Microcallus formation from maize protoplasts prepared from embryogenic callus

Conditions have been developed that induce maize (Zea mays L.) protoplasts to re-synthesize cell walls and to initiate cell divisions. Two types of embryogenic maize callus were used as a source of protoplasts: a heterogeneous callus (Type I) derived from immature embryos after three weeks in culture, and a friable, rapidly growing callus (Type II) selected from portions of the Type I callus. Many variables in the growth conditions of the donor tissue (type of medium, transfer schedule, age of callus), protoplast isolation solutions (pH, osmolarity, type and concentration of cell wall hydrolyzing enzymes, addition of polyamines) and conditions (amount of time in enzyme, amount of tissue per volume of enzyme incubation medium, agitation, preplasmolysis of source tissue, type of callus), and purification procedures (filtration and-or flotation), were found to affect both yield and viability of protoplasts (based upon fluorescein-diacetate staining). Our isolation procedure yielded high numbers of viable, uninucleated maize callus protoplasts which were densely cytoplasmic and varied in size from 20 to 50 m in diameter. Protoplasts plated in solid medium formed walls and divided several times. Of several gelling agents tested for protoplast propagation, only agarose resulted in protoplasts capable of sustained divisions leading to the formation of microcalli. Plating efficiency was established over a wide range of protoplast densities (10³–10⁷ protoplasts/ml). Highest plating efficiency (25%) was obtained at 1·10⁶ protoplasts/ml). The resulting microcalli grew to be dense clusters of about 0.1–0.5 mm in diameter and then stopped growing. Nurse cultures of maize and carrot (Daucus carota L.), were used to establish that individual protoplasts (not contaminating cells or cell clusters) formed walls and divided. Nurse cultures also increased the efficiency of microcallus formation from protoplasts.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - MS Murashige and Skoog (1962) salts - MS 1D Murashige and Skoog salts with 1 mg/l 2,4-D - MS 2D Murashige and Skoog salts with 2 mg/l 2,4-D - N₆ medium of Chu et al. (1975) - NN67-mod medium of Nitsch and Nitsch (1967) as modified in the present paper - FDA fluorescein diacetate - LMP low melting point     

Studies of cotyledon protoplast cultures from Brassica napus,B. campestris and B. oleracea. I: Cell wall regeneration and cell division

Protoplasts isolated from cotyledons of a number of cultivars of Brassica napus, B. campestris and B. oleracea were cultured in different media to study the characteristics of cell wall regeneration and cell division at early stages of culture. Time course analysis using Calcolfluor White staining indicated that cell wall regeneration began in some protoplasts 2–4 h following isolation in all cultivars. 30–70% of cultured cotyledon protoplasts exhibited cell wall regeneration at 24 h and about 60–90% at 72 h after the initiation of culture. Results also indicated that a low percentage (0.4–5.4%) of cultured cotyledon protoplasts entered their first cell division one day after initial culture in all twelve cultivars. The percentage of dividing cells increased linearly up to 40% from 1 to 7 day, indicating that cotyledon protoplasts of Brassica had a high capacity for cell division. Factors that influence the level of cell wall regeneration and cell division during cotyledon protoplast culture have been investigated in this study. Cotyledons from seedlings germinated in a dark/dim light regime provided a satisfactory tissue source for protoplast isolation and culture for all Brassica cultivars used. The percentages of protoplasts exhibiting cell wall regeneration and division were significantly influenced by cultivar and species examined, with protoplasts from all five cultivars of B. campestris showing much lower rates of cell wall regeneration than those of B. napus and B. oleracea over 24–120 h, and with the levels of cell division in B. napus cultivars being much higher than those in B. campestris and B. oleracea over 1–9 days. The capacity of cell wall regeneration and cell division in cotyledon protoplast culture of the Brassica species appears under strong genetic control. Cell wall regeneration in protoplast culture was not affected by the culture medium used. In contrast, the composition of the culture medium played an important role in determining the level of cell division, and the interaction between medium type and cultivars was very significant.Abbreviations BA benzylaminopurine - CPW Composition of Protoplast Washing-solution - CW Calcolfluor White - EDTA ethylenediamine-tetraacetic acid - KT Kinetin - Md MS modified Murashige and Skoog medium - 2,4-d 2,4-dichlorophenoxyacetic acid - NAA -naphthaleneacetic acid - IAA indole-3-acetic acid - PAR photosynthetically active radiation - SDS sodium dodecyl sulfate     

