Mutation of a single lytic transglycosylase causes aberrant septation and inhibits cell separation of Neisseria gonorrhoeae

The function of lytic peptidoglycan transglycosylases is poorly understood. Single lytic transglycosylase mutants of Escherichia coli have no growth phenotype. By contrast, mutation of Neisseria gonorrhoeae ltgC inhibited cell separation without affecting peptidoglycan monomer production. Thus, LtgC has a dedicated function in gonococcal cell division.     

Crystallographic studies of the interactions of Escherichia coli lytic transglycosylase Slt35 with peptidoglycan

Lytic transglycosylases catalyze the cleavage of the beta-1, 4-glycosidic bond between N-acetylmuramic acid (MurNAc) and N-acetylglucosamine (GlcNAc) in peptidoglycan with concomitant formation of a 1,6-anhydro bond in the MurNAc residue. To understand the reaction mechanism of Escherichia coli lytic transglycosylase Slt35, three crystal structures have been determined of Slt35 in complex with two different peptidoglycan fragments and with the lytic transglycosylase inhibitor bulgecin A. The complexes define four sugar-binding subsites (-2, -1, +1, and +2) and two peptide-binding sites in a large cleft close to Glu162. The Glu162 side chain is between the -1 and +1 sugar-binding sites, in agreement with a function as catalytic acid/base. The complexes suggest additional contributions to catalysis from Ser216 and Asn339, residues which are conserved among the MltB/Slt35 lytic transglycosylases.     

Assay for lytic transglycosylases: a family of peptidoglycan lyases

An assay has been developed to monitor the activity of the lytic transglycosylases which does not involve the use of radiolabel. Samples of lytic transglycosylase were incubated with isolated and purified insoluble peptidoglycan as substrate for varying lengths of time. Residual insoluble material was removed by ultracentrifugation in a microfuge and the solubilized components were treated with sodium borohydride prior to acid hydrolysis. The optimal conditions for this acid hydrolysis were established to be incubation at 96 degrees C for 1 h in 6 M HCl, in vacuo. The hydrolyzed samples were subjected to amino acid/sugar analysis by cation-exchange chromatography on a Beckman System Gold amino acid analyzer. To effect a clear resolution of muramic acid from serine and glutamic acid, the equilibration buffer was modified to be composed of 33 mM sodium citrate, pH 3.12. The product of the lyase reaction of the lytic transglycosylases are 1,6-anhydromuramyl residues, which are not reduced by the sodium borohydride treatment. On the other hand, the muramyl residues arising at the reducing ends of peptidoglycan after treatment with muramidases (hydrolyases) are reduced to muramitol residues, which elute from the amino acid analyzer prior to aspartic acid. This assay thus distinguishes the activity of the two enzymes and was applied to determine the initial activities of increasing concentrations of a soluble derivative of lytic transglycosylase B from the opportunistic pathogen Pseudomonas aeruginosa.     

Neisseria gonorrhoeae uses two lytic transglycosylases to produce cytotoxic peptidoglycan monomers

Peptidoglycan fragments released by Neisseria gonorrhoeae contribute to the inflammation and ciliated cell death associated with gonorrhea and pelvic inflammatory disease. However, little is known about the production and release of these fragments during bacterial growth. Previous studies demonstrated that one lytic transglycosylase, LtgA, was responsible for the production of approximately half of the released peptidoglycan monomers. Systematic mutational analysis of other putative lytic transglycosylase genes identified lytic transglycosylase D (LtgD) as responsible for release of peptidoglycan monomers from gonococci. An ltgA ltgD double mutant was found not to release peptidoglycan monomers and instead released large, soluble peptidoglycan fragments. In pulse-chase experiments, recycled peptidoglycan was not found in cytoplasmic extracts from the ltgA ltgD mutant as it was for the wild-type strain, indicating that generation of anhydro peptidoglycan monomers by lytic transglycosylases facilitates peptidoglycan recycling. The ltgA ltgD double mutant showed no growth abnormalities or cell separation defects, suggesting that these enzymes are involved in pathogenesis but not necessary for normal growth.     

