Why the Long Face? The Mechanics of Mandibular Symphysis Proportions in Crocodiles

Background

Crocodilians exhibit a spectrum of rostral shape from long snouted (longirostrine), through to short snouted (brevirostrine) morphologies. The proportional length of the mandibular symphysis correlates consistently with rostral shape, forming as much as 50% of the mandible’s length in longirostrine forms, but 10% in brevirostrine crocodilians. Here we analyse the structural consequences of an elongate mandibular symphysis in relation to feeding behaviours.

Methods/Principal Findings

Simple beam and high resolution Finite Element (FE) models of seven species of crocodile were analysed under loads simulating biting, shaking and twisting. Using beam theory, we statistically compared multiple hypotheses of which morphological variables should control the biomechanical response. Brevi- and mesorostrine morphologies were found to consistently outperform longirostrine types when subject to equivalent biting, shaking and twisting loads. The best predictors of performance for biting and twisting loads in FE models were overall length and symphyseal length respectively; for shaking loads symphyseal length and a multivariate measurement of shape (PC1– which is strongly but not exclusively correlated with symphyseal length) were equally good predictors. Linear measurements were better predictors than multivariate measurements of shape in biting and twisting loads. For both biting and shaking loads but not for twisting, simple beam models agree with best performance predictors in FE models.

Conclusions/Significance

Combining beam and FE modelling allows a priori hypotheses about the importance of morphological traits on biomechanics to be statistically tested. Short mandibular symphyses perform well under loads used for feeding upon large prey, but elongate symphyses incur high strains under equivalent loads, underlining the structural constraints to prey size in the longirostrine morphotype. The biomechanics of the crocodilian mandible are largely consistent with beam theory and can be predicted from simple morphological measurements, suggesting that crocodilians are a useful model for investigating the palaeobiomechanics of other aquatic tetrapods.     

Comparative and developmental functional morphology of the jaws of living and fossil gars (Actinopterygii: Lepisosteidae)

The feeding mechanism of gars (Ginglymodi : Lepisosteidae) is characterized by cranial elevation and lower jaw rotation but minimal cranial kinesis. Gar jaws have numerous, sharply pointed, elongate teeth for capture of evasive prey. Their mandibles range from relatively short to extremely long depending on the species. Jaw length and lever dimensions were hypothesized to affect the biomechanics of force and motion during feeding, according to simple mechanical models of muscles exerting force through first- or third-order levers. A morphometric protocol was used to measure the jaw structure of seven living and five fossil species of gar and these data were used to calculate the mechanical advantage (a measure of force transmission) for both opening and closing of the mandible. Gars were found to possess low mechanical advantage (MA) and high transmission of motion, although gars occupy a range of biomechanical states across the continuum of force vs. velocity transmission. The long-nose gar, Lepisosteus osseus, has one of the lowest jaw closing MAs (0.05) ever measured in fishes. Intraspecific lever mechanics were also calculated for a developmental series (from feeding larvae to adults) of L. osseus and Atractosteus spatula. A characteristic ontogenetic curve in MA of the lower jaw was obtained, with a large decrease in MA between larva and juvenile, followed by a steady increase during adult growth. This curve correlates with a change in prey type, with the small, robust-jawed individuals feeding mainly on crustaceans and insects and the large, long-jawed individuals of all species becoming mainly piscivorous. Principal components analysis of functionally important morphometrics shows that several gar species occupy different regions of functional morphospace. Some fossil gar species are also placed within functional morphospace using this approach.     

The evolution of cranial form and function in theropod dinosaurs: insights from geometric morphometrics

Theropod dinosaurs, an iconic clade of fossil species including Tyrannosaurus and Velociraptor, developed a great diversity of body size, skull form and feeding habits over their 160+ million year evolutionary history. Here, we utilize geometric morphometrics to study broad patterns in theropod skull shape variation and compare the distribution of taxa in cranial morphospace (form) to both phylogeny and quantitative metrics of biting behaviour (function). We find that theropod skulls primarily differ in relative anteroposterior length and snout depth and to a lesser extent in orbit size and depth of the cheek region, and oviraptorosaurs deviate most strongly from the "typical" and ancestral theropod morphologies. Noncarnivorous taxa generally fall out in distinct regions of morphospace and exhibit greater overall disparity than carnivorous taxa, whereas large-bodied carnivores independently converge on the same region of morphospace. The distribution of taxa in morphospace is strongly correlated with phylogeny but only weakly correlated with functional biting behaviour. These results imply that phylogeny, not biting function, was the major determinant of theropod skull shape.     

