Isolation and characterization of lactic acid bacteria from suan-tsai (fermented mustard), a traditional fermented food in Taiwan

AIMS: To isolate, characterize, and identify lactic acid bacteria (LAB) in suan-tsai (fermented mustard), a traditional fermented food in Taiwan. METHODS AND RESULTS: Suan-tsai samples were collected at five time points from a fixed fermenting bucket. Fifty cultures were isolated from suan-tsai samples, and isolates were divided into classes by phenotype and then into groups by restriction-fragment length polymorphism analysis and sequencing of 16S ribosomal DNA. Phenotypic and biochemical characteristics identified two different bacterial groups (A and B), and the results showed that Pediococcus pentosaceus was the most abundant LAB during the initial fermentation time. However, the more NaCl-tolerant species Tetragenococcus halophilus took the place of P. pentosaceus and became the most abundant LAB later. All isolates were grown in de Man, Rogosa, and Sharpe (MRS) broth containing 6% NaCl, but T. halophilus could grow only in MRS broth containing 10% NaCl. CONCLUSIONS: These results suggest that the LAB P. pentosaceus and T. halophilus play roles in the fermentation of suan-tsai. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first report describing the distribution and varieties of LAB that exist in the suan-tsai fermentation process.     

Isolation and characterization of halophilic lactic acid bacteria isolated from "terasi" shrimp paste: a traditional fermented seafood product in Indonesia

Lactic acid bacteria from "terasi" shrimp paste, a highly popular fermented seafood in Indonesia were isolated and characterized. Viable cell counts were 10(4) to 10(6) cfu/g on MRS medium. All the isolates were catalase-negative, gram-positive cocci and were able to grow at 15% NaCl. Numerical phenotypic analysis showed that the isolates clustered into one group. However, they could be classified into two types: the Tetragenococcus halophilus group and the T. muriaticus group as revealed by a restriction fragment length polymorphism (RFLP) analysis and sequencing of the 16S rRNA gene. This study is the first to show that both species of Tetragenococcus are distributed in Indonesian fermented foods.     

Kinetic growth parameters of different amylolytic and non-amylolytic Lactobacillus strains under various salt and pH conditions

Four Lactobacillus species were studied for their ability to grow at high NaCl concentrations and different initial pH values. Lactobacillus plantarum 541 and A6 could ferment glucose and produce lactic acid in the presence of 8% salt in the medium. For strain 541, the specific rate of lactate production (q(lac)) and the yield of lactic acid relative to substrate (Y(p/s)) remained constant, whereas the yield of biomass relative to substrate (Y(x/s)) decreased up to 6% salt. In contrast, for strain A6, Y(p/s) decreased up to 6% salt whereas Y(x/s) did not vary markedly. Combined effects of salt and pH studied through a factorial design did not show significant interaction between salt and pH. The pH was the dominant factor in glucose fermentation for both the strains. Considering overall performance, 4% salt and pH between 6.0 and 6.6 can be taken as appropriate conditions, for the use of both strains as starters in processes where higher salt concentrations are required.     

Growth of Halotolerant Food Spoiling Yeast Debaryomyces nepalensis NCYC 3413 Under the Influence of pH and Salt

Debaryomyces nepalensis, a halotolerant food-spoiling yeast could grow in complex (YEPD) medium at different pHs ranging between 3.0 and 11.0 in the absence of salt and at pH 3.0–9.0 in the presence of different concentrations of NaCl and KCl. The specific growth rate of D. nepalensis was not affected by the initial pH of the medium in the absence of salts, whereas it was affected in the presence of salts. At 2 M NaCl and KCl, the organism exhibited a synergistic effect on pH and salt stress, which was unique in the Debaryomyces species. Irrespective of the initial pH and salt, the intracellular pH of D. nepalensis was ~7.0. Significant organic acid was produced at neutral and alkaline pH and organic acid production increased with the increase in pH and salt. Very specific organic acids are produced in the presence of NaCl and KCl. Our observation would contribute to a better understanding of the physiological phenomenon of halotolerance in D. nepalensis.     

