Combination of newly developed SNP and InDel markers for genotyping the <Emphasis Type="Italic">Cf-9</Emphasis> locus conferring disease resistance to leaf mold disease in the tomato

The Cf-9 gene in the tomato is known to confer resistance against leaf mold disease caused by Cladosporium fulvum, and a gene-based marker targeted to the Cf-9 allele has been widely used as a crop protection approach. However, we found this marker to be misleading in genotyping. Therefore, we developed new single-nucleotide polymorphism (SNP) and insertion and deletion (InDel) markers targeted to the Cf-9 allele in order to increase genotyping accuracy and facilitate high-throughput screening. The DNA sequences of reported Cf-9, cf-9, Cf-0, and closely related Cf-4 alleles were compared, and two functional and non-synonymous SNPs were found to distinguish the Cf-9 resistance allele from the cf-9, Cf-0, and Cf-4 alleles. An SNP marker including these two SNPs was developed and applied to the genotyping of 33 tomato cultivars by high-resolution melting analysis. Our SNP marker was able to select all three Cf-9 genotypes (resistant, heterozygous, and susceptible alleles). Interestingly, two cultivars were grouped separately from these three genotypes. To further examine this outgroup, we preformed polymerase chain reaction (PCR) on two InDel regions identified by sequence comparison of the Cf-9 and Cf-4 genes. The band patterns revealed that these two cultivars carried Cf-4 rather than Cf-9 alleles and that three cultivars classified in the Cf-9 resistance group actually carried both Cf-9 and Cf-4 genes. To determine whether these genotyping results were consistent with disease resistance phenotypes, we examined the induction of a hypersensitive response by transiently expressing the corresponding effector genes, and found that the results matched perfectly with the genotyping results. These findings indicate that the combination of our SNP and InDel markers allows resistant Cf-9 alleles to be distinguished from cf-9 and Cf-4 alleles, which will be useful for marker-assisted selection of tomato cultivars resistant to C. fulvum.     

Adult plant stripe rust resistance gene <Emphasis Type="Italic">Yr71</Emphasis> maps close to <Emphasis Type="Italic">Lr24</Emphasis> in chromosome 3D of common wheat

Australian cultivar Sunco carries three adult plant stripe rust resistance genes. One of these genes corresponded to Yr18 in chromosome 7DS; the second, YrCK, was mapped on chromosome 2D. Here, we describe the characterization of the third adult plant resistance (APR) gene from Sunco. Sunco/2*Avocet S-derived lines SA65 (resistant) and SA67 (susceptible) were crossed and a recombinant inbred line F₆ population was generated. Monogenic segregation among SA65/SA67-derived RIL population was demonstrated and the resistance locus was designated YrSA3. Selective genotyping using an iSelect 90 K Infinium SNP array and SSR markers located YrSA3 on chromosome 3D. Development of KASP markers for SNP loci showing association with YrSA3 allowed construction of a genetic map harboring the resistance gene. Ten KASP markers (KASP_8306, KASP_9142, KASP_10438, KASP_16434, KASP_17207, KASP_20836, KASP_23518, KASP_23615, KASP_57983 and KASP_63653), one SSR marker (gwm114b) and Lr24/Sr24 were mapped 1.8 cM distal to YrSA3. Comparison of marker data indicated that the previously named seedling stripe rust resistance gene Yr45 was located proximal to YrSA3, and therefore the latter was formally designated Yr71. Two recombinants carrying Lr24/Sr24 and Yr71 in combination were identified for use as donor sources in wheat breeding programs. The robustness of gwm114b, KASP_16434, KASP_17207 and KASP_20836 for marker-assisted selection of these genes was demonstrated through tests on 74 Australian wheat cultivars.     

Mapping of common bunt resistance gene <Emphasis Type="Italic">Bt9</Emphasis> in wheat

Key message

The Bt9 resistance locus was mapped and shown to be distinct from the Bt10 locus. New markers linked to Bt9 have been identified and may be used to breed for resistance towards the seed-borne disease.

