生物组织光声粘弹显微成像

提出一种反演生物组织粘弹信息的新型无损光声粘弹显微成像方法,它是以强度调制激光作为激发源,通过检测光声（Photoacoustic,PA）信号的相位重建组织粘弹特性分布的成像方法.实验利用不同浓度的琼脂样品来验证光声粘弹显微测量中相位随浓度变化的依赖关系.利用埋有头发丝的琼脂样品来测试这种显微方法的成像分辨率.利用具有不同粘弹性的离体生物组织来验证系统的成像能力.实验结果表明,这种新方法能够高分辨率和高对比度地重建出具有不同粘弹性的生物组织的光声粘弹显微图像,有望实现组织结晶类病变水平的显微在体检测.     

植物叶片的相位解析光声光谱和光声相位谱

用相位解析法获得的未损伤植物叶片叶肉组织的光声光谱,与叶片的光声相位谱进行了比较．发现植物叶片的光声相位谱与叶绿体光吸收带之间呈现互补关系．叶片表皮的光声相位谱存在持有的波谷结构．不同调制频率的光声相位谱有较大的差异．这些现象表明光声相位谱与光声光谱一样,也可对未损伤的层状生物样品作深度剖面分析．     

生物细胞相位显微技术研究进展

相位显微技术,作为一种非侵入式无损伤的生物细胞检测及研究工具,受到了广泛的关注.从定性和定量两个方面综述了生物细胞相位显微技术的研究现状,具体介绍了定量全场相位显微技术的新进展.在此基础上,指出了现有生物细胞相位显微技术有待改进的一些共性问题,并预测了该技术的发展趋势.     

两种微体化石三维无损成像技术的对比

近年来,各种X射线三维无损成像技术在古生物学领域的应用越来越广泛。但是,不同的X射线三维无损成像技术针对不同保存类型和尺寸的化石标本在成像效果上各有利弊。本文以埃迪卡拉纪陡山沱组磷酸盐化的动物胚胎化石为研究对象,将目前应用最广的两种X射线三维无损成像方法,即基于实验室X光源的吸收衬度显微断层成像技术和基于同步辐射光源的相位衬度显微断层成像技术进行了对比分析。通过对两种技术的原理、效率、空间分辨率和图像衬度的对比,认为基于同步辐射光源的相位衬度显微断层成像技术是目前对于均一矿化的微体化石最佳的三维无损成像解决方案。     

具有共同感受野的外膝体神经元的反应相位互补特性

用微电极在猫外膝体进行记录时,有时同一支微电极能同时记录到两个神经元放电,通常是一个给光中心细胞和一个撤光中心细胞。这一对神经元具有共同的感受野,并且对光刺激的反应类型也相同(同属于瞬变型细胞,或者同属于持续型细胞)。当正弦调制的光点投射在它们的感受野中心时,在不同的刺激强度下,给光中心细胞和撤光中心细胞的反应相位彼此相差半个周期(180°)。在低的刺激频率(5Hz)下,给光中心和撤光中心细胞的反应峰值延迟时间(相对于光调制信号的最大和最小值)也相同,表明它们具有相同的反应潜伏期。这种相位互补特性使具有共同感受野的一对细胞工作于“推挽”方式。对于瞬变型细胞来说,尽管它们在单独活动时显示半波整流特性,然而组成互补对以后则能传递全周期光调制信号。     

浅析生物细胞相位显微技术研究进展

随着社会经济的迅速发展,医学领域有了一定的发展,生物细胞是构成生命的重要单位,而且一直都是业界主要研究的对象。生物细胞相位显微技术,作为一种非侵入式无损伤的生物细胞检测及研究工具,得到了研究人员广泛的关注。因此,加大对生物细胞相位显微技术的研究力度,具有现实意义。本文将对生物细胞定性相位显微技术、生物细胞定量相位显微技术以及生物细胞相位纤维技术的发展趋势进行研究,以此来推进生物相位显微技术的发展。     

利用散射光声微分成像技术实现弱吸收物质显微成像

光声显微成像技术依赖于样品的内源性光吸收,对强散射弱吸收样品成像效果差,甚至无法进行成像。为了实现强散射弱吸收高透明生物样品的光声显微成像,以及获得图像的边缘增强效果,使光声显微成像技术在实际的生物医学研究中更有应用价值,本文首次将散射光声技术引入到光声微分显微技术中,研制了新型的散射光声微分成像技术。该技术不仅可以获得强散射弱吸收高透明生物样品的散射光声显微图像,还可以获得对应的边缘清晰的散射光声微分图像,对在生物医学研究领域有重要的应用意义。     

