The effect of different attachment systems with implant‐retained overdentures on maximum bite force and EMG

doi: 10.1111/j.1741‐2358.2010.00389.x The effect of different attachment systems with implant‐retained overdentures on maximum bite force and EMG Objective: To compare the effect of different attachment systems with implant‐retained overdentures on maximum bite force and muscle activity using electromyography (EMG). Background: Denture retention and stability is of considerable interest in prosthetic dentistry. Materials and methods: Thirty‐five patients were examined: 15 edentulous patients treated with mandibular implant‐retained overdentures (MIRO) and maxillary dentures (MCD) (two implant‐ball attachment) (BC); 10 edentulous patients treated with MIRO and MCD (four implants‐bar attachments) (BRC); 10 patients with edentulous mandibular treated with MIRO and maxillary fixed partial dentures (MFPD) (two implant‐ball attachments) (BF). Before implant placement all patients received new dentures. After using these dentures for 3 months the maximum bite force and electrical activity of masseter muscle were measured. Two or four implants were then inserted into the intraforaminal region. After osseointegration periods, patients were treated with MIRO which duplicated their dentures and after three months the measurements were repeated. The data were collected and statistically analysed. Results: Muscle activity and chewing ability increased in the second period of measurements. Also chewing time was significantly decreased at the first measurements. The highest muscle activity was observed in the group of patients treated with group BF. Conclusion: The EMG values of the masseter muscle significantly increased when an implant attachments was used in the overdenture.     

Outcome of implant-supported overdenture treatment--a survey of 58 patients

Gerondontology 2012; doi: 10.1111/j.1741‐2358.2011.00524.x
Outcome of implant‐supported overdenture treatment – a survey of 58 patients Objective: The aim of this follow‐up study was to evaluate the long‐term outcome of implant‐supported or implant‐retained mandibular overdenture treatment. Material and methods: Altogether 112 patients treated with implant‐supported overdentures between 1985 and 2004 were invited to the follow‐up and 58 attended the clinical examination. The total amount of implants examined and still in use was 197. The average number of implants installed was three (range 2–4), and the mean length of the implants was 12 mm (range 8–21 mm). There were altogether 48 overdentures with a bar connection and 10 with a ball connection. Results: The most frequent prosthetic complications were technical: loosening of the retentive mechanism (39.7%) and breakage of the matrices (5.2%). The most common peri‐implant soft‐tissue findings were bleeding and slight hyperplasia. The implant‐supported overdentures of 19 patients (32.8%) had been renewed, while 39 patients (67.2%) still used their original overdentures, of which the oldest was 20 years old. Conclusion: The results of this long‐term follow‐up study show that the outcome of implant‐supported mandibular overdenture treatment was excellent. The patients were satisfied with the treatment, regardless of the attachment type used. Removable overdentures are more easy to clean and can be cleaned outside the patient’s mouth, whereas fixed‐implant full‐arch dentures in the edentulous mandible require much more time‐consuming hygiene. This kind of overdenture treatment is suitable also in the elderly, even though their ability to practice appropriate oral hygiene might be decreased.     

Finite element analysis of different loading conditions for implant-supported overdentures supported by conventional or mini implants

The effect of implants’ number on overdenture stability and stress distribution in edentulous mandible, implants and overdenture was numerically investigated for implant-supported overdentures. Three models were constructed. Overdentures were connected to implants by means of ball head abutments and rubber ring. In model 1, the overdenture was retained by two conventional implants; in model 2, by four conventional implants; and in model 3, by five mini implants. The overdenture was subjected to a symmetrical load at an angle of 20 degrees to the overdenture at the canine regions and vertically at the first molars. Four different loading conditions with two total forces (120, 300 N) were considered for the numerical analysis. The overdenture displacement was about 2.2 times higher when five mini implants were used rather than four conventional implants. The lowest stress in bone bed was observed with four conventional implants. Stresses in bone were reduced by 61% in model 2 and by 6% in model 3 in comparison to model 1. The highest stress was observed with five mini implants. Stresses in implants were reduced by 76% in model 2 and 89% increased in model 3 compared to model 1. The highest implant displacement was observed with five mini implants. Implant displacements were reduced by 29% in model 2, and increased by 273% in model 3 compared to model 1. Conventional implants proved better stability for overdenture than mini implants. Regardless the type and number of implants, the stress within the bone and implants are below the critical limits.     