Abstract

Increasing organic wheat production in Denmark, and in other wheat-producing areas, in conjunction with legal requirements for organic seed production, may potentially lead to a rise in common bunt occurrence. As systemic pesticides are not used in organic farming, organic wheat production systems may benefit from genetic resistances. However, little is known about the underlying genetic mechanisms and locations of the resistance factors for common bunt resistance in wheat. A double haploid (DH) population segregating for common bunt resistance was used to identify the chromosomal location of common bunt resistance gene Bt9. DH lines were phenotyped in three environments and genotyped with DArTseq and SSR markers. The total length of the resulting linkage map was 2882 cM distributed across all 21 wheat chromosomes. Bt9 was mapped to the distal end of chromosome 6DL. Since wheat common bunt resistance gene Bt10 is also located on chromosome 6D, the possibility of their co-location was investigated. A comparison of marker sequences linked to Bt9 and Bt10 on physical maps of chromosome 6D confirmed that Bt9 and Bt10 are two distinct resistance factors located at the distal (6DL) and proximal (6DS) end, respectively, of chromosome 6D. Five new SSR markers Xgpw4005-1, Xgpw7433, Xwmc773, Xgpw7303 and Xgpw362 and many SNP and PAV markers flanking the Bt9 resistance locus were identified and they may be used in the future for marker-assisted selection.

     

Mapping and identification of a potential candidate gene for a novel maturity locus, <Emphasis Type="Italic">E10</Emphasis>, in soybean

Key message

E10 is a new maturity locus in soybean and FT4 is the predicted/potential functional gene underlying the locus.

Abstract

Flowering and maturity time traits play crucial roles in economic soybean production. Early maturity is critical for north and west expansion of soybean in Canada. To date, 11 genes/loci have been identified which control time to flowering and maturity; however, the molecular bases of almost half of them are not yet clear. We have identified a new maturity locus called “E10” located at the end of chromosome Gm08. The gene symbol E10e10 has been approved by the Soybean Genetics Committee. The e10e10 genotype results in 5–10 days earlier maturity than E10E10. A set of presumed E10E10 and e10e10 genotypes was used to identify contrasting SSR and SNP haplotypes. These haplotypes, and their association with maturity, were maintained through five backcross generations. A functional genomics approach using a predicted protein–protein interaction (PPI) approach (Protein–protein Interaction Prediction Engine, PIPE) was used to investigate approximately 75 genes located in the genomic region that SSR and SNP analyses identified as the location of the E10 locus. The PPI analysis identified FT4 as the most likely candidate gene underlying the E10 locus. Sequence analysis of the two FT4 alleles identified three SNPs, in the 5′UTR, 3′UTR and fourth exon in the coding region, which result in differential mRNA structures. Allele-specific markers were developed for this locus and are available for soybean breeders to efficiently develop earlier maturing cultivars using molecular marker assisted breeding.

     

Inheritance and gene mapping of the white flower trait in <Emphasis Type="Italic">Brassica juncea</Emphasis>

