Positive charges in the cytoplasmic domain of Escherichia coli leader peptidase prevent an apolar domain from functioning as a signal.

Leader peptidase, an integral transmembrane protein of Escherichia coli, requires two apolar topogenic elements for its membrane assembly: a 'hydrophobic helper' and an internal signal. The highly basic cytoplasmic region between these domains is a translocation poison sequence, which we have shown blocks the function of a preceding signal sequence. We have used oligonucleotide-directed mutagenesis to remove positively charged residues within this polar domain to determine if it is the basic character in this region that has the negative effect on translocation. Our results show that mutations that remove two or more of the positively charged residues within the polar region no longer block membrane assembly of leader peptidase. In addition, when the translocation poison domain (residues 30-52) is replaced with six lysine residues, the preceding apolar domain cannot function as an export signal, whereas it can with six glutamic acids. Thus, positively charged residues within membrane proteins may have a major role in determining the function of hydrophobic domains in membrane assembly.     

The internal signal sequence of Escherichia coli leader peptidase is necessary, but not sufficient, for its rapid membrane assembly

Leader peptidase of Escherichia coli, a protein of 323 residues, has three hydrophobic domains. The first, residues 1-22, is the most apolar and is followed by a polar region (23-61) which faces the cytoplasm. The second hydrophobic domain (residues 62-76) spans the membrane. The third hydrophobic domain, which has a minimal apolar character, and the polar, carboxyl-terminal two-thirds of the protein are exposed to the periplasm. Deletion of either the amino terminus (residues 4-50) or the third hydrophobic region (residues 83-98) has almost no effect on the rate of leader peptidase membrane assembly, while the second hydrophobic domain is essential for insertion (Dalbey, R., and Wickner, W. (1987) Science 235, 783-787). To further define the roles of these domains, we have replaced the normal, cleaved leader sequence of pro-OmpA and M13 procoat with regions containing either the first or second apolar domain of leader peptidase. The second apolar domain supports the translocation of OmpA or coat protein across the plasma membrane, establishing its identity as an internal, uncleaved signal sequence. In addition to this sequence, we now find that leader peptidase needs either the amino-terminal domain or the third hydrophobic domain to permit its rapid membrane assembly. These results show that, although a signal sequence is necessary for rapid membrane assembly of leader peptidase, it is not sufficient.     

The role of the polar, carboxyl-terminal domain of Escherichia coli leader peptidase in its translocation across the plasma membrane

Leader peptidase, an integral membrane protein of Escherichia coli, is made without a cleavable leader sequence. It has 323 amino acid residues and spans the plasma membrane with a small amino-terminal domain exposed to the cytoplasm and a large, carboxyl-terminal domain exposed to the periplasm. We have investigated which regions of leader peptidase are necessary for its assembly across the membrane. Deletions were made in the carboxyl-terminal domain of leader peptidase, removing residues 141-222, 142-323, or 222-323. Protease accessibility was used to determine whether the polar, carboxyl-terminal domains of these truncated leader peptidases were translocated across the membrane. The removal of either residues 222-323 (the extreme carboxyl terminus) or residues 141-222 does not prevent leader peptidase membrane assembly. However, leader peptidase lacking both regions, i.e. amino acid residues 142-323, cannot translocate the remaining portion of its carboxyl terminus across the membrane. Our data suggest that the polar, periplasmic domain of leader peptidase contains information which is needed for membrane assembly.     

Characterization of the internal signal-anchor domain of Escherichia coli leader peptidase

Leader peptidase, an integral transmembrane protein of Escherichia coli, is synthesized without a cleavable amino-terminal leader peptide. Of the five domains that participate in the membrane assembly of this protein, one is an internal "signal" region. We have used oligonucleotide-directed mutagenesis to examine the properties of the internal signal that are crucial for leader peptidase assembly. For this purpose, the net charge at the amino terminus of the internal signal was changed from +2 to +1 and -1 and, at the carboxyl terminus of the signal, from 0 to -1 or +1. These mutations had no effect on the membrane assembly of leader peptidase, suggesting that the charges have little role in the signal function. The apolar core of this signal was disrupted by substitution of basic amino acids for apolar residues. Substitution of an arginyl residue at position 70, or two arginyl residues at position 67 and 69, prevented membrane assembly. However, substitution of an arginyl residue at position 66 or either arginyl or lysyl residue at position 68 was without effect. Thus, while the apolar character of the internal signal is important, the precise position of a charged residue determines its effect on assembly.     