Structural Analysis of a Specialized Type III Secretion System Peptidoglycan-cleaving Enzyme

The Gram-negative bacterium enteropathogenic Escherichia coli uses a syringe-like type III secretion system (T3SS) to inject virulence or “effector” proteins into the cytoplasm of host intestinal epithelial cells. To assemble, the T3SS must traverse both bacterial membranes, as well as the peptidoglycan layer. Peptidoglycan is made of repeating N-acetylmuramic acid and N-acetylglucosamine disaccharides cross-linked by pentapeptides to form a tight mesh barrier. Assembly of many macromolecular machines requires a dedicated peptidoglycan lytic enzyme (PG-lytic enzyme) to locally clear peptidoglycan. Here we have solved the first structure of a T3SS-associated PG-lytic enzyme, EtgA from enteropathogenic E. coli. Unexpectedly, the active site of EtgA has features in common with both lytic transglycosylases and hen egg white lysozyme. Most notably, the β-hairpin region resembles that of lysozyme and contains an aspartate that aligns with lysozyme Asp-52 (a residue critical for catalysis), a conservation not observed in other previously characterized lytic transglycosylase families to which the conserved T3SS enzymes had been presumed to belong. Mutation of the EtgA catalytic glutamate, Glu-42, conserved across lytic transglycosylases and hen egg white lysozyme, and this differentiating aspartate diminishes type III secretion in vivo, supporting its essential role in clearing the peptidoglycan for T3SS assembly. Finally, we show that EtgA forms a 1:1 complex with the building block of the polymerized T3SS inner rod component, EscI, and that this interaction enhances PG-lytic activity of EtgA in vitro, collectively providing the necessary strict localization and regulation of the lytic activity to prevent overall cell lysis.     

AtlA functions as a peptidoglycan lytic transglycosylase in the Neisseria gonorrhoeae type IV secretion system

Type IV secretion systems require peptidoglycan lytic transglycosylases for efficient secretion, but the function of these enzymes is not clear. The type IV secretion system gene cluster of Neisseria gonorrhoeae encodes two peptidoglycan transglycosylase homologues. One, LtgX, is similar to peptidoglycan transglycosylases from other type IV secretion systems. The other, AtlA, is similar to endolysins from bacteriophages and is not similar to any described type IV secretion component. We characterized the enzymatic function of AtlA in order to examine its role in the type IV secretion system. Purified AtlA was found to degrade macromolecular peptidoglycan and to produce 1,6-anhydro peptidoglycan monomers, characteristic of lytic transglycosylase activity. We found that AtlA can functionally replace the lambda endolysin to lyse Escherichia coli. In contrast, a sensitive measure of lysis demonstrated that AtlA does not lyse gonococci expressing it or gonococci cocultured with an AtlA-expressing strain. The gonococcal type IV secretion system secretes DNA during growth. A deletion of ltgX or a substitution in the putative active site of AtlA severely decreased DNA secretion. These results indicate that AtlA and LtgX are actively involved in type IV secretion and that AtlA is not involved in lysis of gonococci to release DNA. This is the first demonstration that a type IV secretion peptidoglycanase has lytic transglycosylase activity. These data show that AtlA plays a role in type IV secretion of DNA that requires peptidoglycan breakdown without cell lysis.     

The C-terminal domain of Escherichia coli YfhD functions as a lytic transglycosylase