Despite being a unique marker trait, white flower inheritance in Brassica juncea remains poorly understood at the gene level. In this study, we investigated a B. juncea landrace with white petal in China. The white petal phenotype possessed defective chromoplasts with less plastoglobuli than the yellow petal phenotype. Genetic analysis confirmed that two independent recessive genes (Bjpc1 and Bjpc2) controlled the white flower trait. We then mapped the BjPC1 gene in a BC₄ population comprising 2295 individuals. We identified seven AFLP (amplified fragment length polymorphism) markers closely linked to the white flower gene. BLAST search revealed the sequence of AFLP fragments were highly homologous with the Scaffold000085 and Scaffold000031 sequences on the A02 chromosome in the Brassica rapa genome. Based on this sequence homology, we developed simple sequence repeat (SSR) primer pairs and identified 13 SSRs linked to the BjPC1 gene, including two that were co-segregated (SSR9 and SSR10). The two closest markers (SSR4 and SSR11) were respectively 0.9 and 0.4 cM on either side of BjPC1. BLAST analysis revealed that these marker sequences corresponded highly to A02 in B. juncea. They were mapped within a 33 kb genomic region on B. rapa A02 (corresponds to a 40 kb genomic region on B. juncea A02) that included three genes. Sequence BjuA008406, homologous to AtPES2 in Arabidopsis thaliana and Bra032956 in B. rapa, was the most likely candidate for BjPC1. These results should accelerate BjPC1 cloning and facilitate our understanding of the molecular mechanisms controlling B. juncea petal color.     

Molecular mapping of a new temperature-sensitive gene <Emphasis Type="Italic">LrZH22</Emphasis> for leaf rust resistance in Chinese wheat cultivar Zhoumai 22

Leaf rust, caused by Puccinia triticina, is one of the most widespread diseases in common wheat globally. The Chinese wheat cultivar Zhoumai 22 is highly resistant to leaf rust at the seedling and adult stages. Seedlings of Zhoumai 22 and 36 lines with known leaf rust resistance genes were inoculated with 13 P. triticina races for gene postulation. The leaf rust response of Zhoumai 22 was different from those of the single gene lines. With the objective of identifying and mapping, the new gene(s) for resistance to leaf rust, F₁, F₂ plants and F_2:3 lines from the cross Zhoumai 22/Chinese Spring were inoculated with Chinese P. triticina race FHDQ at the seedling stage. A single dominant gene, tentatively designated LrZH22, conferred resistance. To identify other possible genes in Zhoumai 22, ten P. triticina races avirulent on Zhoumai 22 were used to inoculate 24 F_2:3 lines. The same gene conferred resistance to all ten avirulent races. A total of 1300 simple sequence repeat (SSR) markers and 36 EST markers on 2BS were used to test the parents, and resistant and susceptible bulks. Resistance gene LrZH22 was mapped in the chromosome bin 2BS1-0.53-0.75 and closely linked to six SSR markers (barc183, barc55, gwm148, gwm410, gwm374 and wmc474) and two EST markers (BF202681 and BE499478) on chromosome arm 2BS. The two closest flanking SSR loci were Xbarc55 and Xgwm374 with genetic distances of 2.4 and 4.8 cM from LrZH22, respectively. Six designated genes (Lr13, Lr16, Lr23, Lr35, Lr48 and Lr73) are located on chromosome arm 2BS. In seedling tests, LrZH22 was temperature sensitive, conferring resistance at high temperatures. The reaction pattern of Zhoumai 22 was different from that of RL 4031 (Lr13), RL 6005 (Lr16) and RL 6012 (Lr23), Lr35 and Lr48 are adult-plant resistance genes, and Lr73 is not sensitive to the temperature. Therefore, LrZH22 is likely to be a new leaf rust resistance gene or allele.     

Fine mapping of the chromosome 5B region carrying closely linked rust resistance genes <Emphasis Type="Italic">Yr47</Emphasis> and <Emphasis Type="Italic">Lr52</Emphasis> in wheat

Key message

Fine mapping of Yr47 and Lr52 in chromosome arm 5BS of wheat identified close linkage of the marker sun180 to both genes and its robustness for marker-assisted selection was demonstrated.