High production system of the antibacterial peptide PLG-1

Propionibacterium thoenii P-127 produces and releases to the growth medium antibacterial agents that can be used as natural preservatives. The concentrations of these antibacterial agents in the growth medium are very low, and their activity can be detected only in concentrated medium, even in a bioreactor. A simple and efficient system to produce propionicin PLG-1 without the use of a bioreactor was investigated. Fermentation in screw-cap bottles without shaking produced antibacterial activity similar to that of fermentation in plates, but in a shorter time. Sodium lactate medium (NaLa) was found to be the most supportive for PLG-1 production compared to lactic acid bacteria media such as M-17 or beet molasses/corn. The initial concentration of the carbon source, sodium lactate, agar concentration, and the initial pH of the medium affected the synthesis of PLG-1. Additions of NaCl up to 1% showed no effect on the antibacterial agent production. The optimal conditions for production of the antibacterial agent were fermentation for 9 days in screw-cap bottles in modified NaLa medium (M-NaLa) containing 1% yeast extract, 1% tryptic soy broth, 0.9% lactic acid, and 0.6% agar, adjusted to pH of 9.     

Growth, maintenance and fermentation pattern of the salt-tolerant lactic acid bacterium Tetragenococcus halophila in anaerobic glucose limited retention cultures

The homofermentative lactic acid bacterium Tetragenococcus halophila showed mixed acid fermentation at low growth-rates under glucose limiting conditions and in the presence of 10% NaCl. Maximum growth yields in fermentors with cell retention were not affected by pH, but maintenance requirement was at pH 5.2 four times higher than at pH 7.0. Despite the high salt-concentration of the medium, maintenance requirements were low compared to other lactic acid bacteria. The possible causes of the observed differences in maintenance requirements are discussed.     

Effect of NaCl and KCl on fate and growth/no growth interfaces of Listeria monocytogenes Scott A at different pH and nisin concentrations

AIMS: The fate of Listeria monocytogenes Scott A, was studied in broth, at different a(w)s (by adding NaCl or KCl from 0.0 to 1.4 mol l(-1)), pHs (from 4.0 to 7.3 by adding lactic acid), and nisin concentrations (from 0 to 100 IU ml(-1)). METHODS AND RESULTS: Increasing salt and nisin concentrations and decreasing pH resulted in lower growth rates and extended lag phases. At pH 4.5 no growth was observed while in presence of nisin and/or 1 mol l(-1) salts of both kinds, L. monocytogenes Scott A was inactivated. Equal-molar concentrations of NaCl or KCl (similar a(w)), exerted similar effects against L. monocytogenes in terms of lag phase duration, growth or death rate. The growth boundaries of L. monocytogenes Scott A at 5 degrees C were also estimated by growth/no growth turbidity data, modeled by logistic polynomial regression. The concordance of logistic models, were 99.6 and 99.8% for NaCl and KCl, respectively. CONCLUSIONS: The growth interfaces derived by both NaCl and KCl models were almost identical. Hence, NaCl can be replaced by KCl without risking the microbiological safety of the product. Increasing nisin concentrations markedly affected the interface resulting in a more inhibitory environment for L. monocytogenes Scott A. Low to medium salt concentrations (0.3-0.7 mol l(-1) of either NaCl or KCl) provided a protective effect against inhibition of L. monocytogenes Scott A by nisin. SIGNIFICANCE AND IMPACT OF THE STUDY: Modelling the growth boundaries not only contributes to the development of safer food by providing useful data, but can also be used to study interactions between factors affecting initiation of growth of pathogenic micro-organisms.     