The hypothetical Escherichia coli protein YfhD has been identified as the archetype for the family 1B lytic transglycosylases despite a complete lack of experimental characterization. The yfhD gene was amplified from the genomic DNA of E. coli W3110 and cloned to encode a fusion protein with a C-terminal His(6) sequence. The enzyme was found to be localized to the outer membrane of E. coli, as would be expected for a lytic transglycosylase. Its gene was engineered for the production of a truncated soluble enzyme derivative lacking an N-terminal signal sequence and membrane anchor. The soluble YfhD derivative was purified to apparent homogeneity, and three separate in vitro assays involving high pressure liquid chromatography and matrix-assisted laser desorption ionization time-of-flight mass spectrometry were used to demonstrate the YfhD-catalyzed release of 1,6-anhydromuro-peptides from insoluble peptidoglycan. In addition, an in vivo bioassay developed using the bacteriophage lambda lysis system confirmed that the enzyme functions as an autolysin. Based on these data, the enzyme was renamed membrane-bound lytic transglycosylase F. The modular structure of MltF was investigated through genetic engineering for the separate production of identified N-terminal and C-terminal domains. The ability to bind peptidoglycan and lytic activity were only associated with the isolated C-terminal domain. The enzymatic properties of this lytic transglycosylase domain were found to be very similar to those of the wild-type enzyme. The one notable exception was that the N-terminal domain appears to modulate the lytic behavior of the C-terminal domain to permit continued lysis of insoluble peptidoglycan, a unique feature of MltF compared with other characterized lytic transglycosylases.     

Sodium‐powered stators of the bacterial flagellar motor can generate torque in the presence of phenamil with mutations near the peptidoglycan‐binding region

The bacterial flagellar motor powers the rotation that propels the swimming bacteria. Rotational torque is generated by harnessing the flow of ions through ion channels known as stators which couple the energy from the ion gradient across the inner membrane to rotation of the rotor. Here, we used error‐prone PCR to introduce single point mutations into the sodium‐powered Vibrio alginolyticus/Escherichia coli chimeric stator PotB and selected for motors that exhibited motility in the presence of the sodium‐channel inhibitor phenamil. We found single mutations that enable motility under phenamil occurred at two sites: (i) the transmembrane domain of PotB, corresponding to the TM region of the PomB stator from V. alginolyticus and (ii) near the peptidoglycan binding region that corresponds to the C‐terminal region of the MotB stator from E. coli. Single cell rotation assays confirmed that individual flagellar motors could rotate in up to 100 µM phenamil. Using phylogenetic logistic regression, we found correlation between natural residue variation and ion source at positions corresponding to PotB F22Y, but not at other sites. Our results demonstrate that it is not only the pore region of the stator that moderates motility in the presence of ion‐channel blockers.     

The flagellar muramidase from the photosynthetic bacterium Rhodobacter sphaeroides

We have characterized open reading frame RSP0072, which is located within the flgG operon in Rhodobacter sphaeroides. The amino acid sequence analysis of this gene product showed the presence of a soluble lytic transglycosylase domain. The deletion of the N-terminal region (90 amino acids) of the product of RSP0072 yields a leaky nonmotile phenotype, as determined by swarm assays in soft agar. Electron micrographs revealed the lack of flagella in mutant cells. The purified wild-type protein showed lytic activity on extracts of Micrococcus luteus. In contrast, no lytic activity was observed when the residues E57 or E83 were replaced by alanine. Affinity blotting suggests that the protein encoded by RSP0072 interacts with the flagellar rod-scaffolding protein FlgJ, which lacks the muramidase domain present in FlgJ of many bacteria. We propose that the product of RSP0072 is a flagellar muramidase that is exported to the periplasm via the Sec pathway, where it interacts with FlgJ to open a gap in the peptidoglycan layer for the subsequent penetration of the nascent flagellar structure.     

Stator assembly and activation mechanism of the flagellar motor by the periplasmic region of MotB

Torque generation in the Salmonella flagellar motor is coupled to translocation of H⁺ ions through the proton-conducting channel of the Mot protein stator complex. The Mot complex is believed to be anchored to the peptidoglycan (PG) layer by the putative peptidoglycan-binding (PGB) domain of MotB. Proton translocation is activated only when the stator is installed into the motor. We report the crystal structure of a C-terminal periplasmic fragment of MotB (MotB_C) that contains the PGB domain and includes the entire periplasmic region essential for motility. Structural and functional analyses indicate that the PGB domains must dimerize in order to form the proton-conducting channel. Drastic conformational changes in the N-terminal portion of MotB_C are required both for PG binding and the proton channel activation.     

