Capillary gel electrophoresis for rapid, high resolution DNA sequencing.

Capillary gel electrophoresis has been demonstrated for the separation and detection of DNA sequencing samples. Enzymatic dideoxy nucleotide chain termination was employed, using fluorescently tagged oligonucleotide primers and laser based on-column detection (limit of detection is 6,000 molecules per peak). Capillary gel separations were shown to be three times faster, with better resolution (2.4 x), and higher separation efficiency (5.4 x) than a conventional automated slab gel DNA sequencing instrument. Agreement of measured values for velocity, resolution and separation efficiency with theory, predicts further improvements will result from increased electric field strengths (higher voltages and shorter capillaries). Advantages of capillary gel electrophoresis for automatic DNA sequencing instruments and for genomic sequencing are discussed.     

Effect of "stacking" on the resolving power of ultrathin-layer two-dimensional gel electrophoresis

The resolving power of two-dimensional ultrathin-layer polyacrylamide gel electrophoresis with and without "stacking" was investigated. Side-by-side analysis shows that the use of a properly adjusted upper gel improves the resolution and reproducibility of this sensitive analytical method. The effects of various detergents (Nonidet-P40, Zwittergent, urea) on the ultrathin-layer polyacrylamide gel electrophoresis were also investigated. For this case, whole cell proteins of Pseudomonas aeruginosa and Staphylococcus aureus treated with different detergents were electrofocused in the presence of the same detergents.     

Two-dimensional gel electrophoresis of wool intermediate filament proteins

Two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) methods have been used to provide high-resolution separation of wool intermediate filament proteins (IFPs). An improved method of extraction was developed based on a previously published method. The improved method for extraction eliminates the use of dialysis and freeze-drying between the extraction and rehydration steps, allowing the extraction and rehydration for the first dimension gel to be achieved in one day. Improvements to the method for maintaining reducing conditions and chaotrope constitution, combined with low %T polyacrylamide gels, allowed the high-resolution separation of the two keratin IFP families and their individual family members. The IFPs were separated to produce a clearly defined spot pattern of higher intensity, with numerous minor spots not previously observed, and a marked improvement in the vertical resolution. Further work to analyse the composition of each of the protein spots has been made much easier by being able to separate the IFPs into discrete spots.     

SDS microslab linear gradient polyacrylamide gel electrophoresis

An improved sodium dodecyl sulfate (SDS) microslab linear gradient polyacrylamide gel electrophoresis (PAGE) technique has been developed. Several important features present in this microslab SDS-PAGE system include (1) high resolution and sensitivity; (2) rapid electrophoresis, staining, and destaining; (3) high reproducibility; and (4) low cost of construction and operation. Several gels are east at once between unmodified commercially available microslides separated by 0.5-mm thick Teflon spacers. The total time from start of electrophoresis to completion of destaining spans 2 hr. Gels are dried between transparent cellophane membranes in 1 hr and can be easily scanned with a microdensitometer. As little as 20 ng of a purified protein stained with Coomassie blue is detectable.     

Capillary affinity gel electrophoresis

Capillary affinity gel electrophoresis is a new technique for the recognition of the specific DNA base and/or sequence. This technology is also applicable to the characterization of binding properties of DNA-based drugs, chiral separation, and the selective separation of antibody mimetics using imprinted polymers. This article reviews the present state of studies on the capillary affinity gel electrophoresis, including the principle, theory, methods, and applications of this technology. The great potential of capillary affinity gel electrophoresis for the detection of the mutation onDNA is illustrated.     

Microfabricated polymer chip for capillary gel electrophoresis

A polymer (PDMS: poly(dimethylsiloxane)) microchip for capillary gel electrophoresis that can separate different sizes of DNA molecules in a small experimental scale is presented. This microchip can be easily produced by a simple PDMS molding method against a microfabricated master without the use of elaborate bonding processes. This PDMS microchip could be used as a single use device unlike conventional microchips made of glass, quartz or silicon. The capillary channel on the chip was partially filled with agarose gel that can enhance separation resolution of different sizes of DNA molecules and can shorten the channel length required for the separation of the sample compared to capillary electrophoresis in free-flow or polymer solution format. We discuss the optimal conditions for the gel preparation that could be used in the microchannel. DNA molecules were successfully driven by an electric field and separated to form bands in the range of 100 bp to 1 kbp in a 2.0% agarose-filled microchannel with 8 mm of effective separation length.     

Pulsed field gel electrophoresis techniques for separating 1- to 50-kilobase DNA fragments

Conventional agarose gel electrophoresis separates DNA using a static electric field. The maximum size limit for separation of DNA by this method is about 20 kilobase pairs (kb). A number of new electrophoretic techniques which employ periodic reorientation of electric fields permit separation of DNA well beyond this size limit. We sought to determine whether the use of very fast (millisecond) field switching could improve separation of DNA in the size range of 1 to 50 kb. Additionally, we have compared the resolution obtained with each of the different field switching regimens for DNA in this size range. Switching intervals of from 0.2 to 900 ms were used with unidirectional pulsing of a single electric field, with pulsed field gels, and with field inversion gel electrophoresis. Plotting the mobility of DNA as a function of size demonstrates that under the conditions used, each of these techniques offers comparable resolution. We also have examined the separation obtained when field inversion gels are run with forward and reverse fields of equal voltage and different durations, versus using fields of equal duration and different voltages. Field inversion which uses forward and reverse fields of different voltages yields resolution which is superior to the other methods examined.     

