Active microwave tomographic imaging of isolated, perfused animal organs

The relative transparency of biological materials to high-frequency electromagnetic waves has encouraged the development of new systems for imaging. This report describes experiments of microwave tomography conducted on a prototype. The object to be analyzed is submerged in water and is illuminated by a plane wave. The total electric field is analyzed by a microwave camera. The recorded data are then processed numerically in order to reconstruct the image that corresponds to the distribution of equivalent currents in a defined plane of a section. Experiments have been conducted on isolated kidneys with and without perfusion. The influence of the perfusing solution temperature has also been studied. These experiments show the potential of this system, especially through the correlation between microwave images and the biological structures. They also confirm previous results concerning spatial resolution and depth of exploration. Finally, the results demonstrate the influence of temperature and support the applicability of this imaging system in non-invasive thermometry, especially for clinical hyperthermia.     

Beam-plasma interaction in a hybrid plasma waveguide in the pulsed mode of microwave generation

Results are presented from experimental studies of the energy spectra of an electron beam in a model beam-plasma oscillator based on a hybrid plasma waveguide in the pulsed mode of microwave generation with a pulse duration of 1 µs or shorter. The beam energy spent on sustaining the beam-plasma discharge in a slow-wave structure is measured. A correlation between the type of excited waves and the generation of a group of accelerated beam electrons with energies exceeding the injection energy is revealed. It is shown that the pulsed mode of microwave generation is related to the time variations in the plasma density profile in the waveguide and the trapping of beam electrons by the excited microwave field.     

Experimental study of the plasma effect on the generation of microwave radiation in systems with a virtual cathode

Results are presented from experimental studies of the plasma effect on the generation of microwave radiation in systems with a virtual cathode. Using a triode with a virtual cathode as an example, it is shown that the cathode and anode plasmas reduce the generation efficiency; in particular, the power of the generated microwave radiation decreases and the radiation frequency and the microwave pulse duration change appreciably. It is demonstrated that, at high microwave powers, the power radiated into free space can be reduced by the plasma generated at the surface of the output window. This plasma appears due to discharges developing on the window surface under the combined action of bremsstrahlung, UV radiation, electrons and ions arriving from the beam formation zone, and the microwave electric field.     

2D calculation method based on composite beam theory for the determination of local homogenised stiffnesses of long bones

A calculation method using the finite element technique is presented. Its main objective was to determine strains, stresses and more particularly stiffnesses in any cross section of a tibia, thus enabling the localisation of tibial torsion in vivo. Each tibial cross section was considered to be a non-uniform cross section of a composite beam with arbitrary orientation of fibres. The determination of stresses, strains and stiffnesses within a composite beam cross section has been defined by solving a variational problem. The validation of this method was performed on a tibial diaphysis of which each cross section was assumed to be the cross section of a composite beam made of orthotropic materials with orthotropic axes of any orientation with respect to the principal axis of the bone. The comparison of the results, from our model and that of a three-dimensional one, was performed on each nodal value (strains, stresses) of the meshed cross section as it was impossible to obtain local stiffnesses by experimentation. The good agreement between the results has validated our finite element program. Actually, this method has enabled to treat directly 2D geometric reconstructions from CT scan images with a good accuracy to determine locally the homogenised mechanical characteristics of human tibia in vivo, and particularly to quantify torsional tibial abnormalities of children without approximation of the shape of the cross section and by calculating the real moment of inertia J. The importance of the fibre orientation with regards to the stiffness values has been emphasised. This 2D method has also allowed to reduce CPU time of the 3D modelling and calculation.     

Effect of the dc field on the near-surface plasma of a highly nonuniform microwave discharge

The effect of the dc electric field on the near-surface plasma of an electrode microwave discharge at pressures of 1?C5 Torr was studied by the emission spectroscopy method. It is shown that the dc field weakly affects the vibrational distribution of nitrogen molecules in the C₃??_u state, but changes the structure of the near-surface plasma (shifting the intensity maxima of the emission bands) and the strength of the microwave field near the electrode surface. It is also found that the ratio between the intensities of bands of different sequences of the second positive system of nitrogen radiated from the same state depends on the position along the discharge axis.     

