木质素生物合成及其基因工程研究进展

木质素是维管植物的一种主要组成成分,是植物适应陆地环境的重要特征之一.然而,它的存在严重影响植物材料在造纸工业与畜牧业生产中的应用,因此其生物合成调控的研究引起人们极大关注.随着各种分析技术和手段的提高,该领域研究取得了突破性的进展.该文重点阐述这些新进展,同时较系统地介绍利用基因工程技术调控木质素生物合成的研究成果,并提出一些关于更有效地利用生物技术手段改良造纸资源植物品质的建议.     

Abiotic and Biotic Stresses and Changes in the Lignin Content and Composition in Plants

Lignin is a polymer of phenylpropanoid compounds formed through a complex biosynthesis route, represented by a metabolic grid for which most of the genes involved have been sequenced in several plants, mainly in the model-plants Arabidopsis thaliana and Populus. Plants are exposed to different stresses, which may change lignin content and composition. In many cases, particularly for plant-microbe interactions, this has been suggested as defence responses of plants to the stress. Thus, understanding how a stressor modulates expression of the genes related with lignin biosynthesis may allow us to develop study-models to increase our knowledge on the metabolic control of lignin deposition in the cell wall. This review focuses on recent literature reporting on the main types of abiotic and biotic stresses that alter the biosynthesis of lignin in plants.     

ZmMYB31 directly represses maize lignin genes and redirects the phenylpropanoid metabolic flux

Few regulators of phenylpropanoids have been identified in monocots having potential as biofuel crops. Here we demonstrate the role of the maize (Zea mays) R2R3-MYB factor ZmMYB31 in the control of the phenylpropanoid pathway. We determined its in vitro consensus DNA-binding sequence as ACC(T)/(A) ACC, and chromatin immunoprecipitation (ChIP) established that it interacts with two lignin gene promoters in vivo. To explore the potential of ZmMYB31 as a regulator of phenylpropanoids in other plants, its role in the regulation of the phenylpropanoid pathway was further investigated in Arabidopsis thaliana. ZmMYB31 downregulates several genes involved in the synthesis of monolignols and transgenic plants are dwarf and show a significantly reduced lignin content with unaltered polymer composition. We demonstrate that these changes increase cell wall degradability of the transgenic plants. In addition, ZmMYB31 represses the synthesis of sinapoylmalate, resulting in plants that are more sensitive to UV irradiation, and induces several stress-related proteins. Our results suggest that, as an indirect effect of repression of lignin biosynthesis, transgenic plants redirect carbon flux towards the biosynthesis of anthocyanins. Thus, ZmMYB31 can be considered a good candidate for the manipulation of lignin biosynthesis in biotechnological applications.     

Lignin: Genetic Engineering and Impact on Pulping

Lignin is a major component of wood, the most widely used raw material for the production of pulp and paper. Although the biochemistry and molecular biology underpinning lignin production are better understood than they are for the other wood components, recent work has prompted a number of re-evaluations of the lignin biosynthetic pathway. Some of the work on which these revisions have been based involved the investigation of transgenic plants with modified lignin biosynthesis. In addition to their value in elucidating the lignin biosynthetic pathway, such transgenic plants are also being produced with the aim of improving plant raw materials for pulp and paper production. This review describes how genetic engineering has yielded new insights into how the lignin biosynthetic pathway operates and demonstrates that lignin can be improved to facilitate pulping. The current technologies used to produce paper are presented in this review, followed by a discussion of the impact of lignin modification on pulp production. Fine-tuned modification of lignin content, composition, or both is now achievable and could have important economic and environmental benefits.     

Downregulation of caffeoyl-CoA O-methyltransferase (CCoAOMT) by RNA interference leads to reduced lignin production in maize straw

Lignin is a major cell wall component of vascular plants that provides mechanical strength and hydrophobicity to vascular vessels. However, the presence of lignin limits the effective use of crop straw in many agroindustrial processes. Here, we generated transgenic maize plants in which the expression of a lignin biosynthetic gene encoding CCoAOMT, a key enzyme involved in the lignin biosynthesis pathway was downregulated by RNA interference (RNAi). RNAi of CCoAOMT led to significantly downregulated expression of this gene in transgenic maize compared with WT plants. These transgenic plants exhibited a 22.4% decrease in Klason lignin content and a 23.3% increase in cellulose content compared with WT plants, which may reflect compensatory regulation of lignin and cellulose deposition. We also measured the lignin monomer composition of the RNAi plants by GC-MS and determined that transgenic plants had a 57.08% higher S/G ratio than WT plants. In addition, histological staining of lignin with Wiesner reagent produced slightly more coloration in the xylem and sclerenchyma than WT plants. These results provide a foundation for breeding maize with low-lignin content and reveal novel insights about lignin regulation via genetic manipulation of CCoAOMT expression.     