Optimization of culture conditions for the production of haloalkaliphilic thermostable protease from an extremely halophilic archaeon Halogeometricum sp. TSS101

AIMS: Isolation and screening of extreme halophilic archaeon producing extracellular haloalkaliphilic protease and optimization of culture conditions for its maximum production. METHODS AND RESULTS: Halogeometricum sp. TSS101 was isolated from salt samples and screened for the secretion of protease on gelatin and casein plates containing 20% NaCl. The archaeon was grown aerobically in a 250 ml flask containing 50 ml of (w/v) NaCl 20%; MgCl(2) 1%; KCl 0.5%; trisodium citrate 0.3%; and peptone 1%; pH 7.2 at 40 degrees C on rotary shaker. The production of enzyme was investigated at various pH, temperatures, NaCl concentrations, metal ions and different carbon and nitrogen sources. The partially purified protease had activity in a broad pH range (7.0-10.0) with optimum activity at pH 10.0 and a temperature (60 degrees C). The enzyme was thermostable and retained 70% initial activity at 80 degrees C. Maximum protease production occurred at 40 degrees C in a medium containing 20% NaCl (w/v) and 1% skim milk powder after 84 h in shaking culture. Enzyme secretion was observed at a broad pH range of 7.0-10.0. Addition of CaCl(2) (200 mmol) to the culture medium enhanced the production of protease. Protein rich flours proved to be cheap and good alternative source for enzyme production. Different osmolytes were tested for the growth and production of haloalkaliphilc protease and found that betaine and glycerol enhanced growth without secretion of the protease. Immobilization studies showed that whole cells immobilized in 2% alginate beads were stable up to 10 batches and able to secrete the protease, which attained maximum production within 60 h under shaking conditions. CONCLUSIONS: Halogeometricum sp. TSS101 secreted an extracellular haloalkaliphilic and thermostable protease. The optimum conditions required for maximum production are 20% NaCl, 1% skim milk powder and temperature at 40 degrees C. Addition of CaCl(2) (200 mmol) enhanced the enzyme production. Immobilization of whole cells in absence of NaCl proved to be useful for continuous production of haloalkaliphilic protease. SIGNIFICANCE AND IMPACT OF THE STudy: The low cost protein rich flours were used as an alternative carbon and nitrogen sources for enzyme production. Immobilization of halophilic cells in alginate beads can be used in continuous production of halophilic enzyme. The halophilic and thermostable protease from Halogeometricum sp. TSS101 is good source for industrial applications and can be a suitable source for preparation of fish sauce.     

Microflora of the aerobic preservation of directly brined green olives from Hojiblanca cultivar

New procedures for the preservation stage of ripe olives from Hojiblanca cultivar were studied. An aerobic fermentative process was used with initial pH correction (0.3% acetic acid) and various NaCl concentrations: 6, 3 and 0% (w/v) in tap water. Treatments were carried out at industrial level and the spontaneous changes monitored. At initial salt concentrations of 6 and 3% (w/v) NaCl, pH rose progressively, reaching 4.3 at equilibrium maintaining during this period a constant free lactic acidity of around 0.4% (w/v). When the initial solution was tap waste, however, the pH decreased rapidly to stabilize at about 3.7, and lactic acidity increased continuously to reach values over 1% (w/v) at the end of the preservation process. In all treatments aeration effectively purged the carbon dioxide from the preservation brines, preventing shrivelling of olives. The microbial growth was strongly influenced by the initial NaCl concentration. At 6 and 3%, only yeasts grew, the most abundant being Pichia membranaefaciens, P. vini, P. fermentans and Hansenula polymorpha. However, when there was no NaCl, lactic acid bacteria colonized the solution. Lactobacillus plantarum and Pediococcus inopinatus were the only species found. In this case there was a co-existence between yeasts and lactic acid bacteria. As the treatment that supported lactic acid bacteria achieved the best final pH and acidity for olive stability, it may help to overcome the obstacles to a lactic fermentative process during the preservation stage of ripe olives from the Hojiblanca cultivar.     

Direct production of L+-lactic acid from starch and food wastes using Lactobacillus manihotivorans LMG18011

This study describes several essential factors for direct and effective lactic acid production from food wastes by Lactobacillus manihotivorans LMG18011, and optimum conditions for simultaneous saccharification and fermentation using soluble starch and food wastes as substrates. The productivity was found to be affected by three factors: (1) initial pH, which influenced amylase production for saccharification of starch, (2) culture pH control which influenced selective production of L(+)-lactic acid, and (3) manganese concentration in medium which improved in production rate and yield of lactic acid. The optimum initial pH was 5.0-5.5, and the fermentation pH for the direct and effective fermentation from starchy substrate was 5.0 based on the yield of L(+)-lactic acid. Under these conditions, 19.5 g L(+)-lactic acid was produced from 200 g food wastes by L. manihotivorans LMG18011. Furthermore, the addition of manganese stimulated the direct fermentation significantly, and enabled complete bioconversion within 100 h.     