Analysis of the differential cross section for ionization of a hydrogen atom by fast electrons in a uniform electric field

The differential cross section for ionization of a hydrogen atom by fast electrons in an external uni-form electric field is calculated using the nonrelativistic Born approximation. It is shown that the cross section obtained can differ substantially from a similar ionization cross section of an isolated atom in the angular dis-tribution of secondary electrons in momentum space, oscillation terms, and magnitude.     

Multipactor discharge on a dielectric at different inclination angles of the microwave electric field relative to the dielectric surface

Multipactor discharge on a dielectric is studied numerically and analytically for different inclination angles α of the microwave electric field with respect to the dielectric surface. The power absorbed in the discharge is calculated, and analytic estimates for the average current density of secondary electrons and the average energy of electrons bombarding the dielectric surface are obtained as functions of the angle α and the electron oscillation energy in the microwave field. It is found that the dependence of the absorbed power on the inclination angle of the external microwave field has a minimum at α ～20°–30°.     

Parameters of microwave discharge plasmas in powder mixtures

A study is made of the optical emission spectra of a plasma produced under the action of a microwave beam with a field amplitude of about 3 kV/cm on a metal-dielectric mixture at atmospheric pressure. In the initial stage of the discharge, the plasma is localized in microscale sites at the target surface, the characteristic size of the glowing regions in the target plane being less than 1 mm. In this stage, the target material is evaporated and atomic spectral lines with excitation energies of up to 6–8 eV are emitted. The population temperature of the excited levels, which was determined from the intensity ratios of atomic spectral lines, can be interpreted as the temperature of the atmospheric-pressure plasma. The temperatures determined from different pairs of lines belonging to the same or different elements (Cu, Mo, Li, Fe) fall within the range 7000–9000 K. In the later stage of the discharge, when the characteristic plasma size reaches a few centimeters, no atomic lines are present in the spectrum, which corresponds to a Planckian continuum with a temperature of 2400–3200 K.     

Effect of microwave radiation on a dusty plasma

The effect of microwave radiation on a complex plasma produced by an external ionizer is studied using numerical simulations. It is shown that, as the radiation intensity increases, the scattering of the incident radiation by charged metal grains is enhanced and radiation at the second harmonic of the incident radiation appears in the scattered spectrum. This effect is associated with the grain charge oscillations caused by the nonlinear action of the microwave field. It is found that, under the action of strong microwave radiation, the grain charge can increase by one order of magnitude. It is shown that, when the microwave intensity is high enough, the distribution of the electric field near a dust grain is shown to change so radically that the field component normal to the grain surface can even change its sign.     

Magnetic-Based Fano Resonance by a Trimer with Y-shaped Gap

We introduce a Y-shaped gap into a silver disk to break the structure symmetry which can be looked as a loop-linked structure. Magnetic resonances are excited by incident light when incident electric field is parallel to the trimer plane. Fano resonance is generated by the coupling between bright electric mode and dark magnetic mode. These resonances can be adjusted by tuning the gap size, the radius of trimer, and the position of Y-shaped gap. The extinction cross section of the structure is calculated with the finite element method (FEM). The maximum figure of merit (FOM) is 37.8. Both the magnetic and electric field are greatly enhanced at the Fano dip and the magnetic resonance peak.     

Investigation of low-frequency waves in plasma-filled microwave oscillators

The excitation of microwave oscillations by an electron beam in a hybrid plasma waveguide—a slow-wave structure (a sequence of inductively coupled resonators) with a plasma-filled transport channel—is studied both experimentally and theoretically. It is shown that the governing role in the generation of microwaves and their transmission to a feeder line is played by the spatial and temporal plasma-density variations associated with low-frequency ion plasma oscillations. The microwave pressure gives rise to low-frequency plasma oscillations with a rise time shorter than their period. This nonlinear mechanism for the excitation of low-frequency oscillations has a threshold in terms of the microwave power. The unsteady character of the spatial distribution of the plasma density results in intermittent microwave generation and shortens the duration of microwave pulses.     

