Two-stage pretreatment of rice straw using aqueous ammonia and dilute acid

Liberation of fermentable sugars from recalcitrant lignocellulosic biomass is one of the key challenges in production of cellulosic ethanol. Here we developed a two-stage pretreatment process using aqueous ammonia and dilute sulfuric acid in a percolation mode to improve production of fermentable sugars from rice straw. Aqueous NH? was used in the first stage which removed lignin selectively but left most of cellulose (97%) and hemicellulose (77%). Dilute acid was applied in the second stage which removed most of hemicellulose, partially disrupted the crystalline structure of cellulose, and thus enhanced enzymatic digestibility of cellulose in the solids remaining. Under the optimal pretreatment conditions, the enzymatic hydrolysis yields of the two-stage treated samples were 96.9% and 90.8% with enzyme loadings of 60 and 15FPU/g of glucan, respectively. The overall sugar conversions of cellulose and hemicellulose into glucose and xylose by enzymatic and acid hydrolysis reached 89.0% and 71.7%, respectively.     

Bioconversion of dilute-acid pretreated sorghum bagasse to ethanol by Neurospora crassa

Bioethanol production from sweet sorghum bagasse (SB), the lignocellulosic solid residue obtained after extraction of sugars from sorghum stalks, can further improve the energy yield of the crop. The aim of the present work was to evaluate a cost-efficient bioconversion of SB to ethanol at high solids loadings (16?% at pretreatment and 8?% at fermentation), low cellulase activities (1-7 FPU/g SB) and co-fermentation of hexoses and pentoses. The fungus Neurospora crassa DSM 1129 was used, which exhibits both depolymerase and co-fermentative ability, as well as mixed cultures with Saccharomyces cerevisiae 2541. A dilute-acid pretreatment (sulfuric acid 2?g/100?g SB; 210?°C; 10?min) was implemented, with high hemicellulose decomposition and low inhibitor formation. The bioconversion efficiency of N. crassa was superior to S. cerevisiae, while their mixed cultures had negative effect on ethanol production. Supplementing the in situ produced N. crassa cellulolytic system (1.0 FPU/g SB) with commercial cellulase and β-glucosidase mixture at low activity (6.0 FPU/g SB) increased ethanol production to 27.6?g/l or 84.7?% of theoretical yield (based on SB cellulose and hemicellulose sugar content). The combined dilute-acid pretreatment and bioconversion led to maximum cellulose and hemicellulose hydrolysis 73.3?% and 89.6?%, respectively.     

Dilute acid pretreatment, enzymatic saccharification and fermentation of wheat straw to ethanol

Wheat straw consists of 48.57 ± 0.30% cellulose and 27.70 ± 0.12% hemicellulose on dry solid (DS) basis and has the potential to serve as a low cost feedstock for production of ethanol. Dilute acid pretreatment at varied temperature and enzymatic saccharification were evaluated for conversion of wheat straw cellulose and hemicellulose to monomeric sugars. The maximum yield of monomeric sugars from wheat straw (7.83%, w/v, DS) by dilute H₂SO₄ (0.75%, v/v) pretreatment and enzymatic saccharification (45 °C, pH 5.0, 72 h) using cellulase, β-glucosidase, xylanase and esterase was 565 ± 10 mg/g. Under this condition, no measurable quantities of furfural and hydroxymethyl furfural were produced. The yield of ethanol (per litre) from acid pretreated enzyme saccharified wheat straw (78.3 g) hydrolyzate by recombinant Escherichia coli strain FBR5 was 19 ± 1 g with a yield of 0.24 g/g DS. Detoxification of the acid and enzyme treated wheat straw hydrolyzate by overliming reduced the fermentation time from 118 to 39 h in the case of separate hydrolysis and fermentation (35 °C, pH 6.5), and increased the ethanol yield from 13 ± 2 to 17 ± 0 g/l and decreased the fermentation time from 136 to 112 h in the case of simultaneous saccharification and fermentation (35 °C, pH 6.0).     

Simultaneous Bioconversion of Cellulose and Hemicellulose to Ethanol

ABSTRACT:?