Abstract

The widely effective and genetically linked rust resistance genes Yr47 and Lr52 have previously been mapped in the short arm of chromosome 5B in two F₃ populations (Aus28183/Aus27229 and Aus28187/Aus27229). The Aus28183/Aus27229 F₃ population was advanced to generate an F₆ recombinant inbred line (RIL) population to identify markers closely linked with Yr47 and Lr52. Diverse genomic resources including flow-sorted chromosome survey sequence contigs representing the orthologous region in Brachypodium distachyon, the physical map of chromosome arm 5BS, expressed sequence tags (ESTs) located in the 5BS6-0.81-1.00 deletion bin and resistance gene analog contigs of chromosome arm 5BS were used to develop markers to saturate the target region. Selective genotyping was also performed using the iSelect 90 K Infinium wheat SNP assay. A set of SSR, STS, gene-based and SNP markers were developed and genotyped on the Aus28183/Aus27229 RIL population. Yr47 and Lr52 are genetically distinct genes that mapped 0.4 cM apart in the RIL population. The SSR marker sun180 co-segregated with Lr52 and mapped 0.4 cM distal to Yr47. In a high resolution mapping population of 600 F₂ genotypes Yr47 and Lr52 mapped 0.2 cM apart and marker sun180 was placed 0.4 cM distal to Lr52. The amplification of a different sun180 amplicon (195 bp) than that linked with Yr47 and Lr52 (200 bp) in 204 diverse wheat genotypes demonstrated its robustness for marker-assisted selection of these genes.

     

Discovery and introgression of the wild sunflower-derived novel downy mildew resistance gene <Emphasis Type="Italic">Pl</Emphasis><Subscript><Emphasis Type="Italic">19</Emphasis></Subscript> in confection sunflower (<Emphasis Type="Italic">Helianthus annuus</Emphasis> L.)

Key message

A new downy mildew resistance gene, Pl ₁₉ , was identified from wild Helianthus annuus accession PI 435414, introduced to confection sunflower, and genetically mapped to linkage group 4 of the sunflower genome.

Abstract

Wild Helianthus annuus accession PI 435414 exhibited resistance to downy mildew, which is one of the most destructive diseases to sunflower production globally. Evaluation of the 140 BC₁F_2:3 families derived from the cross of CMS CONFSCLB1 and PI 435414 against Plasmopara halstedii race 734 revealed that a single dominant gene controls downy mildew resistance in the population. Bulked segregant analysis conducted in the BC₁F₂ population with 860 simple sequence repeat (SSR) markers indicated that the resistance derived from wild H. annuus was associated with SSR markers located on linkage group (LG) 4 of the sunflower genome. To map and tag this resistance locus, designated Pl ₁₉ , 140 BC₁F₂ individuals were used to construct a linkage map of the gene region. Two SSR markers, ORS963 and HT298, were linked to Pl ₁₉ within a distance of 4.7 cM. After screening 27 additional single nucleotide polymorphism (SNP) markers previously mapped to this region, two flanking SNP markers, NSA_003564 and NSA_006089, were identified as surrounding the Pl ₁₉ gene at a distance of 0.6 cM from each side. Genetic analysis indicated that Pl ₁₉ is different from Pl ₁₇ , which had previously been mapped to LG4, but is closely linked to Pl ₁₇ . This new gene is highly effective against the most predominant and virulent races of P. halstedii currently identified in North America and is the first downy mildew resistance gene that has been transferred to confection sunflower. The selected resistant germplasm derived from homozygous BC₂F₃ progeny provides a novel gene for use in confection sunflower breeding programs.

     

An NB-LRR gene, <Emphasis Type="Italic">TYNBS1</Emphasis>, is responsible for resistance mediated by the <Emphasis Type="Italic">Ty</Emphasis>-<Emphasis Type="Italic">2 Begomovirus</Emphasis> resistance locus of tomato

Key message

An NB-LRR gene, TYNBS1, was isolated from Begomovirus-resistance locus Ty-2. Transgenic plant analysis revealed that TYNBS1 is a functional resistance gene. TYNBS1 is considered to be synonymous with Ty-2.

