用激光扫描共聚焦显微镜观察雪松花粉和花粉管

为更直观地观察和显示花粉和花粉管中细胞结构及其细胞核的状态与行为。雪松花粉和花粉管经卡诺液固定,分别以埃氏苏木精、曙红、Hoechst 33243单染和曙红-Hoechst 33342双染后,用冬青油整体透明,在激光扫描共聚焦显微镜下观察。4种染色法观察效果不同;以曙红-Hoechst 33342双染的样品观察效果最佳,在紫外光激发下清晰地显示出细胞核,在488 nm激光激发下不仅能清晰看到花粉和花粉管壁结构,且能分辨管细胞、柄细胞及体细胞的结构特点和空间位置关系。建立了一种快速简便的适于在激光扫描共聚焦显微镜下观察花粉和花粉管中成员细胞结构及其细胞核的状态、行为的制片技术;激光扫描共聚焦显微镜具有独特的共轭成像装置、连续光学扫描、图像三维重组和多通道检测等功能,极好地展示了雪松花粉和花粉管的结构特点,相比于传统的光学显微镜和荧光显微镜,其观察到的图像更清晰、更直观、更具立体感。     

水稻双受精过程的共聚焦显微镜观察

(郑州大学离子束生物工程省重点实验室,郑州450052)摘要:首次利用核特异荧光染色与整体透明技术并利用激光扫描共聚焦显微镜(LSCM)对水稻双受精过程进行了观察。激光扫描共聚焦显微镜具有"组织与细胞CT"的功能,可以对整体组织进行扫描并构建三维结构。经荧光染色及透明处理后,在激光扫描共聚焦显微镜下经488nm激光激发,胚囊内各细胞的细胞核以及核仁发出明亮荧光,细胞核轮廓比较清晰,层次感强,并能清晰观察到胚囊内各细胞的结构特点和空间位置关系。不论是对开花前较小的成熟胚囊材料还是开花后较大的胚囊材料都取得了较好的观察效果。同传统的光学显微镜和荧光显微镜相比,其观察到的图像更清晰、更直观、更具立体感。     

激光扫描共聚焦显微镜在医学研究中的应用

激光扫描共聚焦显微镜（Confocal laser scanning microscope,CLSM）具有高分辨率、高灵敏度、三维重建、动态分析等优点,使图像更为精确清晰和数字化。该仪器现已广泛应用于细胞生物学、生理学、病理学、遗传学和药理学等研究领域中。本文简述了激光扫描共聚焦显微镜的结构、工作原理并归纳了其在医学各领域研究中的应用。     

激光扫描共聚焦显微镜观察细菌生物膜形成的方法学研究

目的:建立激光扫描共聚焦显微镜观察生物膜形成过程的方法,为进一步研究生物膜的形成机制奠定基础。方法:以临床分离金葡菌X428为研究对象,在盖玻片上形成生物膜,分别于接种后的4、8、12、16、24和48h取出玻片,采用免疫荧光技术标记多糖和细菌,激光扫描共聚焦显微镜(CLSM)观察生物膜形成情况。结果:取得了生物膜形成过程的不同时间点的CLSM图像,4h时细菌在盖玻片上粘附形成小菌落,8h和12h细菌聚集成簇,多糖基质产生并逐渐增多,至16h形成成熟生物膜结构;24h和48h生物膜已经播散,其结构变小。结论:应用免疫荧光技术和激光扫描共聚焦显微镜技术研究生物膜形成过程是一种简便可行的方法。     

活体染色显微技术和绿色荧光蛋白在本科实验教学中的应用

激光扫描共聚焦显微镜的原理和使用是本科生细胞生物学实验教学中的重要内容。目前,在细胞生物学实验教学中常使用绿色新鲜的植物叶片作为实验材料,在激光扫描共聚焦显微镜下对叶绿体的自发荧光进行观察。叶绿体的自发荧光信号强而且范围广,使学生难以清晰地理解特异性的荧光信号。该文通过对转p35S::Naa10-GFP基因拟南芥幼苗的根尖进行活体染色[碘化丙啶(propidium iodide,PI)和4′,6-二脒基-2-苯基吲哚(4′,6-diamidino-2-phenylindole,DAPI)染色],在不同的激发光下,收集相应的荧光信号,通过计算机辅助成像,获得不同颜色叠加的特异荧光信号图像。该实验设计简单可行,获得的图像清晰且便于观察,能够使初学者直观并且深刻理解激光扫描共聚焦显微镜的原理和使用方法,适合在高校细胞生物学实验教学中推广,同时也为研究其他蛋白质亚细胞定位提供技术参考。     

