An evaluation of elution techniques in the study of immune complex glomerulonephritis.

Antigen and antibody from glomerular immune complex deposits in rabbits with experimental bovine serum albumin-(BSA) induced chronic serum sickness (CSS) were quantitated in elutes from kidneys in which a portion of the antigen and antibody had been radiolabeled. The largest quantities of 125I BSA eluted with 1 M roprionic acid at pH 2.7 (86%) and 0.1 M borate buffer at pH 11.25 (80%). However, these buffers yielded less functional anti-BSA antibody than 0.02 M citrate buffer at pH 3.2 (344 mug/g kidney). Citrate buffer-eluted anti-BSA antibody was reactive in immunodiffusion, immunofluorescence, and radiolabeled BSA binding test systems, but complement fixation was impaired relative to chaotropic ion-eluted antibody. It was found that up to 75% of the eluted antibody was lost to further study by recombination with eluted BSA. This could be prevented by fractionation of the dissociated eluate before neutralization. IgG fractionated eluates were successfully fluorescein conjugated or radiolabeled for use as reagents. Elution of cryostat sections of CSS kidney was also studied; BSA, IgG, and complement (C3) eluted in parallel, and sub-microgram quantities of anti-BSA antibody were recovered.     

Conjugation of protein antigen to microparticulate β-glucan from Saccharomyces cerevisiae: a new adjuvant for intradermal and oral immunizations

Immunostimulatory glucose polymers known as β-glucans have been studied for many years. Our laboratory has prepared and characterized a novel microparticulate β-glucan (MG) from the budding yeast Saccharomyces cerevisiae. Because MG particles are rapidly phagocytized by murine peritoneal macrophages and induce the expression of B7 costimulatory molecules, we hypothesized that MG could serve as a vaccine adjuvant to enhance specific immune responses. Here, we describe a procedure for conjugating the test vaccine antigen bovine serum albumin (BSA) to MG via water-soluble carbodiimide linkage. Conjugates with up to 0.4 mg of BSA/mg MG were prepared. MG/BSA conjugates were still actively phagocytized by mouse peritoneal macrophages. When used to immunize mice by the intradermal route, these conjugates enhanced the primary IgG antibody response to BSA in a manner comparable to the prototypic complete Freund’s adjuvant. Although primary oral immunization with MG/BSA caused no increase in serum anti-BSA antibody titers, booster immunization elicited a significant anti-BSA antibody response. These results suggest that protein antigens can be conjugated to MG via a carbodiimide linkage and that these conjugates provide an adjuvant effect for stimulating the antibody response to the protein antigens.     

Characterization of fractionated polyclonal antibodies for immunoaffinity chromatography

Polyclonal anti-BSA antibodies were ractionated by stepwise elution from an immobilized BSA column by decreasing pH or increasing the concentration of NaSCN. The binding affinities of each fraction and original globulin under physiological conditions and their dependence on pH and ionic environments were compared. Fractions with high association constant under physiological conditions did not necessarily show antigen binding affinity over a wide pH range, but they retained a high affinity at higher ionic strength of NaSCN. Consequently, by combining these two fractionation procedures, a fraction with high affinity and which dissociated at moderate pH was obtained. It is clear that high affinity is not always incompatible with ease of dissociation accompanying a change in conditions.     

BSA载体蛋白抗体的去除

为了去除抗血清中BSA载体蛋白产生的抗体,一根对BSA载体蛋白抗体高度特异性的亲和柱被构建。结果表明：所构建的亲和柱对BSA载体蛋白抗体具高度特异性和亲和力,能有效地去除BSA载体蛋白产生的抗体。     

Further studies on cold insoluble circulating immune complexes in rabbits immunized with bovine albumin.

Cold insoluble circulating immune complexes of BSA and anti-BSA antibody are formed in vivo while immune catabolism of antigen is occurring. The effects of temperature, rate of precipitation and redissolvability of the cold insoluble antigen were studied in this model. Circulating BSA is soluble at 37 degrees, but may precipitate when the temperature is reduced. The solubility of antigen decreases at 24 degrees and below. Complete precipitation occurs in 5-7 days. The antigen in the cryoprecipitate is difficult to redissolve unless low pH citrate or glycine buffers are used.     

The requirement for the Fc portion of antibody in antigen-antibody complex-mediated suppression

The role of the Fc portion of antibody in immune complex-induced suppression was studied in vivo and in vitro. BSA pheasant anti-BSA complexes, formed in antigen excess (Ag1Ab1), were found to suppress both responses to BSA and SRBC. When complexes were formed with F(ab')2 fragments of pheasant anti-BSA, no suppression was observed, indicating that the Fc piece was indeed essential for the induction of Ag-Ab complex-mediated suppression.     