Factors affecting protoplast electrofusion efficiency

The electrofusion efficiency of protoplasts isolated from a carrot (Daucus carota) suspension culture was increased by treatment with 0.1 mg/ml lysolecithin, 2.5% dimethylsulfoxide (DMSO), or 0.5 mM Ca²⁺. The lysolecithin and DMSO treatments substantially increased protoplast lysis, whereas calcium treatment did not. The enzymes used for protoplast isolation were also found to have a dramatic effect on the efficiency of fusion. A mixture of Cellulysin and Driselase led to a two-fold enhancement of fusion as compared with Driselase alone. The stimulation by Cellulysin appears to be due to enzymatic modification of the cell surface. However, comparison of the time course for wall digestion with the development of susceptibility to electrofusion suggests that the effect of Cellulysin is not simply due to removal of the cell wall. Brief treatment of the cells with pronase or proteinase K also doubled the efficiency of fusion. Taken together, these results indicate that electrofusion efficiency can be enhanced by the method used for protoplast isolation; they also suggest that modification of membrane/cell-surface proteins during protoplast isolation may be particularly important in determining electrofusion efficiencies.Abbreviations a.c. alternating current - d.c. direct current - DMSO dimethylsulfoxide - NAA naphthaleneacetic acid - PEG polyethylene glycol     

Culture of soybean mesophyll protoplasts in alginate beads

Mesophyll protoplasts were isolated from leaves of 10 day old aseptically grown soybean seedlings, or from surface disinfested leaves of 3 week old plants grown in environmental chambers. The protoplasts were encapsulated in 2mm diameter Ca alginate beads. Immobilized protoplasts were induced to divide by culturing in shaker flasks containing an actively growing soybean cell suspension. The feeder cell suspension supported the division of protoplasts independent of the protoplast density in the Ca alginate beads. At day 18 after encapsulation, the alginate matrix was dissolved, releasing viable callus colonies. The feeder cell suspension obviated plating of protoplasts at high density which is usually required for subsequent cell division and colony development. Since the protoplasts were embedded at low density, the cell colonies were derived from single cells.     

小麦原生质体分离过程中生理状态的变化

酶解处理使小麦对肉原生质体膜流动性降低,膜脂过氧化产物丙二醛（ＭＤＡ）积累,说明脱璧过程对细胞有伤害作用,损伤位点可能发生在膜上。胚性愈伤组织的具有分裂能力的原生质体,不表现上述变化。酶解脱壁还使超氧化物歧化酶（ＳＯＤ）和过氧化氢酶（ＣＡＴ）活性上升;过氧化物酶（ＰＯＸ）在叶肉原生质体中活性下降,在胚性愈伤组织来源的原生质体中活性上升。以上结果表明：在原生质体分离过程中,细胞的生理特性发生了变化;膜损伤的发生可能与原生质体能否进入正常分裂状态有关。     

Induction of efficient cell division in alfalfa protoplasts

Alfalfa (Medicago sativa L.) protoplasts derived from cell suspension cultures divided inefficiently in liquid culture. The onset of cell division activity occurred synchronously among the protoplasts; however, many were blocked at cytokinesis and therefore did not complete first division. Very few of the cells that began to divide continued to do so. Immobilization of protoplasts in agarose after 1 to 4 days in liquid culture overcame this inhibition of division. Continuous growth in agarose was restricted and therefore microcolonies were transferred to agar medium to complete callus development. Plating efficiencies of 2–10% were achieved within 30 days of protoplast isolation. The agarose treatment was responsible for a 5- to 30-fold improvement in plating efficiency.Contribution No. 774 Ottawa Research Station     

