Structural and functional organization of ColE2 and ColE3 replicons

Summary The complete nucleotide sequences of the 1.5 kb regions of ColE2 and ColE3 plasmids containing the segments sufficient for autonomous replication have been determined. They are quite homologous (greater than 90%), indicating that these two plasmids share common mechanisms of initiation of replication and its regulation. An open reading frame with a coding capacity for a protein of about 300 amino acids is present in both ColE2 and ColE3 and it actually specifies the Rep (for replication) protein, which is the plasmid specific trans-acting factor required for autonomous replication. The amino acid sequences of the Rep proteins of ColE2 and ColE3 are quite homologous (greater than 90%). The cis-acting sites (origins) where replication initiates in the presence of the trans-acting factors consist of 32 bp for ColE2 and 33 bp for ColE3. They are the smallest of all the prokaryotic replication origins so far reported. They are nonhomologous only at two positions, one of which, a deletion of a single nucleotide in ColE2 (or an insertion in ColE3), determines the plasmid specificity in interaction of the origins with the Rep proteins. Both plasmids carry a region with an identical nucleotide sequence and the one in ColE2, the IncA region, has been shown to express incompatibility against both ColE2 and ColE3. These results indicate that these plasmids share a common IncA determinant. A possibility that a small antisense RNA is involved in copy number control and incompatibility (IncA function) was suggested.     

Replication of ColE2 and ColE3 plasmids: The regions sufficient for autonomous replication

Summary We have localized the regions sufficient for autonomous replication on the genomes of the colicin E2 (ColE2) and colicin E3 (ColE3) plasmids and analyzed the replication functions carried by these regions. A 1.3 kb segment of each plasmid is sufficient for autonomous replication. Plasmids carrying this segment retain the replication properties of the original plasmid. The 1.3 kb segment consists of three functional portions. Firstly, a 0.9 kb region which specifies at least one trans-acting factor required for replication of each plasmid. Secondly, a 0.4 kb region located adjacent to one end of the 0.9 kb region, which is required for expression of the trans-acting factor(s) and probably contains the promoter. The region across the border of these two portions of ColE2 is involved in copy number control of the plasmid. The third portion is a 50 bp region adjacent to the other end of the 0.9 kb region, which contains a cis-acting site (origin) where replication initiates in the presence of the trans-acting factor(s). The action of the trans-acting factor(s) on the origin is plasmid specific. The 50 bp regions functioning as the origins of replication of ColE2 and ColE3 are the smallest among those in prokaryotic replicons so far identified and analyzed.     

Replication of ColE2 and ColE3 plasmids In vitro replication dependent on plasmid-coded proteins

Summary We developed an in vitro replication system for ColE2 and ColE3 plasmids using cell extracts prepared from bacteria with or without these plasmids. DNA synthesis depended on host DNA polymerase I and was sensitive to rifampicin and chloramphenicol. Preincubation of the extracts with plasmid DNA, however, allowed replication of template DNA added subsequently in a plasmid-specific manner in the presence of rifampicin and chloramphenicol. The plasmid-specified trans-acting factor(s) was detected in cell extracts from bacteria carrying a recombinant plasmid with the region of ColE2 or ColE3 encoding the Rep protein. The plasmid-specified factor(s) consisted at least in part of protein, probably the Rep protein. In vitro replication started within a region of ColE2 or ColE3 containing the smallest cis-acting segment essential for in vivo replication and proceeded in a fixed direction.     

Comparative analysis of the replicon regions of eleven ColE2-related plasmids.

The incA gene product of ColE2-P9 and ColE3-CA38 plasmids is an antisense RNA that regulates the production of the plasmid-coded Rep protein essential for replication. The Rep protein specifically binds to the origin and synthesizes a unique primer RNA at the origin. The IncB incompatibility is due to competition for the Rep protein among the origins of the same binding specificity. We localized the regions sufficient for autonomous replication of 15 ColE plasmids related to ColE2-P9 and ColE3-CA38 (ColE2-related plasmids), analyzed their incompatibility properties, and determined the nucleotide sequences of the replicon regions of 9 representative plasmids. The results suggest that all of these plasmids share common mechanisms for initiation of DNA replication and its control. Five IncA specificity types, 4 IncB specificity types, and 9 of the 20 possible combinations of the IncA and IncB types were found. The specificity of interaction of the Rep proteins and the origins might be determined by insertion or deletion of single nucleotides and substitution of several nucleotides at specific sites in the origins and by apparently corresponding insertion or deletion and substitution of amino acid sequences at specific regions in the C-terminal portions of the Rep proteins. For plasmids of four IncA specificity types, the nine-nucleotide sequences at the loop regions of the stem-loop structures of antisense RNAs are identical, suggesting an evolutionary significance of the sequence. The mosaic structures of the replicon regions with homologous and nonhomologous segments suggest that some of them were generated by exchanging functional parts through homologous recombination.     