Giant unilamellar vesicles containing Rhodamine 6G as a marker for immunoassay of bovine serum albumin and lipocalin-2

Functionalized giant unilamellar vesicles (GUVs) containing a fluorescence dye Rhodamine 6G is proposed as a marker in sandwich-type immunoassay for bovine serum albumin (BSA) and lipocalin-2 (LCN2). The GUVs were prepared by the electroformation method and functionalized with anti-BSA antibody and anti-LCN2 antibody, respectively. The purification of antibody-modified GUVs was achieved by conventional centrifugation and a washing step in a flow system. To antigen on an antibody slip, antibody-modified GUVs were added as a marker and incubated. After wash-out of excess reagents and lysis of the bound GUVs with Triton X-100, the fluorescence image was captured. The fluorometric immunoassays for BSA and LCN2 exhibited lower detection limits of 4 and 80 fg ml⁻¹, respectively.     

A surface plasmon resonance probe with a novel integrated reference sensor surface

A surface plasmon resonance (SPR) sensor probe with integrated reference surface is described. In order to fabricate the integrated reference surface, two dielectric layers with different thickness were deposited on the single gold SPR sensor surface via plasma polymerization of hexamethyldisiloxane. The working sensor surface was a 34 nm dielectric layer with immobilized bovine serum albumin (BSA) antigen and an adjacent thin 1 nm dielectric layer without BSA provided reference surface. A specific immunoreaction of anti-BSA antibody was detected after immersion of the SPR probe into sample solution. Simultaneous observation of reference and working surface response enabled determination of the immunoreaction without the need for the baseline measurement. Moreover, compensation of nonspecific adsorption could be confirmed using anti-human serum albumin antibody.     

Preparation and characterization of temperature-sensitive poly(N-isopropylacrylamide)-b-poly(D,L-lactide) microspheres for protein delivery

Temperature-sensitive diblock copolymers, poly(N-isopropylacrylamide)-b-poly(D,L-lactide) (PNIPAAm-b-PLA) with different PNIPAAm contents were synthesized and utilized to fabricate microspheres containing bovine serum albumin (BSA, as a model protein) by a water-in-oil-in-water double emulsion solvent evaporation process. XPS analysis showed that PNIPAAm was a dominant component of the microspheres surface. BSA was well entrapped within the microspheres, and more than 90% encapsulation efficiency was achieved. The in vitro degradation behavior of microspheres was investigated using SEM, NMR, FTIR, and GPC. It was found that the microspheres were erodible, and polymer degradation occurred in the PLA block. Degradation of PLA was completed after 5 months incubation in PBS (pH 7.4) at 37 degrees C. A PVA concentration of 0.2% (w/v) in the internal aqueous phase yielded the microspheres with an interconnected porous structure, resulting in fast matrix erosion and sustained BSA release. However, 0.05% PVA produced the microspheres with a multivesicular internal structure wrapped with a dense skin layer, resulting in lower erosion rate and a biphasic release pattern of BSA that was characterized with an initial burst followed by a nonrelease phase. The microspheres made from PNIPAAm-b-PLA with a higher portion of PNIPAAm provided faster BSA release. In addition, BSA release from the microspheres responded to the external temperature changes. BSA release was slower at 37 degrees C (above the LCST) than at a temperature below the LCST. The microspheres fabricated with PNIPAAm-b-PLA having a 1:5 molar ratio of PNIPAAm to PLA and 0.2% (w/v) PVA in the internal aqueous phase provided a sustained release of BSA over 3 weeks in PBS (pH 7.4) at 37 degrees C.     

Improvement of proteolytic resistance of immunoadsorbents by chemical modification with polyethylene glycol

Immunoadsorbents were modified with monomethoxy-polyethylene glycol (PEG; average molecular weights of 5000 (PEG-5000) and 1900 (PEG-1900)) activated with cyanuric acid (activated PEG) by four different methods. In the two methods, anti-BSA antibodies were modified with activated PEG with and without protection of antigen binding sites with BSA and then were coupled to CNBr-activated Sepharose 4B. In the other two methods, Immunoadsorbents, which were prepared by coupling anti-BSA antibodies to CNBr-activated Sepharose 4B, were modified with activated PEG with and without the protection. The effects of PEG modification by these four methods on the binding ratio (the ratio of the numbers of moles of antigen adsorbed to the numbers of moles of binding sites of antibody coupled), the antigen binding property and the resistance to proteolytic digestion of immunoadsorbents were studied. The decrease in the binding ratio by the modification with activated PEG was small enough to use modified immunoadsorbents for industrial purification processes. The resistance to proteolytic digestion of immunoadsorbents was improved by modification with activated PEG. The modification without protection of antigen binding sites gave higher resistance to proteolytic digestion than that with protection, while the former caused larger decrease in the binding ratio of modification. The immunoadsorbents modified with activated PEG-5000 showed higher resistance to proteolytic digestion than those modified with activated PEG-1900.     