Leader peptidase

The Escherichia coli leader peptidase has been vital for unravelling problems in membrane assembly and protein export. The role of this essential peptidase is to remove amino-terminal leader peptides from exported proteins after they have crossed the plasma membrane. Strikingly, almost all periplasmic proteins, many outer membrane proteins, and a few inner membrane proteins are made with cleavable leader peptides that are removed by this peptidase. This enzyme of 323 amino acid residues spans the membrane twice, with its large carboxyl-terminal domain protruding into the periplasm. Recent discoveries show that its membrane orientation is controlled by positively charged residues that border (on the cytosolic side) the transmembrane segments. Cleavable pre-proteins must have small residues at -1 and a small or aliphatic residue at -3 (with respect to the cleavage site). Leader peptidase does not require a histidine or cysteine amino acid for catalysis. Interestingly, serine 90 and aspartic acid 153 are essential for catalysis and are also conserved in a mitochondrial leader peptidase, which is 30.7% homologous with the bacterial enzyme over a 101-residue stretch.     

Amino acid substitutions in pilin of Pseudomonas aeruginosa. Effect on leader peptide cleavage, amino-terminal methylation, and pilus assembly.

A total of 37 separate mutants containing single and multiple amino acid substitutions in the leader and amino-terminal conserved region of the Type IV pilin from Pseudomonas aeruginosa were generated by oligonucleotide-directed mutagenesis. The effect of these substitutions on the secretion, processing, and assembly of the pilin monomers into mature pili was examined. The majority of substitutions in the highly conserved amino-terminal region of the pilin monomer had no effect on piliation. Likewise, substitution of several of the residues within the six amino acid leader sequence did not affect secretion and leader cleavage (processing), including replacement of one or both of the positively charged lysine residues with uncharged or negatively charged amino acids. One characteristic of the Type IV pili is the presence of an amino-terminal phenylalanine after leader peptide cleavage which is N-methylated prior to assembly of pilin monomers into pili. Substitution of the amino-terminal phenylalanine with a number of other amino acids, including polar, hydrophobic, and charged residues, did not affect proper leader cleavage and subsequent assembly into pili. Amino-terminal sequencing showed that the majority of substitute residues were also methylated. Substitution of the glycine residue at the -1 position to the cleavage site resulted in the inability to cleave the prepilin monomers and blocked the subsequent assembly of monomers into pili. These results indicate that despite the high degree of conservation in the amino-terminal sequences of the Type IV pili, N-methylphenylalanine at the +1 position relative to the leader peptide cleavage site is not strictly required for pilin assembly. N-Methylation of the amino acids substituted for phenylalanine was shown to have taken place in four of the five mutants tested, but it remains unclear as to whether pilin assembly is dependent on this modification. Recognition and proper cleavage of the prepilin by the leader peptidase appears to be dependent only on the glycine residue at the -1 position. Cell fractionation experiments demonstrated that pilin isolated from mutants deficient in prepilin processing and/or assembly was found in both inner and outer membrane fractions, indistinguishable from the results seen with the wild type.     

The translocation of negatively charged residues across the membrane is driven by the electrochemical potential: evidence for an electrophoresis-like membrane transfer mechanism.

The role of the membrane electrochemical potential in the translocation of acidic and basic residues across the membrane was investigated with the M13 procoat protein, which has a short periplasmic loop, and leader peptidase, which has an extended periplasmically located N-terminal tail. For both proteins we find that the membrane potential promotes membrane transfer only when negatively charged residues are present within the translocated domain. When these residues are substituted by uncharged amino acids, the proteins insert into the membrane independently of the potential. In contrast, when a positively charged residue is present within the N-terminal tail of leader peptidase, the potential impedes translocation of the tail domain. However, an impediment was not observed in the case of the procoat protein, where positively charged residues in the central loop are translocated even in the presence of the membrane potential. Intriguingly, several of the negatively charged procoat proteins required the SecA and SecY proteins for optimal translocation. The studies reported here provide insights into the role of the potential in membrane protein assembly and suggest that electrophoresis can play an important role in controlling membrane topology.     