Two flagellar stators and their roles in motility and virulence in <Emphasis Type="Italic">Pseudomonas syringae</Emphasis> pv. <Emphasis Type="Italic">tabaci</Emphasis> 6605

The motor proteins around the flagellar basal body consist of two cytoplasmic membrane proteins, MotA and MotB, and function as a complex that acts as the stator to generate the torque that drives rotation. Genome analysis of several Pseudomonas syringae pathovars revealed that there are two sets of genes encoding motor proteins: motAB and motCD. Deduced amino acid sequences for MotA/B and MotC/D showed homologies to the H⁺-driven stator from Escherichia coli and Na⁺-driven stator from Vibrio alginolyticus, respectively. However, the swimming motility of P. syringae pv. tabaci (Pta) 6605 was inhibited by the protonophore carbonyl cyanide m-chlorophenylhydrazone but not by the sodium stator-specific inhibitor phenamil. To identify a gene encoding the stator protein required for motility, ∆motAB, ∆motCD, and ∆motABCD mutants were generated. The ∆motCD mutant had remarkably reduced and the ∆motABCD mutant completely abolished swimming motilities, whereas the ∆motAB mutant retained some degree of these abilities. The ∆motCD and ∆motABCD mutants did not produce N-acyl-homoserine lactones (AHLs), quorum-sensing molecules in this pathogen, and remarkably reduced the ability to cause disease in host tobacco leaves, as we previously observed in the ∆fliC mutant strain. These results strongly indicate that both stator pairs in Pta 6605 are proton-dependent and that MotCD is important for not only flagellar motility but also for production of AHLs and the ability to cause disease in host plants.     

Identification of a new family of enzymes with potential <Emphasis Type="Italic">O</Emphasis>-acetylpeptidoglycan esterase activity in both Gram-positive and Gram-negative bacteria

Background  

The metabolism of the rigid bacterial cell wall heteropolymer peptidoglycan is a dynamic process requiring continuous biosynthesis and maintenance involving the coordination of both lytic and synthetic enzymes. The O-acetylation of peptidoglycan has been proposed to provide one level of control on these activities as this modification inhibits the action of the major endogenous lytic enzymes, the lytic transglycosylases. The O-acetylation of peptidoglycan also inhibits the activity of the lysozymes which serve as the first line of defense of host cells against the invasion of bacterial pathogens. Despite this central importance, there is a dearth of information regarding peptidoglycan O-acetylation and nothing has previously been reported on its de-acetylation.     

Inhibition of membrane-bound lytic transglycosylase B by NAG-thiazoline

The lytic transglycosylases cleave the bacterial cell wall heteropolymer peptidoglycan with the same specificity as the muramidases (lysozymes), between the N-acetylmuramic acid and N-acetylglucosamine residues, with the concomitant formation of a 1,6-anhydromuramoyl residue. The putative catalytic residue in the family 3 lytic transglycosylase from Pseudomonas aeruginosa, Glu162 as identified by sequence alignment to the homologous enzyme from Escherichia coli, was replaced with both Ala and Asp by site-directed mutagenesis. Neither mutant enzyme differed structurally from the wild-type enzyme, as judged by CD spectroscopy, but both were enzymatically inactive confirming the essential role of Glu162 in the mechanism of action of this lytic transglycosylase. The beta-hexosaminidase inhibitor NAG-thiazoline was shown to inhibit the activity of lytic transglycosylase activity, thus providing the first direct evidence that the formation of the 1,6-anhydromuramoyl residue may proceed through an oxazolinium ion intermediate involving anchimeric assistance. Using surface plasmon resonance and difference absorbance spectroscopy, Kd values of 1.8 and 1.4 mM, respectively, were determined for NAG thiazoline, while its parent compound N-acetylglucosamine neither inhibited nor appeared to bind the lytic transglycosylase with any significant affinity.     