基于非线性热扩散效应的亚衍射极限光声二次谐波显微成像技术

本文提出了一种基于非线性热扩散效应的光声二次谐波显微SH-PAM成像技术,用于实现亚衍射极限光声成像。生物组织受到强度调制的高斯激光束辐射时,组织吸收光子形成高斯分布的温度场,由于热扩散系数非线性热效应引起的非线性光声PA效应,从而产生光声二次谐波信号。模拟和试验结果均表明,重建后的光声二次谐波成像的横向分辨率超过了传统光学成像分辨率。本文通过仿体样品验证了该方法的可行性,并且对人表层皮肤细胞进行了成像,以证明其对生物样品的成像能力。该方法扩展了传统光声成像的范围,为超分辨成像开辟了新的可能性,为生物医学成像和材料检测提供了新的方法。     

新疆阿魏特征显微结构的三维原位无损研究

利用新型第三代高亮度同步辐射光源相衬成像技术,可实现弱吸收(主要含碳、氢、氧和氮等元素)物质材料特征结构的无损三维鉴定。以具有极高药用价值的新疆地产药材——阿魏(Ferula)为研究对象,采用同步辐射高分辨X射线相衬显微CT技术,并结合相位恢复算法,有效解析和评价了新疆阿魏(F.sinkiangensis)的三维特征结构,极大提高了对药材类生物样品的显微结构和密度的分辨能力,从而为新疆阿魏的特征分辨、品质鉴定和真伪识别提供了一种直观可靠的三维可视化新手段。     

用管式光生物反应器培养螺旋藻的研究

微藻大规模培养主要有敞开式大池培养和封闭式光生物反应器培养两种主要方式。管式光生物反应器是封闭式光生物反应器的主要类型之一。与其它类型相比,管式光生物反应器放大较易,成本较低。国外关于管式光生物反应器已有不少研究［１～３］但关于管式光生物反应器产率与光强和光暗比的关系等方面的研究尚未得出明确的结论。国内管式光生物反应器的研究较少［４］,尚未见有关管式光生物反应器中微藻悬浮液流变特性基础参数和产率影响因素的报道。螺旋藻是丝状体蓝藻,螺旋藻蛋白质含量高,其蛋白质所含必需氨基酸丰富,是国内外大规模商业…     

Automated analysis of living cells through the quantitative use of automated phase contrast microscopy

A simplified theory of image formation in phase contrast microscopy is presented. It is shown that the phase shift induced in light (related to the refractive index) by the observed object can be reconstructed, point by point, from the phase-contrast digitally sampled image through an appropriate algorithm. This allows one to make quantitative observations on unstained, living cells.     

Advantages of intermediate X-ray energies in Zernike phase contrast X-ray microscopy

Understanding the hierarchical organizations of molecules and organelles within the interior of large eukaryotic cells is a challenge of fundamental interest in cell biology. Light microscopy is a powerful tool for observations of the dynamics of live cells, its resolution attainable is limited and insufficient. While electron microscopy can produce images with astonishing resolution and clarity of ultra-thin (< 1 μm thick) sections of biological specimens, many questions involve the three-dimensional organization of a cell or the interconnectivity of cells. X-ray microscopy offers superior imaging resolution compared to light microscopy, and unique capability of nondestructive three-dimensional imaging of hydrated unstained biological cells, complementary to existing light and electron microscopy.     

THE USE OF INTERFERENCE REFLECTION CONTRAST IN THE EXAMINATION OF DIATOM VALVES

Even though scanning electron microscopy (SEM) is now needed to identify some species of diatoms, the majority of identifications and quantification of these organisms in ecological works is accomplished with a light microscope, using transmitted light optical methods. In this paper we demonstrate the use of interference reflection contrast (incident light) for the examination of diatoms, a method that significantly improves the resolution of structural detail, and therefore, identification of diatom taxa with light microscopy. Using incident light we were routinely able to distinguish between structures that were close to the theoretical limit of resolution for visible light, and that were not resolvable with such standard transmitted light techniques as phase contrast and differential interference contrast (DIC). Light microscopes with epi-illumination light paths can be easily and inexpensively outfitted to use this simple technique.
Abbreviations:  DIC, differential interference contrast; IRC, interference reflection contrast; LM, light microscopy     

