Capillary electrophoresis procedures for serum protein analysis: comparison with established techniques

Methods using automated capillary electrophoresis (CE) instrumentation are available for serum protein electrophoresis with monoclonal band quantitation, isoelectric focusing and sodium dodecyl sulphate-polyacrylamide gel electrophoresis separations. The advantages of CE over previous gel methods relate to the time and labour saved by the automated instrumentation. High pI monoclonal bands and cryoglobulin specimens can be successfully analysed by CE. However, if the CE application uses a standard company supplied kit, then the cost savings are often negated by the high cost of the kit. Improvements such as the inclusion of both a UV-Vis as well as a fluorescence detector as standard within the one commercial instrument, the production of coated IEF capillaries with a useful life of at least 100 samples, and the introduction of a capillary array into all commercial instrumentation would ensure greater use of CE within both the clinical and other protein laboratories.     

Five unusual serum protein presentations found by capillary electrophoresis in the clinical laboratory.

Capillary electrophoresis (CE) has been used in our teaching hospital clinical laboratory to assay approximately 13 000 specimens for serum protein electrophoresis (SPE) in 4 1/2 years. During that period we have found several unusual samples, five of which are discussed here. These samples are from separate patients with IgD myeloma, IgG heavy chain disease, a triple IgG(Kappa) monoclonal band, a rapidly changing abnormal/monoclonal band and a mixed type-11 cryoglobulinaemia. Albumin has been used to calibrate the 50-microm fused silica capillary, the quantity of the monoclonal bands being calculated by the software of either the Applied Biosystems 270A-HT or BioFocus instrument. We have found CE for the initial SPE to be a robust, labour-saving, cost effective technique, which is able to determine less than 1 g/l of monoclonal protein. However, because of the expense and time required for immunosubtraction, we prefer isoelectric focusing (IEF) for typing of paraproteins. The only samples which need care in handling are serum containing large amounts of cryoglobulin protein.     

Determination of poorly separated monoclonal serum proteins by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) technique was developed for the determination of poorly separated monoclonal serum proteins by agarose gel electrophoresis (AGE). A P/ACE 5500 capillary instrument (Beckman) was used under the following conditions: 57 cm x 50 microm I.D. fused-silica capillary, pH 9.6 borate buffer, and 214 nm on-line detection. Sixty patients (61 +/- 13 years) with a well isolated (n=24, group A) or poorly separated monoclonal band(s) by AGE (n=36, group B) were included in this study. Within- and between-run precision for CZE was below 4% for albumin and 7% for gamma-globulin. A 100% (group A) or 61% agreement (group B, more bands detected by CZE in 10 cases) was obtained between CZE and AGE for the number of monoclonal bands. In group B, quantification was possible in 92% of samples by CZE vs. 64% by AGE (P<0.05, chi-square). The proposed CZE method appears as an additional helpful technique for the determination of poorly separated monoclonal serum proteins by AGE.     

Sensitive analysis of [ -Pen]enkephalin in rat serum by capillary electrophoresis and laser-induced fluorescence detection

A highly sensitive analytical method based on capillary zone electrophoresis (CZE) coupled with a laser-induced fluorescence (LIF) detector was explored for the analysis of [ -Pen^2,5]enkephalin (DPDPE) in rat serum. DPDPE and the internal standard Phe-Leu-Glu-Glu-Ile (P9396) were extracted from serum samples with C₁₈ solid-phase extraction disk cartridges, followed by derivatization with tetramethylrhodamine-5-isothiocyanate (TRITC) isomer G before introduction onto the capillary column. Complete resolution of DPDPE and the internal standard from other serum components was achieved within 20 min on a 140 cm×50 μm I.D. capillary column with borate buffer (25 mM, pH 8.3). With the current method, it is possible to detect 1.3E-18 mol of DPDPE on column. The results suggest that CZE-LIF is a promising method for the sensitive and specific quantitation of therapeutic peptides in biological matrices.     

Separation of bovine serum albumin and its monoclonal antibody from their immunocomplexes by sodium dodecyl sulfate–capillary gel electrophoresis and its application in capillary electrophoresis-based immunoassay

A non-competitive immunoassay was performed by sodium dodecyl sulfate–capillary gel electrophoresis with UV detection using bovine serum albumin (BSA) and monoclonal anti-BSA. BSA, anti-BSA and their immunocomplexes were well resolved under non-denaturing conditions. A linear calibration curve was obtained and can be used for the quantification of anti-BSA. The limit of detection of anti-BSA was 0.1 μM under the present conditions. Compared with capillary zone electrophoresis, we believed that this method has the potential to be used as a more general format for performing capillary electrophoresis-based immunoassay of medium- and large-sized analytes.     