Abstract

Tomato yellow leaf curl disease caused by Tomato yellow leaf curl virus (TYLCV) is a serious threat to tomato (Solanum lycopersicum L.) production worldwide. A Begomovirus resistance gene, Ty-2, was introduced into cultivated tomato from Solanum habrochaites by interspecific crossing. To identify the Ty-2 gene, we performed genetic analysis. Identification of recombinant line 3701 confirmed the occurrence of a chromosome inversion in the Ty-2 region of the resistant haplotype. Genetic analysis revealed that the Ty-2 gene is linked to an introgression encompassing two markers, SL11_25_54277 and repeat A (approximately 200 kb). Genomic sequences of the upper and lower border of the inversion section of susceptible and resistant haplotypes were determined. Two nucleotide-binding domain and leucine-rich repeat-containing (NB-LRR) genes, TYNBS1 and TYNBS2, were identified around the upper and lower ends of the inversion section, respectively. TYNBS1 strictly co-segregated with TYLCV resistance, whereas TYNBS2 did not. Genetic introduction of genomic fragments containing the TYNBS1 gene into susceptible tomato plants conferred TYLCV resistance. These results demonstrate that TYNBS1 is a functional resistance gene for TYLCV, and is synonymous with the Ty-2 gene.

     

Identification and mapping of <Emphasis Type="Italic">MLIW30</Emphasis>, a novel powdery mildew resistance gene derived from wild emmer wheat

Powdery mildew, caused by Blumeria graminis f.sp. tritici (Bgt), is a destructive foliar disease of common wheat in areas with cool or maritime climates. Wild emmer wheat, Triticum turgidum ssp. dicoccoides, the progenitor of both domesticated tetraploid durum wheat and hexaploid bread wheat, harbors abundant genetic diversity related to resistance to powdery mildew that can be utilized for wheat improvement. An F₂ segregating population was obtained from a cross between resistant bread wheat line 2L6 and susceptible cultivar Liaochun 10, after which genetic analysis of F₂ and F₂-derived F₃ families was performed by inoculating plants with isolate Bgt E09. The results of this experiment demonstrated that powdery mildew resistance in 2L6, which was derived from wild emmer wheat accession IW30, was controlled by a single dominant gene, temporarily designated MLIW30. Nineteen SSR markers and two STS markers linked with MLIW30 were acquired by applying bulked segregant analysis. Finally, MLIW30 was located to the long arm of chromosome 4A and found to be flanked by simple sequence repeat markers XB1g2000.2 and XB1g2020.2 at 0.1 cM. Because no powdery mildew resistance gene in or derived from wild emmer wheat has been reported in wheat chromosome 4A, MLIW30 might be a novel Pm gene.     

An intercalary translocation from <Emphasis Type="Italic">Agropyron</Emphasis><Emphasis Type="Italic">cristatum</Emphasis> 6P chromosome into common wheat confers enhanced kernel number per spike

Main conclusion

This study explored 6P chromosomal translocations in wheat, and determined the effects of 6P intercalary chromosome segments on kernel number per wheat spike. Exploiting and utilising gene(s) from wild relative species has become an essential strategy for wheat crop improvement. In the translocation line Pubing2978, the intercalary 6P chromosome segment from Agropyron cristatum (L.) Gaertn. (2n = 4x = 28, PPPP) carried valuable multi-kernel gene(s) and was selected from the offspring of the common wheat plant Fukuho and the irradiated wheat-A. cristatum 6P disomic substitution line 4844-8. Genomic in situ hybridisation (GISH), dual-colour fluorescence in situ hybridisation (FISH), and molecular markers were used to detect the small segmental 6P chromosome in the wheat background and its translocation breakpoint. Cytological studies demonstrated that Pubing2978 was a T1AS-6PL-1AS·1AL intercalary translocation with 42 chromosomes. The breakpoint was located near the centromeric region on the wheat chromosome 1AS and was flanked by the markers SSR12 and SSR283 based on an F₂ linkage map. The genotypic data, combined with the phenotypic information, implied that A. cristatum 6P chromosomal segment plays an important role in regulating the kernel number per spike (KPS). By comparison, the mean value of KPS in plants with translocations was approximately 10 higher than that in plants without translocations in three segregated populations. Moreover, the improvement in KPS was likely achieved by increasing both the spikelet number per spike (SNS) and the kernel number per spikelet. These excellent agronomic traits laid the foundation for further investigation of valuable genes and make the Pubing2978 line a promising germplasm for wheat breeding.