Lignocellulosic materials containing cellulose, hemicellulose, and lignin as their main constituents are the most abundant renewable organic resource present on Earth. The conversion of both cellulose and hemicellulose for production of fuel ethanol is being studied intensively with a view to develop a technically and economically viable bioprocess. The fermentation of glucose, the main constituent of cellulose hydrolyzate, to ethanol can be carried out efficiently. On the other hand, although bioconversion of xylose, the main pentose sugar obtained on hydrolysis of hemicellulose, to ethanol presents a biochemical challenge, especially if it is present along with glucose, it needs to be fermented to make the biomass-to-ethanol process economical. A lot of attention therefore has been focussed on the utilization of both glucose and xylose to ethanol. Accordingly, while describing the advancements that have taken place to get xylose converted efficiently to ethanol by xylose-fermenting organisms, the review deals mainly with the strategies that have been put forward for bioconversion of both the sugars to achieve high ethanol concentration, yield, and productivity. The approaches, which include the use of (1) xylose-fermenting yeasts alone, (2) xylose isomerase enzyme as well as yeast, (3) immobilized enzymes and cells, and (4) sequential fermentation and co-culture process are described with respect to their underlying concepts and major limitations. Genetic improvements in the cultures have been made either to enlarge the range of substrate utilization or to channel metabolic intermediates specifically toward ethanol. These contributions represent real significant advancements in the field and have also been adequately dealt with from the point of view of their impact on utilization of both cellulose and hemicellulose sugars to ethanol.     

Corn fiber as a raw material for hemicellulose and ethanol production

Corn fiber (CF) is a potential raw material for the production of various products because it is widely available in corn-producing countries. Corn fiber is a byproduct of the corn wet-milling industry and a very large amount of it (approximately 130 t/day) is produced in Hungary. The major component of corn fiber is the pericarp that consists of 35% hemicellulose, 18% cellulose and 20% remaining starch (protein, fiber oil and lignin are also present in this material). Corn fiber is presently used as animal feed. However, with continuous growth in corn processing to ethanol, there might be problems with the utilization of the surplus fibrous byproducts. In this paper the conversion of corn fiber to ethanol or other products was examined. Destarched corn fiber was pretreated by using different alkaline solutions and dissolved hemicellulose was precipitated with ethanol for the recovery of a valuable coproduct. The residual material consisting mostly of cellulose was hydrolyzed with cellulolytic enzymes and fermented into ethanol by using Saccharomyces cerevisiae.     

Bioethanol production from steam-exploded rice husk by recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis> KO11

Rice husk is one of the most abundant types of lignocellulosic biomass. Because of its significant amount of sugars, such as cellulose and hemicellulose, it can be used for the production of biofuels such as bioethanol. However, the complex structure of lignocellulosic biomass, consisting of cellulose, hemicellulose and lignin, is resistant to degradation, which limits biomass utilization for ethanol production. The protection of cellulose by lignin contributes to the recalcitrance of lignocelluloses to hydrolysis. Therefore, we conducted steam-explosion treatment as pretreatment of rice husk. However, recombinant Escherichia coli KO11 did not ferment the reducing sugar solution obtained by enzymatic saccharification of steam-exploded rice husk. When the steam-exploded rice husk was washed with hot water to remove inhibitory substances and M9 medium (without glucose) was used as a fermentation medium, E. coli KO11 completely fermented the reducing sugar solution obtained by enzymatic saccharification of hot water washing-treated steam-exploded rice husk to ethanol. We report here the efficient production of bioethanol using steam-exploded rice husk.     

Bioconversion of cellulose into ethanol by Clostridium thermocellum--product inhibition

Direct anaerobic bioconversion of cellulosic substances into ethanol by Clostridium thermocellum ATCC 27405 has been carried out at 60 degrees C and pH 7.0 (initial for 100 L) under continuous sparging of oxygen free nitrogen in a culture vessel. Raw bagasse, mild alkali-treated bagasse, and solka floc were used as substrates. The extent of conversion of raw bagasse (cellulose, 50%; hemicellulose, 25%; lignin, 19%) was observed as 52% (w/w) and 79% (w/w) in the case of mild alkali and steam-treated bagasse (cellulose, 72%; hemicellulose, 11%; lignin, 12%), respectively. Use of bagasse concentration above 10 g/L showed a decreased rate in ethanol production. An inoculum age between 28-30 h and cell mass content of 0.027-0.036 g/L (dry basis) were used. The results obtained with raw and pretreated bagasse have been compared with those of highly pure Solka Floc (hemicellulose, 10%). Studies on the product inhibition indicated a linear fall of the percent of survivors with time. An Arrhenius type correlation between the cell decay rate constant and the product concentration was predicted. Even at low levels, the inhibitory effects of products on cell viability, the specific growth rate, and extracellular cellulase enzyme were observed.     