Determination of iothalamate in rat urine,plasma, and tubular fluid by capillary electrophoresis

A method for the quantitative determination of iothalamate (IOT) in rat urine, plasma and tubular fluid by capillary zone electrophoresis (CE) has been developed and validated. Samples of urine and tubular fluids were diluted with water and samples of plasma were deproteinized with two volumes of acetonitrile containing the internal standard, p-aminobenzoic acid (PABA). A BioFocus 2000 system (Bio-Rad, Hercules, CA, USA) was used. The UV detector was set at 254 nm. The samples were loaded into uncoated fused-silica capillary (40 cm×50 μm) by pressure injection. A borate buffer [20 mM, pH 12 (pH adjusted with 1.0 M NaOH)] was used as the electrophoretic buffer. The typical analytical conditions were: voltage, 22 kV; injection, 9 psi×s; capillary and carousel temperatures were 20°C and 18°C respectively. The linear relationship was observed between time-corrected peak area of IOT in water and urine or the corrected peak area ratio of IOT to PABA in plasma and the nominal concentration of IOT with correlation coefficient greater than 0.999. The intra- and inter-day coefficients of variation (CV) were less than 8%. The concentration of IOT in plasma, urine and tubular fluid determined by CE can be used for estimation of whole kidney and single nephron clearances.     

Development of a capillary zone electrophoresis assay to examine the disposition of [d-pen]enkephalin in rats

A novel capillary zone electrophoresis (CZE) assay method was developed to evaluate the systemic disposition of [d-pen^2,5]enkephalin (DPDPE) in rats. DPDPE was recovered from serum samples (200 μl) by solid-phase extraction. Complete resolution of DPDPE and the internal standard ([d-ser²]leucine-enkephalin; DSLET) from other serum components was achieved within 15 min on a 50-μm I.D. capillary column with borate buffer (25 mM, pH 8.3). The peak-height ratio (DPDPE to DSLET) was linear through 100 μg/ml, with a detection limit of 250 ng/ml in serum, when absorbance of the column eluent was monitored at 210 nm. Serum samples obtained from rats after a 10 mg/kg intravenous bolus dose of DPDPE were analyzed with the present CZE method. The results suggest that CZE is a useful technique for quantitating therapeutic peptides in biological matrices.     

Application of a polyamine-coated capillary to the separation of metallothionein isoforms by capillary zone electrophoresis

In this study a fused-silica capillary treated internally with a polyamine coating which reverses electroosmotic flow in the direction of the anode was evaluated for its ability to resolve metallothionein (MT) isoforms. Analysis of different MTs purified from liver and kidney tissue revealed the following numbers of putative isoform peaks resolved: rabbit (3–6); horse (3–5); rat (2–3), chicken (1); human MT-1 (5–6); sheep (4–5) and pig (4–5). The greater degree of MT isoform heterogeneity detected in this study using the polyamine-coated capillary suggested a higher resolving capacity for capillary zone electrophoresis conducted with this capillary compared to an uncoated one. Using the single isoform of chicken MT (cMT) as a reference standard, relative standard deviations of 2.53, 1.85 and 2.21% for peak migration time, area and height, respectively, were observed for eight consecutive runs. A standard curve for cMT established linearity (r² = 0.99) for integrated peak area over three log units of cMT concentration with a lower limit of detection estimated to be 5 μg/ml. Acetonitrile extracts of chick liver tissue homogenates were successfully analyzed for the presence of MT isoforms from both control and zinc-injected animals. Based on our initial evaluation, capillary zone electrophoresis using the polyamine-coated capillary appears to be a very useful analytical method for the separation and quantification of individual MT isoforms.     