Neonatal splenic suppressor cells in the chicken. I. In vivo suppression of the immune response to bovine serum albumin by normal and tolerized neonatal spleen cells

The presence of active splenic suppressor cells in neonatal chickens, either normal or tolerant to bovine serum albumin (BSA), was examined by assessment of their effect on both primary and adoptively transferred secondary responses to BSA or sheep red blood cells (SRC). Both normal and BSA tolerized spleen cells were shown to be highly suppressive of secondary anti-BSA responses generated by specifically primed adult spleen cells in inert recipients. Suppression of the secondary anti-BSA response by normal spleen cells was slightly less effective than that seen with BSA tolerant spleen cells. Transfer of BSA tolerant spleen cells into normal recipients, followed by BSA challenge, prevented any significant primary anti-BSA response. In contrast, transfer of normal spleen cells into normal recipients, followed by BSA challenge, failed to show any suppression of the resulting primary response. Neither normal nor BSA tolerant neonatal spleen cells were capable of suppressing either primary or secondary responses to SRC. Thus, chickens tolerized to BSA have suppressor cells specific for the tolerizing antigen. We present evidence that both the tolerance associated suppressors and the suppressors detected in normal neonatal chickens are T cells.     

Immunosuppressive properties of a peptic fragment of BSA.

The immunogenic properties of a peptic fragment of BSA were investigated. BSA was subjected to limited proteolysis by pepsin and the resulting fragments were separated on DEAE cellulose. The fragment under consideration, Fraction Ia (m.w. 8000 to 10,000), did not precipitate with anti-BSA serum but did inhibi, the binding of specific antibody to labeled BSA, indicating the presence of determinants found on the native antigen. BDF1 mice immunized with Fraction Ia in A1 (OH)3 gel or in complete Freund's adjuvant produced no significant antibody response as measured by passive cutaneous anaphylited a (PCA) or by a modified Farr assay. The fragment elicited a PCA reaction in mouse skin sensitized with anti-BSA serum. Treatment of mice with single doses of Fraction Ia at various time intervals before immunization with BSA resulted in significant suppression of the formation of anti-BSA antibody. The conditions of suppresion of the IgE response by the peptic fragment were studied in greater detail. Evidence is presented that such suppression can be attributed to the presence of specific T suppressor cells in our system.     

Soluble Antigen Fluorescent-Antibody Technique

An indirect fluorescent-antibody (FA) procedure employing soluble antigen fixed onto an artificial matrix was developed, and a mechanical means for reading of test results was devised. The method employs two small cellulose acetate paper discs for each test. One disc contains soluble antigen diluted in 1% bovine serum albumin (BSA); the other contains only 1% BSA and serves as a control. After testing by the indirect FA procedure, the results of the tests are read on a fluorometer fitted with a paper chromatogram door. The instrument is set at zero with the control disc as a blank, and the specific fluorescence of the antigen disc is determined. Findings obtained with homologous and heterologous antisera indicated that the method yields excellent results. The soluble antigen fluorescent-antibody technique has definite advantages over the conventional indirect FA procedures. (i) The investigator may objectively select the antigen to be employed. (ii) It is possible to obtain objective mechanical reading of test results rather than the highly subjective readings required by conventional methods. (iii) The system compensates for any nonspecific fluorescence contributed either by the serum (e.g., drugs) or by free fluorescein in the conjugated antiserum.     

