm) is composed of two subunits, each having an estimated molecular mass of 66 kDa. Optimal activity was measured at 85 degrees C within a broad pH range from 3.5 to 8.5, with an optimum at pH 5.0. Divalent cations have no influence on the stability or activity of the enzyme. RapuDm was stable at 80 degrees C for 4 h and exhibited a half-life of 50 min at 85 degrees C. By high-pressure liquid chromatography analysis it was observed that rapuDm hydrolyzed alpha-1,6 glycosidic linkages of pullulan, producing maltotriose, and also alpha-1,4 glycosidic linkages in starch, amylose, amylopectin, and cyclodextrins, with maltotriose and maltose as the main products. Since the thermoactive pullulanases known so far from Archaea are not active on cyclodextrins and are in fact inhibited by these cyclic oligosaccharides, the enzyme from D. mucosus should be considered an archaeal pullulanase type II with a wider substrate specificity.     

Cloning, expression and biochemical characterisation of a unique thermostable pullulan-hydrolysing enzyme from the hyperthermophilic archaeon Thermococcus aggregans

The gene for a new type of pullulan hydrolase from the hyperthermophilic archaeon Thermococcus aggregans was cloned and expressed in Escherichia coli. The 2181-bp open reading frame encodes a protein of 727 amino acids. A hypothetical membrane linker region was found to be cleaved during processing in E. coli. The recombinant enzyme was purified 70-fold by heat treatment, affinity and anion exchange chromatography. Optimal activity was detected at 95 degrees C at a broad pH range from 3.5 to 8.5 with an optimum at pH 6.5. More than 35% of enzymatic activity was detected even at 120 degrees C. The enzyme was stable at 90 degrees C for several hours and exhibited a half-life of 2.5 h at 100 degrees C. Unlike all pullulan-hydrolysing enzymes described to date, the enzyme is able to attack alpha-1,6- as well as alpha-1,4-glycosidic linkages in pullulan leading to the formation of a mixture of maltotriose, panose, maltose and glucose. The enzyme is also able to degrade starch, amylose and amylopectin forming maltotriose and maltose as main products.     

Extracellular expression of pullulanase from Bacillus naganoensis in Escherichia coli

The pullulanase encoding gene from Bacillus naganoensis was successfully overexpressed in Escherichia coli both intracellularly and extracellularly using expression vector pET22b (+). The distribution of recombinant protein was significantly affected by temperature and carbon and nitrogen sources. The highest levels of extracellular and intracellular production of the target protein were observed at 25 and 20 °C, respectively. The addition of maltose, dextrin, pullulan, and soluble starch to the culture medium caused significant increases in the extracellular yield of pullulanase, while glucose strongly inhibited pullulanase production. The results show that the optimal conditions for maximum yield of extracellular pullulanase required high levels of carbon source and a limited nitrogen supply, while low concentrations of carbon and nitrogen source favored intracellular pullulanase expression. High concentrations of nitrogen source strongly inhibited the production of pullulanase.     

Molecular characterization of a dimeric intracellular maltogenic amylase of Bacillus subtilis SUH4-2

An additional amylase besides the typical alpha-amylase was detected in the cytoplasm of Bacillus subtilis SUH4-2, an isolate from Korean soil. The corresponding gene encoded a maltogenic amylase, which hydrolyzed cyclodextrin or starch to maltose and glucose; pullulan to panose; acarbose to glucose and acarviosine-glucose. Maltogenic amylase of B. subtilis SUH4-2 transferred sugar molecules to form various branched oligosaccharides upon the hydrolysis of substrates. The enzyme existed in a monomer-dimer equilibrium with a molar ratio of 3:2 in 50 mM KH(2)PO(4)-NaOH buffer (pH 7.0). The maltogenic amylase is most likely to be associated with carbohydrate metabolism in the cytoplasm, since the nucleotide sequence of the gene was highly homologous to the yvdF gene of B. subtilis 168, which is located in a gene cluster involved in maltose/maltodextrin utilization.     