Distinct domains of an oligotopic membrane protein are Sec-dependent and Sec-independent for membrane insertion.

Leader peptidase of Escherichia coli spans the plasma membrane twice with its amino terminus on the periplasmic surface of the membrane and its large carboxyl-terminal domain protruding into the periplasm. To monitor the transfer of the amino terminus of leader peptidase to the periplasm, we have constructed a fusion protein between the 18-residue amino-terminal periplasmic domain of Pf3 bacteriophage coat protein and the beginning of leader peptidase. We find that neither the SecA or SecY proteins nor a transmembrane electrochemical potential is required for insertion of the amino terminus, while the transfer of the carboxyl-terminal domain of leader peptidase has these requirements. The first 35 residues of leader peptidase, which include the first hydrophobic domain and the carboxyl-terminal positively charged cluster, are sufficient to insert the amino terminus. When positively charged residues are introduced before the first transmembrane segment, translocation of the amino terminus is abolished. These studies in protein membrane topogenesis, showing that there are different requirements for amino and carboxyl termini insertion, indicate that multiple mechanisms exist even within the same protein.     

Prerequisites for terminal processing of thylakoidal Tat substrates

In bacteria and chloroplasts, the Tat (twin arginine translocation) system is capable of translocating folded passenger proteins across the cytoplasmic and thylakoidal membranes, respectively. Transport depends on signal peptides that are characterized by a twin pair of arginine residues. The signal peptides are generally removed after transport by specific processing peptidases, namely the leader peptidase and the thylakoidal processing peptidase. To gain insight into the prerequisites for such signal peptide removal, we mutagenized the vicinity of thylakoidal processing peptidase cleavage sites in several thylakoidal Tat substrates. Analysis of these mutants in thylakoid transport experiments showed that the amino acid composition of both the C-terminal segment of the signal peptide and the N-terminal part of the mature protein plays an important role in the maturation process. Efficient removal of the signal peptide requires the presence of charged or polar residues within at least one of those regions, whereas increased hydrophobicity impairs the process. The relative extent of this effect varies to some degree depending on the nature of the precursor protein. Unprocessed transport intermediates with fully translocated passenger proteins are found in membrane complexes of high molecular mass, which presumably represent Tat complexes, as well as free in the lipid bilayer. This seems to indicate that the Tat substrates can be laterally released from the complexes prior to processing and that membrane transport and terminal processing of Tat substrates are independent processes.     

Generalized transposon shuttle mutagenesis in Neisseria gonorrhoeae: a method for isolating epithelial cell invasion-defective mutants

Hybrid genes were constructed to express bifunctional hybrid proteins in which staphyloccal nuclease A with or without an amino-terminai OmpA signal sequence was fused with TEM β-lactamase (at the carboxyl terminal side) using the signal peptide of the major outer membrane lipoprotein of Escherichia coli as an internal linker. The hybrid proteins were found to be inserted in the membrane. Orientation of the hybrid protein with the OmpA signal peptide showed that the nuclease was translocated into the periplasm and the β-lactamase remained in the cytoplasm. This indicates that the cleavable OmpA signal peptide served as a secretory signal for nuclease and the internal lipoprotein signal served as the transmembrane anchor, in the absence of the OmpA signal sequence the topology of the hybrid protein was reversed indicating that the internal lipoprotein signal peptide initially served as the signal peptide for the secretion of the carboxy terminal β-lactamase domain across the membrane and subsequently as a membrane anchoring signal. The role of charged amino acids in the translocation and transmembrane orientation of membrane proteins was also analysed by introducing charged amino acids to either or both sides of the internal lipoprotein signal sequence in the bifunctional hybrid proteins in the absence of the amino-terminal signal sequence. Introduction of two lysine residues at the carboxy-terminal side of the internal signal sequence reversed the topology of the transmembrane protein by translocating the aminoterminal nuclease domain across the membrane, leaving the carboxyl terminal β-actamase domain in the cytoplasm. When three more lysine residues were added to the amino-terminal side of the internal signal sequence of the same construct the membrane topology flipped back to the original orientation. A similar reversion of the topology could be obtained by introducing negatively charged residues at the amino-terminal side of the internal signal sequence. Present results demonstrate for the first time that a bifunctional transmembrane protein can be engineered to assume either of the two opposite orientations and that charge balance around the transmembrane domain is a major factor in controlling the topology of a transmembrane protein.     