Effect of osmotic, alkaline, acid or thermal stresses on the growth and inhibition of Listeria monocytogenes

Five strains of Listeria monocytogenes (a, b, c, d and e) isolated from industrial plants have been subjected to different osmotic, alkaline, acid or thermal stresses. The effects of these treatments on lag-phase (L) and growth rate (mu) of cells in mid-log phase have been followed using an automated optical density monitoring system. Increasing the osmotic pressure by the addition of different amounts of NaCl increased the lag phase and decreased the growth rate. The same phenomena were observed after decreasing the pH of the medium to 5.8, 5.6 or 5.4 by addition of acetic, lactic or hydrochloric acids. The inhibitory effect was: acetic acid > lactic acid > hydrochloric acid. The addition of NaOH to attain pH values of 9.5, 10.0, 10.5 or 11.0 in the medium produced a dramatic increase of the lag phase at pH 10.5 and 11. Growth rates were also decreased while the maximal population increased with high pH values. These effects varied according to strains. Strains d and e were the most resistant to acidic and alkaline stresses, and e was the most affected by the addition of NaCl. A cold shock of 30 min at 0 degree C had limited effects on growth parameters. On the other hand, hyperthermal shocks (55 or 63 degrees C, 30 min) led to similar increased lag phases and to significant increases of the maximal population in all five strains.     

Evaluation of clastogenicity of formic acid, acetic acid and lactic acid on cultured mammalian cells

Using Chinese hamster ovary K1 cells, chromosomal aberration tests were carried out with formic acid, acetic acid and lactic acid, and the relationship between the pH of the medium and the clastogenic activity was examined. The medium used was Ham's F12 supplemented with 17 mM NaHCO3 and 10% fetal calf serum. All of these acids induced chromosomal aberrations at the initial pH of ca. 6.0 or below (about 10-14 mM of each acid) both with and without S9 mix. Exposure of cells to about pH 5.7 or below (about 12-16 mM of each acid) was found to be toxic. When the culture medium was first acidified with each of these acids and then neutralized to pH 6.4 or pH 7.2 with NaOH, no clastogenic activity was observed. Using F12 medium supplemented with 34 mM NaHCO3 as a buffer, no clastogenic activity was observed at doses up to 25 mM of these acids (initial pH 5.8-6.0). However, it was found that about 10% of the cells had aberrations at pH 5.7 or below (27.5-32.5 mM of each acid). Furthermore, when 30 mM HEPES was used as a buffer, chromosomal aberrations were not induced at doses up to 20 mM formic acid and acetic acid (initial pH 7.0-7.1), and at doses up to 30 mM lactic acid (initial pH 6.6). In the initial pH range of 6.4-6.7 (25-32.5 mM of each acid), chromosomal aberrations were observed. The above results show that these acids themselves are non-clastogenic, and the pseudo-positive reactions attributable to non-physiological pH could be eliminated by either neutralization of the treatment medium or enhancement of the buffering ability.     

A medium for commercial production of the halophilic Micrococcus nuclease.

A simple synthetic medium (glutamate-sucrose medium) was devised for production, during growth in shaken flasks, of extracellular halophilic nuclease (nuclease H) by a moderate halophile, Micrococcus varians subsp. halophilus. A simple medium consisting of 0.7% ammonium sulfate, 1.0% glucose, minerals, three vitamins, and 2 M NaCl gave good growth and excellent production of nuclease H in a jar fermentor when the pH was adjusted to 7.5 to 8.0 during cultivation.     