Labeless AC impedimetric antibody-based sensors with pgml(-1) sensitivities for point-of-care biomedical applications

This paper describes the development and characterisation of labeless immunosensors for (a) the cardiac drug digoxin and (b) bovine serum albumin (BSA). Commercial screen-printed carbon electrodes were used as the basis for the sensors. Two methods were used to immobilise antibodies at the electrode surface. Aniline was electropolymerised onto these electrodes to form a thin planar film of conductive polyaniline; the polyaniline film was then utilised as a substrate to immobilise biotinylated anti-digoxin using a classical avidin-biotin affinity approach. As an alternative approach, poly(1,2-diaminobenzene) was electrodeposited onto the carbon electrodes and this modified surface was then sonochemically ablated to form an array of micropores. A second electropolymerisation step was then used to co-deposit conductive polyaniline along with antibodies for BSA within these pores to produce a microarray of polyaniline protrusions with diameters of several mum, containing entrapped anti-BSA. The resulting antibody grafted electrodes were interrogated using an AC impedance protocol before and following exposure to digoxin or BSA solutions, along with control samples containing a non-specific IgG antibody. The impedance characteristics of both types of electrode were changed by increasing concentrations of antigen up to a saturation level. Calibration curves were obtained by subtraction of the non-specific response from the specific response, thereby eliminating the effects of non-specific adsorption of antigen. Both the use of microelectrode arrays and affinity binding protocols showed large enhancements in sensitivity over planar electrodes containing entrapped antibodies and gave similar sensitivities to our other published work using affinity-based planar electrodes. Detection limits were in the order of 0.1ngml(-1) for digoxin and 1.5ngml(-1) for BSA.     

Thermoresponsive protein adsorption of poly(N-isopropylacrylamide)-modified streptavidin on polydimethylsiloxane microchannel surfaces

The control of protein adsorption on microchannel surfaces is important for biosensors. In this study, we demonstrated protein adsorption method that is controlled through temperature change, i.e., thermoresponsive protein adsorption, on polydimethylsiloxane (PDMS) microchannel surfaces using a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAAm). To provide general protein adsorption control method, we adopted biotin-streptavidin chemistry and synthesized streptavidin covalently modified with PNIPAAm (PNIPAAm-StAv). Modification of streptavidin, a hydrophilic protein, with PNIPAAm induced successful thermoresponsive adsorption on a PDMS microchannel surfaces: PNIPAAm-StAv adsorbed at 37 degrees C and desorbed at 10 degrees C on the surfaces. We also demonstrated the thermoresponsive adsorption of biotinylated immunoglobulin G (IgG-b) using PNIPAAm-StAv. Conjugation of IgG-b with PNIPAAm-StAv induced successful thermoresponsive IgG-b adsorption on PDMS. Modification of PDMS surfaces with PNIPAAm reduced physical adsorption of the partially hydrophobic IgG-b on the surface and contributed to the high-contrast thermoresponsive adsorption of IgG-b: less than 1% of the IgG-b adsorbed at 37 degrees C was detected after the PNIPAAm-PDMS surface was washed at 10 degrees C. The controllable adsorption of this system is expected to be applied to the regeneration of biosensor chips and to on-chip protein manipulation.     

Idiotype regulation of the anti-bovine serum albumin response. I. Generation of an idiotype-specific Lyt-1-2+ suppressor T cell

A monoclonal antibody (3C-7) specific for a determinant localized on the carboxy-terminus of the BSA molecule (P505-582) has been shown to cause suppression of the multispecific BSA antibody response if given i.v. before immunization. The fine binding specificity and the isotype subclass are not responsible for the suppression generated. Administration of 3C-7 i.v. results in the generation of a suppressor T cell that, when transferred into reconstituted irradiated mice, results in a diminished anti-BSA response. Suppression can be eliminated by panning T cells on idiotype (3C-7) coated plates, but not by panning on BSA, polyclonal anti-BSA antibodies, or MOPC 21. The action of the cell is antigen (BSA) specific. Idiotype-binding T cells reconstitute suppression and appear to be Lyt-1-2+. These observations demonstrate that a limited set of monoclonal antibodies directed against a single determinant on a protein molecule have the capacity to regulate the immune response to a multiplicity of determinants present on the same protein. These data support the concept of antibody-induced regulation by the induction of suppressor cells through idiotype recognition.     

纳米多孔硅阻抗生物传感器的研究

构建了1种基于多孔硅材料,无需标记的纳米生物传感器,用于对牛血清白蛋白分子进行检测。通过对多孔硅进行表面处理,形成氧化膜,将抗体固定到多孔硅氧化层表面。在磷酸盐缓冲液中,通过电化学检测系统检测加入抗原后,传感器的阻抗值的变化。磷酸缓冲液（PBS）/抗体-氧化层/硅,构成电解液/绝缘层/半导体（electro-lyte-insulator-semiconductor,EIS）结构。传感器的线性检测范围为0.01～0.27mg/mL,检测限为0.01mg/mL。     