Maturation and secretion of the non-typable Haemophilus influenzae HMW1 adhesin: roles of the N-terminal and C-terminal domains

Non-typable Haemophilus influenzae is a common cause of human disease and initiates infection by colonizing the upper respiratory tract. The non-typable H. influenzae HMW1 and HMW2 adhesins mediate attachment to human epithelial cells, an essential step in the process of colonization. HMW1 and HMW2 have an unusual N-terminus and undergo cleavage of a 441-amino-acid N-terminal fragment during the course of their maturation. Following translocation across the outer membrane, they remain loosely associated with the bacterial surface, except for a small amount that is released extracellularly. In the present study, we localized the signal sequence to the first 68 amino acids, which are characterized by a highly charged region from amino acids 1-48, followed by a more typical signal peptide with a predicted leader peptidase cleavage site after the amino acid at position 68. Additional experiments established that the SecA ATPase and the SecE translocase are essential for normal export and demonstrated that maturation involves cleavage first between residues 68 and 69, via leader peptidase, and next between residues 441 and 442. Site-directed mutagenesis revealed that HMW1 processing, secretion and extracellular release are dependent on amino acids in the region between residues 150 and 166 and suggested that this region interacts with the HMW1B outer membrane translocator. Deletion of the C-terminal end of HMW1 resulted in augmented extracellular release and elimination of HMW1-mediated adherence, arguing that the C-terminus may serve to tether the adhesin to the bacterial surface. These observations suggest that the HMW proteins are secreted by a variant form of the general secretory pathway and provide insight into the mechanisms of secretion of a growing family of Gram-negative bacterial exoproteins.     

Cysteine residues in the transmembrane regions of M13 procoat protein suggest that oligomeric coat proteins assemble onto phage progeny

The M13 phage assembles in the inner membrane of Escherichia coli. During maturation, about 2,700 copies of the major coat protein move from the membrane onto a single-stranded phage DNA molecule that extrudes out of the cell. The major coat protein is synthesized as a precursor, termed procoat protein, and inserts into the membrane via a Sec-independent pathway. It is processed by a leader peptidase from its leader (signal) peptide before it is assembled onto the phage DNA. The transmembrane regions of the procoat protein play an important role in all these processes. Using cysteine mutants with mutations in the transmembrane regions of the procoat and coat proteins, we investigated which of the residues are involved in multimer formation, interaction with the leader peptidase, and formation of M13 progeny particles. We found that most single cysteine residues do not interfere with the membrane insertion, processing, and assembly of the phage. Treatment of the cells with copper phenanthroline showed that the cysteine residues were readily engaged in dimer and multimer formation. This suggests that the coat proteins assemble into multimers before they proceed onto the nascent phage particles. In addition, we found that when a cysteine is located in the leader peptide at the -6 position, processing of the mutant procoat protein and of other exported proteins is affected. This inhibition of the leader peptidase results in death of the cell and shows that there are distinct amino acid residues in the M13 procoat protein involved at specific steps of the phage assembly process.     

DNA sequence of the F traALE region that includes the gene for F pilin

The complete sequence of a 1.4-kilobase PstI fragment containing the F transfer genes traA, -L, and -E is presented. The traA reading frame has been located both genetically and by comparing the primary structure of F pilin (the traA product) predicted by the DNA sequence to the amino acid composition and sequence of N- and C-terminal peptides isolated from purified F pilin. Taken together, these data show that there is a leader peptide of 51 amino acids and that F pilin contains 70 amino acids, giving molecular weights of 13,200 for F propilin and 7,200 for mature F pilin. Secondary structure predictions for F pilin revealed a reverse turn that precedes the sequence Ala-Met-Ala51, a classic signal peptidase cleavage site. The N-terminal alanine residue is blocked by an acetyl group as determined by 1H-nuclear magnetic resonance spectroscopy. The traL and traE genes encode proteins of molecular weights 10,350 and 21,200, respectively. According to DNA sequence predictions, these proteins do not contain signal peptide leader sequences. Secondary structure predictions for these proteins are in accord with traLp and traEp being membrane proteins in which hydrophobic regions capable of spanning the membrane are linked by sequences that form turns and carry positively charged residues capable of interacting with the membrane surface.     