Prey capture and processing behaviors vary with prey size and shape in Australian and subantarctic fur seals

When hunting at sea, pinnipeds should adapt their foraging behaviors to suit the prey they are targeting. We performed captive feeding trials with two species of otariid seal, Australian fur seals (Arctocephalus pusillus doriferus) and subantarctic fur seals (Arctocephalus tropicalis). This allowed us to record detailed observations of how their foraging behaviors vary when presented with prey items that cover the full range of body shapes and sizes encountered in the wild. Small prey were captured using suction alone, while larger prey items were caught in the teeth using raptorial biting. Small fish and long skinny prey items could then be swallowed whole or processed by shaking, while all prey items with body depths greater than 7.5 cm were processed by shaking at the water's surface. This matched opportunistic observations of feeding in wild Australian fur seals. Use of “shake feeding” as the main prey processing tactic also matches predictions that this method would be one of the only tactics available to aquatic tetrapods that are unable to secure prey using their forelimbs.     

Evolution of skull and mandible shape in cats (Carnivora: Felidae)

The felid family consists of two major subgroups, the sabretoothed and the feline cats, to which all extant species belong, and are the most anatomically derived of all carnivores for predation on large prey with a precision killing bite. There has been much controversy and uncertainty about why the skulls and mandibles of sabretoothed and feline cats evolved to become so anatomically divergent, but previous models have focused on single characters and no unifying hypothesis of evolutionary shape changes has been formulated. Here I show that the shape of the skull and mandible in derived sabrecats occupy entirely different positions within overall morphospace from feline cats, and that the evolution of skull and mandible shape has followed very different paths in the two subgroups. When normalised for body-size differences, evolution of bite forces differ markedly in the two groups, and are much lower in derived sabrecats, and they show a significant relationship with size and cranial shape, whereas no such relationship is present in feline cats. Evolution of skull and mandible shape in modern cats has been governed by the need for uniform powerful biting irrespective of body size, whereas in sabrecats, shape evolution was governed by selective pressures for efficient predation with hypertrophied upper canines at high gape angles, and bite forces were secondary and became progressively weaker during sabrecat evolution. The current study emphasises combinations of new techniques for morphological shape analysis and biomechanical studies to formulate evolutionary hypotheses for difficult groups.     

Allometry and performance: the evolution of skull form and function in felids

Allometric patterns of skull‐shape variation can have significant impacts on cranial mechanics and feeding performance, but have received little attention in previous studies. Here, we examine the impacts of allometric skull‐shape variation on feeding capabilities in the cat family (Felidae) with linear morphometrics and finite element analysis. Our results reveal that relative bite force diminishes slightly with increasing skull size, and that the skulls of the smallest species undergo the least strain during biting. However, larger felids are able to produce greater gapes for a given angle of jaw opening, and they have overall stronger skulls. The two large felids in this study achieved increased cranial strength by increasing skull bone volume relative to surface area. Allometry of skull geometry in large felids reflects a trade‐off between the need to increase gape to access larger prey while maintaining the ability to resist unpredictable loading when taking large, struggling prey.     

The biomechanical consequences of longirostry in crocodilians and odontocetes

Unrelated clades of aquatic tetrapod have evolved a similar range of skull shapes, varying from longirostrine (elongate and narrow rostrum) to brevirostrine (short rostrum). However, it is unclear which aspects of organismal performance are associated with this convergence in the range of skull shapes. Furthermore, it is not known how fundamental anatomical differences between groups influence these relationships. Here we address this by examining the load bearing capabilities of the skulls of two of the most diverse groups of living aquatic tetrapod: crocodilians and odontocetes. We use finite element analysis to examine the abilities of different cranial morphologies to resist a range of biologically relevant feeding loads including biting, shaking and twisting. The results allow for form/function relationships to be compared and contrasted between the two groups. We find that cranial shape has similar influences on performance during biting, shaking or twisting load cases at the anterior tooth positions, e.g. brevirostrine species experienced less strain than longirostrine species. The pattern of this form/function relationship is similar for both crocodilians and odontocetes, despite their fundamentally different anatomies. However, when loading teeth at the posterior end or middle of the tooth row the results do not follow the same pattern. Behavioural differences in bite location plays a key role in determining functional abilities in aquatic tetrapod taxa.     