Effect of carbon source and dissolved oxygen level on cell growth and pullulanase production byBacillus stearothermophilus G-82

Cell growth and extracellular pullulanase production ofBacillus stearothermophilus G-82 were investigated in batch culture using a defined medium with glucose, maltose, pullulan or amylopectin as carbon source. Maximum enzyme activity was with pullulan or amylopectin. Cell growth in batch culture was better under oxygen unlimited conditions, while higher total and specific enzyme activities, using pullulan or amylopectin, were obtained in oxygen-limited conditions. Enzyme accumulation took place in the late growth phase. The highest enzyme production of 300 U/I was reached when pullulan was used as carbon source in conditions of oxygen limitation.     

Characterization of a neopullulanase and an alpha-glucosidase from Bacteroides thetaiotaomicron 95-1.

Previously, we constructed a gene disruption in the pullulanase I gene of Bacteroides thetaiotaomicron 5482A. This mutant, designated B. thetaiotaomicron 95-1, had a lower level of pullulanase specific activity than did wild-type B. thetaiotaomicron but still exhibited a substantial amount of pullulanase activity. Characterization of the remaining pullulanase activity present in B. thetaiotaomicron 95-1 has identified an alpha(1----4)-D-glucosidic bond cleaving pullulanase which has been tentatively designated a neopullulanase. The neopullulanase (pullulanase II) is a 70-kDa soluble protein which cleaves alpha(1----4)-D-glucosidic bonds in pullulan to produce panose. The neopullulanase also cleaved alpha(1----4) bonds in amylose and in oligosaccharides of maltotriose through maltoheptaose in chain length. An alpha-glucosidase from B. thetaiotaomicron 95-1 was characterized. The alpha-glucosidase was partially purified to a preparation containing three proteins of 80, 57, and 50 kDa. Pullulan and amylose were not hydrolyzed by the alpha-glucosidase. alpha(1----4)-D-Glucosidic oligosaccharides from maltose to maltoheptaose were hydrolyzed to glucose by the alpha-glucosidase. The alpha-glucosidase also hydrolyzed alpha(1----6)-linked oligosaccharides such as panose (the product of the pullulanase II action on pullulan) and isomaltotriose.     

Pullulan 4-glucanohydrolase from Aspergillus niger

Pullulan 4-glucanohydrolase, a novel pullulan-hydrolyzing enzyme from Aspergillus niger, was highly purified by means of acetone precipitation, chromatography on P-cellulose and DEAE-cellulose, and gel filtration on Sephadex G-150. More than 430-fold purification was achieved through these procedures from crude extract of wheat bran culture. The enzyme can liberate a large amount of isopanose and a small amount of tetrasaccharide from pullulan. The optimum pH of the enzyme action on pullulan was 3.0–3.5 and the optimum temperature was 40 °C at pH 3.5. The enzyme activity remained intact after heating at 50 °C for 30 min at pH 3.7–4.5. The enzyme was stable at pH 2.0–8.0 on storage at 5 °C for 24 hr. The purified enzyme attacked reducing end α-1,4-glucosidic linkages adjacent to α-1,6-glucosidic linkages in pullulan, 6³-α-glucosylmaltotriose, 6²-α-maltosylmaltose and panose, to liberate isopanose, isomaltose and maltose, isopanose and glucose, and isomaltose and glucose, respectively. The molecular weight of the enzyme determined by gel filtration on Bio-Gel P-150 was about 74,000.     

Cloning of the pullulanase gene and overproduction of pullulanase in Escherichia coli and Klebsiella aerogenes

The pullulanase gene (pul) of Klebsiella aerogenes was cloned into a pBR322 vector in Escherichia coli. Deletion analysis of the recombinant plasmid showed that the pul coding sequence, probably with the regulator gene, was located entirely within a 4.2-kilobase segment derived from the chromosomal DNA of K. aerogenes. E. coli cells carrying the recombinant plasmids produced about three- to sevenfold more pullulanase than did the wild-type strain of K. aerogenes W70. When the cloned cells of E. coli were grown with pullulan or maltose, most pullulanase was produced intracellularly, whereas K. aerogenes produced pullulanase extracellularly. Transfer of the plasmid containing the pul gene into K. aerogenes W70 resulted in about a 20- to 40-fold increase in total production of pullulanase, and the intracellular enzyme level was about 100- to 150-fold higher than that of the parent strain W70. The high level of pullulanase activity in K. aerogenes cells carrying the recombinant plasmid was maintained for at least 2 weeks.     