Structural features in the NH2-terminal region of a model eukaryotic signal peptide influence the site of its cleavage by signal peptidase

The 20-amino acid signal peptide of human pre (delta pro)apolipoprotein A-II contains the tripartite domain structure typical of eukaryotic prepeptides, i.e. a positively charged NH2-terminal (n) region, a hydrophobic core (h) region, and a COOH-terminal polar domain (c region). This signal sequence has multiple potential sites for cotranslational processing making it an attractive model for assessing the consequences of systematic structural alterations on the site selected for signal peptidase cleavage. We previously analyzed 40 mutant derivatives of this model preprotein using an in vitro translation/canine microsome processing assay. The results showed that the position of the boundary between the h and c regions and properties of the -1 residue are critical in defining the site of cotranslational cleavage. To investigate whether structural features in the NH2-terminal region of signal peptides play a role in cleavage specificity, we have now inserted various amino acids between the positively charged n region (NH2-Met-Lys) and the h region of a "parental" pre(delta pro)apoA-II mutant that has roughly equal cleavage between Gly18 decreases and Gly20 decreases. Movement of the n/h boundary toward the NH2 terminus results in a dramatic shift in cleavage to Gly18 decreases. Replacement of the Lys2 residue with hydrophilic, negatively charged residues preserves the original sites of cleavage. Replacement with a hydrophobic residue causes cleavage to shift "upstream." Simultaneous alteration of the position of n/h and h/c boundaries has an additive effect on the site of signal peptidase cleavage. None of these mutations produced a marked decrease in the efficiency of in vitro cotranslational translocation or cleavage. However, in sequence contexts having poor signal function, introduction of hydrophobic residues between the n and h regions markedly improved the efficiency of translocation/processing. We conclude that the position of the n/h boundary as well as positioning of the h/c boundary affects the site of cleavage chosen by signal peptidase.     

A small hydrophobic domain anchors leader peptidase to the cytoplasmic membrane of Escherichia coli

Leader peptidase is an enzyme of the Escherichia coli cytoplasmic membrane which removes amino-terminal leader sequences from many secreted and membrane proteins. Three potential membrane-spanning segments exist in the first 98 amino acids of leader peptidase. We have characterized the topology of leader peptidase based on its sensitivity to protease digestion. Proteinase K and trypsin treatment of right-side-out inner membrane vesicles and spheroplasts yields protected fragments of approximately 80 and 105 amino acid residues, respectively. We have shown that both fragments are derived from the amino terminus of the protein and that the smaller protected peptide can be derived from the larger. Removal of the third potential membrane-spanning segment (residues 82-98) does not affect the size of the proteinase K-protected fragment but does reduce the size of the trypsin-protected peptide. Because the proteinase K-protected fragment is about 9000 daltons, is derived from the amino terminus of leader peptidase, and its size is not affected when amino acids 82-98 are removed from the protein, it must extend from the amino terminus to approximately residue 80. Likewise, the trypsin-protected fragment must extend from the amino terminus to about residue 105. These data suggest a model for the orientation of leader peptidase in which the second hydrophobic stretch (residues 62-76) spans the cytoplasmic membrane and the third hydrophobic stretch resides in the periplasmic space.     

Molecular cloning of a light-inducible gene (lipA) encoding a novel pilin from Arthrobacter photogonimos

Development of pili on cells of Arthrobacter photogonimos is induced by photo-oxidative conditions. The nucleotide sequence was determined of a light-inducible gene (lipA) that encodes the precursor of a light-inducible pilin (designated LIP), a polypeptide of 212 amino acids. The N-terminal leader peptide includes a typical signal sequence with a consensus cleavage site for signal peptidase I after residue 28, which should generate N-terminal arginine. However, the next amino acid, alanine, is the N-terminal residue of the mature protein. The abundance of charged amino acids (27% of total), a calculated pI of 9.98, and recovery of mostly monomers when cells were washed with 1 M NaCl suggest that electrostatic interactions play a dominant role in association of LIP, a novel mechanism for assembly of pili.     