The effects of biting and pulling on the forces generated during feeding in the Komodo dragon (Varanus komodoensis)

In addition to biting, it has been speculated that the forces resulting from pulling on food items may also contribute to feeding success in carnivorous vertebrates. We present an in vivo analysis of both bite and pulling forces in Varanus komodoensis, the Komodo dragon, to determine how they contribute to feeding behavior. Observations of cranial modeling and behavior suggest that V. komodoensis feeds using bite force supplemented by pulling in the caudal/ventrocaudal direction. We tested these observations using force gauges/transducers to measure biting and pulling forces. Maximum bite force correlates with both body mass and total body length, likely due to increased muscle mass. Individuals showed consistent behaviors when biting, including the typical medial-caudal head rotation. Pull force correlates best with total body length, longer limbs and larger postcranial motions. None of these forces correlated well with head dimensions. When pulling, V. komodoensis use neck and limb movements that are associated with increased caudal and ventral oriented force. Measured bite force in Varanus komodoensis is similar to several previous estimations based on 3D models, but is low for its body mass relative to other vertebrates. Pull force, especially in the ventrocaudal direction, would allow individuals to hunt and deflesh with high success without the need of strong jaw adductors. In future studies, pull forces need to be considered for a complete understanding of vertebrate carnivore feeding dynamics.     

It is all in the head: morphological basis for differences in bite force among colour morphs of the Dalmatian wall lizard

Males of the lizard Podarcis melisellensis occur in three distinct colours that differ in bite performance, with orange males biting harder than white or yellow ones. Differences in bite force among colour morphs are best explained by differences in head height, suggesting underlying variation in cranial shape and/or the size of the jaw adductors. To explore this issue further, we examined variation in cranial shape, using geometric morphometric techniques. Additionally, we quantified differences in jaw adductor muscle mass. No significant differences in size corrected head shape were found, although some shape trends could be detected between the colour morphs. Orange males have relatively larger jaw adductors than yellow males. Not only the mass of the external jaw adductors, but also that of the internal jaw adductors was greater for the orange morph. Data for other cranial muscles not related to biting suggest that this is not the consequence of an overall increase in robustness in orange individuals. These results suggest that differences in bite performance among morphs are caused specifically by an increase in the mass of the jaw adductor, which may be induced by differences in circulating hormone levels.  © 2009 The Linnean Society of London, Biological Journal of the Linnean Society , 2009, 96 , 13–22.     

An electromyographic analysis of the biting mechanism of the lemon shark,Negaprion Brevirostris: Functional and evolutionary implications

The kinetics of the head and function of select jaw muscles were studied during biting behavior in the lemon shark, Negaprion brevirostris. High speed cinematography and electromyography of seven cranial muscles were recorded during bites elicited by a probe to the oral cavity. In weak bites mandible depression was followed by mandible elevation and jaw closure without cranial elevation. In strong bites cranial elevation always preceded lower jaw depression, lower jaw elevation, and cranial depression. The average duration of the strong bites was rapid (176 msec), considering the size of the animal relative to other fishes. Different electromyographic patterns distinguished the two forms of bite, primarily in activity of the epaxial muscles, which effect cranial elevation. A composite reconstruction of the activity of seven cranial muscles during biting revealed that epaxial muscle activity and consequently cranial elevation preceded all other muscle activity. Mandible depression was primarily effected by contraction of the common coracoarcual and coracomandibularis, with assistance by the coracohyoideus. Simultaneous activity of the levator hyomandibulae is believed to increase the width of the orobranchial chamber. The adductor mandibulae dorsal was the primary jaw adductor assisted by the adductor mandibulae ventral. This biomechanically conservative mechanism for jaw opening in aquatic vertebrates is conserved, with the exception of the coracomandibularis, which is homologous to prehyoid muscles of salamanders.     