Capillary electrophoresis of methotrexate polyglutamates and its application in evaluation of γ-glutamyl hydrolase activity

A rapid and sensitive procedure for the separation of methotrexate (MTX) polyglutamates² using capillary electrophoresis (CE) is described as it applies to the in vitro assay of the enzyme γ-glutamyl hydrolase (GGH, EC 3.4.22.12). Distinct separation of MTX and polyglutamylated forms (up to glu₄) is achieved within 10 min using a 75 μm I.D. capillary (50 cm, +25 kV), and enables quantitation of both reactant and enzyme products. As activity can be reliably determined using less than 5×10⁵ eukaryotic cells, this new technique can be used to measure GGH in patient tumor samples and investigate the relationship between GGH levels and clinical MTX resistance.     

Quantitative analysis of DNA aberrations amplified by competitive polymerase chain reaction using capillary electrophoresis

We compared the use of capillary electrophoresis (CE) in a polymer network with the use of slab gel electrophoresis for the quantitative analysis of polymerase chain reaction (PCR)-amplified DNA samples. We quantified residual lymphoma cells carrying a translocation between chromosomes 14 and 18, in consecutive patient peripheral blood samples that were amplified by competitive PCR. For CE analysis we used a 4% linear polyacrylamide network. Results show that the calculated number of translocations in patient samples using both analyses were comparable. We conclude that CE is a sensitive, non-radioactive, fast and accurate method for quantitation of competitive PCR products.     

Quantitation of polymerase chain reaction products by capillary electrophoresis using laser fluorescence

In samples where the amount of DNA is limited, the polymerase chain reaction (PCR) can amplify specific regions of the DNA. A quantitative analysis of the PCR product would be desirable to ensure sufficient DNA is available for analysis. In this study, we examine the use of capillary electrophoresis (CE) with laser fluorescence detection for quantitation of PCR products. A coated open tubular capillary was used with a non-gel sieving buffer and a fluorescent intercalating dye to obtain results within 20 minutes. Using an internal standard, peak migration time was below 0.1% relative standard deviation (R.S.D.) with a peak area precision of 3% R.S.D. In comparison to quantitation by hybridization, (i.e., slot blot) and spectrophotometric analysis, capillary electrophoresis shows distinct advantages due to its ability to separate unincorporated primers and PCR byproducts from the targeted PCR product. The results demonstrate that CE can be used to monitor the quality and quantity of the PCR product.     

Affinity capillary electrophoresis: important application areas and some recent developments

Affinity capillary electrophoresis (ACE) is a broad term referring to the separation by capillary electrophoresis of substances that participate in specific or non-specific affinity interactions during electrophoresis. The interacting molecules can be found free in solution or can be immobilized to a solid support. Every ACE mode has advantages and disadvantages. Each can be used for a wide variety of applications. This paper focuses on applications that include purification and concentration of analytes present in diluted solutions or complex matrices, quantitation of analytes based on calibration curves, and estimation of binding constants from direct and derived binding curves based on quantitation of analytes or on analyte migration shifts. A more recent chemicoaffinity strategy in capillary electrophoresis/capillary electrochromatography (CE/CEC) termed molecular imprinting (`plastic antibodies') is discussed as well. Although most ACE studies are aimed at characterizing small-molecular mass analytes such as drugs, hormones, and peptides, some efforts have been pursued to characterize larger biopolymers including proteins, such as immunoglobulins. Examples of affinity interactions that have been studied are antigen–antibody, hapten–antibody, lectin–sugar, drug–protein, and enzyme–substrate complexes using ultraviolet, laser-induced fluorescence, and mass spectrometer detectors. This paper also addresses the critical issue of background electrolyte selection and quantitation of analytes. Specific examples of bioaffinity applications are presented, and the future of ACE in the biomedical field is discussed.     

Abnormal protein patterns in blood serum and cerebrospinal fluid detected by capillary electrophoresis

Capillary zone electrophoresis and high-resolution agarose gel electrophoresis were compared to detect protein components in serum and cerebrospinal fluid of patients. Both electrophoretic methods proved to be useful for detection of protein abnormalities (e.g., mono- and oligoclonal bands) in biological fluids, but capillary electrophoresis offered several important advantages, such as sample application without preliminary concentration, lack of staining procedures, and on-line evaluation of patterns. Furthermore, capillary electrophoresis exhibits shorter analysis time and high resolution with low baseline noise. The results were proven to be powerful in diagnosis and monitoring of dyscrasias in routine laboratory practice.     