Enabling technologies for manipulating multiple genes on complex pathways

Many complex biochemical pathways in plants have now been manipulated genetically, usually by suppression or over-expression of single genes. Further exploitation of the potential for plant genetic manipulation, both as a research tool and as a vehicle for plant biotechnology, will require the co-ordinate manipulation of multiple genes on a pathway. This goal is currently very difficult to achieve. A number of approaches have been taken to combine or `pyramid' transgenes in one plant and have met with varying degrees of success. These approaches include sexual crossing, re-transformation, co-transformation and the use of linked transgenes. Novel, alternative `enabling' technologies are also being developed that aim to use single transgenes to manipulate the expression of multiple genes. A chimeric transgene with linked partial gene sequences placed under the control of a single promoter can be used to co-ordinately suppress numerous plant endogenous genes. Constructs modelled on viral polyproteins can be used to simultaneously introduce multiple protein-coding genes into plant cells. In the course of our work on the lignin biosynthetic pathway, we have tested both conventional and novel methods for achieving co-ordinate suppression or over-expression of up to three plant lignin genes. In this article we review the literature concerning the manipulation of multiple genes in plants. We also report on our own experiences and results using different methods to perform directed manipulation of lignin biosynthesis in tobacco.     

Lignin: genetic engineering and impact on pulping

Lignin is a major component of wood, the most widely used raw material for the production of pulp and paper. Although the biochemistry and molecular biology underpinning lignin production are better understood than they are for the other wood components, recent work has prompted a number of re-evaluations of the lignin biosynthetic pathway. Some of the work on which these revisions have been based involved the investigation of transgenic plants with modified lignin biosynthesis. In addition to their value in elucidating the lignin biosynthetic pathway, such transgenic plants are also being produced with the aim of improving plant raw materials for pulp and paper production. This review describes how genetic engineering has yielded new insights into how the lignin biosynthetic pathway operates and demonstrates that lignin can be improved to facilitate pulping. The current technologies used to produce paper are presented in this review, followed by a discussion of the impact of lignin modification on pulp production. Fine-tuned modification of lignin content, composition, or both is now achievable and could have important economic and environmental benefits.     

Erwinia carotovora ssp.carotovora Infection Induced“Defense Lignin”Accumulation and Lignin Biosynthetic Gene Expression in Chinese Cabbage(Brassica rapa L.ssp.pekinensis)

Erwinia carotovora subsp. carotovora (Ecc) infects and causes soft rot disease in hundreds of crop species includingvegetables, flowers and fruits. Lignin biosynthesis has been implicated in defensive reactions to injury and pathogeninfection in plants. In this work, variations of lignin content and gene expression in the molecular interaction betweenChinese cabbage and Ecc were investigated. H_2O_2 accumulation and peroxidase activity were detected by 3, 3-Dimethoxybenzidine staining at mocked and Ecc-inoculated sites of Chinese cabbage leafstalks. Mason lignin contentin inoculated plants increased by about 7.84%, 40.37%, and 43.13% more than that of the mocked site at 12, 24 and 72 hafter inoculation, respectively. Gas chromatography detected more p-coumaryl (H) and less coniferyl (G) and sinapyl (S)monolignins in leafstalks of Chinese cabbage. All three monomers increased in Ecc-infected leafstalks, and the Ecc-induced"defense lignin" were composed of more G and H monolignins, and less S monolignin. After searching the expressedsequence tags (EST) data of Chinese cabbage, 12 genes putatively encoding enzymes involved in lignin biosynthesis wereselected to study their expression. All of these genes could be induced by mock inoculation and Ecc infection, while thegene expression lasted for several more hours in the infected samples than in mocked and untreated plants. Our resultsindicated that "defense lignin" was different from the developmental lignin in composition; G and S monolignins weresignificantly induced in plants in response to the soft rot Ecc; thus, lignin biosynthesis was differentially regulated andplayed a role in plant response to the soft rot Ecc.     