Disparity and Evolutionary Rate Do Not Explain Diversity Patterns in Muroid Rodents (Rodentia: Muroidea)

A positive correlation between diversity and disparity/evolutionary rate is predicted by multiple evolutionary theories. However, recent empirical studies in various taxa do not always find such an association. Similarly, we find no correlation between these two levels of variation, based on cranial morphometric data and molecular phylogenetic data from 317 muroid rodent species and dipodoid outgroups, analyzed using three-dimensional geometric morphometrics. This disassociation was found using both phylogenetic and non-phylogenetic approaches, indicating that an increase in clade richness is not necessarily followed by an increase in morphological divergence and vice versa. Furthermore, the distribution of muroid families in morphospace is highly overlapping suggesting greater variation within than between clades. Taken together with the observation that families with the most distinctive cranial morphologies (nesomyids, dipodids, and spalacids) are the least diverse, indicates that evolution of new cranial morphologies may not play an important role in the diversification of muroid rodents.     

A sharp incisor tool for predator house mice back to the wild

The house mouse (Mus musculus domesticus), as a successful invasive species worldwide, has to forage a variety of resources. Subantarctic mice display among the most notable diet shift from the usual omnivorous–granivorous diet, relying on a larger proportion of terrestrial animal prey. In agreement, a recent study of their mandible morphology evidenced an evolution of their mandible shape to optimize incisor biting and hence seize preys. Here, the incisors themselves are the focus of a morphometric analysis combined with a 3D study of their internal structure, aiming at a comparison between subantarctic populations (Guillou island, Kerguelen archipelago) with a range of western European continental, commensal mice. The predatory foraging behavior of Guillou mice was indeed associated with a sharper bevel of the lower incisor, which appears as an efficient morphology for piercing prey. The incisor of these mice also displays a reduced pulp cavity, suggesting slower eruption counterbalancing a reduced abrasion on such soft food material. The dynamics of the ever‐growing incisor may thus allow adaptive incisor sculpting and participate to the success of mice in foraging diverse resources.     

An Analysis of Some Predatory Behaviour Patterns in Four Species of Carnivorous Marsupials (Dasyuridae), with Comparative Notes on the Eutherian Cat Felis catus

Two aspects of predatory behaviour in five species of carnivorous mammals were studied: four species (Dasyurus viverrinus, Dasyurus hallucatus, Dasyuroides byrnei and Phascogale tapoatafa) of a group of Australian marsupials, Dasyuridae, and an eutherian, the domestic cat, Felis catus. All data were collected from captive animals in laboratory conditions. Using sequences of predatory behaviour recorded on movie film, two aspects of predation were compared: (a) attack strategy, that is, the behavioural patterns leading up to biting the prey, and (2) head shaking movements used during killing. All individual predators of all species but Dasyuroides byrnei exhibited avoidance of attacking prey from the front. Indeed, two of the four individual Dasyuroides used not only did not avoid frontal attack but selected to do so even when attacks from the rear or side were possible (e.g., the prey sat unmoving in the centre of the enclosure). Frontal attacks by Dasyuroides involved the use of the forepaws to grasp and pin prey, and the directing of killing bites to the head. These two behaviour patterns are also present in the other three species of dasyurids. Therefore, the frontal attack employed by this species does not involve the use of novel behaviour patterns. Analysis of head shakes revealed two basic forms. From a downward pointing position the head was rotated in one of two ways: the snout traversed an arc in space, as seen in Felis catus and Dasyurus hallucatus, or the sagittal crest traversed an arc in space, as seen in the other three species of dasyurids. When the prey is held down by the forepaws, either form of head shake enhances penetration of the canines into the prey, whereas, when not held down by the forepaws, both forms of head shake can disorient prey, enabling subsequent killing bites to be applied.     

Tail Biting in Pigs: Blood Serotonin and Fearfulness as Pieces of the Puzzle?