Factors Influencing the Growth and Division of Pea Mesophyll Protoplasts

High yields of viable protoplasts were produced from pea leaves provided that only leaves of the same age were used in each preparation. The conditions under which the pea plants were grown and the age of the plants were also important. The protoplasts were cultured in a medium supplemented with 1 mg/1 2iP and 1 mg/1 2,4-D. They were able to regenerate cell walls within two days. After 5 days cell divisions were apparent and sustained divisions led to callus formation. Special emphasis has been given in this paper to the choice of leaf material for protoplast isolation.     

Seaweed protoplasts: status,biotechnological perspectives and needs

Protoplasts are living plant cells without cell walls which offer a unique uniform single cell system that facilitates several aspects of modern biotechnology, including genetic transformation and metabolic engineering. Extraction of cell wall lytic enzymes from different phycophages and microbial sources has greatly improved protoplast isolation and their yield from a number of anatomically more complex species of brown and red seaweeds which earlier remained recalcitrant. Recently, recombinant cell wall lytic enzymes were also produced and evaluated with native ones for their potential abilities in producing viable protoplasts from Laminaria. Reliable procedures are now available to isolate and culture protoplasts from diverse groups of seaweeds. To date, there are 89 species belonging to 36 genera of green, red and brown seaweeds from which successful protoplast isolation and regeneration has been reported. Of the total species studied for protoplasts, most belonged to Rhodophyta with 41 species (13 genera) followed by Chlorophyta and Phaeophyta with 24 species each belonging to 5 and 18 genera, respectively. Regeneration of protoplast-to-plant system is available for a large number of species, with extensive literature relating to their culture methods and morphogenesis. In the context of plant genetic manipulation, somatic hybridization by protoplast fusion has been accomplished in a number of economically important species with various levels of success. Protoplasts have also been used for studying foreign gene expression in Porphyra and Ulva. Isolated protoplasts are also exploited in numerous miscellaneous studies involving membrane function, cell structure, bio-chemical synthesis of cell walls etc. This article briefly reviews the status of various developments in seaweed protoplasts research and their potentials in genetic improvement of seaweeds, along with needs that must to be fulfilled for effective realization of the objectives envisaged for protoplast research.     

Protoplast isolation and regeneration from <Emphasis Type="Italic">Gracilaria changii</Emphasis> (Gracilariales,Rhodophyta)

The tropical agarophyte Gracilaria changii has been much researched and documented by the Algae Research Laboratory, University of Malaya, especially with regards to its potential as a seaweed bioreactor for valuable compounds. Protoplast regeneration of this seaweed was developed following the optimization of protoplast isolation protocol. Effect of the concentration and combination of isolating enzymes, incubation period, temperature, enzyme solution pH, tissue source on the protoplast yields were used to optimize the isolation protocol. The enzyme mixture with 4% w/v cellulase Onozuka R-10, 2% w/v macerozyme R-10 and 1 unit mL^-1 agarase was found to produce the highest yield of protoplast at 28°C and 3 h incubation period. Thallus tips gave higher yields of protoplasts than middle segments. Freshly isolated G. changii protoplasts were cultured in MES medium. Regeneration of protoplast cell walls after 24 h was confirmed by calcofluor white M2R staining under UV fluorescence microscopy. The protoplasts with regenerated cell walls then underwent a series of cell division to produce callus-like cell masses in MES medium. Following this, juvenile plants of G. changii were obtained.     