HiTRACE: high-throughput robust analysis for capillary electrophoresis

MOTIVATION: Capillary electrophoresis (CE) of nucleic acids is a workhorse technology underlying high-throughput genome analysis and large-scale chemical mapping for nucleic acid structural inference. Despite the wide availability of CE-based instruments, there remain challenges in leveraging their full power for quantitative analysis of RNA and DNA structure, thermodynamics and kinetics. In particular, the slow rate and poor automation of available analysis tools have bottlenecked a new generation of studies involving hundreds of CE profiles per experiment. RESULTS: We propose a computational method called high-throughput robust analysis for capillary electrophoresis (HiTRACE) to automate the key tasks in large-scale nucleic acid CE analysis, including the profile alignment that has heretofore been a rate-limiting step in the highest throughput experiments. We illustrate the application of HiTRACE on 13 datasets representing 4 different RNAs, 3 chemical modification strategies and up to 480 single mutant variants; the largest datasets each include 87 360 bands. By applying a series of robust dynamic programming algorithms, HiTRACE outperforms prior tools in terms of alignment and fitting quality, as assessed by measures including the correlation between quantified band intensities between replicate datasets. Furthermore, while the smallest of these datasets required 7-10 h of manual intervention using prior approaches, HiTRACE quantitation of even the largest datasets herein was achieved in 3-12 min. The HiTRACE method, therefore, resolves a critical barrier to the efficient and accurate analysis of nucleic acid structure in experiments involving tens of thousands of electrophoretic bands.     

Development of a capillary electrophoresis method for the determination of allopurinol and its active metabolite oxypurinol

A simple and sensitive capillary zone electrophoresis method with UV absorbance detection is described for the quantitation of allopurinol and its metabolite oxypurinol in aqueous solution. The influence of different parameters on migration times, peak symmetry, efficiency and resolution was systematically investigated; these parameters included the nature and concentration of the separation buffer, pH and applied voltage. A buffer consisting of 15 mM 2-[N-cyclohexylamino]ethanesulfonic acid (CHES) adjusted to pH 8.8 was found to provide a very efficient and stable electrophoretic system for the analysis of these compounds. The optimized method was validated with respect to precision, linearity, limits of detection and quantification, accuracy and robustness. The applicability of the assay was demonstrated by analyzing these compounds in serum and allopurinol in commercial pharmaceutical preparations.     

Detection of serum proteins by native polyacrylamide gel electrophoresis using Blue Sepharose CL-6B-containing stacking gels

Analysis of serum proteins by native polyacrylamide gel electrophoresis is difficult because albumin is abundant in serum and interferes with the resolution of other proteins, especially alpha-antitrypsin which has mobility that is very similar to that of albumin. We present here a method in which serum proteins are separated by polyacrylamide gel electrophoresis using stacking gels containing Blue Sepharose CL-6B, which has a high affinity for albumin, lipoproteins, kinases, and pyridine-nucleotide-dependent oxidoreductases. During electrophoresis, proteins that bind to Blue Sepharose CL-6B stay in the stacking gel and do not migrate into the separating gel. As a consequence, certain proteins, including alpha(1)-antitrypsin, can be detected as clear bands. This method overcomes the requirement for fractionation of serum samples prior to electrophoresis to remove albumin and allows the simultaneous analysis of many samples.     

Direct analysis of bromide in human serum by capillary electrophoresis

The purpose of the present work was the development and validation of a simple, rapid and reliable method for direct bromide quantification in serum based on capillary electrophoresis (CE). The analysis was carried out with an automated capillary electropherograph. Analytical conditions were as follows. Capillary: uncoated fused silica, effective length 50 cm, internal diameter 50 microm; voltage: 20 kV in reverse polarity mode; temperature: 25 degrees C; running buffer: 90 mmol/L sodium tetraborate decahydrate and 10 mmol/L NaCl, pH 9.24; detection: direct UV absorption at 200 nm; sample treatment: dilution of serum 1:10 with the internal standard solution (2 mmol/L thiocyanate). Under the described conditions, bromide ions and internal standard were baseline separated in 7 min. No interferences from other serum components were observed. The analytical sensitivity was characterized by a LOD: 0.05 mmol/L and a LOQ of 0.1 mmol/L. Excellent linearity was verified in the range from 2.5 to 60 mmol/L [y = 0.0746x - 0.0372; R2 = 0.9995 (x = bromide concentration; y = bromide peak area/internal standard (I.S.) peak area)]. Quantitative imprecision in intra-day (n = 7) and day-to-day (n = 7) experiments was always within R.S.D. values <2%. Recovery was quantitative throughout the range of linearity of the method. Clinical cases of infants undergoing potassium bromide therapy for refractory epilepsy were analyzed with results in agreement with literature data. On the basis of these considerations, capillary electrophoresis can be proposed as the method of choice for bromide analysis in serum samples, especially for therapeutic drug monitoring purposes.     