Relationship between pH and medium dissolved solids in terms of growth and metabolism of lactobacilli and Saccharomyces cerevisiae during ethanol production

The specific growth rates of four species of lactobacilli decreased linearly with increases in the concentration of dissolved solids (sugars) in liquid growth medium. This was most likely due to the osmotic stress exerted by the sugars on the bacteria. The reduction in growth rates corresponded to decreased lactic acid production. Medium pH was another factor studied. As the medium pH decreased from 5.5 to 4.0, there was a reduction in the specific growth rate of lactobacilli and a corresponding decrease in the lactic acid produced. In contrast, medium pH did not have any significant effect on the specific growth rate of yeast at any particular concentration of dissolved solids in the medium. However, medium pH had a significant (P < 0.001) effect on ethanol production. A medium pH of 5.5 resulted in maximal ethanol production in all media with different concentrations of dissolved solids. When the data were analyzed as a 4 (pH levels) by 4 (concentrations of dissolved solids) factorial experiment, there was no synergistic effect (P > 0.2923) observed between pH of the medium and concentration of dissolved solids of the medium in reducing bacterial growth and metabolism. The data suggest that reduction of initial medium pH to 4.0 for the control of lactobacilli during ethanol production is not a good practice as there is a reduction (P < 0.001) in the ethanol produced by the yeast at pH 4.0. Setting the mash (medium) with > or =30% (wt/vol) dissolved solids at a pH of 5.0 to 5.5 will minimize the effects of bacterial contamination and maximize ethanol production by yeast.     

Relationship between pH and Medium Dissolved Solids in Terms of Growth and Metabolism of Lactobacilli and Saccharomyces cerevisiae during Ethanol Production

The specific growth rates of four species of lactobacilli decreased linearly with increases in the concentration of dissolved solids (sugars) in liquid growth medium. This was most likely due to the osmotic stress exerted by the sugars on the bacteria. The reduction in growth rates corresponded to decreased lactic acid production. Medium pH was another factor studied. As the medium pH decreased from 5.5 to 4.0, there was a reduction in the specific growth rate of lactobacilli and a corresponding decrease in the lactic acid produced. In contrast, medium pH did not have any significant effect on the specific growth rate of yeast at any particular concentration of dissolved solids in the medium. However, medium pH had a significant (P < 0.001) effect on ethanol production. A medium pH of 5.5 resulted in maximal ethanol production in all media with different concentrations of dissolved solids. When the data were analyzed as a 4 (pH levels) by 4 (concentrations of dissolved solids) factorial experiment, there was no synergistic effect (P > 0.2923) observed between pH of the medium and concentration of dissolved solids of the medium in reducing bacterial growth and metabolism. The data suggest that reduction of initial medium pH to 4.0 for the control of lactobacilli during ethanol production is not a good practice as there is a reduction (P < 0.001) in the ethanol produced by the yeast at pH 4.0. Setting the mash (medium) with ≥30% (wt/vol) dissolved solids at a pH of 5.0 to 5.5 will minimize the effects of bacterial contamination and maximize ethanol production by yeast.     

In vivo and in vitro complementation study comparing the function of DnaK chaperone systems from halophilic lactic acid bacterium Tetragenococcus halophilus and Escherichia coli

In this study, we characterized the DnaK chaperone system from Tetragenococcus halophilus, a halophilic lactic acid bacterium. An in vivo complementation test showed that under heat stress conditions, T. halophilus DnaK did not rescue the growth of the Escherichia coli dnaK deletion mutant, whereas T. halophilus DnaJ and GrpE complemented the corresponding mutations of E. coli. Purified T. halophilus DnaK showed intrinsic weak ATPase activity and holding chaperone activity in vitro, but T. halophilus DnaK did not cooperate with the purified DnaJ and GrpE from either T. halophilus or E. coli in ATP hydrolysis or luciferase-refolding reactions under the conditions tested. E. coli DnaK, however, cross-reacted with those from both bacteria. This difference in the cooperation with DnaJ and GrpE appears to result in an inability of T. halophilus DnaK to replace the in vivo function of the DnaK chaperone of E. coli.     