Domestication of a housekeeping transglycosylase for assembly of a Type VI secretion system

The type VI secretion system (T6SS) is an anti‐bacterial weapon comprising a contractile tail anchored to the cell envelope by a membrane complex. The TssJ, TssL, and TssM proteins assemble a 1.7‐MDa channel complex that spans the cell envelope, including the peptidoglycan layer. The electron microscopy structure of the TssJLM complex revealed that it has a diameter of ~18 nm in the periplasm, which is larger than the size of peptidoglycan pores (~2 nm), hence questioning how the T6SS membrane complex crosses the peptidoglycan layer. Here, we report that the MltE housekeeping lytic transglycosylase (LTG) is required for T6SS assembly in enteroaggregative Escherichia coli. Protein–protein interaction studies further demonstrated that MltE is recruited to the periplasmic domain of TssM. In addition, we show that TssM significantly stimulates MltE activity in vitro and that MltE is required for the late stages of T6SS membrane complex assembly. Collectively, our data provide the first example of domestication and activation of a LTG encoded within the core genome for the assembly of a secretion system.     

Visualizing the production and arrangement of peptidoglycan in Gram‐positive cells

Decades of study have revealed the fine chemical structure of the bacterial peptidoglycan cell wall, but the arrangement of the peptidoglycan strands within the wall has been challenging to define. The application of electron cryotomography (ECT) and new methods for fluorescent labelling of peptidoglycan are allowing new insights into wall structure and synthesis. Two articles in this issue examine peptidoglycan structures in the model Gram‐positive species Bacillus subtilis. Beeby et al. combined visualization of peptidoglycan using ECT with molecular modelling of three proposed arrangements of peptidoglycan strands to identify the model most consistent with their data. They argue convincingly for a Gram‐positive wall containing multiple layers of peptidoglycan strands arranged circumferentially around the long axis of the rod‐shaped cell, an arrangement similar to the single layer of peptidoglycan in similarly shaped Gram‐negative cells. Tocheva et al. examined sporulating cells using ECT and fluorescence microscopy to demonstrate the continuous production of a thin layer of peptidoglycan around the developing spore as it is engulfed by the membrane of the adjacent mother cell. The presence of this peptidoglycan in the intermembrane space allows the refinement of a model for engulfment, which has been known to include peptidoglycan synthetic and lytic functions.     

In situ structure of the Caulobacter crescentus flagellar motor and visualization of binding of a CheY-homolog

Bacterial flagellar motility is controlled by the binding of CheY proteins to the cytoplasmic switch complex of the flagellar motor, resulting in changes in swimming speed or direction. Despite its importance for motor function, structural information about the interaction between effector proteins and the motor are scarce. To address this gap in knowledge, we used electron cryotomography and subtomogram averaging to visualize such interactions inside Caulobacter crescentus cells. In C. crescentus, several CheY homologs regulate motor function for different aspects of the bacterial lifestyle. We used subtomogram averaging to image binding of the CheY family protein CleD to the cytoplasmic Cring switch complex, the control center of the flagellar motor. This unambiguously confirmed the orientation of the motor switch protein FliM and the binding of a member of the CheY protein family to the outside rim of the C ring. We also uncovered previously unknown structural elaborations of the alphaproteobacterial flagellar motor, including two novel periplasmic ring structures, and the stator ring harboring eleven stator units, adding to our growing catalog of bacterial flagellar diversity.     

Crystallographic and molecular dynamics analysis of loop motions unmasking the peptidoglycan-binding site in stator protein MotB of flagellar motor

Background

The C-terminal domain of MotB (MotB-C) shows high sequence similarity to outer membrane protein A and related peptidoglycan (PG)-binding proteins. It is believed to anchor the power-generating MotA/MotB stator unit of the bacterial flagellar motor to the peptidoglycan layer of the cell wall. We previously reported the first crystal structure of this domain and made a puzzling observation that all conserved residues that are thought to be essential for PG recognition are buried and inaccessible in the crystal structure. In this study, we tested a hypothesis that peptidoglycan binding is preceded by, or accompanied by, some structural reorganization that exposes the key conserved residues.

Methodology/Principal Findings

We determined the structure of a new crystalline form (Form B) of Helicobacter pylori MotB-C. Comparisons with the existing Form A revealed conformational variations in the petal-like loops around the carbohydrate binding site near one end of the β-sheet. These variations are thought to reflect natural flexibility at this site required for insertion into the peptidoglycan mesh. In order to understand the nature of this flexibility we have performed molecular dynamics simulations of the MotB-C dimer. The results are consistent with the crystallographic data and provide evidence that the three loops move in a concerted fashion, exposing conserved MotB residues that have previously been implicated in binding of the peptide moiety of peptidoglycan.