Electrofusion of protoplasts from celery (Apium graveolens L.) with protoplasts from the filamentous fungus Aspergillus nidulans

A method was developed for electrofusion of higher-plant protoplasts from celery and protoplasts from the filamentous fungus Aspergillus nidulans. Initially, methods for the fusion of protoplasts from ecch species were determined individually and, subsequently, electrical parameters for fusion between the species were determined. Pronase-E treatment and the presence of calcium ions markedly increased celery protoplast stability under the electrical conditions required and increased fusion frequency with A. nidulans protoplasts. A reduction in protoplast viability was observed after electrofusion but the majority of the protoplasts remained viable over a 24-h incubation period. A small decline in protoplast respiration rate occurred during incubation but those celery protoplasts fused with A. nidulans protoplasts showed elevated respiration rates for 3 h after electrofusion.Abbreviations AC alternating current - DC direct current     

Barley scutellum protoplasts: Isolation, culture and plant regeneration

Many applications of cereal protoplast culture systems are still limited by the difficulties of regeneration from suspension cells which are the usual protoplast source. The objective of the present study therefore was to investigate the conditions for the development of a culture system for protoplasts capable of plant regeneration isolated directly from immmature scutella of barley. The procedure developed involves a two-stage pre-culture of scutellar tissue, followed by vacuum infiltration with cell wall degrading enzymes and the culture of alginate-embedded protoplasts. The pre-culture of the scutella and the co-cultivation of protoplasts with nurse cells were the most important factors for the success of the culture system, but several other parameters affecting protoplast yield, viability and sustained division were identified, including the developmental stage of the embryo, the use of cold conditioning periods during pre-culture, the composition of the pre-culture and protoplast culture medium, and the embedding matrix. Protoplasts isolated from scutellar tissues of barley cvs Dissa, Clipper, Derkado and Puffin were capable of sustained division in culture. Macroscopic protoplast-derived tissues were obtained in all cultivars, except ev. Puffin, and fertile plants were regenerated from cvs Dissa and Clipper 3–4 months after protoplast isolation. The procedure described provides a novel approach for the isolation of totipotent protoplasts in barley which avoids the need for suspension cultures.     

Isolation,Culture and Plant Regeneration of Protoplasts from an Embryogenic Callus Tissue of Gossypium hirsutum

Protoplasts were isolated and cultured from hypocotyl embryogenic callus tissue of Gossypium hirsutum L. cv. "Lumian 6". The highest yields of viable protoplasts were obtained from a vigorous embryogenic callus 7 to 9 d old subcultured on MS medium supplemented with 2 mg/L IAA and 1 mg/L KT using a solution of 1% cellulase Onozuka R-10, 1% pectinase, 0.7 mmol/L KH2PO4, 2.5 mmol/L Ca2+ , and 0.5 mol/L osmoticum (mannitol), at pH 5.8 and at a temperature of 30 ℃. After separation and purification (in 21% sucrose floatation medium), the protoplasts were laid up in a quiet liquid protoplast culture medium containing K3 salts, NT vitamins with 0.1 mg/L 2,4-D, 0.2 mg/L KT and 0.45 mol/L glucose for 10 to 15 min. The protoplasts were fractioned into an upper and a lower layer in the centrifugal tube. Most of the protoplasts in the lower layer were smaller, round and rich in cytoplasts in which contain many granular substances. When this kind of protoplasts were cultured in the thin liquid protoplast culture medium with a density of 1 x l0s to 5 x los protoplasts/mL, the division and the callus formation of the regenerated cells were easily observed. The first divisions occurred in 3 days and small cell clusters could be seen after 2 to 3 weeks in the culture. At this moment, the addition of the protoplast culture medium with decreased osmoticum once or twice is needed for the continuous protoplasts division to form calli. Regenerated calli, 3 to 5 mm in diameter, were transferred in succession on MS medium with 2 mg/L IAA and 1 mg/L KT for the initiation of embryogenesis. The embryoids germinated on the hormonefree MS medium and a number of plantlets were obtained. It seems that using vigorous embryogenic callus and decreasing osmoticum are the two critical factors for plant regeneration of cotton protoplasts.     