The effect of attachment type and implant number on satisfaction and quality of life of mandibular implant-retained overdenture wearers

doi: 10.1111/j.1741‐2358.2011.00531.x The effect of attachment type and implant number on satisfaction and quality of life of mandibular implant‐retained overdenture wearers Objective: The aim of this study was to compare the quality of life and patient satisfaction outcomes of two attachment systems in mandibular overdentures with different numbers of supporting implants. Materials and methods: Sixty‐two edentulous patients with either splinted or single attachments in mandibular implant overdentures with different numbers of supporting interforaminal implants were investigated for patient satisfaction and quality of life in this retrospective study. Comparisons between groups were perceived by the Mann–Whitney U test. Relations among the parameters were investigated by Spearman’s rho correlation analysis. The results were evaluated statistically at a significance level of p < 0.05. Results: No statistically significant association is found between visual analogue scales scores and attachment type as well as implant number (p > 0.05), whereas Oral Health Impact Profile (OHIP)‐14 total scores for patients with 4‐implant‐supported bars were significantly lower than all the other attachment types (p < 0.05). Additionally, a negative (rate = 32.2%), statistically significant association between period of edentulism and total OHIP‐14 scores was detected (p < 0.05). Conclusions: A mandibular implant‐retained overdenture supported with four implants and bar attachments shows the highest ‘quality of life’ score and patient satisfaction is not influenced by the number of implants or attachment type.     

Resonance frequency analysis of overdenture retainer implants with immediate loading

doi: 10.1111/j.1741‐2358.2011.00488.x
Resonance frequency analysis of overdenture retainer implants with immediate loading Objective: To evaluate 16 patients of both sexes with lower overdenture and upper complete dentures, by analysing the resonance frequency of the initial and late stability of implants used to retain the overdenture under immediate loading. Background: Oral rehabilitation treatment with complete dentures using implants has been increasingly more common among the specialists in the oral rehabilitation area. This is an alternative for obtaining retention and stability in treatments involving conventional complete dentures, where two implants are enough to retain the overdenture satisfactorily. Materials and methods: The Osstell? Mentor device was used for the analysis in the initial period (primary stability), 3 and 15 months after the installation of the lower overdenture (secondary stability). The statistical analysis was performed with the repeated measures model (p < 0.01). Results: The implant stability quotients were observed to increase after 15 months of the rehabilitating treatment. Conclusion: The use of overdentures over two lower implants should become the treatment of choice for individuals who have a fully edentulous mandible.     

Elders with implant overdentures: a 22-year clinical report

doi: 10.1111/j.1741‐2358.2012.00628.x Elders with implant overdentures: a 22‐year clinical report Objective: To report on the long‐term survival and prosthodontic maintenance of two edentulous adults with mandibular overdentures supported by hydroxyapatite (HA)‐coated implants. Background: Mandibular implant overdentures are a successful treatment option with positive impact on the quality of life of elderly edentulous adults. Long‐term survival of the implants requires continued rigorous prosthodontic maintenance. Clinical report: Two elderly edentulous adults with mandibular overdentures supported by 2 HA‐coated implants were presented for prosthodontic rehabilitation after 22 years of placement. The implants were osseo‐integrated and surviving at presentation based on accepted criteria. The mandibular implant overdentures suffered recurrent loss of retention and stability. Prosthodontic treatment involving the replacement of defective attachment systems and construction of new sets of mandibular implant overdentures opposing complete maxillary dentures is presented. Conclusion: The long‐term survival of mandibular 2‐implant overdentures requires continued prosthodontic maintenance. A conservative approach in the rehabilitation of two older edentulous adults with mandibular 2‐implant overdentures was described including proper selection of attachment systems.     