Pretreatments to enhance the digestibility of lignocellulosic biomass

Lignocellulosic biomass represents a rather unused source for biogas and ethanol production. Many factors, like lignin content, crystallinity of cellulose, and particle size, limit the digestibility of the hemicellulose and cellulose present in the lignocellulosic biomass. Pretreatments have as a goal to improve the digestibility of the lignocellulosic biomass. Each pretreatment has its own effect(s) on the cellulose, hemicellulose and lignin; the three main components of lignocellulosic biomass. This paper reviews the different effect(s) of several pretreatments on the three main parts of the lignocellulosic biomass to improve its digestibility. Steam pretreatment, lime pretreatment, liquid hot water pretreatments and ammonia based pretreatments are concluded to be pretreatments with high potentials. The main effects are dissolving hemicellulose and alteration of lignin structure, providing an improved accessibility of the cellulose for hydrolytic enzymes.     

Refining sweet sorghum to ethanol and sugar: economic trade-offs in the context of North China

Reducing the use of non-renewable fossil energy reserves together with improving the environment are two important reasons that drive interest in the use of bioethanol as an automotive fuel. Conversion of sugar and starch to ethanol has been proven at an industrial scale in Brazil and the United States, respectively, and this alcohol has been able to compete with conventional gasoline due to various incentives. In this paper, we examined making ethanol from the sugar extracted from the juice of sweet sorghum and/or from the hemicellulose and cellulose in the residual sorghum bagasse versus selling the sugar from the juice or burning the bagasse to make electricity in four scenarios in the context of North China. In general terms, the production of ethanol from the hemicellulose and cellulose in bagasse was more favorable than burning it to make power, but the relative merits of making ethanol or sugar from the juice was very sensitive to the price of sugar in China. This result was confirmed by both process economics and analysis of opportunity costs. Thus, a flexible plant capable of making both sugar and fuel-ethanol from the juice is recommended. Overall, ethanol production from sorghum bagasse appears very favorable, but other agricultural residues such as corn stover and rice hulls would likely provide a more attractive feedstock for making ethanol in the medium and long term due to their extensive availability in North China and their independence from other markets. Furthermore, the process for residue conversion was based on particular design assumptions, and other technologies could enhance competitiveness while considerations such as perceived risk could impede applications.     

Enzyme hydrolysis and ethanol fermentation of dilute ammonia pretreated energy cane

This study is the first one ever to report on the use of high fiber sugarcane (a.k.a. energy cane) bagasse as feedstock for the production of cellulosic ethanol. Energy cane bagasse was pretreated with ammonium hydroxide (28% v/v solution), and water at a ratio of 1:0.5:8 at 160 °C for 1 h under 0.9-1.1 MPa. Approximately, 55% lignin, 30% hemicellulose, 9% cellulose, and 6% other (e.g., ash, proteins) were removed during the process. The maximum glucan conversion of dilute ammonia treated energy cane bagasse by cellulases was 87% with an ethanol yield (glucose only) of 23 g ethanol/100 g dry biomass. The enzymatic digestibility was related to the removal of lignin and hemicellulose, perhaps due to increased surface area and porosity resulting in the deformation and swelling of exposed fibers as shown in the SEM pictures.     

降解水稻秸秆的复合菌系及其微生物群落结构演替北大核心CSCD

【目的】比较和分析从堆肥中富集的水稻秸秆降解菌系F1和F2的纤维素分解能力、微生物群落结构及其在秸秆降解过程中的演替,从而探究微生物群落结构与秸秆降解效率的相关性。【方法】采用DNS(3,5-二硝基水杨酸,3,5-dinitrosalicylic acid)定糖法测定发酵液中的外切纤维素酶活;采用范氏(Van Soest)洗涤纤维分析法测定发酵前与发酵后的秸秆纤维素、半纤维素、木质素的含量,并计算降解率;采用16S r RNA基因序列分析和实时荧光定量PCR(Quantitative real-time PCR,Q-PCR)对秸秆降解过程中的微生物物种组成及特定的功能微生物进行定性和定量分析。【结果】复合菌系F1的水稻秸秆总降解率、纤维素降解率、半纤维素降解率显著高于复合菌系F2;2种复合菌系的外切纤维素酶活性与cel48基因的拷贝数变化趋势一致;复合菌系F1的物种较丰富,优势物种是好氧细菌,复合菌系F2的物种组成较单一,培养后期具有较高比例的厌氧纤维素分解菌;培养前4天,复合菌系F1和F2的优势物种均为Unclassified Bacillales和Bacillus;第4天之后,不同复合菌系的优势物种及丰度出现差异,F1的优势物种主要属于Bacteroidetes,F2的优势物种主要属于Firmicutes;虽然Petrimonas和Pusillimonas是培养后期的共有优势物种,但是Petrimonas在复合菌系F2中的相对丰度(38.30%)显著高于F1(9.47%),且培养第8天的F2中的Clostridiales OPB54增加至14.85%。【结论】cel48基因拷贝数变化与秸秆纤维素的降解效率、外切纤维素酶活性变化具有一定的相关性,cel48基因可作为潜在的生物分子标记监测秸秆纤维素的降解过程;微生物群落结构对秸秆纤维素的降解效率具有显著影响,Unclassified Bacillales,Bacillus,Petrimonas,Pusillimonas是复合菌系F1和F2降解秸秆纤维素过程中的重要物种。     