     

Characterization of an IAA-glucose hydrolase gene <Emphasis Type="Italic">TaTGW6</Emphasis> associated with grain weight in common wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

In rice, the TGW6 gene determines grain weight and encodes a protein with indole-3-acetic acid (IAA)-glucose hydrolase activity. Its homolog in wheat, TaTGW6, is considered as a candidate gene related to grain development. To amplify this gene, we designed primers based on a homologous conserved domain of the rice TGW6 gene. Sequence analysis indicated that TaTGW6 comprises only one exon, with 1656 bp in total and an open reading frame of 1035 bp. Three alleles at TaTGW6 locus detected by the primer pair TG23 were designated as TaTGW6-a, TaTGW6-b and TaTGW6-c, respectively. Compared with TaTGW6-a, TaTGW6-b had a 6-bp InDel at the position 170 downstream of initiation codon, and TaTGW6-c was a null mutant. Both TaTGW6-b and TaTGW6-c could significantly increase grain size and weight other than TaTGW6-a; however, the former two alleles showed a low frequency distribution in modern varieties. TaTGW6 was located on chromosome 4AL using a recombinant inbred line population and a set of Chinese Spring nullisomic-tetrasomic lines. It was linked to the SSR locus Xbarc1047 with a genetic distance of 6.62 cM and explained 15.8–21.0 % of phenotypic variation of grain weight in four environments. Association analysis using a natural population and Chinese wheat mini-core collections additionally validated the relationship of TaTGW6 with grain weight; the gene could explain 7.7–12.4 % of phenotypic variation in three environments. Quantitative real-time PCR revealed that TaTGW6-b showed relatively lower expression than TaTGW6-a in immature grain at 20 and 30 days post-anthesis and in mature grain. The low expression of TaTGW6 generally associated with low IAA content, but with high grain weight. The novel functional marker, designated as TG23, can be used for marker-assisted selection to improve grain weight in wheat and also provides insights into the regulatory mechanism underlying grain weight.     

Genome-wide association mapping of resistance to eyespot disease (<Emphasis Type="Italic">Pseudocercosporella herpotrichoides</Emphasis>) in European winter wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) and fine-mapping of <Emphasis Type="Italic">Pch1</Emphasis>

Key message

Genotypes with recombination events in the Triticum ventricosum introgression on chromosome 7D allowed to fine-map resistance gene Pch1, the main source of eyespot resistance in European winter wheat cultivars.

Abstract

Eyespot (also called Strawbreaker) is a common and serious fungal disease of winter wheat caused by the necrotrophic fungi Oculimacula yallundae and Oculimacula acuformis (former name Pseudocercosporella herpotrichoides). A genome-wide association study (GWAS) for eyespot was performed with 732 microsatellite markers (SSR) and 7761 mapped SNP markers derived from the 90 K iSELECT wheat array using a panel of 168 European winter wheat varieties as well as three spring wheat varieties and phenotypic evaluation of eyespot in field tests in three environments. Best linear unbiased estimations (BLUEs) were calculated across all trials and ranged from 1.20 (most resistant) to 5.73 (most susceptible) with an average value of 4.24 and a heritability of H ² = 0.91. A total of 108 SSR and 235 SNP marker–trait associations (MTAs) were identified by considering associations with a ?log₁₀ (P value) ≥3.0. Significant MTAs for eyespot-score BLUEs were found on chromosomes 1D, 2A, 2D, 3D, 5A, 5D, 6A, 7A and 7D for the SSR markers and chromosomes 1B, 2A, 2B, 2D, 3B and 7D for the SNP markers. For 18 varieties (10.5%), a highly resistant phenotype was detected that was linked to the presence of the resistance gene Pch1 on chromosome 7D. The identification of genotypes with recombination events in the introgressed genomic segment from Triticum ventricosum harboring the Pch1 resistance gene on chromosome 7DL allowed the fine-mapping of this gene using additional SNP markers and a potential candidate gene Traes_7DL_973A33763 coding for a CC-NBS-LRR class protein was identified.