Lipolytic activity of Antarctic cold-adapted marine bacteria (Terra Nova Bay, Ross Sea)

AIMS: The aim of this study was to investigate the lipolytic activity of cold-adapted Antarctic marine bacteria and, furthermore, the combined effect of some environmental factors on this enzymatic process. METHODS AND RESULTS: Strains were assayed for lipolytic activity on a basal medium amended with seven individual fatty acid esters. A significant activity was observed for 148 isolates (95.5% of the total screened). The interactive effect of pH, temperature and NaCl concentration on the substrates was tested for six representative isolates, identified as Pseudoalteromonas, Psychrobacter and Vibrio. Differences between strains according to NaCl and pH tolerances were observed. Only one strain degraded the substrate more efficiently at 4 degrees C than at 15 degrees C. CONCLUSIONS: Our findings demonstrate that the lipolytic activity of Antarctic marine bacteria is rather variable, depending on culture conditions, and occurs in a wide range of salt concentration and pH. SIGNIFICANCE AND IMPACT OF THE STUDY: Isolation and characterization of bacteria that are able to efficiently remove lipids at low temperatures will provide insight into the possibility to use cold-adapted bacteria as a source of exploitable enzymes. Moreover, research on the interactive effects of salt concentration, pH and temperature will be useful to understand the true enzyme potentialities for industrial applications.     

Growth of, and aflatoxin production by Aspergillus parasiticus when in the presence of either Lactococcus lactis or lactic acid and at different initial pH values

L uchese , R.H. & H arrigan , W.F. 1990. Growth of, and aflatoxin production by Aspergillus parasiticus when in the presence of either Lactococcus lactis or lactic acid and at different initial pH values. Journal of Applied Bacteriology 69 , 512–519.
Aspergillus parasiticus was grown in a modified Lab-Lemco tryptone broth both as a single culture and in association with Lactococcus lactis . Total aflatoxin (B1 + G1) production was higher in the mixed cultures. This stimulation persisted when different batches of media, inoculation procedures and makes of ingredients were used. Aflatoxin yields increased in media with an initial pH of 4.2 compared with a pH close to neutrality. Hydrochloric and/or lactic acid had little effect. The substitution of half the carbon content of the medium by lactate resulted in stimulation or reduction on aflatoxin production when the initial pH was 4.2 or 6.8, respectively.     

Screening of lactic starter from Tunisian fermented vegetables and application for the improvement of caper (Capparis spinosa) fermentation through an experimental factorial design

This study aims at designing a lactic starter for caper fermentation isolated from Tunisian fermented vegetables to improve the process and produce consistent and high-quality product. In this study, the lactic starter was isolated by exploring the lactic acid bacteria (LAB) of Tunisian artisanal fermented vegetables. Identification was carried out by partial 16S rRNA gene sequencing. Screening was based on salt tolerance and antagonistic activities against Escherichia coli ATCC 10536 and Enterococcus faecalis ATCC 10541. Caper fermentation was optimized through a full factorial experimental design (23), by exploring three factors: starter inoculum size, NaCl concentration, and acetate content. Differences in pH values, Total aerobic mesophilic bacteria and LAB counts between the beginning and end of fermentation are selected as responses and corresponding regression coefficients were calculated. The lactic microbiota is mainly represented by Lactobacillus plantarum group. Based on salt tolerance and antimicrobial activity, the strain Lactobacillus plantarum F3 was selected as starter for caper fermentation. The effect of NaCl concentration, acetate content, and inoculum size on acidity, total aerobic mesophilic bacteria count, and LAB count after 1 week and 1 month of caper fermentation was studied. Depending on the fermentation time, either 1 week or 1 month, the initial conditions should comprise 0% acetate, 108 CFU/mL inoculum, and 5% NaCl for 1 week against 5% acetate, 107 CFU/mL inoculum, and 10% NaCl for 1 month lasting caper fermentation. A protocol for caper fermentation was set up ensuring hygienic quality and LAB viability. Lb. plantarum F3 was selected as lactic starter for caper fermentation, and initial fermentation conditions were optimized through a full factorial design. This work has shown loss in LAB viability after 1 week of fermentation. Based on results obtained, an optimized fermentation protocol was set up. This protocol ensures LAB survival and high hygienic quality of the product.