用于动物分类学研究领域的显微成像新技术

UV—C光学共聚焦显微图像系统集成了光学和数字图像分析技术，特别适用于采集非平面样品（高度变化范围超过了显微镜景深范围）的图像，它彻底解决了传统光学显微镜成像时高倍数与大景深不能共存的问题，使样品的不同高低部位都能清晰成像，可以获得像电镜图像一样的巨大景深和精致的细节，更能得到电镜图像所没有的真实色彩。UV—C以清晰直观的样品图片带给读者手绘图所不能达到的视觉效果，是动物分类学家研究和描述物种的好助手。     

用于动物分类学研究领域的显微成像新技术

UV—C光学共聚焦显微图像系统集成了光学和数字图像分析技术，特别适用于采集非平面样品（高度变化范围超过了显微镜景深范围）的图像，它彻底解决了传统光学显微镜成像时高倍数与大景深不能共存的问题，使样品的不同高低部位都能清晰成像，可以获得像电镜图像一样的巨大景深和精致的细节，更能得到电镜图像所没有的真实色彩。UV—C以清晰直观的样品图片带给读者手绘图所不能达到的视觉效果，是动物分类学家研究和描述物种的好助手。     

用于动物分类学研究领域的显微成像新技术

UV—C光学共聚焦显微图像系统集成了光学和数字图象分析技术,特别适用于采集非平面样品（高度变化范围超过了显微镜景深范围）的图象,它彻底解决了传统光学显微镜成像时高倍数与大景深不能共存的问题,使样品的不同高低部位都能清晰成像,可以获得像电镜图像一样的巨大景深和精致的细节,更能得到电镜图像所没有的真实色彩。UV—C以清晰直观的样品图片带给读者手绘图所不能达到的视觉效果,是动物分类学家研究和描述物种的好助手。     

活细胞钙动态的共聚焦扫描显微镜检测技术

共聚焦激光扫描显微镜（Confocal Laser Scarming Microscope,CLSM）广泛应用于活细胞内钙敏感探针标记的钙水平的动态测量。较之传统的显微镜CLSM在钙成像分析上有着不可比拟的优越性,但也存在一些缺陷,近些年陆续出现了一些针对这些缺陷的改善措施,如比率法、葡聚糖探针及其他一些新技术与共聚焦显微镜的联合应用等,并且出现了诸如双光子显微镜等新型激光共聚焦显微镜。随着共聚焦钙成像技术的不断发展进步,其今后的应用前景将会越越广阔。     

共聚焦显微技术简介

共聚焦显微镜在生物学研究中得到广泛应用,共聚焦显微技术按照显微镜构造原理的不同分成激光扫描共聚焦和数字共聚焦显微技术两种,共聚焦技术具有成像清晰,获得三维图像,进行多标记观察,活细胞内动态生理反应的实时观察记录,定性定量分析等优势,与共聚焦显微技术相关的技术有荧光染料的选择,荧光指示剂装载以及图像数据处理等。     

Analysis by Confocal Microscopy of the Structure of Cambium in the Hardwood Kalopanax pictus

An understanding of the morphology and the developmental changesin the shapes and dimensions of cambial cells requires three-dimensional(3-D) analysis of thick slices of tissue. We devised a simpleprotocol using confocal laser scanning microscopy (CLSM), withsafranin and acridine orange as fluorescent dyes and glycerolas the clearing and mounting medium, to examine the 3-D structureof the dormant cambium in Kalopanax pictus, a ring-porous hardwood.Optical sections and high contrast images provided clear informationabout the shapes and nuclear status of cambial cells, whichhave previously been difficult to determine using conventionalmicroscopy. The axially-oriented cambial cells were found tovary in shape, in particular around the rays, and were not alwaystypically fusiform. We evaluated the reliability of our methodby comparing results with those of a parallel study of the samematerial by standard analysis of serial sections of epoxy-embeddedspecimens. The images of optical sections obtained by CLSM wereof high quality and similar to images obtained by conventionallight microscopy of semi-thin mechanical sections. Use of theconfocal microscope provided a quick and easy method for visualizationof the structure of the cambium in thick hand-cut sections andfor studies of the developmental changes in cells from the cambiumto the xylem. Copyright 2000 Annals of Botany Company Confocal laser scanning microscopy, Kalopanax pictus, three-dimensional reconstruction, vascular cambium     

Contribution of neutrophil-derived myeloperoxidase in the early phase of fulminant acute respiratory distress syndrome induced by influenza virus infection