Callus formation from protoplasts of Artemisia sphaerocephala Krasch and some factors influencing protoplast division

Round wormwood (Artemisia sphaerocephala Krasch) seeds were germinated on Murashige & Skoog (1962) medium without plant growth regulators. The hypocotyls of seedlings were sliced and cultured on M1 medium with 2,4-dichlorophenoxyacetic acid (9.05 M) to induce callus. The induced calluses were subcultured on the same medium. Ten day old calluses were used to isolate protoplasts in an enzyme solution with 0.65 M mannitol. Protoplast yield strongly depended upon the state of callus cultures. Certain amount of hemicellulase could improve protoplast isolation. Purified protoplasts were cultured in modified Kao & Michayluk (1975) medium with 0.60 M mannitol as osmoticum, suggesting that protoplasts of A. sphaerocephala need a high initial osmolarity. Protoplasts generally divided evenly and the percentage of first division could reach 10%. Kinetin exhibited a positive effect on initial cell division. Furthermore, we studied the effect of protoplast density and vitamin C on sustained growth of protoplasts. After forty days, 1 mm calluses in diameter formed.Abbreviations CH casein hydrolysate - 2,4-D 2,4-dichlorophenoxyacetic acid - KM8P Kao & Michayluk (1975) protoplast medium - MS Murashige & Skoog (1962) medium - MES-2 (N-morpholino)ethanesulfonic acid     

Isolation of protoplasts from female gametophytes of Torenia fournieri

Protoplasts from the cells of mature embryo sacs (ES-protoplasts) of Torenia fournieri were obtained during incubation of ovules in an enzyme solution. Four protoplasts which arose from each embryo sac were connected together after isolation, or aggregates of the egg cell protoplast and two synergide protoplasts dissociated from the protoplast of the central cell. The ES-protoplasts stayed viable for 2 weeks in culture, but they did not regenerate cell walls.Abbreviations ES embryo sac - FAA fixative (formalin : acetic acid : alcohol = 1 : 1 : 18) - FDA fluorescein diacetate - PAS periodic acid Schiff reaction - 2,4-D 2,4-dichlorophenoxyacetic acid     

Callus formation from protoplasts of cell suspension cultures of Rosa 'Paul's Scarlet'

Sustained divisions of protoplast-derived cells obtained from cell suspension cultures of Rosa‘Paul's Scarlet’ leading to colony and callus formation was achieved. The rather low plating efficiencies observed for agar-plated protoplasts were partly due to early arrests in further development of dividing protoplast-derived cells and cell clusters. Successful cultivation of dividing protoplast-derived cells was particularly dependent upon frequent subculturing of the precultures and on an efficient procedure for viable protoplast isolation. Colony formation was largely independent of medium composition.     

A simple method for the isolation of plant protoplasts

A simple protoplast isolation protocol that was designed to recover totipotent plant protoplasts with relative ease has been described. The key elements of the protocol are, tissue digestion at slightly elevated temperatures and use of protoplast-releasing enzymes that are stable and efficient at higher temperatures. Besides enzymes, the protoplast isolation cocktail consisted of an osmoticum (mannitol or MgSO₄), and a protectant (CaCl₂ 2H₂O), all dissolved in distilled water. The protocol has ensured reproducibility, higher yields and is gentle on protoplasts as the protoplasts obtained were amenable to cell wall regeneration and cell division. Plant regeneration was demonstrated forNicotiana tabacum cv. Thompson from protoplasts isolated by this method. Wall regeneration and cell division were obtained in other species. The merits of the protocol are, simple and easy-to-handle procedure, non-requirement of preconditioning of donor plant and explants, incubation without agitation, satisfactory yields, culturability of the protoplasts isolated and applicability of the protocol to a large number of species including mucilage-containing plants.     

Cell wall regeneration and cell division in isolated tobacco mesophyll protoplasts

Summary Protoplasts were isolated from palisade tissue of tobacco leaves by treatment with pectinase and cellulase under aseptic conditions, and were cultured in a synthetic liquid medium. Calcofluor, a fluorescent brightener, was found to be an excellent stain for plant cell walls and was used to demonstrate regeneration of cell walls in these protoplasts. The cultured protoplasts regenerated cell walls by the 3rd day of culture, giving rise to spherical cells. The majority of the protoplasts regenerating cell walls underwent mitosis and cell division. The cycle of mitosis and cell division was repeated 2–3 times during 2 weeks of culture. Some of the nutritional conditions affecting division in the cultured protoplasts were studied.     