Sequence heterogeneity and differential expression of the α-Amy2 gene family in wheat

Summary Within plasmid pUB110 we have identified a 1.2 kb segment necessary and sufficient for driving autonomous replication in Rec⁺ cells at a wild-type copy number. This region can be divided into three functionally discrete segments: a 24 base pair (bp) region that acts as an origin, a 949 bp determinant of an essential replication protein, repU, and a 358 bp incompatibility region, incA, overlapping with the repU gene. The synthesis of the IncA determinant/s proceeds in the direction opposite to that of RepU. The positively (RepU) and negatively (IncA) trans-acting products seem to be involved in the control of plasmid replication. The RepU product has an M_r of 39 kDa, could be overproduced in Escherichia coli, and binds to the pUB110 origin region. Outside the minimal replicon a cis-acting, orientation dependent, 516 bp determinant is required (i) to compete with a coexisting incompatible plasmid and (ii) for segregational stability.     

Isolation and characterization of pHW15, a small cryptic plasmid from Rahnella genomospecies 2

A small cryptic plasmid designated pHW15 was isolated from Rahnella genomospecies 2 WMR15 and its complete nucleotide sequence was determined. The plasmid contained 3002 bp with a G+C content of 47.4%. The origin of replication was identified by deletion analysis as a region of about 600 bp. This region had an identity of 70% to the replication origin of the ColE1 plasmid at the nucleotide level. Sequence analysis revealed the typical elements: RNA I, RNA II and their corresponding promoters, a sequence allowing hybridisation of RNA II to the DNA and favouring processing by RNaseH, a single-strand initiation determinant (ssi) that allows initiation of lagging-strand synthesis, and a terH sequence required for termination of lagging-strand synthesis. The plasmid contained three expressed open reading frames, one of which showed homology to a ColE1 plasmid-encoded protein. Furthermore, a multimer resolution site was identified by sequence analysis. Its deletion resulted in formation of plasmid multimers during growth leading to an increased plasmid loss rate.     

Nucleotide sequences from the colicin E5, E6 and E9 operons: Presence of a degenerate transposon-like structure in the ColE9-J plasmid

Summary The nucleotide sequences of 1288 bp of plasmid ColE5-099, 1609 bp of ColE6-CT14 and 2099 bp of ColE9-J were determined. These sequences encompass the structural genes for the C-terminal receptor-binding and nuclease domains of colicins E5, E6 and E9, theircis- ortrans-acting immunity proteins and four lysis proteins including an atypical one of non-lipoprotein nature (Lys^*) present in the ColE9-J plasmid. The ColE6 gene organisation, in the ordercol-imm-E8imm-lys, is identical to that found in the previously described double-immunity gene system of ColE3-CA38 (an RNase producer). The corresponding genes in the two plasmids are 87%–94% homologous. In ColE9-J, the genes are organised ascol-imm-lys ^*-E5imm-lys. The E9col-imm gene pair is homologous to the colicin E2-P9 type (a DNase producer). Downstream from E9imm is an E5imm (designated E5imm[E9]) which istrans-acting. Neither the predicted structures of E5Imm[E9] nor thecis-acting Imm resident in the ColE5-099 plasmid which differs by a single amino acid shows any resemblance to other immunity structures which have been sequenced. Furthermore, the E5col sequences differ from those predicted previously for other colicins except for the conservedbtuB-specified receptor-binding domain. A novel 205 nucleotide long insertion sequence is found in the ColE9-J plasmid. This insertion sequence, which we named ISE9, has features reminiscent of the degenerate transposon IS101 previously found in plasmid pSC101. One effect of ISE9 is the presence of the atypical lysis gene,lys ^*. The presence of a transposon-like element in the ColE9 plasmid exemplifies a new phenomenon relevant to the evolution of colicin E plasmids. Issued as NRCC publication no. 30065     

ColE1 plasmid incompatibility: localization and analysis of mutations affecting incompatibility.

Deletion mutants of plasmid ColE1 that involve the replication origin and adjacent regions of the plasmid have been studied to determine the mechanism by which those mutations affect the expression of plasmid incompatibility. It was observed that (i) a region of ColE1 that is involved in the expression of plasmid incompatibility lies between base pairs -185 and -684; (ii) the integrity of at least part of the region of ColE1 DNA between base pairs -185 and -572 is essential for the expression of ColE1 incompatibility; (iii) the expression of incompatibility is independent of the ability of the ColE1 genome to replicate autonomously; (iv) plasmid incompatibility is affected by plasmid copy number; and (v) ColE1 plasmid-mediated DNA replication of the lambda phage-ColE1 chimera lambda imm434 Oam29 Pam3 ColE1 is inhibited by ColE1-incompatible but not by ColE1-compatible plasmids.     