High resolution mini-two-dimensional gel electrophoresis of yeast ribosomal proteins

By applying two-dimensional gel electrophoresis (basic urea/acidic urea) in a mini-form yeast ribosomal proteins were separated with a high resolution. On basis of this separation pattern a standard nomenclature for the yeast ribosomal proteins is proposed.     

Coomassie blue-sodium dodecyl sulfate-polyacrylamide gel electrophoresis for direct visualization of polypeptides during electrophoresis

A method for the direct visualization of Coomassie blue-stained polypeptide bands during electrophoresis with subsequent elution of polypeptides and removal of sodium dodecyl sulfate (SDS) and Coomassie blue is described. Primarily it is intended as a means for easy and--because there is no protein fixation step--nearly quantitative recovery of separated polypeptides for amino acid sequencing. It may also be used to obtain rapid information about the protein patterns during a run. Together with our new high resolution SDS-polyacrylamide gel electrophoresis system for small proteins and polypeptides (H. Sch?gger and G. Von Jagow (1987) Anal. Biochem. 166, 368-379) the method described allows the preparative separation of protein fragments as even protein fragments between 1 and 3.5 kDa are easily detected.     

High-performance separation of polynucleotides by capillary gel electrophoresis.

Capillary gel electrophoresis was applied to the high speed separation of DNA and RNA. Factors affecting resolution and speed were optimized for the single base resolution of polynucleotides. Polynucleotides up to 350 bases were completely resolved within 38 min under optimum conditions.     

Two-dimensional polyacrylamide gel electrophoresis: an improved method for ribosomal proteins

A two-dimensional electrophoresis system for analysis of ribosomal proteins with several advantages over previous systems is described. The general features of this system are: (1) first-dimension separation on the basis of mobility at pH 5.0 in 8 m urea and 4% polyacrylamide; (2) second-dimension separation on the basis of molecular weight using dodecyl sulfate detergent; (3) rapid electrophoretic shift between first- and second-dimension separation conditions; (4) high resolution separation can be obtained on 10-cm² slabs with proteins from approximately 100 μg of ribosomal subunits; (5) capacity for handling up to 10 samples at a time, with electrophoresis complete within about 10 hr; and (6) the apparatus is relatively simple and inexpensive to construct and use.     

Influence of sample preparation technique on two-dimensional gel electrophoresis of proteins from Porphyromonas gingivalis

Sample preparation methods were compared for two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) of cellular proteins from the proteolytic bacterium Porphyromonas gingivalis. Standard solubilization buffer yielded poorly resolved protein spots, but pre-treatment of cells with trichloroacetic acid or inclusion of the protease inhibitor TLCK during solubilization improved definition and separation. The latter approach allowed reliable detection of a 55 kDa immunodominant surface antigen by Western immunoblotting. Further improvements in resolution occurred when SDS was included in the sample preparation. Thus, controlling proteolysis and optimizing protein solubilization were essential for reproducible separations and maximal protein recovery during 2D-PAGE of P. gingivalis.     

Improved resolution with one-dimensional polyacrylamide gel electrophoresis: myofibrillar proteins from typed single fibers of human muscle

Standard procedures for one-dimensional discontinuous sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis and silver staining were modified to give more effective separation and an improved resolution of human skeletal muscle proteins. In this system, an electrophoresis buffer composed of 100 mM L-isoleucine, 25 mM Tris base, and 0.1% SDS was used. The separating gel consisted of 16% acrylamide with N,N'-methylenebisacrylamide as a crosslinker (1:23), 0.4% SDS, 1.5 M Tris-HCl, pH 8.8. By the present procedure, the slow and the fast forms of myosin light chains (LCs, LCf) and other contractile proteins from human muscle could be better separated. The silver stain is based on a combination of methods previously described. The modified method requires a small fragment of a single fiber to observe as few as 10 ng of myofibrillar muscle proteins. The described simplifications made it possible to assay and compare up to 40 single fibers in the same electrophoretic run. Improved separation of other proteins migrating at basic pH could be achieved by a similar approach.     