Tail biting in pigs is a widespread problem in intensive pig farming. The tendency to develop this damaging behaviour has been suggested to relate to serotonergic functioning and personality characteristics of pigs. We investigated whether tail biting in pigs can be associated with blood serotonin and with their behavioural and physiological responses to novelty. Pigs (n = 480) were born in conventional farrowing pens and after weaning at four weeks of age they were either housed barren (B) or in straw-enriched (E) pens. Individual pigs were exposed to a back test and novel environment test before weaning, and after weaning to a novel object (i.e. bucket) test in an unfamiliar arena. A Principal Component Analysis on behaviours during the tests and salivary cortisol (novel object test only) revealed five factors for both housing systems, labeled ‘Early life exploration’, ‘Near bucket’, ‘Cortisol’, ‘Vocalizations & standing alert’, and ‘Back test activity’. Blood samples were taken at 8, 9 and 22 weeks of age to determine blood platelet serotonin. In different phases of life, pigs were classified as tail biter/non-tail biter based on tail biting behaviour, and as victim/non-victim based on tail wounds. A combination of both classifications resulted in four pig types: biters, victims, biter/victims, and neutrals. Generally, only in phases of life during which pigs were classified as tail biters, they seemed to have lower blood platelet serotonin storage and higher blood platelet uptake velocities. Victims also seemed to have lower blood serotonin storage. Additionally, in B housing, tail biters seemed to consistently have lower scores of the factor ‘Near bucket’, possibly indicating a higher fearfulness in tail biters. Further research is needed to elucidate the nature of the relationship between peripheral 5-HT, fearfulness and tail biting, and to develop successful strategies and interventions to prevent and reduce tail biting.     

Ontogenetic shape changes in Pomacentridae (Teleostei,Perciformes) and their relationships with feeding strategies: a geometric morphometric approach

The present study explores the shape changes of cranial structures directly involved in food capturing during growth after reef settlement in two species of Pomacentridae (Dascyllus aruanus and Pomacentrus pavo). Landmark‐based geometric morphometrics were used to study allometric patterns and related shape changes in four skeletal units: neurocranium, suspensorium and opercle, mandible and premaxilla. At settlement, the larvae of both species have a relatively similar morphology, especially with respect to the mandible. Their shapes suggest a feeding mode defined as ram/suction‐feeding. Ontogenetic shape changes show a shift to a suction feeding mode of prey capture. The main transformations involved are an increase in height of the suspensorium and the opercle, an elevation of the supraoccipital crest, a relative shortening of the mandible, and a lengthening of the ascending process of the premaxilla. Shape changes of the mandible in the two studied species also reflect an increase of biting capacities. The high disparity between adult shape results from differences in the rate and in the length of ontogenetic trajectories, from divergence of the ontogenetic trajectories (neurocranium, mandible, and premaxilla) and parallel shifts of the trajectories in the size‐shape space (suspensorium and opercle). In an evolutionary context, allometric heterochronies during ontogeny of different skeletal unit of the head may be considered as a basis for the explanation of the diversity of damselfishes. © 2008 The Linnean Society of London, Biological Journal of the Linnean Society, 2008, 95 , 92–105.     

Estimation of Coast-Wide Population Trends of Marbled Murrelets in Canada Using a Bayesian Hierarchical Model

Species at risk with secretive breeding behaviours, low densities, and wide geographic range pose a significant challenge to conservation actions because population trends are difficult to detect. Such is the case with the Marbled Murrelet (Brachyramphus marmoratus), a seabird listed as ‘Threatened’ by the Species at Risk Act in Canada largely due to the loss of its old growth forest nesting habitat. We report the first estimates of population trend of Marbled Murrelets in Canada derived from a monitoring program that uses marine radar to detect birds as they enter forest watersheds during 923 dawn surveys at 58 radar monitoring stations within the six Marbled Murrelet Conservation Regions on coastal British Columbia, Canada, 1996–2013. Temporal trends in radar counts were analyzed with a hierarchical Bayesian multivariate modeling approach that controlled for variation in tilt of the radar unit and day of year, included year-specific deviations from the overall trend (‘year effects’), and allowed for trends to be estimated at three spatial scales. A negative overall trend of -1.6%/yr (95% credibility interval: -3.2%, 0.01%) indicated moderate evidence for a coast-wide decline, although trends varied strongly among the six conservation regions. Negative annual trends were detected in East Vancouver Island (-9%/yr) and South Mainland Coast (-3%/yr) Conservation Regions. Over a quarter of the year effects were significantly different from zero, and the estimated standard deviation in common-shared year effects between sites within each region was about 50% per year. This large common-shared interannual variation in counts may have been caused by regional movements of birds related to changes in marine conditions that affect the availability of prey.     