Requirements for substrate recognition by bacterial leader peptidase.

Many secreted and membrane proteins have amino-terminal leader peptides which are essential for their insertion across the membrane bilayer. These precursor proteins, whether from prokaryotic or eukaryotic sources, can be processed to their mature forms in vitro by bacterial leader peptidase. While different leader peptides have shared features, they do not share a unique sequence at the cleavage site. To examine the requirements for substrate recognition by leader peptidase, we have truncated M13 procoat, a membrane protein precursor, from both the amino- and carboxy-terminal ends with specific proteases or chemical cleavage agents. The fragments isolated from these reactions were assayed as substrates for leader peptidase. A 16 amino acid residue peptide which spans the leader peptidase cleavage site is accurately cleaved. Neither the basic amino-terminal region nor most of the hydrophobic central region of the leader peptide are essential for accurate cleavage.     

Processing of the dual targeted precursor protein of glutathione reductase in mitochondria and chloroplasts

Pea glutathione reductase (GR) is dually targeted to mitochondria and chloroplasts by means of an N-terminal signal peptide of 60 amino acid residues. After import, the signal peptide is cleaved off by the mitochondrial processing peptidase (MPP) in mitochondria and by the stromal processing peptidase (SPP) in chloroplasts. Here, we have investigated determinants for processing of the dual targeting signal peptide of GR by MPP and SPP to examine if there is separate or universal information recognised by both processing peptidases. Removal of 30 N-terminal amino acid residues of the signal peptide (GRDelta1-30) greatly stimulated processing activity by both MPP and SPP, whereas constructs with a deletion of an additional ten amino acid residues (GRDelta1-40) and deletion of 22 amino acid residues in the middle of the GR signal sequence (GRDelta30-52) could be cleaved by SPP but not by MPP. Numerous single mutations of amino acid residues in proximity of the cleavage site did not affect processing by SPP, whereas mutations within two amino acid residues on either side of the processing site had inhibitory effect on processing by MPP with a nearly complete inhibition for mutations at position -1. Mutation of positively charged residues in the C-terminal half of the GR targeting peptide inhibited processing by MPP but not by SPP. An inhibitory effect on SPP was detected only when double and triple mutations were introduced upstream of the cleavage site. These results indicate that: (i) recognition of processing site on a dual targeted GR precursor differs between MPP and SPP; (ii) the GR targeting signal has similar determinants for processing by MPP as signals targeting only to mitochondria; and (iii) processing by SPP shows a low level of sensitivity to single mutations on targeting peptide and likely involves recognition of the physiochemical properties of the sequence in the vicinity of cleavage rather than a requirement for specific amino acid residues.     

Efficient translocation of positively charged residues of M13 procoat protein across the membrane excludes electrophoresis as the primary force for membrane insertion.

The coat protein of bacteriophage M13 is inserted into the Escherichia coli plasma membrane as a precursor protein, termed procoat, with a typical leader peptide of 23 amino acid residues. Its membrane insertion requires the electrochemical potential but not the cellular components SecA and SecY. Since the electrochemical gradients result in the periplasmic side of the membrane being positively charged, the membrane potential could contribute to the transfer of the negatively charged central region of procoat across the membrane. Here we demonstrate that the central domain following the leader peptide can be translocated across the membrane even when the net charge of the region is changed from -3 to +3. This rules out an electrophoresis-like insertion mechanism for procoat. We also show that the sec independence of procoat insertion is linked to the presence of the second apolar domain. The deletion of most of the second apolar domain from a procoat fusion protein results in sec dependent membrane insertion of the hybrid protein. Moreover, like other proteins that require the sec genes, translocation of this sec dependent procoat protein is inhibited when positively charged residues are introduced after the leader peptide. Loop models involving one or two hydrophobic regions are presented that account for the differences in tolerance of positively charged residues.