Clinical feasibility of mandibular implant overdenture retainers submitted to immediate load

Gerodontology 2010; doi: 10.1111/j.1741‐2358.2010.00374.x
Clinical feasibility of mandibular implant overdenture retainers submitted to immediate load Introduction: Millions of people around the world do not have access to the benefits of osseointegration. Treatments involving oral rehabilitation with overdentures have been widely used by specialists in the oral medicine field. This is an alternative therapy for retention and stability achievement in total prosthesis with conventional treatment, and two implants are enough to establish a satisfactory overdenture. Objective: The objectives of the study were to evaluate 16 patients of both sexes, with an average age of 47.4 ± 4 years, using electromyographic analysis of masseter and temporal muscles and analyse the increase of incisive and molar maximal bite force with their existing complete dentures and following mandibular implant overdenture therapy to assess the benefits of this treatment. Materials and methods: For these tests, the Myosystem‐BR1 electromyograph and the IDDK Kratos dynamometer were used. Statistical analysis was performed using the repeated measures test (SPSS 17.0). Results: A decrease in electromyographic activity during the rest, lateral and protrusion movements and increase of the maximal incisive and molar bite force after 15 months with a mandibular implant overdenture was observed. Conclusion: All the patients in this study reported a considerable improvement in the masticatory function and prostheses stability following treatment. It is possible to propose that the use of mandibular implants overdenture should become the selected treatment for totally edentulous patients to facilitate oral function and quality of life.     

Comparison between complete denture and implant‐retained overdenture: effect of different mucosa thickness and resiliency on stress distribution

Background: The effect of different mucosa characteristics on stress distribution of complete dentures and overdentures remains unknown. Objective: The aim of this study was to evaluate the effect of different mucosa thickness and resiliency on the stress distribution of complete dentures and implant‐retained overdentures using a two‐dimensional finite element analysis. Material and methods: Representative models of the edentulous mandible were constructed on AutoCAD software according to the groups’ characteristics. In group CD, a model of the edentulous mandible supporting a complete denture was obtained while in group IO, a model of edentulous mandible supporting an overdenture over two unsplinted implants with an o’ ring system was constructed. In each group, mucosa assumed three characteristics of thickness (1, 3 and 5 mm) corresponding to the resiliencies hard, resilient and soft respectively. Evaluation was performed on Ansys software with 100N vertical load applied on central incisor teeth. The principal stress was used as analysis criteria. Results: Group IO showed higher stress values than group CD regardless of mucosal thickness and resiliency. Stress decreased at the supporting tissues in both groups as the thickness and resiliency of mucosa increased. In relation to the supporting tissues, cortical bone showed the highest stress values. Conclusion: It was concluded that the use of an attachment system increases stress values and the thickness and resiliency of mucosa influence more on these values.     

The influence of mandibular implant-retained overdentures in masticatory efficiency

doi: 10.1111/j.1741‐2358.2011.00539.x The influence of mandibular implant‐retained overdentures in masticatory efficiency Objective: To evaluate the masticatory efficiency of patients rehabilitated with conventional dentures (CDs) or implant‐retained mandibular overdentures. Background: Despite the evident benefits of implants on mastication as assessed by subjective patient‐based outcomes, the extent of implant overdenture treatment effect on food comminution is not well established. Materials and methods: A randomised clinical trial was carried out with 29 completely edentulous patients divided into two groups. The first group was rehabilitated with a mandibular overdenture retained by two splinted implants with bar‐clip system, while the second group was rehabilitated with a mandibular CD. Both groups also were rehabilitated with maxillary CDs. Masticatory efficiency and patient satisfaction were assessed 3 months after denture insertion. Masticatory efficiency was evaluated through the colorimetric method with the beads as the artificial test‐food. Comparisons for masticatory efficiency and patient satisfaction were performed using Student’s t‐test (α = 0.05). Results: No significant statistical difference was found for masticatory efficiency (p = 0.198). Patient overall satisfaction was significantly higher for the mandibular overdenture (p < 0.001). In addition, mandibular overdenture patients were significantly more satisfied with chewing experience (p < 0.05) and retention of the lower denture (p < 0.005). Conclusion: The results of this study suggest that mandibular overdenture significantly improves chewing experience, although limited effect on masticatory efficiency has been observed.     