Because the pathogenesis of acute respiratory distress syndrome (ARDS) induced by influenza virus infection remains unknown, we can only improve on existing therapeutic interventions. To approach the subject, we investigated immunological etiology focused on cytokines and an acute lung damage factor in influenza-induced ARDS by using a PR-8 (A/H1N1)-infected mouse model. The infected mouse showed fulminant severe pneumonia with leukocyte infiltration, claudin alteration on tight junctions, and formation of hyaline membranes. In addition to interferon (IFN)-α, plenty of keratinocyte-derived chemokines (KC), macrophage inflammatory protein 2 (MIP-2), regulated on activation normal T-cell expressed and secreted (RANTES), and monocyte chemotactic protein 1 (MCP-1) were significantly released into bronchoalveolar lavage fluid (BALF) of the model. We focused on neutrophil myeloperoxidase (MPO) as a potent tissue damage factor and examined its contribution in influenza pneumonia by using mice genetically lacking in MPO. The absence of MPO reduced inflammatory damage with suppression of leakage of total BALF proteins associated with alteration of claudins in the lung. MPO(-/-) mice also suppressed viral load in the lung. The present study suggests that MPO-mediated OCl(-) generation affects claudin molecules and leads to protein leakage and viral spread as a damage factor in influenza-induced ARDS.     

Factor analysis of confocal image sequences of human papillomavirus DNA revealed with fast red in cervical tissue sections stained with TOTO-iodide

OBJECTIVE: To visualize and localize specific DNA sequences by fluorescence in situ hybridization, confocal laser scanning microscopy (CLSM) and factor analysis of biomedical image sequences (FAMIS). STUDY DESIGN: Human papillomavirus (HPV) DNA was identified in cervical tissue sections with biotinylated DNA probes recognizing the whole genome of HPV DNA types 18 and 16, and DNA-DNA hybrids were revealed by streptavidin-alkaline phosphatase and Fast Red (FR). Cell nuclei were counterstained with TOTO-iodide. Image sequences were obtained using successive dynamic or spectral sequences of images on different optical slices from CLSM. The location of fluorescent signals inside tissue preparations was determined by FAMIS and/or selection of filters at emission. Image sequences were summarized into a reduced number of images, called "factor images," and curves, called "factors." Factors estimate spectral patterns and depth emission profiles. Factor images correspond to spatial distributions of the different factors. RESULTS: We distinguished between FR and nucleus staining in HPV DNA hybridization signals by taking into account differences in their spectral patterns and improved visualization by taking into account differences in their focus (depth emission profiles). CONCLUSION: FAMIS, together with CLSM, made possible the detection and characterization of HPV DNA sequences in cells of cervical tissue sections.     

Novel methodology utilizing confocal laser scanning microscopy for systematic analysis in arthropods (Insecta)

The use of confocal laser scanning microscopy (CLSM) for imagingarthropod structures has the potential to profoundly impactthe systematics of this group. Three-dimensional visualizationof CLSM data provides high-fidelity, detailed images of minusculestructures unobtainable by traditional methods (for example,hand illustration, bright-field light microscopy, scanning electronmicroscopy). A CLSM data set consists of a stack of 2-D images("optical slices") collected from a transparent, fluorescentspecimen of suitable thickness. Small arthropod structures areparticularly well suited for CLSM imaging owing to the autofluorescentnature of their tissues. Here, we document the practical aspectsof a methodology developed for obtaining image stacks via CLSMfrom autofluorescent insect cuticular structures.     

Three-dimensional biofilm image reconstruction for assessing structural parameters

Parameters representing three-dimensional (3D) biofilm structure are quantified from confocal laser-scanning microscope (CLSM) images. These 3D parameters describe the distribution of biomass pixels within the space occupied by a biofilm; however, they lack a direct connection to biofilm activity. As a result, researchers choose a handful of parameters without there being a consensus on a standard set of parameters. We hypothesized that a select 3D parameter set could be used to reconstruct a biofilm image and that the reconstructed and original biofilm images would have similar activities. To test this hypothesis, an algorithm was developed to reconstruct a biofilm image with parameters identical to those of the original CLSM image. We introduced an objective method to assess the reconstruction algorithm by comparing the activities of the original and reconstructed biofilm images. We found that biofilm images with identical structural parameters showed nearly identical activities and substrate concentration profiles. This implies that the set containing all common structural parameters can successfully describe biofilm structure. This finding is significant, as it opens the door to the next step, of finding a smaller standard set of biofilm structural parameters that can be used to compare biofilm structure.     

miR-146b overexpression ameliorates lipopolysaccharide-induced acute lung injury in vivo and in vitro