Cloning of the pullulanase gene and overproduction of pullulanase in Escherichia coli and Klebsiella aerogenes.

The pullulanase gene (pul) of Klebsiella aerogenes was cloned into a pBR322 vector in Escherichia coli. Deletion analysis of the recombinant plasmid showed that the pul coding sequence, probably with the regulator gene, was located entirely within a 4.2-kilobase segment derived from the chromosomal DNA of K. aerogenes. E. coli cells carrying the recombinant plasmids produced about three- to sevenfold more pullulanase than did the wild-type strain of K. aerogenes W70. When the cloned cells of E. coli were grown with pullulan or maltose, most pullulanase was produced intracellularly, whereas K. aerogenes produced pullulanase extracellularly. Transfer of the plasmid containing the pul gene into K. aerogenes W70 resulted in about a 20- to 40-fold increase in total production of pullulanase, and the intracellular enzyme level was about 100- to 150-fold higher than that of the parent strain W70. The high level of pullulanase activity in K. aerogenes cells carrying the recombinant plasmid was maintained for at least 2 weeks.     

Isolation and characterization of Schwanniomyces alluvius amylolytic enzymes

The extracellular amylolytic enzymes of Schwanniomyces alluvius were studied to determine future optimization of this yeast for the production of industrial ethanol from starch. Both alpha-amylase and glucoamylase were isolated and purified. alpha-Amylase had an optimum pH of 6.3 and was stable from pH 4.5 to 7.5. The optimum temperature for the enzyme was 40 degrees C, but it was quickly inactivated at temperatures above 40 degrees C. The Km for soluble starch was 0.364 mg/ml. The molecular weight was calculated to be 61,900 +/- 700. alpha-Amylase was capable of releasing glucose from starch, but not from pullulan. Glucoamylase had an optimum pH of 5.0 and was stable from pH 4.0 to greater than 8.0. The optimum temperature for the enzyme was 50 degrees C, and although less heat sensitive than alpha-amylase, it was quickly inactivated at 60 degrees C. Km values were 12.67 mg/ml for soluble starch and 0.72 mM for maltose. The molecular weight was calculated to be 155,000 +/- 3,000. Glucoamylase released only glucose from both soluble starch and pullulan. S. alluvius is one of the very few yeasts to possess both alpha-amylase and glucoamylase as well as some fermentative capacity to produce ethanol.     

Isolation and characterization of Schwanniomyces alluvius amylolytic enzymes.

The extracellular amylolytic enzymes of Schwanniomyces alluvius were studied to determine future optimization of this yeast for the production of industrial ethanol from starch. Both alpha-amylase and glucoamylase were isolated and purified. alpha-Amylase had an optimum pH of 6.3 and was stable from pH 4.5 to 7.5. The optimum temperature for the enzyme was 40 degrees C, but it was quickly inactivated at temperatures above 40 degrees C. The Km for soluble starch was 0.364 mg/ml. The molecular weight was calculated to be 61,900 +/- 700. alpha-Amylase was capable of releasing glucose from starch, but not from pullulan. Glucoamylase had an optimum pH of 5.0 and was stable from pH 4.0 to greater than 8.0. The optimum temperature for the enzyme was 50 degrees C, and although less heat sensitive than alpha-amylase, it was quickly inactivated at 60 degrees C. Km values were 12.67 mg/ml for soluble starch and 0.72 mM for maltose. The molecular weight was calculated to be 155,000 +/- 3,000. Glucoamylase released only glucose from both soluble starch and pullulan. S. alluvius is one of the very few yeasts to possess both alpha-amylase and glucoamylase as well as some fermentative capacity to produce ethanol.     