     

Mapping gibberellin-sensitive dwarfing locus <Emphasis Type="Italic">Rht18</Emphasis> in durum wheat and development of SSR and SNP markers for selection in breeding

Gibberellin-sensitive dwarfing gene Rht18 was mapped in two durum wheat recombinant inbred lines (RIL) populations developed from crosses, Bijaga Yellow/Icaro and HI 8498/Icaro. Rht18 was mapped within genetic interval of 1.8 cM on chromosome 6A. Simple sequence repeat (SSR) markers S470865SSR4, barc37 and TdGA2ox-A9 specific marker showed co-segregation with Rht18 in Bijaga Yellow/Icaro population consisting 256 RILs. Effect of Rht18 on plant height was validated in HI 8498/Icaro RIL population which segregated for Rht18 and Rht-B1b. Rht-B1b from HI 8498 showed pleiotropic effect on plant height and coleoptile length, on the other hand, Rht18 did not show effect on coleoptile length. The SSR and SNP markers linked to Rht18 were also validated by assessing their allelic frequency in 89 diverse durum and bread wheat accessions. It was observed that 204 bp allele of S470865SSR4 could differentiate Icaro from rest of the wheat accessions except HI 8498, suggesting its utility for selection of Rht18 in wheat improvement programs. Rht18 associated alleles of TdGA2ox-A9, IAW4371 and IAW7940 were absent in most of the tall Indian local durum wheat and bread wheat, hence could be used to transfer Rht18 to bread wheat and local durum wheat. SSR marker barc3 showed high recombination frequency with Rht18, though it showed allele unique to Icaro. Since semidwarf wheat with GA-sensitive dwarfing genes are useful in dry environments owing to their longer coleoptile, better emergence and seedling vigor, Rht18 may provide a useful alternative to widely used GA-insensitive dwarfing genes under dry environments.     

A novel arrangement of zinc finger nuclease system for in vivo targeted genome engineering: the tomato <Emphasis Type="Italic">LEC1</Emphasis>-<Emphasis Type="Italic">LIKE4</Emphasis> gene case

Key message

A selection-free, highly efficient targeted mutagenesis approach based on a novel ZFN monomer arrangement for genome engineering in tomato reveals plant trait modifications.

Abstract

How to achieve precise gene targeting in plants and especially in crops remains a long-sought goal for elucidating gene function and advancing molecular breeding. To address this issue, zinc finger nuclease (ZFN)-based technology was developed for the Solanum lycopersicum seed system. A ZFN architecture design with an intronic sequence between the two DNA recognition sites was evaluated for its efficiency in targeted gene mutagenesis. Custom engineered ZFNs for the developmental regulator LEAFY-COTYLEDON1-LIKE4 (L1L4) coding for the β subunit of nuclear factor Y, when transiently expressed in tomato seeds, cleaved the target site and stimulated imperfect repair driven by nonhomologous end-joining, thus, introducing mutations into the endogenous target site. The successful in planta application of the ZFN platform resulted in L1L4 mutations which conferred heterochronic phenotypes during development. Our results revealed that sequence changes upstream of the DNA binding domain of L1L4 can lead to phenotypic diversity including fruit organ. These results underscore the utility of engineered ZFN approach in targeted mutagenesis of tomato plant which may accelerate translational research and tomato breeding.