Acute respiratory distress syndrome (ARDS) is a type of acute lung injury (ALI), which causes high morbidity and mortality. So far, effective clinical treatment of ARDS is still limited. Recently, miR-146b has been reported to play a key role in inflammation. In the present study, we evaluated the functional role of miR-146b in ARDS using the murine model of lipopolysaccharide (LPS)-induced ALI. The miR-146b expression could be induced by LPS stimulation, and miR-146b overexpression was required in the maintenance of body weight and survival of ALI mice; after miR-146b overexpression, LPS-induced lung injury, pulmonary inflammation, total cell and neutrophil counts, proinflammatory cytokines, and chemokines in bronchial alveolar lavage (BAL) fluid were significantly reduced. The promotive effect of LPS on lung permeability through increasing total protein, albumin and IgM in BAL fluid could be partially reversed by miR-146b overexpression. Moreover, in murine alveolar macrophages, miR-146b overexpression reduced LPS-induced TNF-α and interleukin (IL)-1β releasing. Taken together, we demonstrated that miR-146b overexpression could effectively improve the LPS-induced ALI; miR-146b is a promising target in ARDS treatment.     

丙肝病毒抗原在肝细胞癌组织中的定位——共聚焦激光扫描显微镜观察

应用共聚焦激光扫描显微镜（ＣｏｎｆｏｃａｌＬａｓｅｒＳｃａｎｎｉｎｇＭｉｃｒｏｓｃｏｐｅ,ＣＬＳＭ）观察免疫荧光标记的丙型肝炎病毒核心抗原（ＨＣＶＣＰ－１０）在肝癌组织中的表达,与免疫组化普通光镜观察结果比较,显示ＨＣＶＣＰ－１０抗原在肝细胞癌和癌周肝组织的定位特点,介绍ＣＬＳＭ在病理学中的应用。研究结果表明：ＨＣＶＣＰ－１０抗原大部分存在于胞浆,少部分存在于胞核,ＨＣＶ的表达有核内过程;ＨＣＶＣＰ－１０抗原在癌周肝组织的表达明显强于癌组织;ＣＬＳＭ比普通光镜在确定抗原定位上有更大的优越性     

黄磷及其化合物急性吸入致大鼠急性肺损伤或急性呼吸窘迫综合征模型的制作

目的建立黄磷及其化合物急性吸入致大鼠急性肺损伤（ALI）/急性呼吸窘迫综合征（ARDS）的模型。方法健康SD大鼠48只随机分为对照组以及实验组（0、4、12、24、48 h时间点处死）。采用自制染毒装置,间歇染毒形成ALI/ARDS模型。观察ALI/ARDS大鼠动脉血气分析以及肺系数和肺组织病理变化。结果肺损伤后大鼠动脉血气分析以及肺组织病理改变明显恶化,肺系数较对照组明显增大。结论成功地建立了黄磷及其化合物急性吸入致大鼠ALI/ARDS的模型,为黄磷及其化合物吸入中毒的防治研究提供良好实验基础,同时也适用于其他气体吸入致ARDS的实验研究。     

Applying CLSM to increment core surfaces for histometric analyses: A novel advance in quantitative wood anatomy

A novel procedure has been developed to conduct cell structure measurements on increment core samples of conifers. The procedure combines readily available hardware and software equipment. The essential part of the procedure is the application of a confocal laser scanning microscope (CLSM) which captures images directly from increment cores surfaced with the advanced WSL core-microtome. Cell wall and lumen are displayed with a strong contrast due to the monochrome black and green nature of the images. Consecutive images are merged into long images representing entire increment cores which are then analysed for cell structures in suitable software.     

Are Human Peripheral Nerves Sensitive to X-Ray Imaging?

Diagnostic imaging techniques play an important role in assessing the exact location, cause, and extent of a nerve lesion, thus allowing clinicians to diagnose and manage more effectively a variety of pathological conditions, such as entrapment syndromes, traumatic injuries, and space-occupying lesions. Ultrasound and nuclear magnetic resonance imaging are becoming useful methods for this purpose, but they still lack spatial resolution. In this regard, recent phase contrast x-ray imaging experiments of peripheral nerve allowed the visualization of each nerve fiber surrounded by its myelin sheath as clearly as optical microscopy. In the present study, we attempted to produce high-resolution x-ray phase contrast images of a human sciatic nerve by using synchrotron radiation propagation-based imaging. The images showed high contrast and high spatial resolution, allowing clear identification of each fascicle structure and surrounding connective tissue. The outstanding result is the detection of such structures by phase contrast x-ray tomography of a thick human sciatic nerve section. This may further enable the identification of diverse pathological patterns, such as Wallerian degeneration, hypertrophic neuropathy, inflammatory infiltration, leprosy neuropathy and amyloid deposits. To the best of our knowledge, this is the first successful phase contrast x-ray imaging experiment of a human peripheral nerve sample. Our long-term goal is to develop peripheral nerve imaging methods that could supersede biopsy procedures.