Investigation of enantioselective ligand–protein binding and displacement interactions using capillary electrophoresis

When a protein such as human serum albumin is added to the separation buffer in capillary electrophoresis, the mobility of solutes which bind to that protein may be altered. The change in mobility of the solute is a function both of the strength of the binding interaction, and the difference in mobility between the free solute and protein additive. By adding other ligands which themselves bind to the protein, the strength of the solute–protein binding may be modified, leading to a measurable change in the mobility of the solute. These effects are particularly striking for chiral compounds, where enantioselectivity may be completely lost on addition of a competitive ligand. Capillary electrophoresis with human serum ablumin as a buffer additive was used to separate the enantiomers of benzoin and three phenothiazine derivatives. A comparison of the binding of (S)-benzoin to human serum albumin as determined by capillary electrophoresis and by ultrafiltration was made. A variety of other ligands were then added to the buffer along with the protein, and the effects on mobility and enantioselectivity were studied. The displacers included (R)- and (S)-oxazepam hemisuccinate, (R)- and (S)-warfarin, nitrazepam, phenylbutazone, and octanoic acid. From the results obtained, it seems that capillary electrophoresis may be a useful, rapid method to screen for drug–drug interactions. There are some advantages of using this technique to study protein–ligand interactions: Only very small amounts of ligand are needed (useful when dealing with metabolites); for chiral compounds, if protein binding is stereoselective, then the method is also stereoselective, so single enantiomers are not needed; finally, measurements are obtained in solution, without the need for immobilization of the protein. A disadvantage is that the ligand and protein must have significantly different electrophoretic mobilities. © 1994 Wiley-Liss, Inc.     

Measurement of nephrolithiasis urinary markers by capillary electrophoresis

A previously developed method for screening organic acidurias by capillary electrophoresis has been validated for oxalate and citrate measurement in urine. Sample pretreatment is minimum, just acidification and centrifugation. Detection is by direct UV. Validation parameters of the method can be considered adequate. Response is linear for both analytes in standards and samples. The assayed ranges were 200–1000 mg/l for citrate and 10–200 mg/l for oxalate. Recoveries ranged from 99.4±3 to 101.7±2.4%, maximum imprecision in oxalate concentration was of 7.6% RSD and limits of detection in samples were 0.67 mg/l for oxalate and 25.9 mg/l for citrate, both lower than the measured values in samples. Identification of increased glyoxylic (oxoacetic acid) and glyceric acids (2,3-dihydroxy propanoic) are also included to facilitate the diagnosis.     

Serum and Urine Electrophoresis for Detection and Identification of Monoclonal Proteins

Electrophoresis may be defined as the separation of charged particles in a uniform electric field. For a particular system of electrophoresis, the voltage is held constant as are the pH and ionic strength of the suspending medium.Tiselius, using a moving boundary liquid system, separated serum proteins by electrophoresis into four components in 1937.¹ Paper electrophoresis, popular in the 1950s, provided the rst solid electrophoresis support. The fragility of paper as a support medium saw the introduction of the more robust cellulose acetate a decade later. An improvement in resolution was subsequently gained by using agarose gel, which, in serum samples, gave 5 bands of separation.^2,3 In the late 1980s, high resolution agarose gels were introduced which produced at least 6 bands, and depending on the system, as many as 17 bands in serum.^4,5Fully automated serum electrophoresis commenced in the 1990s with the introduction of capillary electrophoresis (CE), a reintroduction of a liquid medium but with exquisite resolution compared to Tiselius’ procedure. Using CE instrumentation it is possible to program a sequence of samples and leave them overnight to be processed.Amalgamation of laboratories with an increasing number of patient samples was probably the reason for the semi-automation of gel electrophoresis. The introduction of the Helena SPIFE and Sebia Hydrasys gel systems provided ways of electrophoresing over a hundred serum samples per day. There is certainly a role for such instrumentation in electrophoresis laboratories today.