Spatial structure of emission from an electrode microwave discharge in hydrogen

The structure of electrode microwave (2.45 GHz) discharges in hydrogen with electrodes of various shapes and sizes at pressures of 1–8 torr and incident powers of 2–150 W is studied. It is found that the discharges exhibit a common feature that is independent of the antenna-electrode design: near the electrode surface, there is a thin bright sheath surrounded by a less bright, sharply bounded region, which is usually shaped like a sphere. It is suggested that the structure observed arises because the microwave field maintaining the discharge is strongly nonuniform. Near the electrode, there exists a thin dense plasma sheath with a high electron density gradient. A strong dependence of the electron-impact excitation coefficient on the electric field makes the effect even more pronounced. As the electron density decreases due to dissociative recombination, the microwave field gradient decreases and the discharge emission intensity tends to a nearly constant value. Presumably, in the boundary region of the discharge, there exists a surface wave, which increases the emission intensity at the periphery of the discharge.     

A model of the electric field of the brain at EEG and microwave frequencies

A simple calculation of the current dipole moment of the extracellular electric field of the cortex is proposed; it is based on the dipole layer model. The model is extended to the range of microwave frequencies. Arguments in favor of emission of microwave radiation by the dendritic membranes of pyramidal neurons are presented and the strength of the radiative electric field at a distance from the head is calculated and discussed.     

Initiation of solid-phase chemical reactions in powder mixtures by microwave discharges

The initiation of exothermic chemical reactions in powder (metal-dielectric) mixtures by irradiating them with a high-power microwave beam is investigated. The initial stage of microwave breakdown is accompanied by the emission in the atomic lines of the metal component of the mixture (Ti, Mo, Sn, Al, etc.). The subsequent microwave discharge generates a continuous optical spectrum, the temperature of the effective Planckian radiator being 2000–3000 K. A prolonged radiation of the mixture after the end of the microwave pulse is caused by the energy release in chemical reactions.     

Salt-assisted acid hydrolysis of chitosan to oligomers under microwave irradiation

The effect of inorganic salts such as sodium chloride on the hydrolysis of chitosan in a microwave field was investigated. While it is known that microwave heating is a convenient way to obtain a wide range of products of different molecular weights only by changing the reaction time and/or the radiation power, the addition of some inorganic salts was shown to effectively accelerate the degradation of chitosan under microwave irradiation. The molecular weight of the degraded chitosan obtained by microwave irradiation was considerably lower than that obtained by traditional heating. Moreover, the molecular weight of degraded chitosan obtained by microwave irradiation assisted under the conditions of added salt was considerably lower than that obtained by microwave irradiation without added salt. Furthermore, the effect of ionic strength of the added salts was not linked with the change of molecular weight. FTIR spectral analyses demonstrated that a significantly shorter time was required to obtain a satisfactory molecular weight by the microwave irradiation-assisted inorganic salt method than by microwave irradiation without inorganic salts and conventional technology.     

A circular dichroism study of human erythrocyte ghost proteins during exposure to 2450 MHz microwave radiation

The effect of 2450 MHz microwave radiation on the proteins of human erythrocyte ghosts has been investigated using circular dichroism spectroscopy. A specially constructed waveguide inserted into the spectropolarimeter allowed the continuous recording of optical activity before, during and after microwave irradiation. The data indicate that high levels of microwave radiation (600 mW/g, specific absorption rate) induce decreases in alpha-helical conformation that may result from both thermal vibrations and increased strain on the intramolecular hydrogen bonds that maintain secondary structure. The latter effect may result from differential intramolecular interactions with the oscillating electric field. Spectrin (bands 1 and 2) isolated from the ghosts was more sensitive to microwave irradiation than intact ghosts, and spectrin-depleted vesicles were the least sensitive. The data, therefore, indicate that the alpha-helical conformation of spectrin is altered by high levels of microwave radiation.     