The influence of implant number and attachment type on maximum bite force of mandibular overdentures: a retrospective study

doi: 10.1111/j.1741‐2358.2010.00421.x
The influence of implant number and attachment type on maximum bite force of mandibular overdentures: a retrospective study Aim: Assessment of the influence of such factors as attachment type, number of implants, gender and age of patients on maximum bite force (MBF). Material and methods: Sixty‐two edentulous patients (32 females, 30 males; aged 64.03 ± 10.07 years, range 42–90 years) with mandibular implant overdentures with various attachment types were included in the study and their MBFs were recorded. The results were evaluated statistically at a significance level of p < 0.05. Results: The MBF in male patients was found to be statistically significantly (p < 0.05) higher than in female patients. No statistically significant differences (p > 0.05) were found with respect to age groups, attachment types and number of implants supporting the mandibular overdentures. Conclusion: Within the limitations of this study, it is concluded that independent of the number applied, dental implants increase MBF in edentulous patients. While males show higher bite force, patient age and attachment type seem not to play an important role.     

Accelerated rehabilitation of an edentulous patient with an implant retained dental prosthesis: a case report

This case report details the successful rehabilitation of an edentulous patient using a complete upper prosthesis and a lower implant retained overdenture. The provision of care was split between a specialist centre and a primary care setting. This approach reduced inconvenience to the patient. Modern surgical and prosthodontic techniques also reduced the total delivery time. After initial consultation a new set of complete dentures was prescribed with changes in design to the originals. The patient was also planned for placement of two mandibular implants to stabilise and retain the mandibular denture. The first line of treatment involved provision of a new set of dentures constructed by the patient's general dental practitioner. Dental implants were then placed in a specialist centre and the patient returned to the dental practice for attachment of the lower denture to the dental implants. The benefits and success of mandibular implant retained dentures are well documented. With delivery of the overdenture, the patient reported increased satisfaction with his prostheses which allowed him to eat a greater range of foods and enabled him to feel confident when speaking and socialising.     

Implant overdentures for edentulous elders: study of patient preference

Background: Studies show that elders wearing implant overdentures have improved nutrition and quality of life. However, upfront costs of this therapy are high, and the income of elderly edentulous populations is low. Objectives: This study was designed (i) to measure the preferences of edentulous patients for mandibular two‐implant overdentures using Willingness‐To‐Pay (WTP) and Willingness‐To‐Accept (WTA), (ii) to assess the effect of long‐term financing on WTP and (iii) to assess the desired role of health care plans in financing dental prostheses. Methods: Edentulous elders (68–79 years; n = 36) wearing maxillary dentures and either a mandibular conventional denture (CD, n = 13) or a two‐implant overdenture with ball attachments (IOD, n = 23) participated in this study. All had received their prostheses 2 years previously, as part of a randomised clinical trial. A three‐part questionnaire was completed during a 20‐min interview with a trained researcher. Results: Forty‐six per cent (6/13) of the CD wearers and 70% (16/23) of the IOD wearers were willing to pay three times more than the current cost of conventional dentures for implant prostheses. These percentages were increased to 77% (CD) and 96% (IOD) if participants could pay for implant overdentures in monthly instalments. Eighty‐six per cent (31/36) of all participants in both groups (21/23 IOD; 10/13 CD) thought that the government should cover at least some of the cost of implant overdentures. Conclusions: This study shows that, the majority of elderly edentate individuals who have not experienced mandibular two‐implant overdenture therapy are willing to pay the cost, particularly when payment can be made in monthly instalments.     

Biomechanical analysis and comparison of 12 dental implant systems using 3D finite element study

Finite element analysis plays an important role in dental implant design. The objective of this study was to show the effect of the overall geometry of dental implants on their biomechanics after implantation. In this study, 12 dental implants, with the same length, diameter and screw design, were simulated from different implant systems. Numerical model of right mandibular incisor bone segment was generated from CT data. The von-Mises stress distributions and the total deformation distributions under vertical/lateral load were compared for each implant by scores ranking method. The implants with cylindrical shapes had highest scores. Results indicated that cylindrical shape represented better geometry over taper implant. This study is helpful in choosing the optimal dental implant for clinical application and also contributes to individual implant design. Our study could also provide reference for choice and modification of dental implant in any other insertion sites and bone qualities.     