Conclusion/Significance

Our structural analysis provides a new insight into the mechanism by which MotB inserts into the peptidoglycan mesh, thus anchoring the power-generating complex to the cell wall.     

Solution structure analysis of the periplasmic region of bacterial flagellar motor stators by small angle X-ray scattering

The bacterial flagellar motor drives the rotation of helical flagellar filaments to propel bacteria through viscous media. It consists of a dynamic population of mechanosensitive stators that are embedded in the inner membrane and activate in response to external load. This entails assembly around the rotor, anchoring to the peptidoglycan layer to counteract torque from the rotor and opening of a cation channel to facilitate an influx of cations, which is converted into mechanical rotation. Stator complexes are comprised of four copies of an integral membrane A subunit and two copies of a B subunit. Each B subunit includes a C-terminal OmpA-like peptidoglycan-binding (PGB) domain. This is thought to be linked to a single N-terminal transmembrane helix by a long unstructured peptide, which allows the PGB domain to bind to the peptidoglycan layer during stator anchoring. The high-resolution crystal structures of flagellar motor PGB domains from Salmonella enterica (MotB_C2) and Vibrio alginolyticus (PomB_C5) have previously been elucidated. Here, we use small-angle X-ray scattering (SAXS). We show that unlike MotB_C2, the dimeric conformation of the PomB_C5 in solution differs to its crystal structure, and explore the functional relevance by characterising gain-of-function mutants as well as wild-type constructs of various lengths. These provide new insight into the conformational diversity of flagellar motor PGB domains and experimental verification of their overall topology.     

Identification of dynamic structural motifs involved in peptidoglycan glycosyltransfer

We have determined the structure of a new form of the bifunctional peptidoglycan glycosyltransferase (GT)/transpeptidase penicillin-binding protein 2 from the pathogen Staphylococcus aureus. We observe several previously unstructured regions of the GT substrate-binding pockets, including a π-bulge in the outer helix that may be responsible for the conformational flexibility of active-site motifs required for transfer of product to the donor binding site during processive rounds of peptidoglycan polymerization. The identification of a β-hairpin in the usually unstructured region of the fold shares local structural homology to that of an exomuramidase, heightening comparisons between this biosynthetic enzyme and lytic peptidoglycan transglycosylases. This new form also shows remarkable interdomain flexibility, causing the linker region of the fold to project into the GT active site. This self-interaction may have significant consequences for the regulation of polymerization activity. The derived information is used to build a catalytic model of both donor and acceptor glycolipid substrates.     

Helicobacter pylori CheZHP and ChePep form a novel chemotaxis‐regulatory complex distinct from the core chemotaxis signaling proteins and the flagellar motor

Chemotaxis is important for Helicobacter pylori to colonize the stomach. Like other bacteria, H. pylori uses chemoreceptors and conserved chemotaxis proteins to phosphorylate the flagellar rotational response regulator, CheY, and modulate the flagellar rotational direction. Phosphorylated CheY is returned to its non‐phosphorylated state by phosphatases such as CheZ. In previously studied cases, chemotaxis phosphatases localize to the cellular poles by interactions with either the CheA chemotaxis kinase or flagellar motor proteins. We report here that the H. pylori CheZ, CheZ_HP, localizes to the poles independently of the flagellar motor, CheA, and all typical chemotaxis proteins. Instead, CheZ_HP localization depends on the chemotaxis regulatory protein ChePep, and reciprocally, ChePep requires CheZ_HP for its polar localization. We furthermore show that these proteins interact directly. Functional domain mapping of CheZ_HP determined the polar localization motif lies within the central domain of the protein and that the protein has regions outside of the active site that participate in chemotaxis. Our results suggest that CheZ_HP and ChePep form a distinct complex. These results therefore suggest the intriguing idea that some phosphatases localize independently of the other chemotaxis and motility proteins, possibly to confer unique regulation on these proteins' activities.