Syringyl lignin is unaltered by severe sinapyl alcohol dehydrogenase suppression in tobacco

The manipulation of lignin could, in principle, facilitate efficient biofuel production from plant biomass. Despite intensive study of the lignin pathway, uncertainty exists about the enzyme catalyzing the last step in syringyl (S) monolignol biosynthesis, the reduction of sinapaldehyde to sinapyl alcohol. Traditional schemes of the pathway suggested that both guaiacyl (G) and S monolignols are produced by a single substrate-versatile enzyme, cinnamyl alcohol dehydrogenase (CAD). This was challenged by the discovery of a novel sinapyl alcohol dehydrogenase (SAD) that preferentially uses sinapaldehyde as a substrate and that was claimed to regulate S lignin biosynthesis in angiosperms. Consequently, most pathway schemes now show SAD (or SAD and CAD) at the sinapaldehyde reduction step, although functional evidence is lacking. We cloned SAD from tobacco (Nicotiana tabacum) and suppressed it in transgenic plants using RNA interference-inducing vectors. Characterization of lignin in the woody stems shows no change to content, composition, or structure, and S lignin is normal. By contrast, plants additionally suppressed in CAD have changes to lignin structure and S:G ratio and have increased sinapaldehyde in lignin, similar to plants suppressed in CAD alone. These data demonstrate that CAD, not SAD, is the enzyme responsible for S lignin biosynthesis in woody angiosperm xylem.     

Dual methylation pathways in lignin biosynthesis

Caffeoyl-coenzyme A (CoA) O-methyltransferase (CCoAOMT) has been proposed to be involved in an alternative methylation pathway of lignin biosynthesis. However, no direct evidence has been available to confirm that CCoAOMT is essential for lignin biosynthesis. To understand further the methylation steps in lignin biosynthesis, we used an antisense approach to alter O-methyltransferase (OMT) gene expression and investigated the consequences of this alteration. We generated transgenic tobacco plants with a substantial reduction in CCoAOMT as well as plants with a simultaneous reduction in both CCoAOMT and caffeic acid O-methyltransferase (CAOMT). Lignin analysis showed that the reduction in CCoAOMT alone resulted in a dramatic decrease in lignin content. The reduction in CCoAOMT also led to a dramatic alteration in lignin composition. Both guaiacyl lignin and syringyl lignin were reduced in the transgenic plants. However, guaiacyl lignin was preferentially reduced, which resulted in an increase in the S/G (syringl/guaiacyl) ratio. We have also analyzed lignin content and composition in transgenic plants having a simultaneous reduction in both CCoAOMT and CAOMT. The reduction in both OMTs resulted in a further decrease in total lignin content. This is in sharp contrast to the effect that resulted from the reduction in CAOMT alone, which only decreased the syringl lignin unit without a reduction in overall lignin content. These results unequivocally demonstrate that methylation reactions in lignin biosynthesis are catalyzed by both CCoAOMT and CAOMT.     

Tailoring lignin biosynthesis for efficient and sustainable biofuel production

Increased global interest in a bio‐based economy has reinvigorated the research on the cell wall structure and composition in plants. In particular, the study of plant lignification has become a central focus, with respect to its intractability and negative impact on the utilization of the cell wall biomass for producing biofuels and bio‐based chemicals. Striking progress has been achieved in the last few years both on our fundamental understanding of lignin biosynthesis, deposition and assembly, and on the interplay of lignin synthesis with the plant growth and development. With the knowledge gleaned from basic studies, researchers are now able to invent and develop elegant biotechnological strategies to sophisticatedly manipulate the quantity and structure of lignin and thus to create economically viable bioenergy feedstocks. These concerted efforts open an avenue for the commercial production of cost‐competitive biofuel to meet our energy needs.     

Mutations of the secondary cell wall

It has not been possible to isolate a number of crucial enzymes involved in plant cell wall synthesis. Recent progress in identifying some of these steps has been overcome by the isolation of mutants defective in various aspects of cell wall synthesis and the use of these mutants to identify the corresponding genes. Secondary cell walls offer numerous advantages for genetic analysis of plant cell walls. It is possible to recover very severe mutants since the plants remain viable. In addition, although variation in secondary cell wall composition occurs between different species and between different cell types, the composition of the walls is relatively simple compared to primary cell walls. Despite these advantages, relatively few secondary cell wall mutations have been described to date. The only secondary cell wall mutations characterised to date, in which the basis of the abnormality is known, have defects in either the control of secondary cell wall deposition or secondary cell wall cellulose or lignin biosynthesis. These mutants have, however, provided essential information on secondary cell wall biosynthesis.     

Lignin Biosynthesis Studies in Plant Tissue Cultures

Lignin, a phenolic polymer abundant in cell walls of certain cell types, has given challenges to scientists studying its structure or biosynthesis. In plants lignified tissues are distributed between other, non-lignified tissues. Characterization of native lignin in the cell wall has been difficult due to the highly cross-linked nature of the wall components. Model systems, like plant tissue cultures with tracheary element differentiation or extracellular lignin formation, have provided useful information related to lignin structure and several aspects of lignin formation. For example, many enzyme activities in the phenylpropanoid pathway have been first identified in tissue cultures. This review focuses on studies where the use of plant tissue cultures has been advantageous in structural and biosynthesis studies of lignin, and discusses the validity of tissue cultures as models for lignin biosynthesis.