Should edentulous patients be constrained to removable complete dentures? The use of dental implants to improve the quality of life for edentulous patients

doi:10.1111/j.1741‐2358.2009.00294.x
Should edentulous patients be constrained to removable complete dentures? The use of dental implants to improve the quality of life for edentulous patients Background: Nowadays, there is some speculation among dental educators that the need for complete dentures will significantly decrease in the future and that training in their provision should be removed from the dental curriculum. Objective: To sensitise the reader to the functional shortcomings of complete denture therapy in the edentulous patient and present restorative options including implants to improve edentulous quality of life in these patients. Methods: Information retrieval followed a systematic approach using PubMed. English articles published from 1964 to 2008, in which the masticatory performance of patients with implant‐supported dentures was assessed by objective methods and compared with performance with conventional dentures, were included. Results: National epidemiological survey data suggested that the adult population in need of one or two complete dentures will increase from 35.4 million adults in 2000 to 37.9 million adults in 2020. Clinical studies have showed that the ratings of general satisfaction were significantly better in the patients treated with implant overdentures post‐delivery compared with the complete denture users. In addition, the implant group gave significantly higher ratings on comfort, stability and ability to chew. Furthermore, patients who received mandibular implant overdentures had significantly fewer oral health‐related quality of life problems than did the conventional group. Conclusion: Implant‐supported dentures including either complete overdentures or a hybrid prosthesis significantly improve the quality of life for edentulous patients compared with conventional removable complete dentures. Therefore, the contemporary dental practitioner should consider other options as well as conventional removable complete dentures to restore edentulous patients.     

The influence of implant number and abutment design on the biomechanical behaviour of bone for an implant-supported fixed prosthesis: a finite element study in the upper anterior region

It is always recommended to use more implants for supporting a prosthesis in the immediate loading condition than in the classical two-stage treatment procedure. By means of the finite element (FE) method, the influence of the number of implants used in immediately loaded fixed partial prosthesis (FPP) on the load distribution was investigated, considering the abutment geometry. Two 3D FE models were studied employing four implants to support a FPP in the premaxilla. One model was designed with straight abutments and the other with 20°-angled abutments. The results concerning implant displacements, stresses and strains were compared with those of two implant-supported FPPs, obtained in a previous study. A noticeable reduction in the determined biomechanical bone loading was observed with the use of more implants in supporting an immediately loaded prosthesis. This study confirms that the use of additional numbers of implants in an immediately loaded prosthesis is highly recommended.     

Influence of connection type on the biomechanical behavior of distal extension mandibular removable partial dentures supported by implants and natural teeth

Few studies are performed to evaluate the influence of connection type on the stress distribution of distal extension mandibular removable partial dentures (RPDs) supported by both implants and natural teeth. In this study, five three-dimensional finite element models were prepared to simulate mandibular bilateral partially edentulous arches. Four were RPDs supported by both implants and natural teeth, and the other one was RPDs supported only by natural teeth. The maximum equivalent (EQV) stress values of bone around implants, the abutments, and the mucosa displacements of the related supporting structures were measured. It was found that a non-rigid telescopic coping was more favorable to protect the implant than a rigid telescopic coping. Compared with other connection types, the easy resilient attachment (ERA) system seemed to be effective to associate implant without complications. However, the results obtained in the present study should be cautiously interpreted in the clinic.     

Radiographic changes in alveolar bone height on overdenture abutments: a longitudinal study

Objective: Stabilisation of partial dentures is an important part of prosthodontic treatment, particularly in patients with an excessive reduction in alveolar bone supporting their abutment teeth. In these cases, overdenture prostheses are one possible treatment choice. Background: The aim of this study was to evaluate the effects of overdentures on the condition of alveolar bone of the remaining teeth, and to evaluate the overdenture concept in the prosthetic treatment of partially edentulous patients. Materials and methods: The investigation was conducted on 22 patients during observation periods of 6 and 10 years. After preparation, all abutment teeth were provided with either amalgam restorations or gold copings. An overdenture in the lower jaw was fabricated for every patient. A special film holder was used to repeat the X‐ray procedure in every patient in the same manner. The radiographs were evaluated using the grid scale. The alveolar bone level of all remaining teeth was evaluated on dental films by measuring the distance between the root apex and coronal border of the alveolar bone. Results: A statistically significant difference (p < 0.01) was calculated 6 years after delivery stage between distal alveolar bone levels of experimental abutments under overdentures and the remaining teeth of the control group. Alveolar bone of abutment teeth was considerably preserved, particularly in seven patients observed 10 years after provision of their dentures. Conclusion: Within the limitation of this study, the validity of the overdenture treatment in partially edentulous patients is concluded. Good oral hygiene was crucial for the success of treatment with overdentures.     