A circular dichroism study of human erythrocyte ghost proteins during exposure to 2450 MHz microwave radiation

The effect of 2450 MHz microwave radiation on the proteins of human erythrocyte ghosts has been investigated using circular dichroism spectroscopy. A specially constructed waveguide inserted into the spectropolarimeter allowed the continuous recording of optical activity before, during and after microwave irradiation. The data indicate that high levels of microwave radiation (600 mW/g, specific absorption rate) induce decreases in α-helical conformation that may result from both thermal vibrations and increased strain on the intramolecular hydrogen bonds that maintain secondary structure. The latter effect may result from differential intramolecular interactions with the oscillating electric field. Spectrin (bands 1 and 2) isolated from the ghosts was more sensitive to microwave irradiation than intact ghosts, and spectrin-depleted vesicles were the least sensitive. The data, therefore, indicate that the α-helical conformation of spectrin is altered by high levels of microwave radiation.     

Experimental study and numerical simulations of a plasma relativistic microwave amplifier

The dependences of the radiation parameters of a plasma relativistic microwave amplifier on the external factors have been studied both experimentally and numerically. The calculated dependences are found to agree qualitatively with the measured ones. In contrast to experimental studies, numerical simulations make it possible to examine physical processes occurring inside the plasma waveguide. Good agreement between the measured and calculated dependences of the radiation parameters on the external factors shows that information provided by numerical simulations of the processes occurring inside the plasma waveguide can be considered quite reliable. The electromagnetic field structure and electron beam dynamics inside the plasma waveguide have been investigated.     

Formation of space-charge bunches in a multivelocity-electron-beam-based microwave oscillator with a cathode unshielded from the magnetic field

The influence of the magnitude and configuration of the magnetic field on the parameters of electron bunches formed in a multivelocity electron beam is analyzed. It is shown that the use of a cathode unshielded from the magnetic field and a nonuniform magnetic field increasing along the drift space enables the formation of compact electron bunches. The ratio between the current density in such bunches and the beam current density at the entrance to the drift space reaches 10⁶, which results in a substantial broadening of the output microwave spectrum due to an increase in the amplitudes of the higher harmonics of the fundamental frequency.     

Root-soil contact of maize,as measured by a thin-section technique

In models of oxygen, water and nutrient uptake by plant roots, the degree of root-soil contact is an important parameter. An observation technique is required to evaluate to what extent root-soil contact depends on plant species, soil texture and structure. Thin sections for studying soil structure may be used for this purpose, provided that roots do not shrink during section preparation, and that all root cross sections are recognized.Maize was grown in pots with soil aggregates obtained by sieving and compacting to three bulk densities. Thin sections were made by freeze-drying samples before impregnating the soil with resin. Two checks were made on the validity of the method. Firstly, visual appearance of roots with intact epidermis, cortex and other tissues did not show signs of shrinkage. Secondly, the agreement was checked between root lengths obtained by washing duplicate soil samples and the number of root cross sections counted on horizonal and vertical thin sections. For the latter, the angle at which roots intersected the thin-section plane was determined from the shape of the cross sections. The frequency distribution of calculated angles was in agreement with the frequency distribution expected for a randomly oriented set of cylinders when an error term was included in the simulated measurements.Some results are presented for a field test of the thin-section method with barley on a calcareous marine sandy loam. Root hairs, apparently undamaged by sample preparation, are important for bridging the gap between roots and soil in this situation. According to the experience presented, the thin-section technique is suitable to derive the degree of root-soil contact, as influenced by species, soil texture and structure, in samples obtained from pot or field experiments.Communication No. 43 of the Dutch Programme on Soil Ecology of Arable Farming Systems.Communication No. 43 of the Dutch Programme on Soil Ecology of Arable Farming Systems.