Efficient chemical and enzymatic saccharification of the lignocellulosic residue from <Emphasis Type="Italic">Agave tequilana</Emphasis> bagasse to produce ethanol by <Emphasis Type="Italic">Pichia caribbica</Emphasis>

Bagasse of Agave tequilana (BAT) is the residual lignocellulosic waste that remains from tequila production. In this study we characterized the chemical composition of BAT, which was further saccharified and fermented to produce ethanol. BAT was constituted by cellulose (42%), hemicellulose (20%), lignin (15%), and other (23%). Saccharification of BAT was carried out at 147°C with 2% sulfuric acid for 15 min, yielding 25.8 g/l of fermentable sugars, corresponding to 36.1% of saccharificable material (cellulose and hemicellulose contents, w/w). The remaining lignocellulosic material was further hydrolyzed by commercial enzymes, ~8.2% of BAT load was incubated for 72 h at 40°C rendering 41 g/l of fermentable sugars corresponding to 73.6% of the saccharificable material (w/w). Mathematic surface response analysis of the acid and enzymatic BAT hydrolysis was used for process optimization. The results showed a satisfactory correlation (R ² = 0.90) between the obtained and predicted responses. The native yeast Pichia caribbica UM-5 was used to ferment sugar liquors from both acid and enzymatic hydrolysis to ethanol yielding 50 and 87%, respectively. The final optimized process generated 8.99 g ethanol/50 g of BAT, corresponding to an overall 56.75% of theoretical ethanol (w/w). Thus, BAT may be employed as a lignocellulosic raw material for bioethanol production and can contribute to BAT residue elimination from environment.     

Metabolic engineering applications to renewable resource utilization

Lignocellulosic materials containing cellulose, hemicellulose, and lignin are the most abundant renewable organic resource on earth. The utilization of renewable resources for energy and chemicals is expected to increase in the near future. The conversion of both cellulose (glucose) and hemicellulose (hexose and pentose) for the production of fuel ethanol is being studied intensively, with a view to developing a technically and economically viable bioprocess. Whereas the fermentation of glucose can be carried out efficiently, the bioconversion of the pentose fraction (xylose and arabinose, the main pentose sugars obtained on hydrolysis of hemicellulose), presents a challenge. A lot of attention has therefore been focused on genetically engineering strains that can efficiently utilize both glucose and pentoses, and convert them to useful compounds, such as ethanol. Metabolic strategies seek to generate efficient biocatalysts (bacteria and yeast) for the bioconversion of most hemicellulosic sugars to products that can be derived from the primary metabolism, such as ethanol. The metabolic engineering objectives so far have focused on higher yields, productivities and expanding the substrate and product spectra.     

Effect of hemicellulose and lignin removal on enzymatic hydrolysis of steam pretreated corn stover

Ethanol can be produced from lignocellulosic biomass using steam pretreatment followed by enzymatic hydrolysis and fermentation. The sugar yields, from both hemicellulose and cellulose are critical parameters for an economically-feasible ethanol production process. This study shows that a near-theoretical glucose yield (96-104%) from acid-catalysed steam pretreated corn stover can be obtained if xylanases are used to supplement cellulases during hydrolysis. Xylanases hydrolyse residual hemicellulose, thereby improving the access of enzymes to cellulose. Under these conditions, xylose yields reached 70-74%. When pre-treatment severity was reduced by using autocatalysis instead of acid-catalysed steam pretreatment, xylose yields were increased to 80-86%. Partial delignification of pretreated material was also evaluated as a way to increase the overall sugar yield. The overall glucose yield increased slightly due to delignification but the overall xylose yield decreased due to hemicellulose loss in the delignification step. The data also demonstrate that steam pretreatment is a robust process: corn stover from Europe and North America showed only minor differences in behaviour.     