一种新型淀粉酶的鉴定及其产酶菌株的筛选

对筛选到的菌株ZX99产生的一种新型淀粉酶（异麦芽低聚糖酶）进行了分析鉴定,ZX99菌株能产生一种胞外淀粉酶,该酶能催化淀粉的降解产生异麦芽低聚糖,对原产酶菌株ZX99多次进行紫外线照射诱变后,获得了优良,稳定的变异菌株RB3．232,其产酶水平为原株的160％,产物薄层层析证明,该酶能催化淀粉的降解,产生异麦芽糖,潘糖,异麦芽三糖和异麦芽四糖等低聚糖,但对普鲁兰基本不起作用,由此证明它是一种不同于新型普鲁兰酶（nepullulanase)和 传统淀粉酶（amylase)的一种新型淀粉酶。     

Purification and characterization of an intracellular cycloalternan-degrading enzyme from Bacillus sp. NRRL B-21195

A novel intracellular cycloalternan-degrading enzyme (CADE) was purified to homogeneity from the cell pellet of Bacillus sp. NRRL B-21195. The enzyme has a molecular mass of 125 kDa on SDS-PAGE. The pH optimum was 7.0, and the enzyme was stable from pH 6.0 to 9.2. The temperature optimum was 35 degrees C and the enzyme exhibited stability up to 50 degrees C. The enzyme hydrolyzed cycloalternan [CA; cyclo(-->6)-alpha-d-Glcp-(1-->3)-alpha-d-Glcp-(1-->6)-alpha-d-Glcp-(-->3)-alpha-d-Glcp-(1-->)] as the best substrate, to produce only isomaltose via an intermediate, alpha-isomaltosyl-(1-->3)-isomaltose. This enzyme also hydrolyzed isomaltosyl substrates, such as panose, alpha-isomaltosyl-(1-->4)-maltooligosaccharides, alpha-isomaltosyl-(1-->3)-glucose, and alpha-isomaltosyl-(1-->3)-isomaltose to liberate isomaltose. Neither maltooligosaccharides nor isomaltooligosaccharides were hydrolyzed by the enzyme, indicating that CADE requires alpha-isomaltosyl residues connected with (1-->4)- or (1-->3)-linkages. The K(m) value of cycloalternan (1.68 mM) was 20% of that of panose (8.23 mM). The k(cat) value on panose (14.4s(-1)) was not significantly different from that of cycloalternan (10.8 s(-1)). Judging from its specificity, the systematic name of the enzyme should be cycloalternan isomaltosylhydrolase. This intracellular enzyme is apparently involved in the metabolism of starch via cycloalternan in Bacillus sp. NRRL B-21195, its role being to hydrolyze cycloalternan inside the cells.     

Purification and characterization of maltose phosphorylase from Bacillus sp. RK-1

Bacillus sp. RK-1 was isolated as a bacterium that produced maltose phosphorylase (MPase) in the culture supernatant. Screening was done from among about 400 isolates that could grow at 55 degrees C in a medium containing maltose as the sole carbon source. The enzyme was purified to an electrophoretically homogeneous state and some properties were investigated. The Mr of the enzyme was estimated to be 170 kDa by gel filtration and 88.5 kDa by SDS-PAGE, suggesting that it consisted of two identical subunits. The enzyme showed optimum activity around pH 6.0-7.0 and the optimum temperature was about 65 degrees C. The enzyme was stable in the range of pH 5.5-8.0 after keeping it at 4 degrees C for 24 h and retained the activity up to about 55 degrees C after keeping it for 15 min. This is the first report about an MPase that could be produced in the culture supernatant. Furthermore, these investigations showed that this MPase is one of the most thermostable ones reported so far.     

Purifications and Enzymatic Properties of β-Amylase and Pullulanase from Bacillus cereus var. mycoides

A β-amylase and a pullulanase produced by Bacillus cereus var. mycoides were purified by means of ammonium sulfate fractionation, adsorption on starch and celite and Sephadex G–100 column chromatography. The purified enzymes were homogeneous in disc electrophoresis.

The β-amylase released only maltose from amylose, amylopectin, starch and glycogen, and the released maltose was in β-form. The pullulanase released maltose, maltotriose and maltotetraose from β-limit dextrin and maltotriose from pullulan, but not amylose-like substance from amylopectin.

The optimum pHs of β-amylase and pullulanase were about 7 and 6~6.5, respectively. The optimum temperatures of the enzymes were about 50°C. The enzymes were inhibited by the sulfhydryl reagents such as mercuric chloride and p-chloromercuribenzoate, and the inhibitions with p-chloromercuribenzoate were restored by the addition of cysteine. The molecular weights of β-amylase and pullulanase were estimated to be 35,000±5,000 and 110,000±20,000, respectively.