Better the devil you know: avian predators find variation in prey toxicity aversive

Toxic prey that signal their defences to predators using conspicuous warning signals are called ‘aposematic’. Predators learn about the toxic content of aposematic prey and reduce their attacks on them. However, through regulating their toxin intake, predators will include aposematic prey in their diets when the benefits of gaining the nutrients they contain outweigh the costs of ingesting the prey''s toxins. Predators face a problem when managing their toxin intake: prey sharing the same warning signal often vary in their toxicities. Given that predators should avoid uncertainty when managing their toxin intake, we tested whether European starlings (Sturnus vulgaris) preferred to eat fixed-defence prey (where all prey contained a 2% quinine solution) to mixed-defence prey (where half the prey contained a 4% quinine solution and the other half contained only water). Our results support the idea that predators should be more ‘risk-averse’ when foraging on variably defended prey and suggest that variation in toxicity levels could be a form of defence.     

Replicated divergence in cichlid radiations mirrors a major vertebrate innovation

Decoupling of the upper jaw bones—jaw kinesis—is a distinctive feature of the ray-finned fishes, but it is not clear how the innovation is related to the extraordinary diversity of feeding behaviours and feeding ecology in this group. We address this issue in a lineage of ray-finned fishes that is well known for its ecological and functional diversity—African rift lake cichlids. We sequenced ultraconserved elements to generate a phylogenomic tree of the Lake Tanganyika and Lake Malawi cichlid radiations. We filmed a diverse array of over 50 cichlid species capturing live prey and quantified the extent of jaw kinesis in the premaxillary and maxillary bones. Our combination of phylogenomic and kinematic data reveals a strong association between biting modes of feeding and reduced jaw kinesis, suggesting that the contrasting demands of biting and suction feeding have strongly influenced cranial evolution in both cichlid radiations.     

Convergence and divergence in the evolution of cat skulls: temporal and spatial patterns of morphological diversity

Background

Studies of biological shape evolution are greatly enhanced when framed in a phylogenetic perspective. Inclusion of fossils amplifies the scope of macroevolutionary research, offers a deep-time perspective on tempo and mode of radiations, and elucidates life-trait changes. We explore the evolution of skull shape in felids (cats) through morphometric analyses of linear variables, phylogenetic comparative methods, and a new cladistic study of saber-toothed cats.

Methodology/Principal Findings

A new phylogenetic analysis supports the monophyly of saber-toothed cats (Machairodontinae) exclusive of Felinae and some basal felids, but does not support the monophyly of various saber-toothed tribes and genera. We quantified skull shape variation in 34 extant and 18 extinct species using size-adjusted linear variables. These distinguish taxonomic group membership with high accuracy. Patterns of morphospace occupation are consistent with previous analyses, for example, in showing a size gradient along the primary axis of shape variation and a separation between large and small-medium cats. By combining the new phylogeny with a molecular tree of extant Felinae, we built a chronophylomorphospace (a phylogeny superimposed onto a two-dimensional morphospace through time). The evolutionary history of cats was characterized by two major episodes of morphological divergence, one marking the separation between saber-toothed and modern cats, the other marking the split between large and small-medium cats.

Conclusions/Significance

Ancestors of large cats in the ‘Panthera’ lineage tend to occupy, at a much later stage, morphospace regions previously occupied by saber-toothed cats. The latter radiated out into new morphospace regions peripheral to those of extant large cats. The separation between large and small-medium cats was marked by considerable morphologically divergent trajectories early in feline evolution. A chronophylomorphospace has wider applications in reconstructing temporal transitions across two-dimensional trait spaces, can be used in ecophenotypical and functional diversity studies, and may reveal novel patterns of morphospace occupation.