Ethanol production from lignocellulosic biomass of energy cane

Ethanol produced from lignocellulosic biomass is a renewable alternative to diminishing petroleum based liquid fuels. The release of many new sugarcane varieties by the United States Department of Agriculture to be used as energy crops is a promising feedstock alternative. Energy cane produces large amounts of biomass that can be easily transported, and production does not compete with food supply and prices because energy cane can be grown on marginal land instead of land for food crops. The purpose of this study was to evaluate energy cane for lignocellulosic ethanol production. Energy cane variety L 79-1002 was pretreated with weak sulfuric acid to remove lignin. In this study, 1.4 M sulfuric acid pretreated type II energy cane had a higher ethanol yield after fermentation by Klebsiella oxytoca without enzymatic saccharification than 0.8 M and 1.6 M sulfuric acid pretreated type II energy cane. Pretreated biomass was inoculated with K. oxytoca for cellulose fermentation and Pichia stipitis for hemicellulose fermentation under simultaneous saccahrification and fermentation (SSF) and separate hydrolysis and fermentation (SHF) conditions. For enzymatic saccharification of cellulose, the cellulase and ??-glucanase cocktail significantly increased ethanol production compared to the ethanol production of fermented acid pretreated energy cane without enzymatic saccharification. The results revealed that energy cane variety L 79-1002 produced maximum cellulosic ethanol under SHF (6995 mg/L) and produced 3624 mg/L ethanol from fermentation of hemicellulosic sugars.     

Enzymatic hydrolysis of biomass from wood

Current research and development in cellulosic ethanol production has been focused mainly on agricultural residues and dedicated energy crops such as corn stover and switchgrass; however, woody biomass remains a very important feedstock for ethanol production. The precise composition of hemicellulose in the wood is strongly dependent on the plant species, therefore different types of enzymes are needed based on hemicellulose complexity and type of pretreatment. In general, hardwood species have much lower recalcitrance to enzymes than softwood. For hardwood, xylanases, beta‐xylosidases and xyloglucanases are the main hemicellulases involved in degradation of the hemicellulose backbone, while for softwood the effect of mannanases and beta‐mannosidases is more relevant. Furthermore, there are different key accessory enzymes involved in removing the hemicellulosic fraction and increasing accessibility of cellulases to the cellulose fibres improving the hydrolysis process. A diversity of enzymatic cocktails has been tested using from low to high densities of biomass (2–20% total solids) and a broad range of results has been obtained. The performance of recently developed commercial cocktails on hardwoods and softwoods will enable a further step for the commercialization of fuel ethanol from wood.     

Biotechnological production of ethanol from renewable resources by Neurospora crassa: an alternative to conventional yeast fermentations?

Microbial production of ethanol might be a potential route to replace oil and chemical feedstocks. Bioethanol is by far the most common biofuel in use worldwide. Lignocellulosic biomass is the most promising renewable resource for fuel bioethanol production. Bioconversion of lignocellulosics to ethanol consists of four major unit operations: pretreatment, hydrolysis, fermentation, and product separation/distillation. Conventional bioethanol processes for lignocellulosics apply commercial fungal cellulase enzymes for biomass hydrolysis, followed by yeast fermentation of resulting glucose to ethanol. The fungus Neurospora crassa has been used extensively for genetic, biochemical, and molecular studies as a model organism. However, the strain's potential in biotechnological applications has not been widely investigated and discussed. The fungus N. crassa has the ability to synthesize and secrete all three enzyme types involved in cellulose hydrolysis as well as various enzymes for hemicellulose degradation. In addition, N. crassa has been reported to convert to ethanol hexose and pentose sugars, cellulose polymers, and agro-industrial residues. The combination of these characteristics makes N. crassa a promising alternative candidate for biotechnological production of ethanol from renewable resources. This review consists of an overview of the ethanol process from lignocellulosic biomass, followed by cellulases and hemicellulases production, ethanol fermentations of sugars and lignocellulosics, and industrial application potential of N. crassa.     