Comparative effects of fusion facilitators on electrofusion attributes of N. tabacum mesophyll protoplasts

Mesophyll protoplasts isolated from in vitro-grown Nicotiana tabacum L. shoots were subjected to electrofusion.Dielectrophoresis was induced by an AC field of 50 V cm^-1 inter-electrode distance and 0.5 MHz oscillation frequency. Fusion was effected by two 0.7 kV cm^-1 DC pulses, each of 50 s duration, applied within one second of each other. Various chemical treatments were tested for their effects on dielectrophoresis efficiencies (percentages of protoplasts that made contact with at least one other protoplast under the AC field), fusion efficiencies (percentages of protoplasts participating in fusion events), cell lysis (percentages of protoplasts bursting during the electrofusion processes), overall viabilities of fusion products 24 h post-fusion and overall plating efficiencies 7 d post-fusion (percentages of fusion-derived cells that had undergone division). The various attributes assessed on the electrofusion of protoplasts in the control treatment, 10% mannitol, differed considerably for experiments carried out on different days. Relative to the control treatment, only the Ca²⁺ treatments, and to a lesser extent lipase treatment reduced dielectrophoresis efficiencies. Polyamines, cytochalasins and Ca²⁺ treatments significantly reduced cell lysis percentages. All electrofusion facilitators tested (except for spermine at 150 mg l^-1, the cytochalasins B and D, and Ca²⁺ treatments) increased fusion efficiencies to more than 1.5 times those obtained with the standard 10% mannitol electrofusion medium. Ca²⁺ treatments increased overall viabilities of fusion products by more than 1.5 times. With the exception of the prostaglandins, lecithin and CaCl₂ treatments, overall plating efficiencies were reduced by treatment of protoplasts with fusion facilitators. Substantial increases in overall plating efficiencies over those observed in the control treatment were obtained using prostaglandin F_2a, lecithin and CaCl₂.2H₂O treatments. The implications of the results are discussed.Abbreviations AC alternating current, approx.-approximately - BA benzylaminopurine, cv.-cultivar - DC direct current, diam.-diameter - FDA fluorescein diacetate - MS Murashige & Skoog (1962) - NAA napthaleneacetic acid - PCM protoplast culture medium - PIM protoplast isolation medium - PPM protoplast purification medium - rpm revolutions per minute - SD(n) standard deviation of a variate - SEM standard error of the mean     

谷子胚性愈伤组织粘液提取物对原生质体培养的影响

将谷子胚性愈伤组织粘液提取物添加到谷子原生质体培养基中,其对原生质体培养的影响表明该提取物有助于原生质体形成细胞壁;并且该类有粘液分泌的念伤组织的原生质体游离所需的酶液浓度低、处理时间短。由原生质体形成完整细胞的数量在一定范围内与谷子原生质体培养的植板率相对应;通过增加形成完整细胞的数量可较大幅度地提高原生质体培养的植板率。     

Structural and ultrastructural analysis of Solanum lycopersicoides protoplasts during diploid plant regeneration

Light, fluorescence and electron microscopy were used to analyse the structural properties of protoplasts obtained from established suspension culture of Solanum lycopersicoides Dun, composed of meristematic cell aggregates. Four types of protoplasts were distinguished immediately after isolation: (1) mononuclear; (2) polynuclear, (3) anuclear and (4) homogeneous protoplasts. Only mononuclear protoplasts were capable of complete cell wall regeneration and mitotic division. Other types of protoplasts were eliminated during culture. Three phases were distinguished in the developing protoplast culture: (1) the elimination phase during which protoplasts damaged during isolation underwent complete degradation; (2) a phase of intense division during which both mitotic cell division and amitotic nuclear division took place; and (3) a stabilization phase leading to the formation of suspension culture. The cell suspension culture obtained from protoplasts was capable of regenerating diploid plants.