High-resolution single-shot phase-shifting interference microscopy using deep neural network for quantitative phase imaging of biological samples

White light phase-shifting interference microscopy (WL-PSIM) is a prominent technique for high-resolution quantitative phase imaging (QPI) of industrial and biological specimens. However, multiple interferograms with accurate phase-shifts are essentially required in WL-PSIM for measuring the accurate phase of the object. Here, we present single-shot phase-shifting interferometric techniques for accurate phase measurement using filtered white light (520±36 nm) phase-shifting interference microscopy (F-WL-PSIM) and deep neural network (DNN). The methods are incorporated by training the DNN to generate (a) four phase-shifted frames and (b) direct phase from a single interferogram. The training of network is performed on two different samples i.e., optical waveguide and MG63 osteosarcoma cells. Further, performance of F-WL-PSIM+DNN framework is validated by comparing the phase map extracted from network generated and experimentally recorded interferograms. The current approach can further strengthen QPI techniques for high-resolution phase recovery using a single frame for different biomedical applications.     

Imaging biological samples by integrated differential phase contrast (iDPC) STEM technique

Scanning transmission electron microscopy (STEM) is a powerful imaging technique and has been widely used in current material science research. The attempts of applying STEM (annual dark field (ADF)-STEM or annular bright field (ABF)-STEM) into biological research have been going on for decades while applications have still been limited because of the existing bottlenecks in dose efficiency and non-linearity in contrast. Recently, integrated differential phase contrast (iDPC) STEM technique emerged and achieved a linear phase contrast imaging condition, while resolving signals of light elements next to heavy ones even at low electron dose. This enables successful investigation of beam sensitive materials. Here, we investigate iDPC-STEM advantages in biology, in particular, chemically fixed and resin embedded biological tissues. By comparing results to the conventional TEM, we have found that iDPC-STEM not only shows better contrast but also resolves more structural details at molecular level, including conditions of extremely low dose and minimal heavy-atom staining. We also compare iDPC-STEM with ABF-STEM and found that contrast of iDPC-STEM is even further improved, moderately in lower frequency domains while highly with preserving high frequency biological structural details. For thick sample sections, iDPC-STEM is particularly advantageous. It avoids contrast inversion canceling effects, and by adjusting the depth of focus, fully preserves the contrast of structural details along with the sample. In addition, using depth-sectioning, iDPC-STEM enables resolving in-depth structural variation. Our results suggest that iDPC-STEM have the place and advantages within the future biological research.     

Phase contrast electron microscopy: development of thin-film phase plates and biological applications

Phase contrast transmission electron microscopy (TEM) based on thin-film phase plates has been developed and applied to biological systems. Currently, development is focused on two techniques that employ two different types of phase plates. The first technique uses a Zernike phase plate, which is made of a uniform amorphous carbon film that completely covers the aperture of an objective lens and can retard the phase of electron waves by pi/2, except at the centre where a tiny hole is drilled. The other technique uses a Hilbert phase plate, which is made of an amorphous carbon film that is twice as thick as the Zernike phase plate, covers only half of the aperture and retards the electron wave phase by pi. By combining the power of efficient phase contrast detection with the accurate preservation achieved by a cryotechnique such as vitrification, macromolecular complexes and supermolecular structures inside intact bacterial or eukaryotic cells may be visualized without staining. Phase contrast cryo-TEM has the potential to bridge the gap between cellular and molecular biology in terms of high-resolution visualization. Examples using proteins, viruses, cyanobacteria and somatic cells are provided.     

Single-shot phase contrast microscopy using polarisation-resolved differential phase contrast

We present a robust, low-cost single-shot implementation of differential phase microscopy utilising a polarisation-sensitive camera to simultaneously acquire four images from which phase contrast images can be calculated. This polarisation-resolved differential phase contrast (pDPC) microscopy technique can be easily integrated with fluorescence microscopy.     

Confocal scanning microscopy: three-dimensional biological imaging

Confocal scanning optical microscopy, arguably the most significant in biological light microscopy in this decade, enables one to obtain quantitative non-invasive optical sections through labelled biological specimens, virtually free from out-of-focus blur. A set of these optical sections collected at a series of focal levels through an object constitutes a three-dimensional image which may then be processed digitally for display as a computer reconstruction, a stereo pair or an animation sequence.