Immunocytochemical localization of bovine serum albumin (BSA) in the liver and testis of rats injected with testosterone-BSA, hydrocortisone-BSA or corticosterone-BSA

Through observations of colloidal gold with silver enhancement, we have demonstrated that 2-nm colloidal gold labeled-testosterone-bovine serum albumin (BSA) conjugate or hydrocortisone-BSA conjugate injected intravenously enters the hormone-target cell nuclei of rats (Nishimura and Ichihara, 1997; Nishimura and Nakano, 1997, 1999). To confirm immunocytochemically whether the nature of BSA in the steroid hormone-BSA conjugates (steroid-BSAs) remains intact in the hormone-target cell nuclei, testosterone-BSA, hydrocortisone-BSA or corticosterone-BSA was injected into the vascular system of rats, then the liver and testes of rats killed 2 h postinjection were reacted with FITC-conjugated anti-BSA antibody, and examined under fluorescence microscopy and confocal laser scanning microscopy. In the liver of rat injected with testosterone-BSA, the fluorescence was observed in the nuclei of endothelial cells, but not in the nuclei of hepatocytes, hepatic stellate cells and Kupffer cells. In the liver of rat injected with hydrocortisone-BSA, intense fluorescence was seen in the nuclei of hepatic stellate cells, but did not seem to be present in the nuclei of the other three kinds of cells. In the liver of rat injected with corticosterone-BSA, the fluorescence seemed to be in a few nuclei of hepatic stellate cells, and appeared as speckles in a few nuclei of the hepatocytes and Kupffer cells. In some seminiferous tubules of rat injected with testosterone-BSA, fluorescence was observed in the nuclei of spermatocytes and spermatids. These results suggest that BSA conjugated with steroid hormone can enter the hormone-target cell nuclei with its antigenicity kept intact, and that the fate of steroid-BSAs is decided at the cell membrane level.     

Temperature control of biotin binding and release with A streptavidin-poly(N-isopropylacrylamide) site-specific conjugate.

The many laboratory and diagnostic applications utilizing streptavidin as a molecular adaptor rely on its high affinity and essentially irreversible interaction with biotin. However, there are many situations where recovery of the biotinylated molecules is desirable. We have previously shown that poly(N-isopropylacrylamide) (PNIPAAm), a temperature-sensitive polymer, can reversibly block biotin association as the polymer's conformation changes at its lower critical solution temperature (LCST). Here, we have constructed a streptavidin-PNIPAAm conjugate which is able to bind biotin at room temperature or lower and release bound biotin at 37 degrees C. The conjugate can repeatedly bind and release biotin as temperature is cycled through the LCST. A genetically engineered streptavidin mutant, E116C, which has only one cysteine residue, was conjugated site specifically via the sulfhydryl groups with a PNIPAAm that has pendent sulfhydryl-reactive vinyl sulfone groups. The conjugation site is near the tryptophan 120 residue, which forms a van der Waals contact with biotin that is important in generating the large binding free energy. The temperature-induced conformational change of the polymer at position 116 may lead to structural changes in the region of tryptophan 120 that are responsible for the reversible binding between biotin and the conjugated streptavidin.     

Total internal reflection fluorescence study of energy transfer in surface-adsorbed and dissolved bovine serum albumin

A simple adaptation of a commercial spectrofluorometer allows selective excitation of fluorescent biomolecules adsorbed to a solid surface while they are in equilibrium with a bulk solution. As a demonstration of this technique, we have detected a change in the effective singlet-singlet energy transfer in fluorescence-labeled bovine serum albumin (BSA) upon adsorption to a fused silica surface. The technique combines total internal reflection fluorescence excitation of surface-adsorbed BSA with a fluorescence spectroscopic examination of energy transfer between two different fluorophores that are covalently bound to amino groups in each BSA molecule. Two donor--acceptor pairs were used, 4-chloro-7-nitro-2,1,3-benzoxadiazole-rhodamine and dansyl-eosin. For studies of surface-adsorbed BSA, we constructed a device in which the excitation light of a standard fluorescence spectrometer totally internally reflects from a surface at which adsorbed BSA is in equilibrium with the bulk solution. A shallow evanescent wave is created, which excites fluorescence from only those BSA molecules in close proximity to the surface. Spectral examination shows significantly less effective singlet-singlet energy transfer from the donor to the acceptor in surface-adsorbed BSA relative to that in native bulk-dissolved BSA. Under appropriate and reasonable assumptions, the energy transfer change between native and adsorbed states of fluorescent BSA can be interpreted as a conformational change of BSA upon adsorption.