Re-examination of the ColE1 DNA regions essential for autonomous replication and their functions

Starting from pAO3, a plasmid consisting of a quarter of colicinogenic factor E1 (ColE1) DNA, various small ColE1 derivatives were constructed by in vitro recombination and their ability to achieve autonomous replication was examined. The 436 base pair HaeIII-C fragment of pAO3 contained information for replication when it was recombined with the non-replicating Amp fragment. However, when it was connected to other DNA fragments, the resulting hybrid molecules were not isolated as plasmids. The present results indicate that the additional region of about 240 base pairs next to the HaeIII-C fragment of ColE1 is also essential for the maintenance of a plasmid state. Moreover, using various small ColE1 derivatives, the DNA region responsible for the interference and incompatibility functions of ColE1 DNAs was located. The results indicate that the interference and incompatibility functions are coded by the same ColE1 DNA segment and are not essential for the maintenance of a plasmid state.     

The Rep protein binding elements of the plasmid ColE2-P9 replication origin

The plasmid ColE2-P9 (ColE2) origin (32bp) is specifically recognized by the plasmid-specified Rep protein that initiates DNA replication. The ColE2 origin is divided into at least three functional subregions (I, II, and III), and three sites (a, b, and c) found in subregions I and II play important roles in Rep protein binding. We performed SELEX experiments of plasmid ColE2 to determine the optimal sequences for specific binding of the Rep protein. From these experiments, we obtained a common 16-bp sequence (5'-TGAGACCANATAAGCC-3'), which corresponds to about one half of the minimal ColE2 origin and contains sites a and b. Gel mobility shift assays using single-point mutant origins and the Rep protein further indicated that high affinity sequence-specific recognition by the Rep protein requires sites a, b, and c, but that mutations in site c were less disruptive to this recognition than those in sites a and b.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Salmonella enterica subsp. enterica serovar Enteritidis harbours ColE1, ColE2, and rolling-circle-like replicating plasmids

Using DNA hybridization, at least three distinct groups of low molecular mass plasmids were identified in Salmonella enterica subsp. enterica serovar Enteritidis. After sequencing representative plasmids from each group, we concluded that they belonged to ColE1, ColE2, and rolling-circle-like replicating plasmids. Plasmid pK (4245 bp) is a representative of widely distributed ColE1 plasmids. Plasmid pP (4301 bp) is homologous to ColE2 plasmids and was present predominantly in single-stranded DNA form. The smallest plasmids pJ (2096 bp) and pB (1983 bp) were classified as rolling-circle-like replicating plasmids. Both encoded only a single protein essential for their own replication, and they must have existed in an unusual molecular structure, as (i) they were capable of hybridization without denaturation, (ii) their DNA could be linearized with S1 nuclease, and (iii) even after such treatment, the ability to hybridize without denaturation did not disappear.     

Incompatibility and transforming efficiency of ColE1 and related plasmids

Summary Replicons derived from the ColE1 plasmid are incompatible with one another, but are compatible with their naturally occurring relatives ColK and CloDF13. The incompatibility results in loss, by segregation, of one or the other ColE1 plasmid. In most cases, the smaller derivatives tend to displace the larger ones, and the rate of displacement depends on the difference in size. One mini-plasmid retains only 19% of the sequences of ColE1, yet it exrrts strong incompatibility: other ColE1 plasmids are rapidly lost when it is introduced into the host. The region essential for ColE1 incompatibility is deduced to lie within 700 base pairs of the origin of replication.The transforming efficiency of any ColE1 plasmid is markedly lowered when another incompatible replicon is resident in the competent cells, even when the transforming plasmid is much smaller than the resident.A model of incompatibility is proposed to account for these effects.     

Nucleotide sequence of the region of the origin of replication of the broad host range plasmid RK2

Summary A DNA sequence cosisting of 617 base pairs (bp) from the region of the origin of replication of the broad-host range plasmid RK2 has been determined. Included within this sequence is a 393 bp HpaII restriction fragment that provides a functional origin or replication when other essential RK2 specified functions are provided in trans. Also contained in this sequence is a region, distinguished functionally from the replication origin, which is involved in the expression of inc ₂ incompatibility, i.e., the ability of derivatives of RK2 to eliminate a resident RK2 plasmid. The 617 bp sequence includes eight 17 base pair direct repeats with 5 located within the region required for a functional replication origin and 3 within the region involved in inc ₂ incompatibility. In addition, a 40 bp region rich in A-T followed by a 60 bp stretch having a high G+C content is present. Deletion evidence indicates that the A-T rich and possibly the G+C regions are required for a functional replication origin. Based on the evidence contained in this and the preceding paper (Thomas et al. 1980 b) a model will be presented for the involvement of these specific sequences in the initiation of RK2 DNA replication, plasmid maintenance and plasmid incompatibility.     

Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.     

Isolation and sequence analysis of a small cryptic plasmid pRK10 from a corrosion inhibitor degrading strain Serratia marcescens ACE2

The nucleotide sequence of a smallest cryptic plasmid pRK10 of Serratia marcescens ACE2 was determined. When compared to the all other plasmids reported so far from S. marcescens in sizes of over 70 kb, pRK10 is only 4241 bp long with 53% G + C content and has five coding sequences representing a coding percentage of 65.41. This small plasmid consists of one Tdh gene, four mobilization genes, mobCABD, and an origin of replication homologous to those of ColE1-type plasmids. Analysis of the five open reading frames identified on the plasmid suggests the presence of genes involved in replication and mobilization containing sequences homologous to the bom region and mobCABD genes of ColE1 and Tdh from Acinetobacter baumannii str. AYE. Results also indicate that pRK10 does not encode any gene for antibiotic/heavy metal resistance. Copy number and incompatibility of the plasmid with plasmids of ColE1 origin of replication was determined and it is quite stable in its natural host as well as in Escherichia coli DH5α. This relatively small plasmid will be useful for construction of shuttle vectors to facilitate the genetic analysis.     

Adenosine monophosphate-induced amplification of ColE1 plasmid DNA in Escherichia coli

ColE1 plasmid copy number was analyzed in relaxed (relA) and stringent (relA(+)) Escherichia coli cells after supplementation of culture media with adenosine monophosphate (AMP). When a relaxed E. coli strain bearing ColE1 plasmid was cultured in LB medium for 18 h and induced with AMP for 4h, the plasmid DNA yield was significantly increased, from 2.6 to 16.4 mgl(-1). However no AMP-induced amplification of ColE1 plasmid DNA was observed in the stringent host. Some plasmid amplification was observed in relA mutant cultures in the presence of adenosine, while adenine, ADP, ATP, ribose, potassium pyrophosphate and sodium phosphate caused a minor, if any, increase in ColE1 copy number. A mechanism for amplification of ColE1 plasmid DNA with AMP in relA mutant bacteria is suggested, in which AMP interferes with the aminoacylation of tRNAs, increases the abundance of uncharged tRNAs, and uncharged tRNAs promote plasmid DNA replication. According to this proposal, in relA(+) cells, the AMP induction could not increase ColE1 plasmid copy number because of lower abundance of uncharged tRNAs. Our results suggest that the induction with AMP can be used as an effective method of amplification of ColE1 plasmid DNA in relaxed strains of E. coli.     

Copy number control and incompatibility of plasmid R1: Identification of a protein that seems to be involved in both processes

Summary Investigations into the genetic determinants for incompatibility of miniplasmids and hybrid replicons constructed from wild type and mutant R1 revealed the presence of an incompatibility function at the junction of two small PstI fragments. These two fragments were not distinguished in earlier experiments since they have the same mobility on agarose gels. This incompatibility function is distinct from other inc-determinants of R1 (Kollek and Goebel 1979; Molin and Nordström, 1980) and independent of R1-type replication. By means of specific deletions and subcloning of DNA fragments, the location of this new inc-determinant could be determined further. After deletion of this inc-determinant from miniplasmids, a 5-fold increase in copy number was observed which could then be reduced to a copy number of about 1 plasmid per cell by complementation with hybrid plasmids having this function. Incompatibility of miniplasmids deleted in this determinant is not reduced, whereas analogous deletions introduced into recombinant plasmids nearly abolish their incompatibility. This determinant seems to exert strong incompatibility only when cloned on pBR322. Therefore, its main function in plasmid R1 is probably restricted to copy control. The appearance of low copy numbers of miniplasmids carrying this determinant and of trans-acting copy control and strong incompatibility exerted by hybrid plasmids is consistently correlated with the presence of a protein of 11,000 molecular weight, synthesized in relatively large amounts in Escherichia coli minicells.     

Plasmid ColE1 conjugal mobility: the nature of bom, a region required in cis for transfer

Summary Conjugal mobility of ColE1 and related plasmids is promoted by a wide range of conjugative plasmids. ColE1 produces trans-acting products and has a region required in cis (bom; basis of mobility) for such mobility. Here we show that plasmid pBR322 contains a functional bom sequence located within a 141 bp HhaI fragment. This bom region is functional for conjugation promoted by several different conjugative plasmids and is highly conserved in ColE1 and contains nic the putative origin of transfer. The orientation and position of bom with respect to the ColE1 vegetative origin of replication can be changed without affecting the frequency of conjugal mobility promoted by R64drd11.