Biological Pretreatment of Lignocellulosic Substrates for Enhanced Delignification and Enzymatic Digestibility

Sheer enormity of lignocellulosics makes them potential feedstock for biofuel production but, their conversion into fermentable sugars is a major hurdle. They have to be pretreated physically, chemically, or biologically to be used by fermenting organisms for production of ethanol. Each lignocellulosic substrate is a complex mix of cellulose, hemicellulose and lignin, bound in a matrix. While cellulose and hemicellulose yield fermentable sugars, lignin is the most recalcitrant polymer, consisting of phenyl-propanoid units. Many microorganisms in nature are able to attack and degrade lignin, thus making access to cellulose easy. Such organisms are abundantly found in forest leaf litter/composts and especially include the wood rotting fungi, actinomycetes and bacteria. These microorganisms possess enzyme systems to attack, depolymerize and degrade the polymers in lignocellulosic substrates. Current pretreatment research is targeted towards developing processes which are mild, economical and environment friendly facilitating subsequent saccharification of cellulose and its fermentation to ethanol. Besides being the critical step, pretreatment is also cost intensive. Biological treatments with white rot fungi and Streptomyces have been studied for delignification of pulp, increasing digestibility of lignocellulosics for animal feed and for bioremediation of paper mill effluents. Such lignocellulolytic organisms can prove extremely useful in production of bioethanol when used for removal of lignin from lignocellulosic substrate and also for cellulase production. Our studies on treatment of hardwood and softwood residues with Streptomyces griseus isolated from leaf litter showed that it enhanced the mild alkaline solubilisation of lignins and also produced high levels of the cellulase complex when growing on wood substrates. Lignin loss (Klason lignin) observed was 10.5 and 23.5% in case of soft wood and hard wood, respectively. Thus, biological pretreatment process for lignocellulosic substrate using lignolytic organisms such as actinomycetes and white rot fungi can be developed for facilitating efficient enzymatic digestibility of cellulose.     

白腐真菌血红密孔菌漆酶复合酶预处理烟梗丝的响应面法优化

烟梗是烟草工业的重要副产物,也是宝贵的自然资源。本研究首先利用白腐菌漆酶对烟梗丝进行预处理,提升了添加烟梗丝的卷烟品质;然后分别以木质素、纤维素、半纤维素和果胶的降解率为响应值,采用Box-Behnken设计建立方程模型,对漆酶、纤维素酶、半纤维素酶和果胶酶组成的复合酶预处理烟梗丝条件进行了优化。结果表明：每100g烟梗丝加入30U漆酶,在料液比为35%、温度为30℃、酶解pH为5处理48h的条件下预处理的烟梗丝对提升卷烟品吸效果最佳,烟梗丝中木质素、纤维素、半纤维素和果胶的降解率分别为20.16%、15.10%、7.20%和12.40%;为获得与之相同的各组分降解率,响应面法优化漆酶复合酶最佳处理条件为：每100g烟梗丝加入漆酶14.72U、纤维素酶1.00U、半纤维素酶1.00U、果胶酶8.45U。验证发现烟梗丝各组分降解率实测值与理论值无显著性差异,且显微结构观察显示复合酶处理后的烟梗丝表面致密结构被破坏,孔洞数量明显增加。本研究获得的白腐菌漆酶预处理后的烟梗丝在卷烟中的添加能有效改善卷烟品质,且漆酶复合酶的使用大幅减少了漆酶的用量,降低了漆酶预处理烟梗丝的成本,为废弃烟梗生物质的资源化利用提供了重要依据。     

Pretreatment and Lignocellulosic Chemistry

Lignocellulosic materials such as wood, grass, and agricultural and forest residues are promising alternative energy resources that can be utilized to produce ethanol. The yield of ethanol production from native lignocellulosic material is relatively low due to its native recalcitrance, which is attributed to, in part, lignin content/structure, hemicelluloses, cellulose crystallinity, and other factors. Pretreatment of lignocellulosic materials is required to overcome this recalcitrance. The goal of pretreatment is to alter the physical features and chemical composition/structure of lignocellulosic materials, thus making cellulose more accessible to enzymatic hydrolysis for sugar conversion. Various pretreatment technologies to reduce recalcitrance and to increase sugar yield have been developed during the past two decades. This review examines the changes in lignocellulosic structure primarily in cellulose and hemicellulose during the most commonly applied pretreatment technologies including dilute acid pretreatment, hydrothermal pretreatment, and alkaline pretreatment.