Implant-supported palatal lift prosthesis in a patient with velopharyngeal incompetence: a case report

doi: 10.1111/j.1741‐2358.2011.00561.x Implant‐supported palatal lift prosthesis in a patient with velopharyngeal incompetence: a case report Objective: To describe the use of dental implants in the treatment of velopharyngeal incompetence. Background: Velopharyngeal incompetence is characterized by the inability to contract the tissues of the soft palate. The most common causes are neuromuscular problems resulting from concussion and degenerative conditions of the central nervous system. Materials and methods: The treatment using palatal lift prosthesis is well established in the literature; however, reports on the use of osseointegrated implants are scarce. Rehabilitation using only this type of fibromucosal support is difficult in edentulous patients, since the prosthesis has a palatal lift extension. Results: The implants provided retention and stability to the prosthesis, improving swallowing and speech and contributing to improve the patient’s quality of life. Conclusion: This article reports the rehabilitation of a patient with a totally edentulous maxilla with velopharyngeal incompetence using an implant‐retained palatal lift prosthesis.     

Oral health and oral implant status in edentulous patients with implant‐supported dental prostheses who are receiving long‐term nursing care

Aim: The aim of this study was to investigate oral health and oral implant status in a group of edentulous patients receiving long‐term residential or nursing care (LTC), all of whom had implant‐supported fixed or removable dental prostheses. Material and methods: A dental examination was performed on a total of 3310 patients receiving LTC and from this population 35 edentulous patients in whom dental implants had been placed formed the cohort for this study. All examinations were performed by a specialist in hospital dentistry and took place in the patients’ own home environment. Oral health was assessed by means of a protocol which evaluated oral hygiene status, possible oral mucosal inflammation and oral mucosal friction levels. Any problems with the implant‐supported prosthesis, implant mobility or other complications were also assessed. In addition, patients were asked about any oral symptoms and their usual oral hygiene procedures. Results: About half of the subjects (17/35) were registered as having no/mild inflammation with 18 of 35 having moderate/severe inflammation. Twelve of the 35 patients had good/acceptable oral hygiene and 23 of 35 had poor/bad oral hygiene. Twenty‐one of the 35 patients depended on help from the nursing personnel for their daily oral hygiene procedures. Obvious problems with food impaction were noted in 11 patients. A total of 229 implants had been placed in 43 jaws supporting 40 full arch‐fixed prostheses and three implant‐borne overdentures. There was no evidence of mobility or fractures of either the implants or the prostheses. Fifteen implants showed some exposed screw threads. Pus was exuding from one implant site and general peri‐implant gingival hyperplasia was noted in two patients. Twenty‐four patients were completely satisfied with the function and appearance of their implant‐supported prostheses. Two patients were totally dissatisfied. Conclusion: This study indicates that oral implant therapy can be considered as a treatment of choice in elderly patients, even if oral hygiene is sub‐optimal.     

An electronic device for accelerating bone formation in tissues surrounding a dental implant

A dental implant is a unique structure which can be used with a noninvasive method because it is inserted into the bone in part and extended extracorporally. This study presents an electronic device that is temporarily connected with the dental implant, and reports its effect on accelerating bone formation in the surrounding tissues in a canine mandibular model. A small sized and low power consumption biphasic electrical current (BEC) stimulator ASIC was developed and the surrounding tissue was exposed to continuous BEC stimulation for 7 days with the parameters of 20 µA/cm², 125 µs duration, and 100 pulses/s. After 2 (n = 5) and 5 weeks (n = 5), animals were sacrificed and the specimens were histomorphometrically evaluated. The newly formed bone area (BA) was 1.30 times (3 weeks, P < 0.05) and 1.35 times (5 weeks, P < 0.05) higher in the experimental group compared to the control group, respectively. Bone‐implant contact (BIC) in 3‐week specimens was 1.62 times (P < 0.05) greater in the experimental group, while there was no statistically significant difference in 5‐week specimens. Based on these results showing accelerated bone formation on and around the dental implant, it could be suggested that the latent time for osseointegration in dental implants can be reduced, and the success rate of implants in poor quality bone can be increased by using our device with BEC. Bioelectromagnetics 30:374–384, 2009. © 2009 Wiley‐Liss, Inc.