Computer-controlled discontinuous rotating gel electrophoresis for separation of very large DNA molecules

The newly designed equipment for alternating field gel electrophoresis which permits the separation of very large DNA molecules and the simultaneous analysis of up to 35 samples is described. The field alternation is effected by intermittently rotating the submerged agarose gel by optitional angles. The time intervals between changes of position are controlled by a computer program driving a simple switching device which was designed to suit any technique using periodic switching or inversion of the electrical field. Because the electrophoresis unit provides an absolutely homogeneous electrical field, no distortion of migration lanes occurs and the resolution is very good. Moreover, by using a switching time interval gradient an almost perfect linear relationship between migration distances and molecule sizes in the range of about 100-1250 kilobase pairs is observed. In two-dimensional separations, different switching time programs for the first and second dimension allow maximum resolution of selected size ranges. Field inversion gel electrophoresis is possible as well. The performance of the method is demonstrated by comparing the chromosome sizes of different yeast strains.     

Comparative analysis of protein aggregates by blue native electrophoresis and subsequent sodium dodecyl sulfate-polyacrylamide gel electrophoresis in a three-dimensional geometry gel

We describe the comparative analysis of protein aggregates by combining blue native electrophoresis and subsequent sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) using a 3-D geometry gel for simultaneous processing of many samples. The first native electrophoresis step, separating the aggregates, is carried out for a series of samples in parallel lanes within a slab gel. This gel is then placed on the top surface of a cylindrical, 3-D geometry gel for the second denaturing electrophoresis step, separating the proteins composing the aggregates. The samples migrate parallel to the vertical axis of the gel cylinder. Data are acquired online by photodetection of laser-induced fluorescence during electrophoresis. For this purpose, the samples are fluorescently labeled within the slab gel after the first separation step. A 3-D geometry gel separates the equivalent of many conventional SDS slab gels represented by vertical layers in the 3-D gel body. In this way, many samples are analyzed in the same gel under identical conditions, improving comparability and resolution and making the process considerably more efficient. This novel technique allowed the identification of several aggregate classes of recombinant proteins expressed in bacteria. We observed that proteins preferentially bind to homolog polypeptides, but also seem to form a trapping mesh co-aggregating with other proteins. The aggregation pattern revealed by this technique supplements data obtained from standard two-dimensional gel electrophoresis analysis. We expect interesting applications, for instance in aggregate monitoring of clinical samples. It should be feasible to quickly gain a diagnostic picture during amyloid-related neurodegenerative disease development or to observe drug effects on protein aggregation.     

Analysis of glycopeptides as borate complexes by polyacrylamide gel electrophoresis

A new method using polyacrylamide gel electrophoresis in a Tris-borate buffer to analyze Pronase-derived glycopeptides is described. Examination of immunoglobulin, Sindbis virus, and ovalbumin-radiolabeled glycopeptides by this system demonstrates a pattern similar to that seen after Bio-Gel-P-6 chromatography and, in addition, exposes a heterogeneity in the immunoglobulin and Sindbis virus glycopeptides not apparent after gel filtration. The resolution of glycopeptides by gel electrophoresis depends on the inclusion of borate ions in the sample, the gel, and the electrophoresis buffer. The borate ions react with neutral sugars, converting them to charged complexes which migrate during electrophoresis. The number of borate ions bound to a glycopeptide is a function of the composition, sequence, and linkages of the carbohydrates. Gel electrophoresis of glycopeptides in a borate buffer has several advantages: (1) The method requires no new equipment or special skills beyond those necessary for conventional polyacrylamide gel electrophoresis; (2) when performed on a slab gel, up to 24 samples can be analyzed simultaneously; and (3) since detection is by radio-autography, small amounts of radiolabeled glycopeptides can be visualized by prolonging the exposure time. These characteristics are advantageous for studies of glycopeptides based on digestion products resulting from incubations with specific exo- and endo-glycosidases. Untreated glycopeptides have been compared on the same gel with glycopeptides sequentially treated with different glycosidases to gain structural information.     

Sequential two-dimensional and acetic acid/urea/Triton X-100 gel electrophoresis of proteins

A method is described which combines the resolving power of two-dimensional gel electrophoresis with that of acetic acid/urea/Triton X-100 gel electrophoresis, avoiding the necessity of eluting protein from the gels at any step of the procedure. The combination of electrophoretic separation on the basis of charge, mass, and hydrophobic properties of the proteins has the potential of resolving modified forms and isoforms present in very complex protein populations. The technique can be used for analytical purposes, or it may be scaled up to yield microgram amounts of highly purified proteins. The resolution obtained by tandem application of nonequilibrium pH gradient electrophoresis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and polyacrylamide gel electrophoresis in the presence of nonionic detergent was evaluated using crude nuclear proteins of the nematode Caenorhabditis elegans.     

Separation of long RNA by agarose–formaldehyde gel electrophoresis

We describe a method to facilitate electrophoretic separation of high-molecular-weight RNA species, such as ribosomal RNAs and their precursors, on agarose–formaldehyde gels. Two alternative “pK-matched” buffer systems were substituted for the traditionally used Mops-based conductive medium. The key advantages include shortened run times, a 5-fold reduction in formaldehyde concentration, a significantly improved resolution of long RNAs, and consistency in separation. The new procedure has a streamlined work flow that helps to minimize errors and is broadly applicable to agarose gel electrophoresis of RNA samples and their subsequent analysis by Northern blotting.